The Mutt Next Generation E-Mail Client
- by Andreas Krennmair and others originally based on mutt by Michael Elkins and
- others
+ Andreas Krennmair
+
+ <ak@synflood.at>
+
+ Michael Elkins
+
+ <me@cs.hmc.edu>
version devel-r473
Abstract
Michael Elinks on mutt, circa 1995: ``All mail clients suck. This one just
- sucks less.'' - Sven Guckes on mutt, ca. 2003: ``But it still sucks!''
+ sucks less.''
+
+ Sven Guckes on mutt, ca. 2003: ``But it still sucks!''
--------------------------------------------------------------------------
1. Acknowledgments
+ List of Tables
+
+ 2.1. Default Menu Movement Keys
+
+ 2.2. Built-In Editor Functions
+
+ 2.3. Default Index Menu Bindings
+
+ 2.4. Default Pager Menu Bindings
+
+ 2.5. ANSI Escape Sequences
+
+ 2.6. ANSI Colors
+
+ 2.7. Default Thread Function Bindings
+
+ 2.8. Default Mail Composition Bindings
+
+ 2.9. Default Compose Menu Bindings
+
+ 2.10. PGP Key Menu Flags
+
+ 3.1. Alternative Key Names
+
+ 4.1. Default Sidebar Function Bindings
+
+ 7.1. Mutt-NG Command Line Options
+
+ 7.2. Patterns
+
+ 7.3. Obsolete Variables
+
Chapter 1. Introduction
Table of Contents
regular expression searches and a powerful pattern matching language for
selecting groups of messages.
- This documentation additionally contains documentation to Mutt-NG, a fork
+ This documentation additionally contains documentation to Mutt-NG ,a fork
from Mutt with the goal to fix all the little annoyances of Mutt, to
integrate all the Mutt patches that are floating around in the web, and to
add other new features. Features specific to Mutt-ng will be discussed in
3. Mailing Lists
- o mutt-ng-users@lists.berlios.de -- This is where the mutt-ng user
+ o <mutt-ng-users@lists.berlios.de>: This is where the mutt-ng user
support happens.
- o mutt-ng-devel@lists.berlios.de -- The development mailing list for
+ o <mutt-ng-devel@lists.berlios.de>: The development mailing list for
mutt-ng
4. Software Distribution Sites
3. Moving Around in Menus
- Information is presented in menus, very similar to ELM. Here is a table
- showing the common keys used to navigate menus in Mutt-ng.
-
- j or Down next-entry move to the next entry
- k or Up previous-entry move to the previous entry
- z or PageDn page-down go to the next page
- Z or PageUp page-up go to the previous page
- = or Home first-entry jump to the first entry
- * or End last-entry jump to the last entry
- q quit exit the current menu
- ? help list all key bindings for the current menu
+ Information is presented in menus, very similar to ELM. Here is a
+ tableshowing the common keys used to navigate menus in Mutt-ng.
+
+ Table 2.1. Default Menu Movement Keys
+
+ +------------------------------------------------------------------------+
+ | Key | Function | Description |
+ |-------------+----------------+-----------------------------------------|
+ | j or Down | next-entry | move to the next entry |
+ |-------------+----------------+-----------------------------------------|
+ | k or Up | previous-entry | move to the previous entry |
+ |-------------+----------------+-----------------------------------------|
+ | z or PageDn | page-down | go to the next page |
+ |-------------+----------------+-----------------------------------------|
+ | Z or PageUp | page-up | go to the previous page |
+ |-------------+----------------+-----------------------------------------|
+ | = or Home | first-entry | jump to the first entry |
+ |-------------+----------------+-----------------------------------------|
+ | * or End | last-entry | jump to the last entry |
+ |-------------+----------------+-----------------------------------------|
+ | q | quit | exit the current menu |
+ |-------------+----------------+-----------------------------------------|
+ | ? | help | list all key bindings for the current |
+ | | | menu |
+ +------------------------------------------------------------------------+
4. Editing Input Fields
input textual data such as email addresses or filenames. The keys used to
move around while editing are very similar to those of Emacs.
- ^A or <Home> bol move to the start of the line
- ^B or <Left> backward-char move back one char
- Esc B backward-word move back one word
- ^D or <Delete> delete-char delete the char under the cursor
- ^E or <End> eol move to the end of the line
- ^F or <Right> forward-char move forward one char
- Esc F forward-word move forward one word
- <Tab> complete complete filename or alias
- ^T complete-query complete address with query
- ^K kill-eol delete to the end of the line
- ESC d kill-eow delete to the end of the word
- ^W kill-word kill the word in front of the cursor
- ^U kill-line delete entire line
- ^V quote-char quote the next typed key
- <Up> history-up recall previous string from history
- <Down> history-down recall next string from history
- <BackSpace> backspace kill the char in front of the cursor
- Esc u upcase-word convert word to upper case
- Esc l downcase-word convert word to lower case
- Esc c capitalize-word capitalize the word
- ^G n/a abort
- <Return> n/a finish editing
+ Table 2.2. Built-In Editor Functions
+
+ +------------------------------------------------------------------------+
+ | Key | Function | Description |
+ |----------------+-----------------+-------------------------------------|
+ | ^A or <Home> | bol | move to the start of the line |
+ |----------------+-----------------+-------------------------------------|
+ | ^B or <Left> | backward-char | move back one char |
+ |----------------+-----------------+-------------------------------------|
+ | Esc B | backward-word | move back one word |
+ |----------------+-----------------+-------------------------------------|
+ | ^D or <Delete> | delete-char | delete the char under the cursor |
+ |----------------+-----------------+-------------------------------------|
+ | ^E or <End> | eol | move to the end of the line |
+ |----------------+-----------------+-------------------------------------|
+ | ^F or <Right> | forward-char | move forward one char |
+ |----------------+-----------------+-------------------------------------|
+ | Esc F | forward-word | move forward one word |
+ |----------------+-----------------+-------------------------------------|
+ | <Tab> | complete | complete filename or alias |
+ |----------------+-----------------+-------------------------------------|
+ | ^T | complete-query | complete address with query |
+ |----------------+-----------------+-------------------------------------|
+ | ^K | kill-eol | delete to the end of the line |
+ |----------------+-----------------+-------------------------------------|
+ | ESC d | kill-eow | delete to the end of the word |
+ |----------------+-----------------+-------------------------------------|
+ | ^W | kill-word | kill the word in front of the |
+ | | | cursor |
+ |----------------+-----------------+-------------------------------------|
+ | ^U | kill-line | delete entire line |
+ |----------------+-----------------+-------------------------------------|
+ | ^V | quote-char | quote the next typed key |
+ |----------------+-----------------+-------------------------------------|
+ | <Up> | history-up | recall previous string from history |
+ |----------------+-----------------+-------------------------------------|
+ | <Down> | history-down | recall next string from history |
+ |----------------+-----------------+-------------------------------------|
+ | <BackSpace> | backspace | kill the char in front of the |
+ | | | cursor |
+ |----------------+-----------------+-------------------------------------|
+ | Esc u | upcase-word | convert word to upper case |
+ |----------------+-----------------+-------------------------------------|
+ | Esc l | downcase-word | convert word to lower case |
+ |----------------+-----------------+-------------------------------------|
+ | Esc c | capitalize-word | capitalize the word |
+ |----------------+-----------------+-------------------------------------|
+ | ^G | n/a | abort |
+ |----------------+-----------------+-------------------------------------|
+ | <Return> | n/a | finish editing |
+ +------------------------------------------------------------------------+
You can remap the editor functions using the bind command. For example, to
make the Delete key delete the character in front of the cursor rather
5. Reading Mail - The Index and Pager
- Similar to many other mail clients, there are two modes in which mail is
- read in Mutt-ng. The first is the index of messages in the mailbox, which
- is called the ``index'' in Mutt-ng. The second mode is the display of the
- message contents. This is called the ``pager.''
+ Similar to many other mail clients, there are two modes in which mail
+ isread in Mutt-ng. The first is the index of messages in the mailbox,
+ which is called the ``index'' in Mutt-ng. The second mode is the display
+ of the message contents. This is called the ``pager.''
The next few sections describe the functions provided in each of these
modes.
5.1. The Message Index
- c change to a different mailbox
- ESC c change to a folder in read-only mode
- C copy the current message to another mailbox
- ESC C decode a message and copy it to a folder
- ESC s decode a message and save it to a folder
- D delete messages matching a pattern
- d delete the current message
- F mark as important
- l show messages matching a pattern
- N mark message as new
- o change the current sort method
- O reverse sort the mailbox
- q save changes and exit
- s save-message
- T tag messages matching a pattern
- t toggle the tag on a message
- ESC t toggle tag on entire message thread
- U undelete messages matching a pattern
- u undelete-message
- v view-attachments
- x abort changes and exit
- <Return> display-message
- <Tab> jump to the next new message
- @ show the author's full e-mail address
- $ save changes to mailbox
- / search
- ESC / search-reverse
- ^L clear and redraw the screen
- ^T untag messages matching a pattern
+ Table 2.3. Default Index Menu Bindings
+
+ +-------------------------------------------------------------------+
+ | Key | Function | Description |
+ |----------+----------+---------------------------------------------|
+ | c | | change to a different mailbox |
+ |----------+----------+---------------------------------------------|
+ | ESC c | | change to a folder in read-only mode |
+ |----------+----------+---------------------------------------------|
+ | C | | copy the current message to another mailbox |
+ |----------+----------+---------------------------------------------|
+ | ESC C | | decode a message and copy it to a folder |
+ |----------+----------+---------------------------------------------|
+ | ESC s | | decode a message and save it to a folder |
+ |----------+----------+---------------------------------------------|
+ | D | | delete messages matching a pattern |
+ |----------+----------+---------------------------------------------|
+ | d | | delete the current message |
+ |----------+----------+---------------------------------------------|
+ | F | | mark as important |
+ |----------+----------+---------------------------------------------|
+ | l | | show messages matching a pattern |
+ |----------+----------+---------------------------------------------|
+ | N | | mark message as new |
+ |----------+----------+---------------------------------------------|
+ | o | | change the current sort method |
+ |----------+----------+---------------------------------------------|
+ | O | | reverse sort the mailbox |
+ |----------+----------+---------------------------------------------|
+ | q | | save changes and exit |
+ |----------+----------+---------------------------------------------|
+ | s | | save-message |
+ |----------+----------+---------------------------------------------|
+ | T | | tag messages matching a pattern |
+ |----------+----------+---------------------------------------------|
+ | t | | toggle the tag on a message |
+ |----------+----------+---------------------------------------------|
+ | ESC t | | toggle tag on entire message thread |
+ |----------+----------+---------------------------------------------|
+ | U | | undelete messages matching a pattern |
+ |----------+----------+---------------------------------------------|
+ | u | | undelete-message |
+ |----------+----------+---------------------------------------------|
+ | v | | view-attachments |
+ |----------+----------+---------------------------------------------|
+ | x | | abort changes and exit |
+ |----------+----------+---------------------------------------------|
+ | <Return> | | display-message |
+ |----------+----------+---------------------------------------------|
+ | <Tab> | | jump to the next new or unread message |
+ |----------+----------+---------------------------------------------|
+ | @ | | show the author's full e-mail address |
+ |----------+----------+---------------------------------------------|
+ | $ | | save changes to mailbox |
+ |----------+----------+---------------------------------------------|
+ | / | | search |
+ |----------+----------+---------------------------------------------|
+ | ESC / | | search-reverse |
+ |----------+----------+---------------------------------------------|
+ | ^L | | clear and redraw the screen |
+ |----------+----------+---------------------------------------------|
+ | ^T | | untag messages matching a pattern |
+ +-------------------------------------------------------------------+
5.1.1. Status Flags
messages. The pager is very similar to the Unix program less though not
nearly as featureful.
- <Return> go down one line
- <Space> display the next page (or next message if at the end of a message)
- - go back to the previous page
- n search for next match
- S skip beyond quoted text
- T toggle display of quoted text
- ? show key bindings
- / search for a regular expression (pattern)
- ESC / search backwards for a regular expression
- \ toggle search pattern coloring
- ^ jump to the top of the message
+ Table 2.4. Default Pager Menu Bindings
+
+ +------------------------------------------------------------------------+
+ | Key | Function | Description |
+ |----------+----------+--------------------------------------------------|
+ | <Return> | | go down one line |
+ |----------+----------+--------------------------------------------------|
+ | <Space> | | display the next page (or next message if at the |
+ | | | end of a message) |
+ |----------+----------+--------------------------------------------------|
+ | - | | go back to the previous page |
+ |----------+----------+--------------------------------------------------|
+ | n | | search for next match |
+ |----------+----------+--------------------------------------------------|
+ | S | | skip beyond quoted text |
+ |----------+----------+--------------------------------------------------|
+ | T | | toggle display of quoted text |
+ |----------+----------+--------------------------------------------------|
+ | ? | | show key bindings |
+ |----------+----------+--------------------------------------------------|
+ | / | | search for a regular expression (pattern) |
+ |----------+----------+--------------------------------------------------|
+ | ESC / | | search backwards for a regular expression |
+ |----------+----------+--------------------------------------------------|
+ | \ | | toggle search pattern coloring |
+ |----------+----------+--------------------------------------------------|
+ | ^ | | jump to the top of the message |
+ +------------------------------------------------------------------------+
In addition, many of the functions from the index are available in the
pager, such as delete-message or copy-message (this is one advantage over
using an external pager to view messages).
Also, the internal pager supports a couple other advanced features. For
- one, it will accept and translate the ``standard'' nroff sequences for
- bold and underline. These sequences are a series of either the letter,
+ one, it will accept and translate the ``standard'' nroff sequences forbold
+ and underline. These sequences are a series of either the letter,
backspace (^H), the letter again for bold or the letter, backspace, ``_''
for denoting underline. Mutt-ng will attempt to display these in bold and
underline respectively if your terminal supports them. If not, you can use
Additionally, the internal pager supports the ANSI escape sequences for
character attributes. Mutt-ng translates them into the correct color and
- character settings. The sequences Mutt-ng supports are:
-
- ESC [ Ps;Ps;Ps;...;Ps m
- where Ps =
- 0 All Attributes Off
- 1 Bold on
- 4 Underline on
- 5 Blink on
- 7 Reverse video on
- 3x Foreground color is x
- 4x Background color is x
-
- Colors are
- 0 black
- 1 red
- 2 green
- 3 yellow
- 4 blue
- 5 magenta
- 6 cyan
- 7 white
+ character settings. The sequences Mutt-ng supports are: ESC [
+ Ps;Ps;Ps;...;Ps m (see table below for possible values for Ps).
+
+ Table 2.5. ANSI Escape Sequences
+
+ +-------------------------------------------------+
+ | Value | Attribute |
+ |-------+-----------------------------------------|
+ | 0 | All Attributes Off |
+ |-------+-----------------------------------------|
+ | 1 | Bold on |
+ |-------+-----------------------------------------|
+ | 4 | Underline on |
+ |-------+-----------------------------------------|
+ | 5 | Blink on |
+ |-------+-----------------------------------------|
+ | 7 | Reverse video on |
+ |-------+-----------------------------------------|
+ | 3x | Foreground color is x (see table below) |
+ |-------+-----------------------------------------|
+ | 4x | Background color is x (see table below) |
+ +-------------------------------------------------+
+
+ Table 2.6. ANSI Colors
+
+ +------------------+
+ | Number | Color |
+ |--------+---------|
+ | 0 | black |
+ |--------+---------|
+ | 1 | red |
+ |--------+---------|
+ | 2 | green |
+ |--------+---------|
+ | 3 | yellow |
+ |--------+---------|
+ | 4 | blue |
+ |--------+---------|
+ | 5 | magenta |
+ |--------+---------|
+ | 6 | cyan |
+ |--------+---------|
+ | 7 | white |
+ +------------------+
Mutt-ng uses these attributes for handling text/enriched messages, and
they can also be used by an external autoview script for highlighting
5.3. Threaded Mode
- When the mailbox is sorted by threads, there are a few additional
+ When the mailbox is sorted by threads ,there are a few additional
functions available in the index and pager modes.
- ^D delete-thread delete all messages in the current thread
- ^U undelete-thread undelete all messages in the current thread
- ^N next-thread jump to the start of the next thread
- ^P previous-thread jump to the start of the previous thread
- ^R read-thread mark the current thread as read
- ESC d delete-subthread delete all messages in the current subthread
- ESC u undelete-subthread undelete all messages in the current subthread
- ESC n next-subthread jump to the start of the next subthread
- ESC p previous-subthread jump to the start of the previous subthread
- ESC r read-subthread mark the current subthread as read
- ESC t tag-thread toggle the tag on the current thread
- ESC v collapse-thread toggle collapse for the current thread
- ESC V collapse-all toggle collapse for all threads
- P parent-message jump to parent message in thread
+ Table 2.7. Default Thread Function Bindings
+
+ +------------------------------------------------------------------------+
+ | Key | Function | Description |
+ |-------+--------------------+-------------------------------------------|
+ | ^D | delete-thread | delete all messages in the current thread |
+ |-------+--------------------+-------------------------------------------|
+ | ^U | undelete-thread | undelete all messages in the current |
+ | | | thread |
+ |-------+--------------------+-------------------------------------------|
+ | ^N | next-thread | jump to the start of the next thread |
+ |-------+--------------------+-------------------------------------------|
+ | ^P | previous-thread | jump to the start of the previous thread |
+ |-------+--------------------+-------------------------------------------|
+ | ^R | read-thread | mark the current thread as read |
+ |-------+--------------------+-------------------------------------------|
+ | ESC d | delete-subthread | delete all messages in the current |
+ | | | subthread |
+ |-------+--------------------+-------------------------------------------|
+ | ESC u | undelete-subthread | undelete all messages in the current |
+ | | | subthread |
+ |-------+--------------------+-------------------------------------------|
+ | ESC n | next-subthread | jump to the start of the next subthread |
+ |-------+--------------------+-------------------------------------------|
+ | ESC p | previous-subthread | jump to the start of the previous |
+ | | | subthread |
+ |-------+--------------------+-------------------------------------------|
+ | ESC r | read-subthread | mark the current subthread as read |
+ |-------+--------------------+-------------------------------------------|
+ | ESC t | tag-thread | toggle the tag on the current thread |
+ |-------+--------------------+-------------------------------------------|
+ | ESC v | collapse-thread | toggle collapse for the current thread |
+ |-------+--------------------+-------------------------------------------|
+ | ESC V | collapse-all | toggle collapse for all threads |
+ |-------+--------------------+-------------------------------------------|
+ | P | parent-message | jump to parent message in thread |
+ +------------------------------------------------------------------------+
Note: Collapsing a thread displays only the first message in the thread
and hides the others. This is useful when threads contain so many messages
- that you can only see a handful of threads on the screen. See %M in
- index-format. For example, you could use "%?M?(#%03M)&(%4l)?" in
+ that you can only see a handful of threads onthe screen. See %M in
+ index-format . For example, you could use "%?M?(#%03M)&(%4l)?" in
index-format to optionally display the number of hidden messages if the
thread is collapsed.
attachment's content type. These changes are not persistent, and get lost
upon changing folders.
- Note that this command is also available on the compose-menu. There, it's
+ Note that this command is also available on the compose-menu .There, it's
used to fine-tune the properties of attachments you are going to send.
enter-command (default: ``:'')
pipe-message (default: |)
Asks for an external Unix command and pipes the current or tagged
- message(s) to it. The variables pipe-decode, pipe-split, pipe-sep and
+ message(s) to it. The variables pipe-decode ,pipe-split, pipe-sep and
wait-key control the exact behavior of this function.
resend-message (default: ESC e)
toggle-quoted (default: T)
The pager uses the quote-regexp variable to detect quoted text when
- displaying the body of the message. This function toggles the display of
+ displaying the body of the message. This function toggles the displayof
the quoted material in the message. It is particularly useful when are
interested in just the response and there is a large amount of quoted text
in the way.
The following bindings are available in the index for sending messages.
- m compose compose a new message
- r reply reply to sender
- g group-reply reply to all recipients
- L list-reply reply to mailing list address
- f forward forward message
- b bounce bounce (remail) message
- ESC k mail-key mail a PGP public key to someone
+ Table 2.8. Default Mail Composition Bindings
+
+ +--------------------------------------------------------+
+ | Key | Function | Description |
+ |-------+-------------+----------------------------------|
+ | m | compose | compose a new message |
+ |-------+-------------+----------------------------------|
+ | r | reply | reply to sender |
+ |-------+-------------+----------------------------------|
+ | g | group-reply | reply to all recipients |
+ |-------+-------------+----------------------------------|
+ | L | list-reply | reply to mailing list address |
+ |-------+-------------+----------------------------------|
+ | f | forward | forward message |
+ |-------+-------------+----------------------------------|
+ | b | bounce | bounce (remail) message |
+ |-------+-------------+----------------------------------|
+ | ESC k | mail-key | mail a PGP public key to someone |
+ +--------------------------------------------------------+
Bouncing a message sends the message as is to the recipient you specify.
Forwarding a message allows you to add comments or modify the message you
are forwarding. These items are discussed in greater detail in the next
- chapter forwarding-mail.
+ chapter forwarding-mail .
6.1. Composing new messages
Once you have finished editing the body of your mail message, you are
returned to the compose menu. The following options are available:
- a attach-file attach a file
- A attach-message attach message(s) to the message
- ESC k attach-key attach a PGP public key
- d edit-description edit description on attachment
- D detach-file detach a file
- t edit-to edit the To field
- ESC f edit-from edit the From field
- r edit-reply-to edit the Reply-To field
- c edit-cc edit the Cc field
- b edit-bcc edit the Bcc field
- y send-message send the message
- s edit-subject edit the Subject
- S smime-menu select S/MIME options
- f edit-fcc specify an ``Fcc'' mailbox
- p pgp-menu select PGP options
- P postpone-message postpone this message until later
- q quit quit (abort) sending the message
- w write-fcc write the message to a folder
- i ispell check spelling (if available on your system)
- ^F forget-passphrase wipe passphrase(s) from memory
+ Table 2.9. Default Compose Menu Bindings
+
+ +------------------------------------------------------------------------+
+ | Key | Function | Description |
+ |-------+-------------------+--------------------------------------------|
+ | a | attach-file | attach a file |
+ |-------+-------------------+--------------------------------------------|
+ | A | attach-message | attach message(s) to the message |
+ |-------+-------------------+--------------------------------------------|
+ | ESC k | attach-key | attach a PGP public key |
+ |-------+-------------------+--------------------------------------------|
+ | d | edit-description | edit description on attachment |
+ |-------+-------------------+--------------------------------------------|
+ | D | detach-file | detach a file |
+ |-------+-------------------+--------------------------------------------|
+ | t | edit-to | edit the To field |
+ |-------+-------------------+--------------------------------------------|
+ | ESC f | edit-from | edit the From field |
+ |-------+-------------------+--------------------------------------------|
+ | r | edit-reply-to | edit the Reply-To field |
+ |-------+-------------------+--------------------------------------------|
+ | c | edit-cc | edit the Cc field |
+ |-------+-------------------+--------------------------------------------|
+ | b | edit-bcc | edit the Bcc field |
+ |-------+-------------------+--------------------------------------------|
+ | y | send-message | send the message |
+ |-------+-------------------+--------------------------------------------|
+ | s | edit-subject | edit the Subject |
+ |-------+-------------------+--------------------------------------------|
+ | S | smime-menu | select S/MIME options |
+ |-------+-------------------+--------------------------------------------|
+ | f | edit-fcc | specify an ``Fcc'' mailbox |
+ |-------+-------------------+--------------------------------------------|
+ | p | pgp-menu | select PGP options |
+ |-------+-------------------+--------------------------------------------|
+ | P | postpone-message | postpone this message until later |
+ |-------+-------------------+--------------------------------------------|
+ | q | quit | quit (abort) sending the message |
+ |-------+-------------------+--------------------------------------------|
+ | w | write-fcc | write the message to a folder |
+ |-------+-------------------+--------------------------------------------|
+ | i | ispell | check spelling (if available on your |
+ | | | system) |
+ |-------+-------------------+--------------------------------------------|
+ | ^F | forget-passphrase | wipe passphrase(s) from memory |
+ +------------------------------------------------------------------------+
Note: The attach-message function will prompt you for a folder to attach
- messages from. You can now tag messages in that folder and they will be
- attached to the message you are sending. Note that certain operations like
+ messages from. You can now tag messages in that folder and theywill be
+ attached to the message you are sending. Note that certainoperations like
composing a new mail, replying, forwarding, etc. are not permitted when
you are in that folder. The %r in status-format will change to a 'A' to
indicate that you are in attach-message mode.
> production server that we want to set up before our customer's
> project will go live.
-
You can start editing the email message. It is strongly recommended to put
your answer below the quoted text and to only quote what is really
necessary and that you refer to. Putting your answer on top of the quoted
set attribution = "On %d, %n wrote:"
-
It can also be set to something more compact, e.g.
set attribution = "attribution="* %n <%a> [%(%y-%m-%d %H:%M)]:"
-
The example above results in the following attribution:
* Michael Svensson <svensson@foobar.com> [05-03-06 17:02]:
> production server that we want to set up before our customer's
> project will go live.
-
Generally, try to keep your attribution short yet information-rich. It is
not the right place for witty quotes, long "attribution" novels or
anything like that: the right place for such things is - if at all - the
In the situation where a group of people uses email as a discussion, most
of the emails will have one or more recipients, and probably several "Cc:"
- recipients. The group reply functionality ensures that when you press g
+ recipients. The group reply functionalityensures that when you press g
instead of r to do a reply, each and every recipient that is contained in
the original message will receive a copy of the message, either as normal
recipient or as "Cc:" recipient.
lists linuxevent@luga\.at vuln-dev@ mutt-ng-users@
-
Nowadays, most mailing list software like GNU Mailman adds a
Mail-Followup-To: header to their emails anyway, so setting lists is
hardly ever necessary in practice.
encrypted using the selected public keys, and sent out.
Most fields of the entries in the key selection menu (see also
- pgp-entry-format) have obvious meanings. But some explanations on the
+ pgp-entry-format ) have obvious meanings. But some explanations on the
capabilities, flags, and validity fields are in order.
The flags sequence (%f) will expand to one of the following flags:
- R The key has been revoked and can't be used.
- X The key is expired and can't be used.
- d You have marked the key as disabled.
- c There are unknown critical self-signature
- packets.
-
- The capabilities field (%c) expands to a two-character sequence
- representing a key's capabilities. The first character gives the key's
- encryption capabilities: A minus sign (-) means that the key cannot be
- used for encryption. A dot (.) means that it's marked as a signature key
- in one of the user IDs, but may also be used for encryption. The letter e
- indicates that this key can be used for encryption.
+ Table 2.10. PGP Key Menu Flags
+
+ +-----------------------------------------------------------+
+ | Flag | Description |
+ |------+----------------------------------------------------|
+ | R | The key has been revoked and can't be used. |
+ |------+----------------------------------------------------|
+ | X | The key is expired and can't be used. |
+ |------+----------------------------------------------------|
+ | d | You have marked the key as disabled. |
+ |------+----------------------------------------------------|
+ | c | There are unknown critical self-signature packets. |
+ +-----------------------------------------------------------+
+
+ The capabilities field (%c) expands to a two-character
+ sequencerepresenting a key's capabilities. The first character gives the
+ key's encryption capabilities: A minus sign (- )means that the key cannot
+ be used for encryption. A dot (. )means that it's marked as a signature
+ key in one of the user IDs, but may also be used for encryption. The
+ letter e indicates that this key can be used for encryption.
The second character indicates the key's signing capabilities. Once again,
a ``-'' implies ``not for signing'', ``.'' implies that the key is marked
Finally, the validity field (%t) indicates how well-certified a user-id
is. A question mark (?) indicates undefined validity, a minus character
(-) marks an untrusted association, a space character means a partially
- trusted association, and a plus character (+) indicates complete validity.
+ trusted association, and a plus character (+ ) indicates complete
+ validity.
6.5. Sending anonymous messages via mixmaster
functions, which are by default bound to the left and right arrows and to
the h and l keys (think vi keyboard bindings). To insert a remailer at the
current chain position, use the insert function. To append a remailer
- behind the current chain position, use select-entry or append. You can
+ behind the current chain position, use select-entry or append . You can
also delete entries from the chain, using the corresponding function.
Finally, to abandon your changes, leave the menu, or accept them pressing
(by default) the Return key.
Pay me EUR 50,000.- cash or your favorite stuffed animal will die
a horrible death.
-
----- End forwarded message -----
When you're done with editing the mail, save and quit the editor, and you
own tastes. When Mutt-ng is first invoked, it will attempt to read the
``system'' configuration file (defaults set by your local system
administrator), unless the ``-n'' commandline option is specified. This
- file is typically /usr/local/share/muttng/Muttngrc or /etc/Muttngrc,
+ file is typically /usr/local/share/muttng/Muttngrc or /etc/Muttngrc ,
Mutt-ng users will find this file in /usr/local/share/muttng/Muttrc or
/etc/Muttngrc. Mutt will next look for a file named .muttrc in your home
directory, Mutt-ng will look for .muttngrc. If this file does not exist
- and your home directory has a subdirectory named .mutt, mutt try to load a
- file named .muttng/muttngrc.
+ and your home directory has a subdirectory named .mutt , mutt try to load
+ a file named .muttng/muttngrc.
.muttrc (or .muttngrc for Mutt-ng) is the file where you will usually
place your commands to configure Mutt-ng.
2. Basic Syntax of Initialization Files
- An initialization file consists of a series of commands. Each line of the
+ An initialization file consists of a series of commands .Each line of the
file may contain one or more commands. When multiple commands are used,
they must be separated by a semicolon (;).
split over multiple lines with only one ``#''.
# folder-hook . \
- set realname="Michael \"MuttDude\" Elkins"
+ set realname="Michael \"MuttDude\" Elkins"
When testing your config files, beware the following caveat. The backslash
at the end of the commented line extends the current line with the next
macro generic <F1> "!less -r /path/to/manual" "Show manual"
macro pager <F1> "!less -r /path/to/manual" "Show manual"
- for generic, pager and index. The alternative is to define a custom
+ for generic, pager and index .The alternative is to define a custom
variable like so:
set user_manualcmd = "!less -r /path/to_manual"
4. Defining/Using aliases
- Usage: alias key address [ , address, ... ]
+ Usage: alias key address[ , address, ... ]
+
It's usually very cumbersome to remember or type out the address of
someone you are communicating with. Mutt-ng allows you to create
Unlike other mailers, Mutt-ng doesn't require aliases to be defined in a
special file. The alias command can appear anywhere in a configuration
- file, as long as this file is source. Consequently, you can have multiple
+ file, as long as this file is source .Consequently, you can have multiple
alias files, or you can have all aliases defined in your muttrc.
On the other hand, the create-alias function can use only one file, the
source ~/.mail_aliases
set alias_file=~/.mail_aliases
- To use aliases, you merely use the alias at any place in mutt where mutt
- prompts for addresses, such as the To: or Cc: prompt. You can also enter
- aliases in your editor at the appropriate headers if you have the
+ To use aliases, you merely use the alias at any place in mutt where
+ muttprompts for addresses, such as the To: or Cc: prompt. You can also
+ enter aliases in your editor at the appropriate headers if you have the
edit-headers variable set.
In addition, at the various address prompts, you can use the tab character
Usage: bind map key function
+
This command allows you to change the default key bindings (operation
invoked when pressing a key).
map specifies in which menu the binding belongs. Multiple maps may be
- specified by separating them with commas (no additional whitespace is
- allowed). The currently defined maps are:
+ specified by separating them with commas (no additional whitespace
+ isallowed). The currently defined maps are:
generic
In addition, key may consist of:
- \t tab
- <tab> tab
- <backtab> backtab / shift-tab
- \r carriage return
- \n newline
- \e escape
- <esc> escape
- <up> up arrow
- <down> down arrow
- <left> left arrow
- <right> right arrow
- <pageup> Page Up
- <pagedown> Page Down
- <backspace> Backspace
- <delete> Delete
- <insert> Insert
- <enter> Enter
- <return> Return
- <home> Home
- <end> End
- <space> Space bar
- <f1> function key 1
- <f10> function key 10
+ Table 3.1. Alternative Key Names
+
+ +-----------------------------------+
+ | Sequence | Description |
+ |-------------+---------------------|
+ | \t | tab |
+ |-------------+---------------------|
+ | <tab> | tab |
+ |-------------+---------------------|
+ | <backtab> | backtab / shift-tab |
+ |-------------+---------------------|
+ | \r | carriage return |
+ |-------------+---------------------|
+ | \n | newline |
+ |-------------+---------------------|
+ | \e | escape |
+ |-------------+---------------------|
+ | <esc> | escape |
+ |-------------+---------------------|
+ | <up> | up arrow |
+ |-------------+---------------------|
+ | <down> | down arrow |
+ |-------------+---------------------|
+ | <left> | left arrow |
+ |-------------+---------------------|
+ | <right> | right arrow |
+ |-------------+---------------------|
+ | <pageup> | Page Up |
+ |-------------+---------------------|
+ | <pagedown> | Page Down |
+ |-------------+---------------------|
+ | <backspace> | Backspace |
+ |-------------+---------------------|
+ | <delete> | Delete |
+ |-------------+---------------------|
+ | <insert> | Insert |
+ |-------------+---------------------|
+ | <enter> | Enter |
+ |-------------+---------------------|
+ | <return> | Return |
+ |-------------+---------------------|
+ | <home> | Home |
+ |-------------+---------------------|
+ | <end> | End |
+ |-------------+---------------------|
+ | <space> | Space bar |
+ |-------------+---------------------|
+ | <f1> | function key 1 |
+ |-------------+---------------------|
+ | <f10> | function key 10 |
+ +-----------------------------------+
key does not need to be enclosed in quotes unless it contains a space (``
'').
function specifies which action to take when key is pressed. For a
- complete list of functions, see the functions. The special function noop
+ complete list of functions, see the functions .The special function noop
unbinds the specified key sequence.
6. Defining aliases for character sets
- Usage: charset-hook alias charset Usage: iconv-hook charset local-charset
+ Usage: charset-hook alias charset
+ Usage: iconv-hook charset local-charset
+
The charset-hook command defines an alias for a character set. This is
useful to properly display messages which are tagged with a character set
Usage: folder-hook [!]regexp command
+
It is often desirable to change settings based on which mailbox you are
reading. The folder-hook command provides a method by which you can
execute any configuration command. regexp is a regular expression
distinguish it from the logical not operator for the expression.
Note that the settings are not restored when you leave the mailbox. For
- example, a command action to perform is to change the sorting method based
+ example, a command action to perform is to change the sorting methodbased
upon the mailbox being read:
folder-hook mutt set sort=threads
8. Keyboard macros
- Usage: macro menu key sequence [ description ]
+ Usage: macro menu key sequence [ description ]
+
Macros are useful when you would like a single key to perform a series of
- actions. When you press key in menu menu, Mutt-ng will behave as if you
+ actions. When you press key in menu menu ,Mutt-ng will behave as if you
had typed sequence. So if you have a common sequence of commands you type,
- you can create a macro to execute those commands with a single key.
+ you can create a macro to execute those commands with a singlekey.
menu is the maps which the macro will be bound. Multiple maps may be
specified by separating multiple menu arguments by commas. Whitespace may
- not be used in between the menu arguments and the commas separating them.
+ not be used in between the menu arguments and thecommas separating them.
key and sequence are expanded by the same rules as the bind. There are
some additions however. The first is that control characters in sequence
can also be specified as ^x. In order to get a caret (`^'') you need to
use ^^. Secondly, to specify a certain key such as up or to invoke a
- function directly, you can use the format <key name> and <function name>.
- For a listing of key names see the section on bind. Functions are listed
+ function directly, you can use the format <key name> and <function name>
+ .For a listing of key names see the section on bind. Functions are listed
in the functions.
- The advantage with using function names directly is that the macros will
- work regardless of the current key bindings, so they are not dependent on
- the user having particular key definitions. This makes them more robust
- and portable, and also facilitates defining of macros in files used by
- more than one user (eg. the system Muttngrc).
+ The advantage with using function names directly is that the macros
+ willwork regardless of the current key bindings, so they are not dependent
+ on the user having particular key definitions. This makes them more
+ robustand portable, and also facilitates defining of macros in files used
+ by more than one user (eg. the system Muttngrc).
Optionally you can specify a descriptive text after sequence, which is
shown in the help screens.
9. Using color and mono video attributes
- Usage: color object foreground background [ regexp ] Usage: color index
- foreground background pattern Usage: uncolor index pattern [ pattern ... ]
+ Usage: color object foregroundbackground [ regexp]
+ Usage: color index foreground backgroundpattern
+ Usage: uncolor index pattern[ pattern ... ]
+
If your terminal supports color, you can spice up Mutt-ng by creating your
own color scheme. To define the color of an object (type of information),
in the color command for it to be removed. The pattern ``*'' is a special
token which means to clear the color index list of all entries.
- Mutt-ng also recognizes the keywords color0, color1, …, colorN-1 (N
+ Mutt-ng also recognizes the keywords color0, color1 ,…, colorN-1 (N
being the number of colors supported by your terminal). This is useful
when you remap the colors for your display (for example by changing the
color associated with color2 for your xterm), since color names may then
If your terminal does not support color, it is still possible change the
video attributes through the use of the ``mono'' command:
- Usage: mono <object> <attribute> [ regexp ] Usage: mono index attribute
- pattern Usage: unmono index pattern [ pattern ... ]
+ Usage: mono <object> <attribute>[ regexp ]
+ Usage: mono index attribute pattern
+ Usage: unmono index pattern[ pattern ... ]
where attribute is one of the following:
10. Ignoring (weeding) unwanted message headers
- Usage: [un]ignore pattern [ pattern ... ]
+ Usage: [un]ignore pattern [ pattern... ]
+
Messages often have many header fields added by automatic processing
systems, or which may not seem useful to display on the screen. This
instance, when replying to a message that you sent to a different party,
mutt will automatically suggest to send the response to the original
message's recipients -- responding to yourself won't make much sense in
- many cases. (See reply-to.)
+ many cases. (See reply-to .)
Many users receive e-mail under a number of different addresses. To fully
use mutt's features here, the program must be able to recognize what
pattern under an unalternates command.
To remove a regular expression from the alternates list, use the
- unalternates command with exactly the same regexp. Likewise, if the regexp
- for a alternates command matches an entry on the unalternates list, that
- unalternates entry will be removed. If the regexp for unalternates is
+ unalternates command with exactly the same regexp . Likewise, if the
+ regexp for a alternates command matches an entry on the unalternates list,
+ that unalternates entry will be removed. If the regexp for unalternates is
``*'', all entries on alternates will be removed.
12. Format = Flowed
fit on your terminal. If you want a fixed margin on the right side of your
terminal, you can set the following:
- set wrapmargin = 10
-
+ set wrapmargin = 10
The code above makes the line break 10 columns before the right side of
the terminal.
If your terminal is so wide that the lines are embarrassingly long, you
can also set a maximum line length:
- set max_line_length = 120
-
+ set max_line_length = 120
The example above will give you lines not longer than 120 characters.
When you view at format=flowed messages, you will often see the quoting
hierarchy like in the following example:
- >Bill, can you please send last month's progress report to Mr.
- >Morgan? We also urgently need the cost estimation for the new
- >production server that we want to set up before our customer's
- >project will go live.
-
+ >Bill, can you please send last month's progress report to Mr.
+ >Morgan? We also urgently need the cost estimation for the new
+ >production server that we want to set up before our customer's
+ >project will go live.
This obviously doesn't look very nice, and it makes it very hard to
differentiate between text and quoting character. The solution is to
configure mutt-ng to "stuff" the quoting:
- set stuff_quoted
-
+ set stuff_quoted
This will lead to a nicer result that is easier to read:
- > Bill, can you please send last month's progress report to Mr.
- > Morgan? We also urgently need the cost estimation for the new
- > production server that we want to set up before our customer's
- > project will go live.
-
+ > Bill, can you please send last month's progress report to Mr.
+ > Morgan? We also urgently need the cost estimation for the new
+ > production server that we want to set up before our customer's
+ > project will go live.
12.3. Sending
If you want mutt-ng to send emails with format=flowed set, you need to
explicitly set it:
- set text_flowed
-
+ set text_flowed
Additionally, you have to use an editor which supports writing
format=flowed-conforming emails. For vim, this is done by adding w to the
13. Mailing lists
- Usage: [un]lists regexp [ regexp ... ] Usage: [un]subscribe regexp [
- regexp ... ]
+ Usage: [un]lists regexp [ regexp... ]
+ Usage: [un]subscribe regexp [ regexp... ]
+
- Mutt-ng has a few nice features for using-lists. In order to take
+ Mutt-ng has a few nice features for using-lists .In order to take
advantage of them, you must specify which addresses belong to mailing
lists, and which mailing lists you are subscribed to. Once you have done
this, the list-reply function will work for all known lists. Additionally,
Usage: mbox-hook [!]pattern mailbox
- This command is used to move read messages from a specified mailbox to a
- different mailbox automatically when you quit or change folders. pattern
+
+ This command is used to move read messages from a specified mailbox to
+ adifferent mailbox automatically when you quit or change folders. pattern
is a regular expression specifying the mailbox to treat as a ``spool''
mailbox and mailbox specifies where mail should be saved when read.
15. Defining mailboxes which receive mail
- Usage: [un]mailboxes [!]filename [ filename ... ]
+ Usage: [un]mailboxes [!]filename[ filename ... ]
+
This command specifies folders which can receive mail and which will be
checked for new messages. By default, the main menu status bar displays
16. User defined headers
- Usage: my_hdr string unmy_hdr field [ field ... ]
+ Usage: my_hdr string
+ Usage: unmy_hdr field [ field... ]
+
The ``my_hdr'' command allows you to create your own header fields which
will be added to every message you send.
17. Defining the order of headers when viewing messages
- Usage: hdr_order header1 header2 header3
+ Usage: hdr_order header1header2 header3
+
With this command, you can specify an order in which mutt will attempt to
present headers to you when viewing messages.
Usage: save-hook [!]pattern filename
+
This command is used to override the default filename used when saving
messages. filename will be used as the default filename if the message is
From: an address matching regexp or if you are the author and the message
- is addressed to: something matching regexp.
+ is addressed to: something matching regexp .
See pattern-hook for information on the exact format of pattern.
Usage: fcc-hook [!]pattern mailbox
+
This command is used to save outgoing mail in a mailbox other than record.
Mutt-ng searches the initial list of message recipients for the first
matching regexp and uses mailbox as the default Fcc: mailbox. If no match
Usage: fcc-save-hook [!]pattern mailbox
+
This command is a shortcut, equivalent to doing both a fcc-hook and a
save-hook with its arguments.
21. Change settings based upon message recipients
- Usage: reply-hook [!]pattern command Usage: send-hook [!]pattern command
+ Usage: reply-hook [!]pattern command
+ Usage: send-hook [!]pattern command
Usage: send2-hook [!]pattern command
+
+ v
+
These commands can be used to execute arbitrary configuration commands
based upon recipients of the message. pattern is a regular expression
matching the desired address. command is executed when regexp matches
recipients of the message.
reply-hook is matched against the message you are replying to, instead of
- the message you are sending. send-hook is matched against all messages,
- both new and replies. Note: reply-hooks are matched before the send-hook,
- regardless of the order specified in the users's configuration file.
+ the message you are sending .send-hook is matched against all messages,
+ both new and replies .Note: reply-hooks are matched before the send-hook
+ ,regardless of the order specified in the users's configuration file.
send2-hook is matched every time a message is changed, either by editing
it, or by using the compose menu to change its recipients or subject.
- send2-hook is executed after send-hook, and can, e.g., be used to set
+ send2-hook is executed after send-hook ,and can, e.g., be used to set
parameters such as the sendmail variable depending on the message's sender
address.
Usage: message-hook [!]pattern command
+
This command can be used to execute arbitrary configuration commands
before viewing or formatting a message based upon information about the
message. command is executed if the pattern matches the message to be
Example:
message-hook ~A 'set pager=builtin'
- message-hook '~f freshmeat-news' 'set pager="less \"+/^ subject: .*\""'
+ message-hook '~f freshmeat-news' 'set pager="less \"+/^ subject:.*\""'
23. Choosing the cryptographic key of the recipient
Usage: crypt-hook pattern keyid
+
When encrypting messages with PGP or OpenSSL, you may want to associate a
certain key with a given e-mail address automatically, either because the
recipient's public key can't be deduced from the destination address, or
- because, for some reasons, you need to override the key Mutt-ng would
- normally use. The crypt-hook command provides a method by which you can
- specify the ID of the public key to be used when encrypting messages to a
- certain recipient.
+ because, for some reasons, you need to override the key Mutt-ng
+ wouldnormally use. The crypt-hook command provides a method by which you
+ can specify the ID of the public key to be used when encrypting messages
+ to a certain recipient.
The meaning of "key id" is to be taken broadly in this context: You can
either put a numerical key ID here, an e-mail address, or even just a real
Usage: push string
+
This command adds the named string to the keyboard buffer. The string may
contain control characters, key names and function names like the sequence
string in the macro command. You may use it to automatically run a
- sequence of commands at startup, or when entering certain folders.
+ sequence of commands at startup, or when entering certain folders. For
+ example, the following command will automatically collapse all threads
+ when entering a folder:
+
+ folder-hook . 'push <collapse-all>'
+
25. Executing functions
- Usage: exec function [ function ... ]
+ Usage: exec function [ function ... ]
+
This command can be used to execute any function. Functions are listed in
the functions. ``exec function'' is equivalent to ``push <function>''.
26. Message Scoring
- Usage: score pattern value Usage: unscore pattern [ pattern ... ]
+ Usage: score pattern value
+ Usage: unscore pattern [ pattern... ]
+
In situations where you have to cope with a lot of emails, e.g. when you
read many different mailing lists, and take part in discussions, it is
o delete threshold: when a message has a score value equal or lower than
the delete threshold, it will be marked as deleted.
- These three thresholds can be set via the variables score-threshold-flag,
- score-threshold-read, score-threshold-delete and. By default,
+ These three thresholds can be set via the variables score-threshold-flag
+ ,score-threshold-read, score-threshold-delete and. By default,
score-threshold-read and score-threshold-delete are set to -1, which means
that in the default threshold configuration no message will ever get
marked as read or deleted.
27. Spam detection
- Usage: spam pattern format Usage: nospam pattern
+ Usage: spam pattern format
+ Usage: nospam pattern
+
Mutt-ng has generalized support for external spam-scoring filters. By
defining your spam patterns with the spam and nospam commands, you can
If I then received a message that DCC registered with ``many'' hits under
the ``Fuz2'' checksum, and that PureMessage registered with a 97%
- probability of being spam, that message's spam tag would read
- 90+/DCC-Fuz2, 97/PM. (The four characters before ``=many'' in a DCC report
- indicate the checksum used -- in this case, ``Fuz2''.)
+ probability of being spam, that message's spam tag would read90+/DCC-Fuz2,
+ 97/PM. (The four characters before ``=many'' in a DCC report indicate the
+ checksum used -- in this case, ``Fuz2''.)
If the $spam_separator variable is unset, then each spam pattern match
supersedes the previous one. Instead of getting joined format strings,
no spam attributes at all -- that is, one that didn't match any of your
spam patterns -- is sorted at lowest priority. Numbers are sorted next,
beginning with 0 and ranging upward. Finally, non-numeric strings are
- sorted, with ``a'' taking lower priority than ``z''. Clearly, in general,
+ sorted, with ``a'' taking lowerpriority than ``z''. Clearly, in general,
sorting by spam tags is most effective when you can coerce your filter to
give you a raw number. But in case you can't, mutt can still do something
useful.
The nospam command can be used to write exceptions to spam patterns. If a
header pattern matches something in a spam command, but you nonetheless do
- not want it to receive a spam tag, you can list a more precise pattern
+ not want it to receive a spam tag, you can list amore precise pattern
under a nospam command.
If the pattern given to nospam is exactly the same as the pattern on an
spam command matches an entry on the nospam list, that nospam entry will
be removed. If the pattern for nospam is ``*'', all entries on both lists
will be removed. This might be the default action if you use spam and
- nospam in conjunction with a folder-hook.
+ nospam in conjunction with a folder-hook .
You can have as many spam or nospam commands as you like. You can even do
your own primitive spam detection within mutt -- for example, if you
28. Setting variables
- Usage: set [no|inv]variable[=value] [ variable ... ] Usage: toggle
- variable [variable ... ] Usage: unset variable [variable ... ] Usage:
- reset variable [variable ... ]
+ Usage: set [no|inv]variable[=value] [ variable ... ]
+ Usage: toggle variable [variable... ]
+ Usage: unset variable [variable... ]
+ Usage: reset variable [variable... ]
+
- This command is used to set (and unset) variables. There are four basic
+ This command is used to set (and unset) variables .There are four basic
types of variables: boolean, number, string and quadoption. boolean
variables can be set (true) or unset (false). number variables can be
assigned a positive integer value.
prompt with a default answer of ``yes'' and ask-no will provide a default
answer of ``no.''
- Prefixing a variable with ``no'' will unset it. Example: set noaskbcc.
+ Prefixing a variable with ``no'' will unset it. Example: set noaskbcc .
For boolean variables, you may optionally prefix the variable name with
inv to toggle the value (on or off). This is useful when writing macros.
29. Reading initialization commands from another file
- Usage: source filename [ filename ... ]
+ Usage: source filename [ filename... ]
+
This command allows the inclusion of initialization commands from other
files. For example, I place all of my aliases in ˜/.mail_aliases so that
30. Removing hooks
- Usage: unhook [ * | hook-type ]
+ Usage: unhook [ * | hook-type ]
+
This command permits you to flush hooks you have previously defined. You
can either remove all hooks by giving the ``*'' character as an argument,
All available functions, variables and menus are documented elsewhere in
this manual but ``features'' is specific to these two commands. To test
- for one, prefix one of the following keywords with feature_:
-
- ncurses, slang, iconv, idn, dotlock, standalone, pop, nntp, imap, ssl,
- gnutls, sasl, sasl2, libesmtp, compressed, color, classic_pgp,
- classic_smime, gpgme, header_cache
+ for one, prefix one of the following keywords with feature_: ncurses,
+ slang, iconv, idn, dotlock, standalone, pop, nntp, imap, ssl, gnutls,
+ sasl, sasl2, libesmtp, compressed, color, classic_pgp, classic_smime,
+ gpgme, header_cache
As an example, one can use the following in ˜/.muttngrc:
An example for testing for variable names can be used if users use
different revisions of mutt-ng whereby the older one may not have a
- certain variable. To test for the availability of imap-mail-check, use:
+ certain variable. To test for the availability of imap-mail-check , use:
ifdef imap_mail_check 'set imap_mail_check = 300'
regular expressions that match themselves. Any metacharacter with special
meaning may be quoted by preceding it with a backslash.
- The period ``.'' matches any single character. The caret ``^'' and the
+ The period ``.'' matches any single character. The caret ``^'' andthe
dollar sign ``$'' are metacharacters that respectively match the empty
string at the beginning and end of a line.
equivalent to [0-9].
Two additional special sequences can appear in character lists. These
- apply to non-ASCII character sets, which can have single symbols (called
- collating elements) that are represented with more than one character, as
- well as several characters that are equivalent for collating or sorting
- purposes:
+ apply to non-ASCII character sets, which can have single symbols
+ (calledcollating elements) that are represented with more than one
+ character, as well as several characters that are equivalent for collating
+ or sorting purposes:
Collating Symbols
grouped, ORed, and negated. For a complete listing of these patterns,
please refer to table patterns in the Reference chapter.
- It must be noted that in this table, EXPR, USER, ID and SUBJECT are
- regular expressions. For ranges, the forms <[MAX], >>[MIN], [MIN]- and
- -[MAX] are also possible.
+ It must be noted that in this table, EXPR is a regular expression. For
+ ranges, the forms <[MAX], >>[MIN], [MIN]- and -[MAX] are also possible.
2.1. Complex Patterns
margin needs to contain the information whether it goes ``forth'' or
``back'' in time, by using + and -. Then follows a number and a unit, i.e.
y for years, m for months, w for weeks and d for days. If you use the
- special * sign, it means that the error margin goes to both ``directions''
+ special * sign, it means that the error margin goes to both``directions''
in time.
~d 01/01/2005+1y
all dots in the expansion of <item> to underscores (_).
Also, there's a feature called Padding supplied by the following two
- expandos: %|X and %>X.
+ expandos: %|X and %>X .
%|X
In macro or push commands, you can use the ``tag-prefix-cond'' operator.
If there are no tagged messages, mutt will "eat" the rest of the macro to
- abort it's execution. Mutt-ng will stop "eating" the macro when it
+ abort it's execution.Mutt-ng will stop "eating" the macro when it
encounters the ``end-cond'' operator; after this operator the rest of the
- macro will be executed as normal.
+ macro will be executed asnormal.
5. Using Hooks
5.1. Message Matching in Hooks
- Hooks that act upon messages (send-hook, save-hook, fcc-hook,
- message-hook) are evaluated in a slightly different manner. For the other
- types of hooks, a regexp is sufficient. But in dealing with messages a
- finer grain of control is needed for matching since for different purposes
- you want to match different criteria.
+ Hooks that act upon messages (send-hook, save-hook, fcc-hook,message-hook
+ )are evaluated in a slightly different manner. For the other types of
+ hooks, a regexp is sufficient. But in dealing with messages a finer grain
+ of control is needed for matching since for different purposes you want to
+ match different criteria.
Mutt-ng allows the use of the patterns language for matching messages in
hook commands. This works in exactly the same way as it would when
- limiting or searching the mailbox, except that you are restricted to those
+ limiting orsearching the mailbox, except that you are restricted to those
operators which match information mutt extracts from the header of the
message (i.e. from, to, cc, date, subject, etc.).
set mbox='=INBOX'
mailboxes INBOX \
- MBOX1 \
- MBOX2 \
- ...
+ MBOX1 \
+ MBOX2 \
+ ...
You can also specify the colors for mailboxes with new mails by using:
The available functions are:
- sidebar-scroll-up Scrolls the mailbox list up 1 page
- sidebar-scroll-down Scrolls the mailbox list down 1 page
- sidebar-next Highlights the next mailbox
- sidebar-next-new Highlights the next mailbox with new mail
- sidebar-previous Highlights the previous mailbox
- sidebar-open Opens the currently highlighted mailbox
+ Table 4.1. Default Sidebar Function Bindings
+
+ +------------------------------------------------------------------------+
+ | Key | Function | Description |
+ |------+---------------------+-------------------------------------------|
+ | none | sidebar-scroll-up | Scrolls the mailbox list up 1 page |
+ |------+---------------------+-------------------------------------------|
+ | none | sidebar-scroll-down | Scrolls the mailbox list down 1 page |
+ |------+---------------------+-------------------------------------------|
+ | none | sidebar-next | Highlights the next mailbox |
+ |------+---------------------+-------------------------------------------|
+ | none | sidebar-next-new | Highlights the next mailbox with new mail |
+ |------+---------------------+-------------------------------------------|
+ | none | sidebar-previous | Highlights the previous mailbox |
+ |------+---------------------+-------------------------------------------|
+ | none | sidebar-open | Opens the currently highlighted mailbox |
+ +------------------------------------------------------------------------+
Reasonable key bindings look e.g. like this:
The wrapper script should accept the query on the command-line. It should
return a one line message, then each matching response on a single line,
- each line containing a tab separated address then name then some other
+ each line containing a tab separated address then name thensome other
optional information. On error, or if there are no matching addresses,
return a non-zero exit code and a one line error message.
to do a query from the index menu using the query function (default: Q).
This will prompt for a query, then bring up the query menu which will list
the matching responses. From the query menu, you can select addresses to
- create aliases, or to mail. You can tag multiple addresses to mail, start
- a new query, or have a new query appended to the current responses.
+ create aliases, or to mail. You can tag multiple addressesto mail, start a
+ new query, or have a new query appended to the current responses.
The other mechanism for accessing the query function is for address
completion, similar to the alias completion. In any prompt for address
query based on the current address you have typed. Like aliases, mutt will
look for what you have typed back to the last space or comma. If there is
a single response for that query, mutt will expand the address in place.
- If there are multiple responses, mutt will activate the query menu. At the
+ If there are multiple responses, mutt will activate the querymenu. At the
query menu, you can select one or more addresses to be added to the
prompt.
Mutt-ng supports reading and writing of four different mailbox formats:
mbox, MMDF, MH and Maildir. The mailbox type is autodetected, so there is
- no need to use a flag for different mailbox types. When creating new
- mailboxes, Mutt-ng uses the default specified with the mbox-type variable.
+ no need to use a flag for different mailbox types. When creating
+ newmailboxes, Mutt-ng uses the default specified with the mbox-type
+ variable.
mbox. This is the most widely used mailbox format for UNIX. All messages
are stored in a single file. Each message has a line of the form:
MH. A radical departure from mbox and MMDF, a mailbox consists of a
directory and each message is stored in a separate file. The filename
indicates the message number (however, this is may not correspond to the
- message number Mutt-ng displays). Deleted messages are renamed with a
- comma (,) prepended to the filename. Note: Mutt detects this type of
- mailbox by looking for either .mh_sequences or .xmhcache (needed to
- distinguish normal directories from MH mailboxes).
+ message number Mutt-ng displays). Deleted messages arerenamed with a comma
+ (,) prepended to the filename. Note: Mutt detects this type of mailbox by
+ looking for either .mh_sequences or .xmhcache (needed to distinguish
+ normal directories from MH mailboxes).
Maildir. The newest of the mailbox formats, used by the Qmail MTA (a
replacement for sendmail). Similar to MH, except that it adds three
- subdirectories of the mailbox: tmp, new and cur. Filenames for the
- messages are chosen in such a way they are unique, even when two programs
+ subdirectories of the mailbox: tmp, new and cur .Filenames for the
+ messages are chosen in such a way they are unique, even when twoprograms
are writing the mailbox over NFS, which means that no file locking is
needed.
automatically reply to the address given in the ``Reply-To'' field.
Mutt-ng uses the reply-to variable to help decide which address to use. If
set to ask-yes or ask-no, you will be prompted as to whether or not you
- would like to use the address given in the ``Reply-To'' field, or reply
+ would like to use the address given inthe ``Reply-To'' field, or reply
directly to the address given in the ``From'' field. When set to yes, the
``Reply-To'' field will be used when present.
expand ``X-Label:'' fields in the index, and Mutt-ng's pattern-matcher can
match regular expressions to ``X-Label:'' fields with the ``˜y''
selector. ``X-Label:'' is not a standard message header field, but it can
- easily be inserted by procmail and other mail filtering agents.
+ easily be inserted by procmailand other mail filtering agents.
Lastly, Mutt-ng has the ability to sort the mailbox into threads. A thread
is a group of messages which all relate to the same subject. This is
usually organized into a tree-like structure where a message and all of
its replies are represented graphically. If you've ever used a threaded
- news client, this is the same concept. It makes dealing with large volume
+ news client, this is the same concept. It makes dealingwith large volume
mailing lists easier because you can easily delete uninteresting threads
and quickly find topics of value.
On mailing lists, some people are in the bad habit of starting a new
discussion by hitting "reply" to any message from the list and changing
the subject to a totally unrelated one. You can fix such threads by using
- the ``break-thread'' function (bound by default to #), which will turn the
+ the ``break-thread'' function (boundby default to #), which will turn the
subthread starting from the current message into a whole different thread.
12. Delivery Status Notification (DSN) Support
To support this, there are two variables:
o dsn-notify is used to request receipts for different results (such as
- failed message, message delivered, etc.).
+ failed message,message delivered, etc.).
o dsn-return requests how much of your message should be returned with
the receipt (headers or full message).
prefix, ie: pops://[username@]popserver[:port]/.
Another way to access your POP3 mail is the fetch-mail function (default:
- G). It allows to connect to pop-host, fetch all your new mail and place it
+ G). It allows to connect to pop-host ,fetch all your new mail and place it
in the local spoolfile. After this point, Mutt-ng runs exactly as if the
mail had always been local.
{[username@]imapserver[:port][/ssl]}path/to/folder
Note that not all servers use / as the hierarchy separator. Mutt-ng should
- correctly notice which separator is being used by the server and convert
- paths accordingly.
+ correctly notice which separator is being used by the server and
+ convertpaths accordingly.
When browsing folders on an IMAP server, you can toggle whether to look at
only the folders you are subscribed to, or all folders with the
Polling for new mail on an IMAP server can cause noticeable delays. So,
you'll want to carefully tune the imap-mail-check and timeout variables.
- Note that if you are using mbox as the mail store on UW servers prior to
- v12.250, the server has been reported to disconnect a client if another
+ Note that if you are using mbox as the mail store on UW servers prior
+ tov12.250, the server has been reported to disconnect a client if another
client selects the same folder.
14.1. The Folder Browser
folder, you must use view-file instead (bound to space by default).
o You can create, delete and rename mailboxes with the create-mailbox,
- delete-mailbox, and rename-mailbox commands (default bindings: C, d
+ delete-mailbox, and rename-mailbox commands (default bindings: C , d
and r, respectively). You may also subscribe and unsubscribe to
mailboxes (normally these are bound to s and u, respectively).
methods (including DIGEST-MD5 and possibly GSSAPI), your entire session
will be encrypted and invisible to those teeming network snoops. It is the
best option if you have it. To use it, you must have the Cyrus SASL
- library installed on your system and compile mutt with the --with-sasl
+ libraryinstalled on your system and compile mutt with the --with-sasl
flag.
Mutt-ng will try whichever methods are compiled in and available on the
score ~* =42
-
This tells mutt-ng to apply a score of 42 to all messages whose sender
specified a valid realname and a valid email address. Using
score !~* =42
-
on the contrary applies a score of 42 to all messages not matching those
criteria which are very strict:
<ftp://ftp.rfc-editor.org/in-notes/rfc2822.txt>
o the name must consist of at least 2 fields whereby a field must not
- end in a dot. This means that ``Joe User'' and ``Joe A. User'' are
+ end in a dot. This means that ``Joe User'' and ``Joe A.User'' are
valid while ``J. User'' and ``J. A. User'' aren't.
o it's assumed that users are interested in reading their own mail and
- mail from people who they have defined an alias for so that those 2
+ mail from people who they have defined an alias forso that those 2
groups of messages are excluded from the strict rules.
16. SMTP Support (OPTIONAL)
output muttng -v contains +USE_LIBESMTP, this will be or is the case
already. The SMTP support includes support for Delivery Status
Notification (see dsn section) as well as handling the 8BITMIME flag
- controlled via use-8bitmime.
+ controlled via use-8bitmime .
To enable sending mail directly via SMTP without an MTA such as Postfix or
SSMTP and the like, simply set the smtp-host variable pointing to your
to work, first of all Mutt-ng must be built with SSL or GNUTLS. Secondly,
the smtp-use-tls variable must be either set to ``enabled'' or
``required.'' In both cases, StartTLS will be used if the server supports
- it: for the second case, the connection will fail if it doesn't while
+ it: for the second case, the connection will fail ifit doesn't while
switching back to unencrypted communication for the first one.
Some mail providers require user's to set a particular envelope sender,
space like http://www.mutt.org/), it is efficient to get a menu with all
the URLs and start a WWW browser on one of them. This functionality is
provided by the external urlview program which can be retrieved at
- ftp://ftp.mutt.org/mutt/contrib/ and the configuration commands:
+ ftp://ftp.mutt.org/mutt/contrib/ > and the configuration commands:
macro index \cb |urlview\n
macro pager \cb |urlview\n
accepted format, appending to it and converting back to the user-defined
format.
- There are three hooks defined (open-hook, close-hook and append-hook)
- which define commands to uncompress and compress a folder and to append
+ There are three hooks defined (open-hook, close-hook and append-hook
+ )which define commands to uncompress and compress a folder and to append
messages to an existing compressed folder respectively.
For example:
close-hook \\.gz$ "gzip -c %t > %f"
append-hook \\.gz$ "gzip -c %t >> %f"
- You do not have to specify all of the commands. If you omit append-hook,
- the folder will be open and closed again each time you will add to it. If
+ You do not have to specify all of the commands. If you omit append-hook
+ ,the folder will be open and closed again each time you will add to it. If
you omit close-hook (or give empty command) , the folder will be open in
the mode. If you specify append-hook though you'll be able to append to
the folder.
it is not compressed. This is important because it allows the use of
programs that do not have well defined extensions. Just use "." as a
regexp. But this may be surprising if your compressing script produces
- empty files. In this situation, unset save-empty, so that the compressed
+ empty files. In this situation, unset save-empty ,so that the compressed
file will be removed if you delete all of the messages.
19.1. Open a compressed mailbox for reading
19.2. Write a compressed mailbox
- Usage: close-hook regexp "command"
+ Usage: close-hook regexp"command"
This is used to close the folder that was open with the open-hook command
after some changes were made to it.
The command string is the command that can be used for closing the folders
whose names match regexp. It has the same format as in the open-hook
command. Temporary folder in this case is the folder previously produced
- by the <open-hook command.
+ by the < open-hook command.
The command should not remove the decompressed file. The command should
return non-zero exit status if it fails, so mutt knows something's wrong.
19.3. Append a message to a compressed mailbox
- Usage: append-hook regexp "command"
+ Usage: append-hook regexp"command"
This command is used for saving to an existing compressed folder. The
command is the command that can be used for appending to the folders whose
names match regexp. It has the same format as in the open-hook command.
- The temporary folder in this case contains the messages that are being
- appended.
+ The temporary folder in this case contains the messages that are
+ beingappended.
The command should not remove the decompressed file. The command should
return non-zero exit status if it fails, so mutt knows something's wrong.
When append-hook is used, the folder is not opened, which saves time, but
this means that we can not find out what the folder type is. Thus the
- default (mbox-type) type is always supposed (i.e. this is the format used
+ default ( mbox-type )type is always supposed (i.e. this is the format used
for the temporary folder).
If the file does not exist when you save to it, close-hook is called, and
If the command is empty, this operation is disabled for this file type. In
this case, the folder will be open and closed again (using open-hook and
- close-hookrespectively) each time you will add to it.
+ close-hook respectively) each time you will add to it.
19.4. Encrypted folders
The compressed folders support can also be used to handle encrypted
- folders. If you want to encrypt a folder with PGP, you may want to use the
+ folders. If you want to encrypt a folder with PGP, you may want to usethe
following hooks:
open-hook \\.pgp$ "pgp -f < %f > %t"
so there is no append-hook defined.
Note: the folder is temporary stored decrypted in the /tmp directory,
- where it can be read by your system administrator. So think about the
+ where it can be read by your system administrator. So thinkabout the
security aspects of this.
Chapter 5. Mutt-ng's MIME Support
Quite a bit of effort has been made to make Mutt-ng the premier text-mode
MIME MUA. Every effort has been made to provide the functionality that the
discerning MIME user requires, and the conformance to the standards
- wherever possible. When configuring Mutt-ng for MIME, there are two extra
- types of configuration files which Mutt-ng uses. One is the mime.types
- file, which contains the mapping of file extensions to IANA MIME types.
- The other is the mailcap file, which specifies the external commands to
- use for handling specific MIME types.
+ wherever possible. When configuring Mutt-ng for MIME, there are two
+ extratypes of configuration files which Mutt-ng uses. One is the
+ mime.types file, which contains the mapping of file extensions to IANA
+ MIME types. The other is the mailcap file, which specifies the external
+ commands to use for handling specific MIME types.
1. Using MIME in Mutt
When you select a message from the index and view it in the pager, Mutt
decodes the message to a text representation. Mutt-ng internally supports
a number of MIME types, including text/plain, text/enriched,
- message/rfc822, and message/news. In addition, the export controlled
+ message/rfc822, and message/news .In addition, the export controlled
version of Mutt-ng recognizes a variety of PGP MIME types, including
PGP/MIME and application/pgp.
1.2. The Attachment Menu
The default binding for view-attachments is `v', which displays the
- attachment menu for a message. The attachment menu displays a list of the
+ attachment menu for a message. The attachment menu displays a list ofthe
attachments in a message. From the attachment menu, you can save, print,
pipe, delete, and view attachments. You can apply these operations to a
group of attachments at once, by tagging the attachments and by using the
Attachments appear as follows:
- - 1 [text/plain, 7bit, 1K] /tmp/mutt-euler-8082-0 <no description>
- 2 [applica/x-gunzip, base64, 422K] ~/src/mutt-0.85.tar.gz <no description>
+ 1 [text/plain, 7bit, 1K] /tmp/mutt-euler-8082-0 <no description>
+ 2 [applica/x-gunzip, base64, 422K] ~/src/mutt-0.85.tar.gz <no description>
The '-' denotes that Mutt-ng will delete the file after sending (or
postponing, or canceling) the message. It can be toggled with the
R). The final field is the description of the attachment, and can be
changed with the edit-description command (default: d).
-2. MIME Type configuration with mime.types
+2. MIME Type configuration with mime.types
When you add an attachment to your mail message, Mutt-ng searches your
- personal mime.types file at ${HOME}/.mime.types, and then the system
+ personal mime.types file at ${HOME}/.mime.types ,and then the system
mime.types file at /usr/local/share/mutt/mime.types or /etc/mime.types
The mime.types file consist of lines containing a MIME type and a space
molecular viewers. Non-recognised mime types should only be used if the
recipient of the message is likely to be expecting such attachments.
-3. MIME Viewer configuration with mailcap
+3. MIME Viewer configuration with mailcap
Mutt-ng supports RFC 1524 MIME Configuration, in particular the Unix
specific format specified in Appendix A of RFC 1524. This file format is
A blank line is blank.
A definition line consists of a content type, a view command, and any
- number of optional fields. Each field of a definition line is divided by a
+ number of optional fields. Each field of a definition line is dividedby a
semicolon ';' character.
The content type is specified in the MIME standard type/subtype method.
For example, text/plain, text/html, image/gif, etc. In addition, the
mailcap format includes two formats for wildcards, one using the special
'*' subtype, the other is the implicit wild, where you only include the
- major type. For example, image/*, or video, will match all image types and
+ major type. For example, image/* ,or video, will match all image types and
video types, respectively.
The view command is a Unix command for viewing the type specified. There
find the line which calls lynx, and run it. This causes lynx to
continuously spawn itself to view the object.
- On the other hand, maybe you don't want to use lynx interactively, you
- just want to have it convert the text/html to text/plain, then you can
- use:
+ On the other hand, maybe you don't want to use lynx interactively, youjust
+ want to have it convert the text/html to text/plain, then you can use:
text/html; lynx -dump %s | more
itself subject to any further expansion):
text/test-mailcap-bug; cat %s; copiousoutput; test=charset=%{charset} \
- && test "`echo $charset | tr '[A-Z]' '[a-z]'`" != iso-8859-1
+ && test "`echo $charset | tr '[A-Z]' '[a-z]'`" != iso-8859-1
3.3. Advanced mailcap Usage
needsterminal
- Mutt-ng uses this flag when viewing attachments with auto-view, in
+ Mutt-ng uses this flag when viewing attachments with auto-view ,in
order to decide whether it should honor the setting of the
wait-key variable or not. When an attachment is viewed using an
interactive program, and the corresponding mailcap entry has a
- needsterminal flag, Mutt-ng will use wait-key and the exit status
- of the program to decide if it will ask you to press a key after
- the external program has exited. In all other situations it will
- not prompt you for a key.
+ needsterminal flag, Mutt-ng will use wait-key and the exit
+ statusof the program to decide if it will ask you to press a key
+ after the external program has exited. In all other situations it
+ will not prompt you for a key.
compose=<command>
image/*; xv %s
image/gif; ; print= anytopnm %s | pnmtops | lpr; \
- nametemplate=%s.gif
+ nametemplate=%s.gif
Mutt-ng will skip the image/* entry and use the image/gif entry with the
print command.
# Send html to a running netscape by remote
text/html; netscape -remote 'openURL(%s)'; test=RunningNetscape
-
# If I'm not running netscape but I am running X, start netscape on the
# object
text/html; netscape %s; test=RunningX
# Use xv to view images if I'm running X
# In addition, this uses the \ to extend the line and set my editor
# for images
- image/*;xv %s; test=RunningX; \
- edit=xpaint %s
+ image/*;xv %s; test=RunningX; edit=xpaint %s
# Convert images to text using the netpbm tools
image/*; (anytopnm %s | pnmscale -xysize 80 46 | ppmtopgm | pgmtopbm |
4. MIME Autoview
- In addition to explicitly telling Mutt-ng to view an attachment with the
- MIME viewer defined in the mailcap file, Mutt-ng has support for
+ In addition to explicitly telling Mutt-ng to view an attachment with
+ theMIME viewer defined in the mailcap file, Mutt-ng has support for
automatically viewing MIME attachments while in the pager.
To work, you must define a viewer in the mailcap file which uses the
For instance, if you set auto_view to:
- auto_view text/html application/x-gunzip application/postscript image/gif application/x-tar-gz
+ auto_view text/html application/x-gunzip application/postscript
+ image/gif application/x-tar-gz
Mutt-ng could use the following mailcap entries to automatically view
attachments of these types.
Mutt-ng has some heuristics for determining which attachment of a
multipart/alternative type to display. First, mutt will check the
- alternative_order list to determine if one of the available types is
+ alternative_order list to determine if one of the available typesis
preferred. The alternative_order list consists of a number of MIME types
in order, including support for implicit and explicit wildcards, for
example:
- alternative_order text/enriched text/plain text application/postscript image/*
+ alternative_order text/enriched text/plain text
+ application/postscript image/*
Next, mutt will check if any of the types have a defined auto-view, and
use that. Failing that, Mutt-ng will look for any text type. As a last
- attempt, mutt will look for any type it knows how to handle.
+ attempt, mutt willlook for any type it knows how to handle.
To remove a MIME type from the alternative_order list, use the
unalternative_order command.
6. MIME Lookup
Mutt-ng's mime_lookup list specifies a list of mime-types that should not
- be treated according to their mailcap entry. This option is designed to
- deal with binary types such as application/octet-stream. When an
+ be treated according to their mailcap entry. This option is designed
+ todeal with binary types such as application/octet-stream. When an
attachment's mime-type is listed in mime_lookup, then the extension of the
filename will be compared to the list of extensions in the mime.types
file. The mime-type associated with this extension will then be used to
spool mailbox. However, it is possible to read other mailboxes and to send
messages from the command line as well.
- -A expand an alias
- -a attach a file to a message
- -b specify a blind carbon-copy (BCC) address
- -c specify a carbon-copy (Cc) address
- -e specify a config command to be run after initialization files are read
- -f specify a mailbox to load
- -F specify an alternate file to read initialization commands
- -h print help on command line options
- -H specify a draft file from which to read a header and body
- -i specify a file to include in a message composition
- -m specify a default mailbox type
- -n do not read the system Muttngrc
- -p recall a postponed message
- -Q query a configuration variable
- -R open mailbox in read-only mode
- -s specify a subject (enclose in quotes if it contains spaces)
- -t dump the value of all variables to stdout
- -T dump the value of all changed variables to stdout
- -v show version number and compile-time definitions
- -x simulate the mailx(1) compose mode
- -y show a menu containing the files specified by the mailboxes command
- -z exit immediately if there are no messages in the mailbox
- -Z open the first folder with new message,exit immediately if none
+ Table 7.1. Mutt-NG Command Line Options
+
+ +------------------------------------------------------------------------+
+ | Option | Description |
+ |--------+---------------------------------------------------------------|
+ | -A | expand an alias |
+ |--------+---------------------------------------------------------------|
+ | -a | attach a file to a message |
+ |--------+---------------------------------------------------------------|
+ | -b | specify a blind carbon-copy (BCC) address |
+ |--------+---------------------------------------------------------------|
+ | -c | specify a carbon-copy (Cc) address |
+ |--------+---------------------------------------------------------------|
+ | -e | specify a config command to be run after initialization files |
+ | | are read |
+ |--------+---------------------------------------------------------------|
+ | -f | specify a mailbox to load |
+ |--------+---------------------------------------------------------------|
+ | -F | specify an alternate file to read initialization commands |
+ |--------+---------------------------------------------------------------|
+ | -h | print help on command line options |
+ |--------+---------------------------------------------------------------|
+ | -H | specify a draft file from which to read a header and body |
+ |--------+---------------------------------------------------------------|
+ | -i | specify a file to include in a message composition |
+ |--------+---------------------------------------------------------------|
+ | -m | specify a default mailbox type |
+ |--------+---------------------------------------------------------------|
+ | -n | do not read the system Muttngrc |
+ |--------+---------------------------------------------------------------|
+ | -p | recall a postponed message |
+ |--------+---------------------------------------------------------------|
+ | -Q | query a configuration variable |
+ |--------+---------------------------------------------------------------|
+ | -R | open mailbox in read-only mode |
+ |--------+---------------------------------------------------------------|
+ | -s | specify a subject (enclose in quotes if it contains spaces) |
+ |--------+---------------------------------------------------------------|
+ | -t | dump the value of all variables to stdout |
+ |--------+---------------------------------------------------------------|
+ | -T | dump the value of all changed variables to stdout |
+ |--------+---------------------------------------------------------------|
+ | -v | show version number and compile-time definitions |
+ |--------+---------------------------------------------------------------|
+ | -x | simulate the mailx(1) compose mode |
+ |--------+---------------------------------------------------------------|
+ | -y | show a menu containing the files specified by the mailboxes |
+ | | command |
+ |--------+---------------------------------------------------------------|
+ | -z | exit immediately if there are no messages in the mailbox |
+ |--------+---------------------------------------------------------------|
+ | -Z | open the first folder with new message,exit immediately if |
+ | | none |
+ +------------------------------------------------------------------------+
To read messages in a mailbox
2. Patterns
- ~A all messages
- ~b EXPR messages which contain EXPR in the message body
- ~B EXPR messages which contain EXPR in the whole message
- ~c USER messages carbon-copied to USER
- ~C EXPR message is either to: or cc: EXPR
- ~D deleted messages
- ~d [MIN]-[MAX] messages with ``date-sent'' in a Date range
- ~E expired messages
- ~e EXPR message which contains EXPR in the ``Sender'' field
- ~F flagged messages
- ~f USER messages originating from USER
- ~g cryptographically signed messages
- ~G cryptographically encrypted messages
- ~H EXPR messages with a spam attribute matching EXPR
- ~h EXPR messages which contain EXPR in the message header
- ~k message contains PGP key material
- ~i ID message which match ID in the ``Message-ID'' field
- ~L EXPR message is either originated or received by EXPR
- ~l message is addressed to a known mailing list
- ~m [MIN]-[MAX] message in the range MIN to MAX *)
- ~M multipart messages
- ~n [MIN]-[MAX] messages with a score in the range MIN to MAX *)
- ~N new messages
- ~O old messages
- ~p message is addressed to you (consults alternates)
- ~P message is from you (consults alternates)
- ~Q messages which have been replied to
- ~R read messages
- ~r [MIN]-[MAX] messages with ``date-received'' in a Date range
- ~S superseded messages
- ~s SUBJECT messages having SUBJECT in the ``Subject'' field.
- ~T tagged messages
- ~t USER messages addressed to USER
- ~U unread messages
- ~v message is part of a collapsed thread.
- ~V cryptographically verified messages
- ~w EXPR messages which contain EXPR in the `Newsgroups' field
- (if compiled with NNTP support)
- ~x EXPR messages which contain EXPR in the `References' field
- ~y EXPR messages which contain EXPR in the `X-Label' field
- ~z [MIN]-[MAX] messages with a size in the range MIN to MAX *)
- ~= duplicated messages (see $duplicate_threads)
- ~$ unreferenced messages (requires threaded view)
- ~* ``From'' contains realname and (syntactically) valid
- address (excluded are addresses matching against
- alternates or any alias)
-
- Where EXPR, USER, ID, and SUBJECT are regexp. Special attention has to be
- made when using regular expressions inside of patterns. Specifically,
- Mutt-ng's parser for these patterns will strip one level of backslash (\),
- which is normally used for quoting. If it is your intention to use a
- backslash in the regular expression, you will need to use two backslashes
- instead (\\).
-
- *) The forms <[MAX], >[MIN], [MIN]- and -[MAX] are allowed, too.
+ Table 7.2. Patterns
+
+ +------------------------------------------------------------------------+
+ | Pattern Modifier | Argument | Description |
+ |------------------+-------------+---------------------------------------|
+ | ~A | | all messages |
+ |------------------+-------------+---------------------------------------|
+ | ~b | EXPR | messages which contain EXPR in the |
+ | | | message body |
+ |------------------+-------------+---------------------------------------|
+ | ~B | EXPR | messages which contain EXPR in the |
+ | | | whole message |
+ |------------------+-------------+---------------------------------------|
+ | ~c | EXPR | messages carbon-copied to EXPR |
+ |------------------+-------------+---------------------------------------|
+ | ~C | EXPR | message is either to: or cc: EXPR |
+ |------------------+-------------+---------------------------------------|
+ | ~D | | deleted messages |
+ |------------------+-------------+---------------------------------------|
+ | ~d | [MIN]-[MAX] | messages with ``date-sent'' in a Date |
+ | | | range |
+ |------------------+-------------+---------------------------------------|
+ | ~E | | expired messages |
+ |------------------+-------------+---------------------------------------|
+ | ~e | EXPR | message which contains EXPR in the |
+ | | | ``Sender'' field |
+ |------------------+-------------+---------------------------------------|
+ | ~F | | flagged messages |
+ |------------------+-------------+---------------------------------------|
+ | ~f | EXPR | messages originating from EXPR |
+ |------------------+-------------+---------------------------------------|
+ | ~g | | cryptographically signed messages |
+ |------------------+-------------+---------------------------------------|
+ | ~G | | cryptographically encrypted messages |
+ |------------------+-------------+---------------------------------------|
+ | ~H | EXPR | messages with a spam attribute |
+ | | | matching EXPR |
+ |------------------+-------------+---------------------------------------|
+ | ~h | EXPR | messages which contain EXPR in the |
+ | | | message header |
+ |------------------+-------------+---------------------------------------|
+ | ~k | | message contains PGP key material |
+ |------------------+-------------+---------------------------------------|
+ | ~i | EXPR | message which match ID in the |
+ | | | ``Message-ID'' field |
+ |------------------+-------------+---------------------------------------|
+ | ~L | EXPR | message is either originated or |
+ | | | received by EXPR |
+ |------------------+-------------+---------------------------------------|
+ | ~l | | message is addressed to a known |
+ | | | mailing list |
+ |------------------+-------------+---------------------------------------|
+ | ~m | [MIN]-[MAX] | message in the range MIN to MAX *) |
+ |------------------+-------------+---------------------------------------|
+ | ~M | | multipart messages |
+ |------------------+-------------+---------------------------------------|
+ | ~n | [MIN]-[MAX] | messages with a score in the range |
+ | | | MIN to MAX *) |
+ |------------------+-------------+---------------------------------------|
+ | ~N | | new messages |
+ |------------------+-------------+---------------------------------------|
+ | ~O | | old messages |
+ |------------------+-------------+---------------------------------------|
+ | ~p | | message is addressed to you (consults |
+ | | | alternates) |
+ |------------------+-------------+---------------------------------------|
+ | ~P | | message is from you (consults |
+ | | | alternates) |
+ |------------------+-------------+---------------------------------------|
+ | ~Q | | messages which have been replied to |
+ |------------------+-------------+---------------------------------------|
+ | ~R | | read messages |
+ |------------------+-------------+---------------------------------------|
+ | ~r | [MIN]-[MAX] | messages with ``date-received'' in a |
+ | | | Date range |
+ |------------------+-------------+---------------------------------------|
+ | ~S | | superseded messages |
+ |------------------+-------------+---------------------------------------|
+ | ~s | EXPR | messages having EXPR in the |
+ | | | ``Subject'' field. |
+ |------------------+-------------+---------------------------------------|
+ | ~T | | tagged messages |
+ |------------------+-------------+---------------------------------------|
+ | ~t | EXPR | messages addressed to EXPR |
+ |------------------+-------------+---------------------------------------|
+ | ~U | | unread messages |
+ |------------------+-------------+---------------------------------------|
+ | ~u | | message is addressed to a subscribed |
+ | | | mailing list |
+ |------------------+-------------+---------------------------------------|
+ | ~v | | message is part of a collapsed |
+ | | | thread. |
+ |------------------+-------------+---------------------------------------|
+ | ~V | | cryptographically verified messages |
+ |------------------+-------------+---------------------------------------|
+ | | | messages which contain EXPR in the |
+ | ~w | EXPR | `Newsgroups' field (if compiled with |
+ | | | NNTP support) |
+ |------------------+-------------+---------------------------------------|
+ | ~x | EXPR | messages which contain EXPR in the |
+ | | | `References' field |
+ |------------------+-------------+---------------------------------------|
+ | ~y | EXPR | messages which contain EXPR in the |
+ | | | `X-Label' field |
+ |------------------+-------------+---------------------------------------|
+ | ~z | [MIN]-[MAX] | messages with a size in the range MIN |
+ | | | to MAX *) |
+ |------------------+-------------+---------------------------------------|
+ | ~= | | duplicated messages (see |
+ | | | $duplicate_threads) |
+ |------------------+-------------+---------------------------------------|
+ | ~$ | | unreferenced messages (requires |
+ | | | threaded view) |
+ |------------------+-------------+---------------------------------------|
+ | | | ``From'' contains realname and |
+ | ~* | | (syntactically) valid address |
+ | | | (excluded are addresses matching |
+ | | | against alternates or any alias) |
+ +------------------------------------------------------------------------+
+
+ Where EXPR are regexp. Special attention has to be made when using regular
+ expressions inside of patterns. Specifically, Mutt-ng's parser for these
+ patterns will strip one level of backslash (\), which is normally used for
+ quoting. If it is your intention to use a backslash in the regular
+ expression, you will need to use two backslashes instead (\\).
+
+ *) The forms <[MAX], >[MIN] , [MIN]- and -[MAX] are allowed, too.
3. Configuration Commands
o account-hook pattern command
- o alias key address [ , address, ... ]
+ o alias key address [ , address ,... ]
o alias [ * | key ... ]
o reply-hook regexp command
- o set [no|inv]variable[=value] [ variable ... ]
+ o set [no|inv]variable[=value ] [ variable ... ]
o set variable [variable ... ]
removed already. The left column contains the old synonym variables, the
right column the full/new name:
- edit_hdrs edit_headers
- forw_decode forward_decode
- forw_format forward_format
- forw_quote forward_quote
- hdr_format index_format
- indent_str indent_string
- mime_fwd mime_forward
- msg_format message_format
- pgp_autosign crypt_autosign
- pgp_autoencrypt crypt_autoencrypt
- pgp_replyencrypt crypt_replyencrypt
- pgp_replysign crypt_replysign
- pgp_replysignencrypted crypt_replysignencrypted
- pgp_verify_sig crypt_verify_sig
- pgp_create_traditional pgp_autoinline
- pgp_auto_traditional pgp_replyinline
- forw_decrypt forward_decrypt
- smime_sign_as smime_default_key
- post_indent_str post_indent_string
- print_cmd print_command
- shorten_hierarchy sidebar_shorten_hierarchy
- ask_followup_to nntp_ask_followup_to
- ask_x_comment_to nntp_ask_x_comment_to
- catchup_newsgroup nntp_catchup
- followup_to_poster nntp_followup_to_poster
- group_index_format nntp_group_index_format
- inews nntp_inews
- mime_subject nntp_mime_subject
- news_cache_dir nntp_cache_dir
- news_server nntp_host
- newsrc nntp_newsrc
- nntp_poll nntp_mail_check
- pop_checkinterval pop_mail_check
- post_moderated nntp_post_moderated
- save_unsubscribed nntp_save_unsubscribed
- show_new_news nntp_show_new_news
- show_only_unread nntp_show_only_unread
- x_comment_to nntp_x_comment_to
- smtp_auth_username smtp_user
- smtp_auth_password smtp_pass
+ Table 7.3. Obsolete Variables
+
+ +----------------------------------------------------+
+ | Old Name | New Name |
+ |------------------------+---------------------------|
+ | edit_hdrs | edit_headers |
+ |------------------------+---------------------------|
+ | forw_decode | forward_decode |
+ |------------------------+---------------------------|
+ | forw_format | forward_format |
+ |------------------------+---------------------------|
+ | forw_quote | forward_quote |
+ |------------------------+---------------------------|
+ | hdr_format | index_format |
+ |------------------------+---------------------------|
+ | indent_str | indent_string |
+ |------------------------+---------------------------|
+ | mime_fwd | mime_forward |
+ |------------------------+---------------------------|
+ | msg_format | message_format |
+ |------------------------+---------------------------|
+ | pgp_autosign | crypt_autosign |
+ |------------------------+---------------------------|
+ | pgp_autoencrypt | crypt_autoencrypt |
+ |------------------------+---------------------------|
+ | pgp_replyencrypt | crypt_replyencrypt |
+ |------------------------+---------------------------|
+ | pgp_replysign | crypt_replysign |
+ |------------------------+---------------------------|
+ | pgp_replysignencrypted | crypt_replysignencrypted |
+ |------------------------+---------------------------|
+ | pgp_verify_sig | crypt_verify_sig |
+ |------------------------+---------------------------|
+ | pgp_create_traditional | pgp_autoinline |
+ |------------------------+---------------------------|
+ | pgp_auto_traditional | pgp_replyinline |
+ |------------------------+---------------------------|
+ | forw_decrypt | forward_decrypt |
+ |------------------------+---------------------------|
+ | smime_sign_as | smime_default_key |
+ |------------------------+---------------------------|
+ | post_indent_str | post_indent_string |
+ |------------------------+---------------------------|
+ | print_cmd | print_command |
+ |------------------------+---------------------------|
+ | shorten_hierarchy | sidebar_shorten_hierarchy |
+ |------------------------+---------------------------|
+ | ask_followup_to | nntp_ask_followup_to |
+ |------------------------+---------------------------|
+ | ask_x_comment_to | nntp_ask_x_comment_to |
+ |------------------------+---------------------------|
+ | catchup_newsgroup | nntp_catchup |
+ |------------------------+---------------------------|
+ | followup_to_poster | nntp_followup_to_poster |
+ |------------------------+---------------------------|
+ | group_index_format | nntp_group_index_format |
+ |------------------------+---------------------------|
+ | inews | nntp_inews |
+ |------------------------+---------------------------|
+ | mime_subject | nntp_mime_subject |
+ |------------------------+---------------------------|
+ | news_cache_dir | nntp_cache_dir |
+ |------------------------+---------------------------|
+ | news_server | nntp_host |
+ |------------------------+---------------------------|
+ | newsrc | nntp_newsrc |
+ |------------------------+---------------------------|
+ | nntp_poll | nntp_mail_check |
+ |------------------------+---------------------------|
+ | pop_checkinterval | pop_mail_check |
+ |------------------------+---------------------------|
+ | post_moderated | nntp_post_moderated |
+ |------------------------+---------------------------|
+ | save_unsubscribed | nntp_save_unsubscribed |
+ |------------------------+---------------------------|
+ | show_new_news | nntp_show_new_news |
+ |------------------------+---------------------------|
+ | show_only_unread | nntp_show_only_unread |
+ |------------------------+---------------------------|
+ | x_comment_to | nntp_x_comment_to |
+ |------------------------+---------------------------|
+ | smtp_auth_username | smtp_user |
+ |------------------------+---------------------------|
+ | smtp_auth_password | smtp_pass |
+ |------------------------+---------------------------|
+ | user_agent | agent_string |
+ +----------------------------------------------------+
The contrib subdirectory contains a script named update-config.pl which
eases migration.
Type: system property
- Value: 474
+ Value: 481
This is a read-only system property and specifies muttng's subversion
revision string.
This variable, when set, makes the thread tree narrower, allowing deeper
threads to fit on the screen.
-160. nntp_ask_followup_to
+160. net_inc
+
+ Type: number
+
+ Default: 10
+
+ Operations that expect to transfer a large amount of data over the network
+ will update their progress every net_inc kilobytes. If set to 0, no
+ progress messages will be displayed.
+
+ See also ``$read_inc'' and ``$write_inc''.
+
+161. nntp_ask_followup_to
Type: boolean
If set, Mutt-ng will prompt you for the Followup-To: header field before
editing the body of an outgoing news article.
-161. nntp_ask_x_comment_to
+162. nntp_ask_x_comment_to
Type: boolean
If set, Mutt-ng will prompt you for the X-Comment-To: header field before
editing the body of an outgoing news article.
-162. nntp_cache_dir
+163. nntp_cache_dir
Type: path
As for the header caching in connection with IMAP and/or Maildir, this
drastically increases speed and lowers traffic.
-163. nntp_catchup
+164. nntp_catchup
Type: quadoption
If this variable is set, Mutt-ng will mark all articles in a newsgroup as
read when you leaving it.
-164. nntp_context
+165. nntp_context
Type: number
If there're more articles than defined with $nntp_context, all older ones
will be removed/not shown in the index.
-165. nntp_followup_to_poster
+166. nntp_followup_to_poster
Type: quadoption
Followup-To: header field, a follow-up to the newsgroup is not permitted.
The message will be mailed to the submitter of the message via mail.
-166. nntp_group_index_format
+167. nntp_group_index_format
Type: string
%|X pad to the end of the line with character "X"
-167. nntp_host
+168. nntp_host
Type: string
presents a security risk since the superuser of your machine may read it
regardless of the file's permissions.
-168. nntp_inews
+169. nntp_inews
Type: path
Example: set inews="/usr/local/bin/inews -hS"
-169. nntp_load_description
+170. nntp_load_description
Type: boolean
This variable controls whether or not descriptions for newsgroups are to
be loaded when subscribing to a newsgroup.
-170. nntp_mail_check
+171. nntp_mail_check
Type: number
new article will cause a recheck for new news. If set to 0, Mutt-ng will
recheck on each operation in index (stepping, read article, etc.).
-171. nntp_mime_subject
+172. nntp_mime_subject
Type: boolean
Note: Only change this setting if you know what you are doing.
-172. nntp_newsrc
+173. nntp_newsrc
Type: path
%s newsserver name
-173. nntp_pass
+174. nntp_pass
Type: string
since the superuser of your machine may read it regardless of the file's
permissions.
-174. nntp_post_moderated
+175. nntp_post_moderated
Type: quadoption
Note: if the newsserver does not support posting to that newsgroup or a
group is totally read-only, that posting will not have any effect.
-175. nntp_reconnect
+176. nntp_reconnect
Type: quadoption
Controls whether or not Mutt-ng will try to reconnect to a newsserver when
the was connection lost.
-176. nntp_save_unsubscribed
+177. nntp_save_unsubscribed
Type: boolean
When set, info about unsubscribed newsgroups will be saved into the
``newsrc'' file and into the news cache.
-177. nntp_show_new_news
+178. nntp_show_new_news
Type: boolean
controls whether or not the number of new articles of subscribed
newsgroups will be checked.
-178. nntp_show_only_unread
+179. nntp_show_only_unread
Type: boolean
If set, only subscribed newsgroups that contain unread articles will be
displayed in the newsgroup browser.
-179. nntp_user
+180. nntp_user
Type: string
Your login name on the NNTP server. If unset and the server requires
authentification, Mutt-ng will prompt you for your account name.
-180. nntp_x_comment_to
+181. nntp_x_comment_to
Type: boolean
full name of the original article author) to articles that you followup
to.
-181. operating_system
+182. operating_system
Type: string
It may, for example, look as: ``mutt-ng 1.5.9i (Linux)''.
-182. pager
+183. pager
Type: path
pager, and screen resizes cause lines longer than the screen width to be
badly formatted in the help menu.
-183. pager_context
+184. pager_context
Type: number
Mutt-ng will display the line after the last one on the screen at the top
of the next page (0 lines of context).
-184. pager_format
+185. pager_format
Type: string
displayed before each message in either the internal or an external pager.
The valid sequences are listed in the ``$index_format'' section.
-185. pager_index_lines
+186. pager_index_lines
Type: number
of messages in the current folder is less than pager_index_lines, then the
index will only use as many lines as it needs.
-186. pager_stop
+187. pager_stop
Type: boolean
When set, the internal-pager will not move to the next message when you
are at the end of a message and invoke the next-page function.
-187. pgp_auto_decode
+188. pgp_auto_decode
Type: boolean
checked with the check-traditional-pgp function, Mutt-ng will
automatically check the message for traditional pgp.
-188. pgp_autoinline
+189. pgp_autoinline
Type: boolean
Also note that using the old-style PGP message format is strongly
deprecated. (PGP only)
-189. pgp_check_exit
+190. pgp_check_exit
Type: boolean
signing or encrypting. A non-zero exit code means that the subprocess
failed. (PGP only)
-190. pgp_clearsign_command
+191. pgp_clearsign_command
Type: string
Note that the use of this format is strongly deprecated. (PGP only)
-191. pgp_decode_command
+192. pgp_decode_command
Type: string
samples/ subdirectory which has been installed on your system alongside
the documentation. (PGP only)
-192. pgp_decrypt_command
+193. pgp_decrypt_command
Type: string
This command is used to decrypt a PGP encrypted message. (PGP only)
-193. pgp_encrypt_only_command
+194. pgp_encrypt_only_command
Type: string
This command is used to encrypt a body part without signing it. (PGP only)
-194. pgp_encrypt_sign_command
+195. pgp_encrypt_sign_command
Type: string
This command is used to both sign and encrypt a body part. (PGP only)
-195. pgp_entry_format
+196. pgp_entry_format
Type: string
(PGP only)
-196. pgp_export_command
+197. pgp_export_command
Type: string
This command is used to export a public key from the user's key ring. (PGP
only)
-197. pgp_getkeys_command
+198. pgp_getkeys_command
Type: string
This command is invoked whenever Mutt-ng will need public key information.
%r is the only printf(3)-like sequence used with this format. (PGP only)
-198. pgp_good_sign
+199. pgp_good_sign
Type: regular expression
text. Use this variable if the exit code from the command is 0 even for
bad signatures. (PGP only)
-199. pgp_ignore_subkeys
+200. pgp_ignore_subkeys
Type: boolean
Instead, the principal key will inherit the subkeys' capabilities. Unset
this if you want to play interesting key selection games. (PGP only)
-200. pgp_import_command
+201. pgp_import_command
Type: string
This command is used to import a key from a message into the user's public
key ring. (PGP only)
-201. pgp_list_pubring_command
+202. pgp_list_pubring_command
Type: string
This format is also generated by the pgpring utility which comes with
Mutt-ng. (PGP only)
-202. pgp_list_secring_command
+203. pgp_list_secring_command
Type: string
This format is also generated by the pgpring utility which comes with
Mutt-ng. (PGP only)
-203. pgp_long_ids
+204. pgp_long_ids
Type: boolean
If set, use 64 bit PGP key IDs. Unset uses the normal 32 bit Key IDs. (PGP
only)
-204. pgp_mime_auto
+205. pgp_mime_auto
Type: quadoption
Also note that using the old-style PGP message format is strongly
deprecated. (PGP only)
-205. pgp_replyinline
+206. pgp_replyinline
Type: boolean
Also note that using the old-style PGP message format is strongly
deprecated. (PGP only)
-206. pgp_retainable_sigs
+207. pgp_retainable_sigs
Type: boolean
where the outer layer (multipart/encrypted) can be easily removed, while
the inner multipart/signed part is retained. (PGP only)
-207. pgp_show_unusable
+208. pgp_show_unusable
Type: boolean
menu. This includes keys which have been revoked, have expired, or have
been marked as ``disabled'' by the user. (PGP only)
-208. pgp_sign_as
+209. pgp_sign_as
Type: string
which of your private keys to use. It is recommended that you use the
keyid form to specify your key (e.g., ``0x00112233''). (PGP only)
-209. pgp_sign_command
+210. pgp_sign_command
Type: string
This command is used to create the detached PGP signature for a
multipart/signed PGP/MIME body part. (PGP only)
-210. pgp_sort_keys
+211. pgp_sort_keys
Type: sort order
If you prefer reverse order of the above values, prefix it with
``reverse-''. (PGP only)
-211. pgp_strict_enc
+212. pgp_strict_enc
Type: boolean
problems with non-verifyable PGP signatures, so only change this if you
know what you are doing. (PGP only)
-212. pgp_timeout
+213. pgp_timeout
Type: number
The number of seconds after which a cached passphrase will expire if not
used. Default: 300. (PGP only)
-213. pgp_use_gpg_agent
+214. pgp_use_gpg_agent
Type: boolean
If set, Mutt-ng will use a possibly-running gpg-agent process. (PGP only)
-214. pgp_verify_command
+215. pgp_verify_command
Type: string
This command is used to verify PGP signatures. (PGP only)
-215. pgp_verify_key_command
+216. pgp_verify_key_command
Type: string
This command is used to verify key information from the key selection
menu. (PGP only)
-216. pipe_decode
+217. pipe_decode
Type: boolean
pipe the messages without any preprocessing. When set, Mutt-ng will weed
headers and will attempt to PGP/MIME decode the messages first.
-217. pipe_sep
+218. pipe_sep
Type: string
The separator to add between messages when piping a list of tagged
messages to an external Unix command.
-218. pipe_split
+219. pipe_split
Type: boolean
by one. In both cases the messages are piped in the current sorted order,
and the ``$pipe_sep'' separator is added after each message.
-219. pop_auth_try_all
+220. pop_auth_try_all
Type: boolean
unavailable. If a method is available but authentication fails, Mutt-ng
will not connect to the POP server.
-220. pop_authenticators
+221. pop_authenticators
Type: string
Example: set pop_authenticators="digest-md5:apop:user"
-221. pop_delete
+222. pop_delete
Type: quadoption
server when using the ``fetch-mail'' function. When unset, Mutt-ng will
download messages but also leave them on the POP server.
-222. pop_host
+223. pop_host
Type: string
since the superuser of your machine may read it regardless of the file's
permissions.
-223. pop_last
+224. pop_last
Type: boolean
for retrieving only unread messages from the POP server when using the
``fetch-mail'' function.
-224. pop_mail_check
+225. pop_mail_check
Type: number
This variable configures how often (in seconds) POP should look for new
mail.
-225. pop_pass
+226. pop_pass
Type: string
since the superuser of your machine may read it regardless of the file's
permissions.
-226. pop_reconnect
+227. pop_reconnect
Type: quadoption
Controls whether or not Mutt-ng will try to reconnect to a POP server when
the connection is lost.
-227. pop_user
+228. pop_user
Type: string
This variable defaults to your user name on the local machine.
-228. post_indent_string
+229. post_indent_string
Type: string
Similar to the ``$attribution'' variable, Mutt-ng will append this string
after the inclusion of a message which is being replied to.
-229. postpone
+230. postpone
Type: quadoption
Controls whether or not messages are saved in the ``$postponed'' mailbox
when you elect not to send immediately.
-230. postponed
+231. postponed
Type: path
in the mailbox specified by this variable. Also see the ``$postpone''
variable.
-231. preconnect
+232. preconnect
Type: string
Note: For this example to work, you must be able to log in to the remote
machine without having to enter a password.
-232. print
+233. print
Type: quadoption
Controls whether or not Mutt-ng really prints messages. This is set to
ask-no by default, because some people accidentally hit ``p'' often.
-233. print_command
+234. print_command
Type: path
This specifies the command pipe that should be used to print messages.
-234. print_decode
+235. print_decode
Type: boolean
useful if you are using some advanced printer filter which is able to
properly format e-mail messages for printing.
-235. print_split
+236. print_split
Type: boolean
Those who use the enscript(1) program's mail-printing mode will most
likely want to set this option.
-236. prompt_after
+237. prompt_after
Type: boolean
returning to the index menu. If unset, Mutt-ng will return to the index
menu when the external pager exits.
-237. query_command
+238. query_command
Type: path
queries. The string should contain a %s, which will be substituted with
the query string the user types. See ``query'' for more information.
-238. quit
+239. quit
Type: quadoption
effect, and if it is set to ask-yes or ask-no, you are prompted for
confirmation when you try to quit.
-239. quote_empty
+240. quote_empty
Type: boolean
Controls whether or not empty lines will be quoted using
``indent_string''.
-240. quote_quoted
+241. quote_quoted
Type: boolean
be added to the end of existing prefix. Otherwise, quoted lines will be
prepended by ``indent_string''.
-241. quote_regexp
+242. quote_regexp
Type: regular expression
to set this to a regular expression that matches exactly the quote
characters at the beginning of quoted lines.
-242. read_inc
+243. read_inc
Type: number
Also see the ``$write_inc'' variable.
-243. read_only
+244. read_only
Type: boolean
If set, all folders are opened in read-only mode.
-244. realname
+245. realname
Type: string
Note: This variable will not be used when the user has set a real name in
the $from variable.
-245. recall
+246. recall
Type: quadoption
Setting this variable to yes is not generally useful, and thus not
recommended.
-246. record
+247. record
Type: path
The value of $record is overridden by the ``$force_name'' and
``$save_name'' variables, and the ``fcc-hook'' command.
-247. reply_regexp
+248. reply_regexp
Type: regular expression
replying. The default value corresponds to the English ``Re:'' and the
German ``Aw:''.
-248. reply_self
+249. reply_self
Type: boolean
assume that you want to reply to the recipients of that message rather
than to yourself.
-249. reply_to
+250. reply_to
Type: quadoption
``Reply-To:'' header field to the list address and you want to send a
private message to the author of a message.
-250. resolve
+251. resolve
Type: boolean
undeleted) message whenever a command that modifies the current message is
executed.
-251. reverse_alias
+252. reverse_alias
Type: boolean
``abd30425@somewhere.net.'' This is useful when the person's e-mail
address is not human friendly (like CompuServe addresses).
-252. reverse_name
+253. reverse_name
Type: boolean
is unset, or the address that would be used doesn't match your alternates,
the From: line will use your address on the current machine.
-253. reverse_realname
+254. reverse_realname
Type: boolean
possibly including eventual real names. When it is unset, Mutt-ng will
override any such real names with the setting of the realname variable.
-254. rfc2047_parameters
+255. rfc2047_parameters
Type: boolean
Mutt-ng generates this kind of encoding. Instead, Mutt-ng will
unconditionally use the encoding specified in RFC 2231.
-255. save_address
+256. save_address
Type: boolean
default folder for saving a mail. If ``$save_name'' or ``$force_name'' is
set too, the selection of the fcc folder will be changed as well.
-256. save_empty
+257. save_empty
Type: boolean
Note: This only applies to mbox and MMDF folders, Mutt-ng does not delete
MH and Maildir directories.
-257. save_name
+258. save_name
Type: boolean
Also see the ``$force_name'' variable.
-258. score
+259. score
Type: boolean
selectively disable scoring for certain folders when the
``$score_threshold_delete'' variable and friends are used.
-259. score_threshold_delete
+260. score_threshold_delete
Type: number
Mutt-ng scores are always greater than or equal to zero, the default
setting of this variable will never mark a message for deletion.
-260. score_threshold_flag
+261. score_threshold_flag
Type: number
Messages which have been assigned a score greater than or equal to this
variable's value are automatically marked ``flagged''.
-261. score_threshold_read
+262. score_threshold_read
Type: number
Mutt-ng scores are always greater than or equal to zero, the default
setting of this variable will never mark a message read.
-262. send_charset
+263. send_charset
Type: string
character set (such as iso-8859-2, koi8-r or iso-2022-jp) either instead
of or after iso-8859-1.
-263. sendmail
+264. sendmail
Type: path
Mutt-ng expects that the specified program interprets additional arguments
as recipient addresses.
-264. sendmail_wait
+265. sendmail_wait
Type: number
process will be put in a temporary file. If there is some error, you will
be informed as to where to find the output.
-265. shell
+266. shell
Type: path
Command to use when spawning a subshell. By default, the user's login
shell from /etc/passwd is used.
-266. sidebar_boundary
+267. sidebar_boundary
Type: string
variable specifies the characters at which to split a folder name into
``hierarchy items.''
-267. sidebar_delim
+268. sidebar_delim
Type: string
This specifies the delimiter between the sidebar (if visible) and other
screens.
-268. sidebar_newmail_only
+269. sidebar_newmail_only
Type: boolean
If set, only folders with new mail will be shown in the sidebar.
-269. sidebar_number_format
+270. sidebar_number_format
Type: string
1) These expandos only have a non-zero value for the current mailbox and
will always be zero otherwise.
-270. sidebar_shorten_hierarchy
+271. sidebar_shorten_hierarchy
Type: boolean
At which characters this compression is done is controled via the
$sidebar_boundary variable.
-271. sidebar_visible
+272. sidebar_visible
Type: boolean
This specifies whether or not to show the sidebar (a list of folders
specified with the ``mailboxes'' command).
-272. sidebar_width
+273. sidebar_width
Type: number
The width of the sidebar.
-273. sig_dashes
+274. sig_dashes
Type: boolean
For example, Mutt-ng has the ability to highlight the signature in a
different color in the builtin pager.
-274. sig_on_top
+275. sig_on_top
Type: boolean
you really know what you are doing, and are prepared to take some heat
from netiquette guardians.
-275. signature
+276. signature
Type: path
outgoing messages. If the filename ends with a pipe (``|''), it is assumed
that filename is a shell command and input should be read from its stdout.
-276. signoff_string
+277. signoff_string
Type: string
or witty quotes into your mails, better use a signature file instead of
the signoff string.
-277. simple_search
+278. simple_search
Type: string
˜f joe | ˜s joe
-278. sleep_time
+279. sleep_time
Type: number
expunging messages from the current folder. The default is to pause one
second, so a value of zero for this option suppresses the pause.
-279. smart_wrap
+280. smart_wrap
Type: boolean
pager. If set, long lines are wrapped at a word boundary. If unset, lines
are simply wrapped at the screen edge. Also see the ``$markers'' variable.
-280. smileys
+281. smileys
Type: regular expression
The pager uses this variable to catch some common false positives of
``$quote_regexp'', most notably smileys in the beginning of a line
-281. smime_ask_cert_label
+282. smime_ask_cert_label
Type: boolean
certificate about to be added to the database or not. It is set by
default. (S/MIME only)
-282. smime_ca_location
+283. smime_ca_location
Type: path
This variable contains the name of either a directory, or a file which
contains trusted certificates for use with OpenSSL. (S/MIME only)
-283. smime_certificates
+284. smime_certificates
Type: path
contains mailbox-address keyid pairs, and which can be manually edited.
This one points to the location of the certificates. (S/MIME only)
-284. smime_decrypt_command
+285. smime_decrypt_command
Type: string
samples/ subdirectory which has been installed on your system alongside
the documentation. (S/MIME only)
-285. smime_decrypt_use_default_key
+286. smime_decrypt_use_default_key
Type: boolean
use the mailbox-address to determine the key to use. It will ask you to
supply a key, if it can't find one. (S/MIME only)
-286. smime_default_key
+287. smime_default_key
Type: string
keyid (the hash-value that OpenSSL generates) to work properly (S/MIME
only)
-287. smime_encrypt_command
+288. smime_encrypt_command
Type: string
This command is used to create encrypted S/MIME messages. (S/MIME only)
-288. smime_encrypt_with
+289. smime_encrypt_with
Type: string
If unset ``3des'' (TripleDES) is used. (S/MIME only)
-289. smime_get_cert_command
+290. smime_get_cert_command
Type: string
This command is used to extract X509 certificates from a PKCS7 structure.
(S/MIME only)
-290. smime_get_cert_email_command
+291. smime_get_cert_email_command
Type: string
certificates, and for verification purposes (to check whether the
certificate was issued for the sender's mailbox). (S/MIME only)
-291. smime_get_signer_cert_command
+292. smime_get_signer_cert_command
Type: string
S/MIME signature, so that the certificate's owner may get compared to the
email's ``From:'' header field. (S/MIME only)
-292. smime_import_cert_command
+293. smime_import_cert_command
Type: string
This command is used to import a certificate via smime_keysng. (S/MIME
only)
-293. smime_is_default
+294. smime_is_default
Type: boolean
(Note that this variable can be overridden by unsetting $crypt_autosmime.)
(S/MIME only)
-294. smime_keys
+295. smime_keys
Type: path
which contains mailbox-address keyid pair, and which can be manually
edited. This one points to the location of the private keys. (S/MIME only)
-295. smime_pk7out_command
+296. smime_pk7out_command
Type: string
This command is used to extract PKCS7 structures of S/MIME signatures, in
order to extract the public X509 certificate(s). (S/MIME only)
-296. smime_sign_command
+297. smime_sign_command
Type: string
This command is used to created S/MIME signatures of type
multipart/signed, which can be read by all mail clients. (S/MIME only)
-297. smime_sign_opaque_command
+298. smime_sign_opaque_command
Type: string
application/x-pkcs7-signature, which can only be handled by mail clients
supporting the S/MIME extension. (S/MIME only)
-298. smime_timeout
+299. smime_timeout
Type: number
The number of seconds after which a cached passphrase will expire if not
used. (S/MIME only)
-299. smime_verify_command
+300. smime_verify_command
Type: string
This command is used to verify S/MIME signatures of type multipart/signed.
(S/MIME only)
-300. smime_verify_opaque_command
+301. smime_verify_opaque_command
Type: string
This command is used to verify S/MIME signatures of type
application/x-pkcs7-mime. (S/MIME only)
-301. smtp_envelope
+302. smtp_envelope
Type: string
as the envelope sender but only a particular one which may not be the same
as the user's desired From: header.
-302. smtp_host
+303. smtp_host
Type: string
invoking the sendmail binary. Setting this variable overrides the value of
``$sendmail'', and any associated variables.
-303. smtp_pass
+304. smtp_pass
Type: string
since the superuser of your machine may read it regardless of the file's
permissions.
-304. smtp_port
+305. smtp_port
Type: number
Defaults to 25, the standard SMTP port, but RFC 2476-compliant SMTP
servers will probably desire 587, the mail submission port.
-305. smtp_use_tls
+306. smtp_use_tls
Type: string
to start TLS and continue without TLS in case of an error. Muttng still
needs to have SSL support enabled in order to use it.
-306. smtp_user
+307. smtp_user
Type: string
Defines the username to use with SMTP AUTH. Setting this variable will
cause Mutt-ng to attempt to use SMTP AUTH when sending.
-307. sort
+308. sort
Type: sort order
You may optionally use the ``reverse-'' prefix to specify reverse sorting
order (example: set sort=reverse-date-sent).
-308. sort_alias
+309. sort_alias
Type: sort order
unsorted (leave in order specified in .muttrc)
-309. sort_aux
+310. sort_aux
Type: sort order
not the right thing to do, but kept to not break any existing
configuration setting).
-310. sort_browser
+311. sort_browser
Type: sort order
You may optionally use the ``reverse-'' prefix to specify reverse sorting
order (example: set sort_browser=reverse-date).
-311. sort_re
+312. sort_re
Type: boolean
whether or not this is the case, as long as the non-``$reply_regexp''
parts of both messages are identical.
-312. spam_separator
+313. spam_separator
Type: string
matches value for the spam label. If set, each successive match will
append to the previous, using ``spam_separator'' as a separator.
-313. spoolfile
+314. spoolfile
Type: path
automatically set this variable to the value of the environment variable
$MAIL if it is not set.
-314. ssl_ca_certificates_file
+315. ssl_ca_certificates_file
Type: path
Example: set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt
-315. ssl_client_cert
+316. ssl_client_cert
Type: path
The file containing a client certificate and its associated private key.
-316. ssl_force_tls
+317. ssl_force_tls
Type: boolean
otherwise have to abort the connection anyway. This option supersedes
``$ssl_starttls''.
-317. ssl_min_dh_prime_bits
+318. ssl_min_dh_prime_bits
Type: number
use in any Diffie-Hellman key exchange. A value of 0 will use the default
from the GNUTLS library.
-318. ssl_starttls
+319. ssl_starttls
Type: quadoption
advertising the capability. When unset, Mutt-ng will not attempt to use
STARTTLS regardless of the server's capabilities.
-319. ssl_use_sslv2
+320. ssl_use_sslv2
Type: boolean
This variables specifies whether to attempt to use SSLv2 in the SSL
authentication process.
-320. ssl_use_sslv3
+321. ssl_use_sslv3
Type: boolean
This variables specifies whether to attempt to use SSLv3 in the SSL
authentication process.
-321. ssl_use_tlsv1
+322. ssl_use_tlsv1
Type: boolean
This variables specifies whether to attempt to use TLSv1 in the SSL
authentication process.
-322. ssl_usesystemcerts
+323. ssl_usesystemcerts
Type: boolean
certificate store when checking if server certificate is signed by a
trusted CA.
-323. status_chars
+324. status_chars
Type: string
(Certain operations like composing a new mail, replying, forwarding, etc.
are not permitted in this mode).
-324. status_format
+325. status_format
Type: string
will replace any dots in the expansion by underscores. This might be
helpful with IMAP folders that don't like dots in folder names.
-325. status_on_top
+326. status_on_top
Type: boolean
Setting this variable causes the ``status bar'' to be displayed on the
first line of the screen rather than near the bottom.
-326. strict_mailto
+327. strict_mailto
Type: boolean
``X-Mailto-'' and the message including headers will be shown in the
editor regardless of what ``$edit_headers'' is set to.
-327. strict_mime
+328. strict_mime
Type: boolean
*text to a single space to prevent the display of MIME-encoded
``Subject:'' header field from being devided into multiple lines.
-328. strict_threads
+329. strict_threads
Type: boolean
default, messages with the same subject are grouped together in ``pseudo
threads.'' This may not always be desirable, such as in a personal mailbox
where you might have several unrelated messages with the subject ``hi''
- which will get grouped together.
+ which will get grouped together. See also ``$sort_re'' for a less drastic
+ way of controlling this behaviour.
-329. strip_was
+330. strip_was
Type: boolean
which matches $strip_was_regex when replying. This is useful to properly
react on subject changes and reduce ``subject noise.'' (esp. in Usenet)
-330. strip_was_regex
+331. strip_was_regex
Type: regular expression
part of the ``Subject'' line when replying if it won't be empty
afterwards.
-331. stuff_quoted
+332. stuff_quoted
Type: boolean
``stuffed'', i.e. a space will be inserted between the quote characters
and the actual text.
-332. suspend
+333. suspend
Type: boolean
key, usually CTRL+Z. This is useful if you run Mutt-ng inside an xterm
using a command like ``xterm -e muttng.''
-333. text_flowed
+334. text_flowed
Type: boolean
Note that $indent_string is ignored when this option is set.
-334. thorough_search
+335. thorough_search
Type: boolean
searched are decoded before searching. If unset, messages are searched as
they appear in the folder.
-335. thread_received
+336. thread_received
Type: boolean
When set, Mutt-ng uses the date received rather than the date sent to
thread messages by subject.
-336. tilde
+337. tilde
Type: boolean
When set, the internal-pager will pad blank lines to the bottom of the
screen with a tilde (˜).
-337. timeout
+338. timeout
Type: number
to be pressed in the main menu before timing out and checking for new
mail. A value of zero or less will cause Mutt-ng to never time out.
-338. tmpdir
+339. tmpdir
Type: path
not set, the environment variable $TMPDIR is used. If $TMPDIR is not set
then "/tmp" is used.
-339. to_chars
+340. to_chars
Type: string
character is used to indicate when a mail was sent to a mailing-list
you're subscribe to (default: L).
-340. trash
+341. trash
Type: path
Note: When you delete a message in the trash folder, it is really deleted,
so that there is no way to recover mail.
-341. tunnel
+342. tunnel
Type: string
Note: For this example to work you must be able to log in to the remote
machine without having to enter a password.
-342. umask
+343. umask
Type: number
This sets the umask that will be used by Mutt-ng when creating all kinds
of files. If unset, the default value is 077.
-343. uncollapse_jump
+344. uncollapse_jump
Type: boolean
When set, Mutt-ng will jump to the next unread message, if any, when the
current thread is uncollapsed.
-344. use_8bitmime
+345. use_8bitmime
Type: boolean
flag when sending 8-bit messages to enable ESMTP negotiation or tell
libESMTP to do so.
-345. use_domain
+346. use_domain
Type: boolean
portion) with the value of ``$hostname''. If unset, no addresses will be
qualified.
-346. use_from
+347. use_from
Type: boolean
messages. If unset, no ``From:'' header field will be generated unless the
user explicitly sets one using the ``my_hdr'' command.
-347. use_idn
+348. use_idn
Type: boolean
Note: You can use IDNs for addresses even if this is unset. This variable
only affects decoding.
-348. use_ipv6
+349. use_ipv6
Type: boolean
contact. If this option is unset, Mutt-ng will restrict itself to IPv4
addresses. Normally, the default should work.
-349. visual
+350. visual
Type: path
Specifies the visual editor to invoke when the ˜v command is given in the
builtin editor.
-350. wait_key
+351. wait_key
Type: boolean
When set, Mutt-ng will always ask for a key. When unset, Mutt-ng will wait
for a key only if the external command returned a non-zero status.
-351. weed
+352. weed
Type: boolean
When set, Mutt-ng will weed headers when displaying, forwarding, printing,
or replying to messages.
-352. wrap_search
+353. wrap_search
Type: boolean
When set, searches will wrap around the first (or last) message. When
unset, searches will not wrap.
-353. wrapmargin
+354. wrapmargin
Type: number
Controls the size of the margin remaining at the right side of the
terminal when Mutt-ng's pager does smart wrapping.
-354. write_bcc
+355. write_bcc
Type: boolean
Controls whether Mutt-ng writes out the Bcc header when preparing messages
to be sent. Exim users may wish to unset this.
-355. write_inc
+356. write_inc
Type: number
Also see the ``$read_inc'' variable.
-356. xterm_icon
+357. xterm_icon
Type: string
set. This string is identical in formatting to the one used by
``$status_format''.
-357. xterm_leave
+358. xterm_leave
Type: string
set xterm_leave = "`test x$DISPLAY != x && xprop -id $WINDOWID | grep
WM_NAME | cut -d '"' -f 2`"
-358. xterm_set_titles
+359. xterm_set_titles
Type: boolean
as you're in an appropriate terminal). The default must be unset to force
in the validity checking.
-359. xterm_title
+360. xterm_title
Type: string
settings for this menu will affect the default bindings for all menus
(except as noted).
- bottom-page L move to the bottom of the page
- current-bottom not bound move current entry to bottom of page
- current-middle not bound move current entry to middle of page
- current-top not bound move current entry to top of page
- enter-command : enter a muttngrc command
- exit q exit this menu
- first-entry = move to the first entry
- half-down ] scroll down 1/2 page
- half-up [ scroll up 1/2 page
- help ? this screen
- jump number jump to an index number
- last-entry * move to the last entry
- middle-page M move to the middle of the page
- next-entry j move to the next entry
- next-line > scroll down one line
- next-page z move to the next page
- previous-entry k move to the previous entry
- previous-line < scroll up one line
- previous-page Z move to the previous page
- refresh ^L clear and redraw the screen
- search / search for a regular expression
- search-next n search for next match
- search-opposite not bound search for next match in opposite direction
- search-reverse ESC / search backwards for a regular expression
- select-entry RET select the current entry
- shell-escape ! run a program in a subshell
- tag-entry t toggle the tag on the current entry
- tag-prefix ; apply next command to tagged entries
- tag-prefix-cond not bound apply next function ONLY to tagged messages
- top-page H move to the top of the page
- what-key not bound display the keycode for a key press
+ bottom-page L move to the bottom of the page
+ current-bottom not bound move current entry to bottom of page
+ current-middle not bound move current entry to middle of page
+ current-top not bound move current entry to top of page
+ enter-command : enter a muttngrc command
+ exit q exit this menu
+ first-entry = move to the first entry
+ half-down ] scroll down 1/2 page
+ half-up [ scroll up 1/2 page
+ help ? this screen
+ jump number jump to an index number
+ last-entry * move to the last entry
+ middle-page M move to the middle of the page
+ next-entry j move to the next entry
+ next-line > scroll down one line
+ next-page z move to the next page
+ previous-entry k move to the previous entry
+ previous-line < scroll up one line
+ previous-page Z move to the previous page
+ refresh ^L clear and redraw the screen
+ search / search for a regular expression
+ search-next n search for next match
+ search-opposite not bound search for next match in opposite
+ direction
+ search-reverse ESC / search backwards for a regular
+ expression
+ select-entry RET select the current entry
+ shell-escape ! run a program in a subshell
+ tag-entry t toggle the tag on the current entry
+ tag-prefix ; apply next command to tagged entries
+ tag-prefix-cond not bound apply next function ONLY to tagged
+ messages
+ top-page H move to the top of the page
+ what-key not bound display the keycode for a key press
+
5.2. index
- bounce-message b remail a message to another user
- change-folder c open a different folder
- change-folder-readonly ESC c open a different folder in read only mode
- check-traditional-pgp ESC P check for classic pgp
- clear-flag W clear a status flag from a message
- copy-message C copy a message to a file/mailbox
- create-alias a create an alias from a message sender
- decode-copy ESC C decode a message and copy it to a file/mailbox
- decode-save ESC s decode a message and save it to a file/mailbox
- delete-message d delete the current entry
- delete-pattern D delete messages matching a pattern
- delete-subthread ESC d delete all messages in subthread
- delete-thread ^D delete all messages in thread
- display-address @ display full address of sender
- display-toggle-weed h display message and toggle header weeding
- display-message RET display a message
- edit e edit the current message
- edit-type ^E edit the current message's Content-Type
- exit x exit without saving changes
- extract-keys ^K extract PGP public keys
- fetch-mail G retrieve mail from POP server
- flag-message F toggle a message's 'important' flag
- forget-passphrase ^F wipe PGP passphrase from memory
- forward-message f forward a message with comments
- group-reply g reply to all recipients
- limit l show only messages matching a pattern
- list-reply L reply to specified mailing list
- mail m compose a new mail message
- mail-key ESC k mail a PGP public key
- next-new TAB jump to the next new message
- next-subthread ESC n jump to the next subthread
- next-thread ^N jump to the next thread
- next-undeleted j move to the next undeleted message
- next-unread not bound jump to the next unread message
- parent-message P jump to parent message in thread
- pipe-message | pipe message/attachment to a shell command
- previous-new ESC TAB jump to the previous new message
- previous-page Z move to the previous page
- previous-subthread ESC p jump to previous subthread
- previous-thread ^P jump to previous thread
- previous-undeleted k move to the last undelete message
- previous-unread not bound jump to the previous unread message
- print-message p print the current entry
- query Q query external program for addresses
- quit q save changes to mailbox and quit
- read-subthread ESC r mark the current subthread as read
- read-thread ^R mark the current thread as read
- recall-message R recall a postponed message
- reply r reply to a message
- resend-message ESC e resend message and preserve MIME structure
- save-message s save message/attachment to a file
- set-flag w set a status flag on a message
- show-version V show the Mutt-ng version number and date
- show-limit ESC l show currently active limit pattern, if any
- sort-mailbox o sort messages
- sort-reverse O sort messages in reverse order
- sync-mailbox $ save changes to mailbox
- tag-pattern T tag messages matching a pattern
- tag-thread ESC t tag/untag all messages in the current thread
- toggle-new N toggle a message's 'new' flag
- toggle-write % toggle whether the mailbox will be rewritten
- undelete-message u undelete the current entry
- undelete-pattern U undelete messages matching a pattern
- undelete-subthread ESC u undelete all messages in subthread
- undelete-thread ^U undelete all messages in thread
- untag-pattern ^T untag messages matching a pattern
- view-attachments v show MIME attachments
+ bounce-message b remail a message to another user
+ change-folder c open a different folder
+ change-folder-readonly ESC c open a different folder in read only
+ mode
+ check-traditional-pgp ESC P check for classic pgp
+ clear-flag W clear a status flag from a message
+ copy-message C copy a message to a file/mailbox
+ create-alias a create an alias from a message
+ senderdecode-copy ESC C decode a message and copy it
+ to a file/mailbox
+ decode-save ESC s decode a message and save it to a
+ file/mailbox
+ delete-message d delete the current entry
+ delete-pattern D delete messages matching a pattern
+ delete-subthread ESC d delete all messages in subthread
+ delete-thread ^D delete all messages in thread
+ display-address @ display full address of sender
+ display-toggle-weed h display message and toggle header
+ weeding
+ display-message RET display a message
+ edit e edit the current message
+ edit-type ^E edit the current message's
+ Content-Type
+ exit x exit without saving changes
+ extract-keys ^K extract PGP public keys
+ fetch-mail G retrieve mail from POP server
+ flag-message F toggle a message's 'important' flag
+ forget-passphrase ^F wipe PGP passphrase from memory
+ forward-message f forward a message with comments
+ group-reply g reply to all recipients
+ limit l show only messages matching a
+ patternlist-reply L reply to specified mailing
+ list
+ mail m compose a new mail message
+ mail-key ESC k mail a PGP public key
+ next-new not bound jump to the next new message
+ next-new-then-unread TAB jump to the next new or unread message
+ next-subthread ESC n jump to the next subthread
+ next-thread ^N jump to the next thread
+ next-undeleted j move to the next undeleted message
+ next-unread not bound jump to the next unread message
+ parent-message P jump to parent message in thread
+ pipe-message | pipe message/attachment to a shell
+ command
+ previous-new not bound jump to the previous new message
+ previous-new-then-unread
+ ESC TAB jump to the previous new or unread message
+
+ previous-page Z move to the previous page
+ previous-subthread ESC p jump to previous subthread
+ previous-thread ^P jump to previous thread
+ previous-undeleted k move to the last undelete message
+ previous-unread not bound jump to the previous unread message
+ print-message p print the current entry
+ query Q query external program for addresses
+ quit q save changes to mailbox and quit
+ read-subthread ESC r mark the current subthread as read
+ read-thread ^R mark the current thread as read
+ recall-message R recall a postponed message
+ reply r reply to a message
+ resend-message ESC e resend message and preserve MIME
+ structure
+ save-message s save message/attachment to a file
+ set-flag w set a status flag on a message
+ show-version V show the Mutt-ng version number and
+ date
+ show-limit ESC l show currently active limit pattern,
+ if any
+ sort-mailbox o sort messages
+ sort-reverse O sort messages in reverse order
+ sync-mailbox $ save changes to mailbox
+ tag-pattern T tag messages matching a pattern
+ tag-thread ESC t tag/untag all messages in the
+ current thread
+ toggle-new N toggle a message's 'new' flag
+ toggle-write % toggle whether the mailbox will be
+ rewritten
+ undelete-message u undelete the current entry
+ undelete-pattern U undelete messages matching a pattern
+ undelete-subthread ESC u undelete all messages in subthread
+ undelete-thread ^U undelete all messages in thread
+ untag-pattern ^T untag messages matching a pattern
+ view-attachments v show MIME attachments
+
5.3. pager
- bottom not bound jump to the bottom of the message
- bounce-message b remail a message to another user
- change-folder c open a different folder
- change-folder-readonly ESC c open a different folder in read only mode
- check-traditional-pgp ESC P check for classic pgp
- copy-message C copy a message to a file/mailbox
- create-alias a create an alias from a message sender
- decode-copy ESC C decode a message and copy it to a file/mailbox
- decode-save ESC s decode a message and save it to a file/mailbox
- delete-message d delete the current entry
- delete-subthread ESC d delete all messages in subthread
- delete-thread ^D delete all messages in thread
- display-address @ display full address of sender
- display-toggle-weed h display message and toggle header weeding
- edit e edit the current message
- edit-type ^E edit the current message's Content-Type
- enter-command : enter a muttngrc command
- exit i return to the main-menu
- extract-keys ^K extract PGP public keys
- flag-message F toggle a message's 'important' flag
- forget-passphrase ^F wipe PGP passphrase from memory
- forward-message f forward a message with comments
- group-reply g reply to all recipients
- half-up not bound move up one-half page
- half-down not bound move down one-half page
- help ? this screen
- list-reply L reply to specified mailing list
- mail m compose a new mail message
- mail-key ESC k mail a PGP public key
- mark-as-new N toggle a message's 'new' flag
- next-line RET scroll down one line
- next-entry J move to the next entry
- next-new TAB jump to the next new message
- next-page move to the next page
- next-subthread ESC n jump to the next subthread
- next-thread ^N jump to the next thread
- next-undeleted j move to the next undeleted message
- next-unread not bound jump to the next unread message
- parent-message P jump to parent message in thread
- pipe-message | pipe message/attachment to a shell command
- previous-line BackSpace scroll up one line
- previous-entry K move to the previous entry
- previous-new not bound jump to the previous new message
- previous-page - move to the previous page
- previous-subthread ESC p jump to previous subthread
- previous-thread ^P jump to previous thread
- previous-undeleted k move to the last undelete message
- previous-unread not bound jump to the previous unread message
- print-message p print the current entry
- quit Q save changes to mailbox and quit
- read-subthread ESC r mark the current subthread as read
- read-thread ^R mark the current thread as read
- recall-message R recall a postponed message
- redraw-screen ^L clear and redraw the screen
- reply r reply to a message
- save-message s save message/attachment to a file
- search / search for a regular expression
- search-next n search for next match
- search-opposite not bound search for next match in opposite direction
- search-reverse ESC / search backwards for a regular expression
- search-toggle \ toggle search pattern coloring
- shell-escape ! invoke a command in a subshell
- show-version V show the Mutt-ng version number and date
- skip-quoted S skip beyond quoted text
- sync-mailbox $ save changes to mailbox
- tag-message t tag a message
- toggle-quoted T toggle display of quoted text
- top ^ jump to the top of the message
- undelete-message u undelete the current entry
- undelete-subthread ESC u undelete all messages in subthread
- undelete-thread ^U undelete all messages in thread
- view-attachments v show MIME attachments
+ bottom not bound jump to the bottom of the message
+ bounce-message b remail a message to another user
+ change-folder c open a different folder
+ change-folder-readonly ESC c open a different folder in read only
+ mode
+ check-traditional-pgp ESC P check for classic pgp
+ copy-message C copy a message to a file/mailbox
+ create-alias a create an alias from a message
+ senderdecode-copy ESC C decode a message and copy it
+ to a file/mailbox
+ decode-save ESC s decode a message and save it to a
+ file/mailbox
+ delete-message d delete the current entry
+ delete-subthread ESC d delete all messages in subthread
+ delete-thread ^D delete all messages in thread
+ display-address @ display full address of sender
+ display-toggle-weed h display message and toggle header
+ weeding
+ edit e edit the current message
+ edit-type ^E edit the current message's
+ Content-Type
+ enter-command : enter a muttngrc command
+ exit i return to the main-menu
+ extract-keys ^K extract PGP public keys
+ flag-message F toggle a message's 'important' flag
+ forget-passphrase ^F wipe PGP passphrase from memory
+ forward-message f forward a message with comments
+ group-reply g reply to all recipients
+ half-up not bound move up one-half page
+ half-down not bound move down one-half page
+ help ? this screen
+ list-reply L reply to specified mailing list
+ mail m compose a new mail message
+ mail-key ESC k mail a PGP public key
+ mark-as-new N toggle a message's 'new' flag
+ next-line RET scroll down one line
+ next-entry J move to the next entry
+ next-new not bound jump to the next new message
+ next-new-then-unread TAB jump to the next new or unread message
+ next-page move to the next page
+ next-subthread ESC n jump to the next subthread
+ next-thread ^N jump to the next thread
+ next-undeleted j move to the next undeleted message
+ next-unread not bound jump to the next unread message
+ parent-message P jump to parent message in thread
+ pipe-message | pipe message/attachment to a shell
+ command
+ previous-line BackSpace scroll up one line
+ previous-entry K move to the previous entry
+ previous-new not bound jump to the previous new message
+ previous-new-then-unread
+ not bound jump to the previous new or unread message
+ previous-page - move to the previous page
+ previous-subthread ESC p jump to previous subthread
+ previous-thread ^P jump to previous thread
+ previous-undeleted k move to the last undelete message
+ previous-unread not bound jump to the previous unread message
+ print-message p print the current entry
+ quit Q save changes to mailbox and quit
+ read-subthread ESC r mark the current subthread as read
+ read-thread ^R mark the current thread as read
+ recall-message R recall a postponed message
+ redraw-screen ^L clear and redraw the screen
+ reply r reply to a message
+ save-message s save message/attachment to a file
+ search / search for a regular expression
+ search-next n search for next match
+ search-opposite not bound search for next match in opposite
+ direction
+ search-reverse ESC / search backwards for a regular
+ expression
+ search-toggle \ toggle search pattern coloring
+ shell-escape ! invoke a command in a subshell
+ show-version V show the Mutt-ng version number and
+ date
+ skip-quoted S skip beyond quoted text
+ sync-mailbox $ save changes to mailbox
+ tag-message t tag a message
+ toggle-quoted T toggle display of quoted text
+ top ^ jump to the top of the message
+ undelete-message u undelete the current entry
+ undelete-subthread ESC u undelete all messages in subthread
+ undelete-thread ^U undelete all messages in thread
+ view-attachments v show MIME attachments
+
5.4. alias
- search / search for a regular expression
- search-next n search for next match
- search-reverse ESC / search backwards for a regular expression
+ search / search for a regular expression
+ search-next n search for next match
+ search-reverse ESC / search backwards for a regular
+ expression
+
5.5. query
- create-alias a create an alias from a message sender
- mail m compose a new mail message
- query Q query external program for addresses
- query-append A append new query results to current results
- search / search for a regular expression
- search-next n search for next match
- search-opposite not bound search for next match in opposite direction
- search-reverse ESC / search backwards for a regular expression
+ create-alias a create an alias from a message
+ sendermail m compose a new mail message
+ query Q query external program for addresses
+ query-append A append new query results to current
+ results
+ search / search for a regular expression
+ search-next n search for next match
+ search-opposite not bound search for next match in opposite
+ direction
+ search-reverse ESC / search backwards for a regular
+ expression
+
5.6. attach
- bounce-message b remail a message to another user
- collapse-parts v toggle display of subparts
- delete-entry d delete the current entry
- display-toggle-weed h display message and toggle header weeding
- edit-type ^E edit the current entry's Content-Type
- extract-keys ^K extract PGP public keys
- forward-message f forward a message with comments
- group-reply g reply to all recipients
- list-reply L reply to specified mailing list
- pipe-entry | pipe message/attachment to a shell command
- print-entry p print the current entry
- reply r reply to a message
- resend-message ESC e resend message and preserve MIME structure
- save-entry s save message/attachment to a file
- undelete-entry u undelete the current entry
- view-attach RET view attachment using mailcap entry if necessary
- view-mailcap m force viewing of attachment using mailcap
- view-text T view attachment as text
+ bounce-message b remail a message to another user
+ collapse-parts v toggle display of subparts
+ delete-entry d delete the current entry
+ display-toggle-weed h display message and toggle header
+ weeding
+ edit-type ^E edit the current entry's
+ Content-Typeextract-keys ^K extract PGP public keys
+ forward-message f forward a message with comments
+ group-reply g reply to all recipients
+ list-reply L reply to specified mailing list
+ pipe-entry | pipe message/attachment to a shell
+ command
+ print-entry p print the current entry
+ reply r reply to a message
+ resend-message ESC e resend message and preserve MIME
+ structure
+ save-entry s save message/attachment to a file
+ undelete-entry u undelete the current entry
+ view-attach RET view attachment using mailcap entry
+ if necessary
+ view-mailcap m force viewing of attachment using
+ mailcap
+ view-text T view attachment as text
+
5.7. compose
- attach-file a attach a file(s) to this message
- attach-message A attach message(s) to this message
- attach-key ESC k attach a PGP public key
- copy-file C save message/attachment to a file
- detach-file D delete the current entry
- display-toggle-weed h display message and toggle header weeding
- edit-bcc b edit the BCC list
- edit-cc c edit the CC list
- edit-description d edit attachment description
- edit-encoding ^E edit attachment transfer-encoding
- edit-fcc f enter a file to save a copy of this message in
- edit-from ESC f edit the from: field
- edit-file ^X e edit the file to be attached
- edit-headers E edit the message with headers
- edit e edit the message
- edit-mime m edit attachment using mailcap entry
- edit-reply-to r edit the Reply-To field
- edit-subject s edit the subject of this message
- edit-to t edit the TO list
- edit-type ^T edit attachment type
- filter-entry F filter attachment through a shell command
- forget-passphrase ^F wipe PGP passphrase from memory
- ispell i run ispell on the message
- new-mime n compose new attachment using mailcap entry
- pgp-menu p show PGP options
- pipe-entry | pipe message/attachment to a shell command
- postpone-message P save this message to send later
- print-entry l print the current entry
- rename-file R rename/move an attached file
- send-message y send the message
- toggle-unlink u toggle whether to delete file after sending it
- view-attach RET view attachment using mailcap entry if necessary
- write-fcc w write the message to a folder
+ attach-file a attach a file(s) to this message
+ attach-message A attach message(s) to this message
+ attach-key ESC k attach a PGP public key
+ copy-file C save message/attachment to a file
+ detach-file D delete the current entry
+ display-toggle-weed h display message and toggle header
+ weeding
+ edit-bcc b edit the BCC list
+ edit-cc c edit the CC list
+ edit-description d edit attachment description
+ edit-encoding ^E edit attachment transfer-encoding
+ edit-fcc f enter a file to save a copy of this
+ message in
+ edit-from ESC f edit the from: field
+ edit-file ^X e edit the file to be attached
+ edit-headers E edit the message with headers
+ edit e edit the message
+ edit-mime m edit attachment using mailcap entry
+ edit-reply-to r edit the Reply-To field
+ edit-subject s edit the subject of this message
+ edit-to t edit the TO list
+ edit-type ^T edit attachment type
+ filter-entry F filter attachment through a shell
+ command
+ forget-passphrase ^F wipe PGP passphrase from memory
+ ispell i run ispell on the message
+ new-mime n compose new attachment using mailcap
+ entry
+ pgp-menu p show PGP options
+ pipe-entry | pipe message/attachment to a shell
+ command
+ postpone-message P save this message to send later
+ print-entry l print the current entry
+ rename-file R rename/move an attached file
+ send-message y send the message
+ toggle-unlink u toggle whether to delete file after
+ sending it
+ view-attach RET view attachment using mailcap entry
+ if necessary
+ write-fcc w write the message to a folder
+
5.8. postpone
- delete-entry d delete the current entry
- undelete-entry u undelete the current entry
+ delete-entry d delete the current entry
+ undelete-entry u undelete the current entry
+
5.9. browser
- change-dir c change directories
- check-new TAB check mailboxes for new mail
- enter-mask m enter a file mask
- search / search for a regular expression
- search-next n search for next match
- search-reverse ESC / search backwards for a regular expression
- select-new N select a new file in this directory
- sort o sort messages
- sort-reverse O sort messages in reverse order
- toggle-mailboxes TAB toggle whether to browse mailboxes or all files
- view-file SPACE view file
- subscribe s subscribe to current mailbox (IMAP Only)
- unsubscribe u unsubscribe to current mailbox (IMAP Only)
- toggle-subscribed T toggle view all/subscribed mailboxes (IMAP Only)
+ change-dir c change directories
+ check-new TAB check mailboxes for new mail
+ enter-mask m enter a file mask
+ search / search for a regular expression
+ search-next n search for next match
+ search-reverse ESC / search backwards for a regular
+ expression
+ select-new N select a new file in this directory
+ sort o sort messages
+ sort-reverse O sort messages in reverse order
+ toggle-mailboxes TAB toggle whether to browse mailboxes
+ or all files
+ view-file SPACE view file
+ subscribe s subscribe to current mailbox (IMAP
+ Only)
+ unsubscribe u unsubscribe to current mailbox (IMAP
+ Only)
+ toggle-subscribed T toggle view all/subscribed mailboxes
+ (IMAP Only)
+
5.10. pgp
- view-name % view the key's user id
- verify-key c verify a PGP public key
+ view-name % view the key's user id
+ verify-key c verify a PGP public key
+
5.11. editor
- backspace BackSpace delete the char in front of the cursor
- backward-char ^B move the cursor one character to the left
- backward-word ESC b move the cursor to the previous word
- bol ^A jump to the beginning of the line
- buffy-cycle Space cycle among incoming mailboxes
- capitalize-word ESC c uppercase the first character in the word
- complete TAB complete filename or alias
- complete-query ^T complete address with query
- delete-char ^D delete the char under the cursor
- downcase-word ESC l lowercase all characters in current word
- eol ^E jump to the end of the line
- forward-char ^F move the cursor one character to the right
- forward-word ESC f move the cursor to the next word
- history-down not bound scroll down through the history list
- history-up not bound scroll up through the history list
- kill-eol ^K delete chars from cursor to end of line
- kill-eow ESC d delete chars from cursor to end of word
- kill-line ^U delete all chars on the line
- kill-word ^W delete the word in front of the cursor
- quote-char ^V quote the next typed key
- transpose-chars not bound transpose character under cursor with previous
- upcase-word ESC u uppercase all characters in current word
+ backspace BackSpace delete the char in front of the
+ cursor
+ backward-char ^B move the cursor one character to the
+ left
+ backward-word ESC b move the cursor to the previous word
+ bol ^A jump to the beginning of the line
+ buffy-cycle Space cycle among incoming mailboxes
+ capitalize-word ESC c uppercase the first character in the
+ word
+ complete TAB complete filename or alias
+ complete-query ^T complete address with query
+ delete-char ^D delete the char under the cursor
+ downcase-word ESC l lowercase all characters in current
+ word
+ eol ^E jump to the end of the line
+ forward-char ^F move the cursor one character to the
+ right
+ forward-word ESC f move the cursor to the next word
+ history-down not bound scroll down through the history list
+ history-up not bound scroll up through the history list
+ kill-eol ^K delete chars from cursor to end of
+ line
+ kill-eow ESC d delete chars from cursor to end of
+ word
+ kill-line ^U delete all chars on the line
+ kill-word ^W delete the word in front of the
+ cursor
+ quote-char ^V quote the next typed key
+ transpose-chars not bound transpose character under cursor
+ with previous
+ upcase-word ESC u uppercase all characters in current
+ word
+
Chapter 8. Miscellany
Kari Hurtta <kari.hurtta@fmi.fi> co-developed the original MIME >parsing
code back in the ELM-ME days.
- The following people have been very helpful to the development of Mutt:
-
- Vikas Agnihotri <vikasa@writeme.com>, Francois Berjon
- <Francois.Berjon@aar.alcatel-alsthom.fr>, Aric Blumer <aric@fore.com>,
- John Capo <jc@irbs.com>, David Champion <dgc@uchicago.edu, Brendan Cully
- <brendan@kublai.com>, Liviu Daia <daia@stoilow.imar.ro>, Thomas E. Dickey
- <dickey@herndon4.his.com>, David DeSimone <fox@convex.hp.com>, Nickolay N.
- Dudorov <nnd@wint.itfs.nsk.su>, Ruslan Ermilov <ru@freebsd.org>, Edmund
- Grimley Evans <edmundo@rano.org, Michael Finken <finken@conware.de>, Sven
- Guckes <guckes@math.fu-berlin.de>, Lars Hecking <lhecking@nmrc.ie>, Mark
- Holloman <holloman@nando.net>, Andreas Holzmann
- <holzmann@fmi.uni-passau.de>, Marco d'Itri <md@linux.it>, Björn Jacke
- <bjacke@suse.com>, Byrial Jensen <byrial@image.dk>, David Jeske
- <jeske@igcom.net>, Christophe Kalt <kalt@hugo.int-evry.fr>, Tommi
- Komulainen <Tommi.Komulainen@iki.fi>, Felix von Leitner (a.k.a ``Fefe'')
- <leitner@math.fu-berlin.de>, Brandon Long <blong@fiction.net>, Jimmy
- Mäkelä <jmy@flashback.net>, Lars Marowsky-Bree
- <lmb@pointer.in-minden.de>, Thomas ``Mike'' Michlmayr
- <mike@cosy.sbg.ac.at>, Andrew W. Nosenko <awn@bcs.zp.ua>, David O'Brien
- <obrien@Nuxi.cs.ucdavis.edu>, Clint Olsen <olsenc@ichips.intel.com>, Park
- Myeong Seok <pms@romance.kaist.ac.kr>, Thomas Parmelan
- <tom@ankh.fr.eu.org>, Ollivier Robert <roberto@keltia.freenix.fr>, Thomas
- Roessler <roessler@does-not-exist.org>, Roland Rosenfeld
- <roland@spinnaker.de>, TAKIZAWA Takashi <taki@luna.email.ne.jp>, Allain
- Thivillon <Allain.Thivillon@alma.fr> Gero Treuner
- <gero@faveve.uni-stuttgart.de>, Vsevolod Volkov <vvv@lucky.net>, Ken
- Weinert <kenw@ihs.com>
+ The following people have been very helpful to the development of Mutt
+ (sorted by surnames):
+
+ o Vikas Agnihotri <vikasa@writeme.com>
+ o Francois Berjon < Francois.Berjon@aar.alcatel-alsthom.fr>
+ o Aric Blumer <aric@fore.com>, John Capo < jc@irbs.com >
+ o David Champion <dgc@uchicago.edu>
+ o Brendan Cully <brendan@kublai.com>
+ o Liviu Daia <daia@stoilow.imar.ro>
+ o Thomas E. Dickey <dickey@herndon4.his.com>
+ o David DeSimone <fox@convex.hp.com>
+ o Nickolay N. Dudorov <nnd@wint.itfs.nsk.su>
+ o Ruslan Ermilov <ru@freebsd.org>
+ o Edmund Grimley Evans <edmundo@rano.org>
+ o Michael Finken <finken@conware.de>
+ o Sven Guckes <guckes@math.fu-berlin.de>
+ o Lars Hecking <lhecking@nmrc.ie>
+ o Mark Holloman <holloman@nando.net>
+ o Andreas Holzmann <holzmann@fmi.uni-passau.de>
+ o Marco d'Itri <md@linux.it>
+ o Björn Jacke <bjacke@suse.com>
+ o Byrial Jensen <byrial@image.dk>
+ o David Jeske <jeske@igcom.net>
+ o Christophe Kalt <kalt@hugo.int-evry.fr>
+ o Tommi Komulainen <Tommi.Komulainen@iki.fi>
+ o Felix von Leitner (a.k.a ``Fefe'') < leitner@math.fu-berlin.de >
+ o Brandon Long <blong@fiction.net>
+ o Jimmy Mäkeä <jmy@flashback.net>
+ o Lars Marowsky-Bree <lmb@pointer.in-minden.de>
+ o Thomas ``Mike'' Michlmayr <mike@cosy.sbg.ac.at>
+ o Andrew W. Nosenko <awn@bcs.zp.ua>
+ o David O'Brien <obrien@Nuxi.cs.ucdavis.edu>
+ o Clint Olsen <olsenc@ichips.intel.com>
+ o Park Myeong Seok <pms@romance.kaist.ac.kr>
+ o Thomas Parmelan <tom@ankh.fr.eu.org>
+ o Ollivier Robert <roberto@keltia.freenix.fr>
+ o Thomas Roessler <roessler@does-not-exist.org>
+ o Roland Rosenfeld <roland@spinnaker.de>
+ o TAKIZAWA Takashi <taki@luna.email.ne.jp>
+ o Allain Thivillon <Allain.Thivillon@alma.fr>
+ o Gero Treuner <gero@faveve.uni-stuttgart.de>
+ o Vsevolod Volkov <vvv@lucky.net>
+ o Ken Weinert <kenw@ihs.com>
Mutt-ng is developed by the following people:
- Andreas Krennmair <ak@synflood.at>, Nico Golde <nico@ngolde.de>, Rocco
- Rutte <pdmef@cs.tu-berlin.de>
+ o Andreas Krennmair <ak@synflood.at>
+ o Nico Golde <nico@ngolde.de>
+ o Rocco Rutte <pdmef@cs.tu-berlin.de>
- The following people have been very helpful to the development of Mutt-ng:
+ The following people have been very helpful to the development of Mutt-ng
+ (sorted by surnames):
- Christian Gall <cg@cgall.de>, Iain Lea <iain@bricbrac.de>, Andreas Kneib
- <akneib@gmx.net>, Carsten Schoelzki <cjs@weisshuhn.de>, Elimar Riesebieter
- <riesebie@lxtec.de>
+ o Christian Gall <cg@cgall.de>
+ o Iain Lea <iain@bricbrac.de>
+ o Andreas Kneib <akneib@gmx.net>
+ o Carsten Schoelzki <cjs@weisshuhn.de>
+ o Elimar Riesebieter <riesebie@lxtec.de>