- { "ssl_use_sslv2", DT_BOOL, R_NONE, OPTSSLV2, 1 },
- /*
- ** .pp
- ** Availability: SSL or NSS
- **
- ** .pp
- ** This variables specifies whether to attempt to use SSLv2 in the
- ** SSL authentication process.
- */
-# endif
- { "ssl_use_sslv3", DT_BOOL, R_NONE, OPTSSLV3, 1 },
- /*
- ** .pp
- ** Availability: SSL or NSS or GNUTLS
- **
- ** .pp
- ** This variables specifies whether to attempt to use SSLv3 in the
- ** SSL authentication process.
- */
- { "ssl_use_tlsv1", DT_BOOL, R_NONE, OPTTLSV1, 1 },
- /*
- ** .pp
- ** Availability: SSL or NSS or GNUTLS
- **
- ** .pp
- ** This variables specifies whether to attempt to use TLSv1 in the
- ** SSL authentication process.
- */
-#ifdef USE_GNUTLS
- { "ssl_min_dh_prime_bits", DT_NUM, R_NONE, UL &SslDHPrimeBits, 0 },
- /*
- ** .pp
- ** Availability: GNUTLS
- **
- ** .pp
- ** This variable specifies the minimum acceptable prime size (in bits)
- ** for use in any Diffie-Hellman key exchange. A value of 0 will use
- ** the default from the GNUTLS library.
- */
- { "ssl_ca_certificates_file", DT_PATH, R_NONE, UL &SslCACertFile, 0 },
- /*
- ** .pp
- ** This variable specifies a file containing trusted CA certificates.
- ** Any server certificate that is signed with one of these CA
- ** certificates are also automatically accepted.
- ** .pp
- ** Example: set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt
- */
-#endif
-#endif
- { "pipe_split", DT_BOOL, R_NONE, OPTPIPESPLIT, 0 },
- /*
- ** .pp
- ** Used in connection with the \fIpipe-message\fP command and the ``tag-
- ** prefix'' operator. If this variable is unset, when piping a list of
- ** tagged messages Mutt-ng will concatenate the messages and will pipe them
- ** as a single folder. When set, Mutt-ng will pipe the messages one by one.
- ** In both cases the messages are piped in the current sorted order,
- ** and the ``$$pipe_sep'' separator is added after each message.
- */
- { "pipe_decode", DT_BOOL, R_NONE, OPTPIPEDECODE, 0 },
- /*
- ** .pp
- ** Used in connection with the \fIpipe-message\fP command. When unset,
- ** Mutt-ng will pipe the messages without any preprocessing. When set, Mutt-ng
- ** will weed headers and will attempt to PGP/MIME decode the messages
- ** first.
- */
- { "pipe_sep", DT_STR, R_NONE, UL &PipeSep, UL "\n" },
- /*
- ** .pp
- ** The separator to add between messages when piping a list of tagged
- ** messages to an external Unix command.
- */
-#ifdef USE_POP
- { "pop_authenticators", DT_STR, R_NONE, UL &PopAuthenticators, UL 0 },
- /*
- ** .pp
- ** Availability: POP
- **
- ** .pp
- ** This is a colon-delimited list of authentication methods Mutt-ng may
- ** attempt to use to log in to an POP server, in the order Mutt-ng should
- ** try them. Authentication methods are either 'user', 'apop' or any
- ** SASL mechanism, eg 'digest-md5', 'gssapi' or 'cram-md5'.
- ** This parameter is case-insensitive. If this parameter is unset
- ** (the default) Mutt-ng will try all available methods, in order from
- ** most-secure to least-secure.
- ** .pp
- ** Example: set pop_authenticators="digest-md5:apop:user"
- */
- { "pop_auth_try_all", DT_BOOL, R_NONE, OPTPOPAUTHTRYALL, 1 },
- /*
- ** .pp
- ** Availability: POP
- **
- ** .pp
- ** If set, Mutt-ng will try all available methods. When unset, Mutt-ng will
- ** only fall back to other authentication methods if the previous
- ** methods are unavailable. If a method is available but authentication
- ** fails, Mutt-ng will not connect to the POP server.
- */
- { "pop_checkinterval", DT_NUM, R_NONE, UL &PopCheckTimeout, 60 },
- /*
- ** .pp
- ** Availability: POP
- **
- ** .pp
- ** This variable configures how often (in seconds) POP should look for
- ** new mail.
- */
- { "pop_delete", DT_QUAD, R_NONE, OPT_POPDELETE, M_ASKNO },
- /*
- ** .pp
- ** Availability: POP
- **
- ** .pp
- ** If set, Mutt-ng will delete successfully downloaded messages from the POP
- ** server when using the fetch-mail function. When unset, Mutt-ng will
- ** download messages but also leave them on the POP server.
- */
- { "pop_host", DT_STR, R_NONE, UL &PopHost, UL "" },
- /*
- ** .pp
- ** Availability: POP
- **
- ** .pp
- ** The name of your POP server for the fetch-mail function. You
- ** can also specify an alternative port, username and password, ie:
- ** .pp
- ** [pop[s]://][username[:password]@]popserver[:port]
- */
- { "pop_last", DT_BOOL, R_NONE, OPTPOPLAST, 0 },
- /*
- ** .pp
- ** Availability: POP
- **
- ** .pp
- ** If this variable is set, Mutt-ng will try to use the "LAST" POP command
- ** for retrieving only unread messages from the POP server when using
- ** the fetch-mail function.
- */
- { "pop_reconnect", DT_QUAD, R_NONE, OPT_POPRECONNECT, M_ASKYES },
- /*
- ** .pp
- ** Availability: POP
- **
- ** .pp
- ** Controls whether or not Mutt-ng will try to reconnect to POP server when
- ** connection lost.
- */
- { "pop_user", DT_STR, R_NONE, UL &PopUser, 0 },
- /*
- ** .pp
- ** Availability: POP
- **
- ** .pp
- ** Your login name on the POP server.
- ** .pp
- ** This variable defaults to your user name on the local machine.
- */
- { "pop_pass", DT_STR, R_NONE, UL &PopPass, UL "" },
- /*
- ** .pp
- ** Availability: POP
- **
- ** .pp
- ** Specifies the password for your POP account. If unset, Mutt-ng will
- ** prompt you for your password when you open POP mailbox.
- ** \fBWarning\fP: you should only use this option when you are on a
- ** fairly secure machine, because the superuser can read your muttngrc
- ** even if you are the only one who can read the file.
- */
-#endif /* USE_POP */
- { "post_indent_string",DT_STR, R_NONE, UL &PostIndentString, UL "" },
- /*
- ** .pp
- ** Similar to the ``$$attribution'' variable, Mutt-ng will append this
- ** string after the inclusion of a message which is being replied to.
- */
- { "post_indent_str", DT_SYN, R_NONE, UL "post_indent_string", 0 },
- /*
- */
-#ifdef USE_NNTP
- { "post_moderated", DT_QUAD, R_NONE, OPT_TOMODERATED, M_ASKYES },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** If set to \fIyes\fP, Mutt-ng will post article to newsgroup that have
- ** not permissions to posting (e.g. moderated). \fBNote:\fP if newsserver
- ** does not support posting to that newsgroup or totally read-only, that
- ** posting will not have an effect.
- */
-#endif
- { "postpone", DT_QUAD, R_NONE, OPT_POSTPONE, M_ASKYES },
- /*
- ** .pp
- ** Controls whether or not messages are saved in the ``$$postponed''
- ** mailbox when you elect not to send immediately.
- */
- { "postponed", DT_PATH, R_NONE, UL &Postponed, UL "~/postponed" },
- /*
- ** .pp
- ** Mutt-ng allows you to indefinitely ``$postpone sending a message'' which
- ** you are editing. When you choose to postpone a message, Mutt-ng saves it
- ** in the mailbox specified by this variable. Also see the ``$$postpone''
- ** variable.
- */
-#ifdef USE_SOCKET
- { "preconnect", DT_STR, R_NONE, UL &Preconnect, UL 0},
- /*
- ** .pp
- ** If set, a shell command to be executed if Mutt-ng fails to establish
- ** a connection to the server. This is useful for setting up secure
- ** connections, e.g. with ssh(1). If the command returns a nonzero
- ** status, Mutt-ng gives up opening the server. Example:
- ** .pp
- ** preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net
- ** sleep 20 < /dev/null > /dev/null"
- ** .pp
- ** Mailbox 'foo' on mailhost.net can now be reached
- ** as '{localhost:1234}foo'.
- ** .pp
- ** NOTE: For this example to work, you must be able to log in to the
- ** remote machine without having to enter a password.
- */
-#endif /* USE_SOCKET */
- { "print", DT_QUAD, R_NONE, OPT_PRINT, M_ASKNO },
- /*
- ** .pp
- ** Controls whether or not Mutt-ng really prints messages.
- ** This is set to \fIask-no\fP by default, because some people
- ** accidentally hit ``p'' often (like me).
- */
- { "print_command", DT_PATH, R_NONE, UL &PrintCmd, UL "lpr" },
- /*
- ** .pp
- ** This specifies the command pipe that should be used to print messages.
- */
- { "print_cmd", DT_SYN, R_NONE, UL "print_command", 0 },
- /*
- */
- { "print_decode", DT_BOOL, R_NONE, OPTPRINTDECODE, 1 },
- /*
- ** .pp
- ** Used in connection with the print-message command. If this
- ** option is set, the message is decoded before it is passed to the
- ** external command specified by $$print_command. If this option
- ** is unset, no processing will be applied to the message when
- ** printing it. The latter setting may be useful if you are using
- ** some advanced printer filter which is able to properly format
- ** e-mail messages for printing.
- */
- { "print_split", DT_BOOL, R_NONE, OPTPRINTSPLIT, 0 },
- /*
- ** .pp
- ** Used in connection with the print-message command. If this option
- ** is set, the command specified by $$print_command is executed once for
- ** each message which is to be printed. If this option is unset,
- ** the command specified by $$print_command is executed only once, and
- ** all the messages are concatenated, with a form feed as the message
- ** separator.
- ** .pp
- ** Those who use the \fBenscript\fP(1) program's mail-printing mode will
- ** most likely want to set this option.
- */
- { "prompt_after", DT_BOOL, R_NONE, OPTPROMPTAFTER, 1 },
- /*
- ** .pp
- ** If you use an \fIexternal\fP ``$$pager'', setting this variable will
- ** cause Mutt-ng to prompt you for a command when the pager exits rather
- ** than returning to the index menu. If unset, Mutt-ng will return to the
- ** index menu when the external pager exits.
- */
- { "query_command", DT_PATH, R_NONE, UL &QueryCmd, UL "" },
- /*
- ** .pp
- ** This specifies the command that Mutt-ng will use to make external address
- ** queries. The string should contain a %s, which will be substituted
- ** with the query string the user types. See ``$query'' for more
- ** information.
- */
- { "quit", DT_QUAD, R_NONE, OPT_QUIT, M_YES },
- /*
- ** .pp
- ** This variable controls whether ``quit'' and ``exit'' actually quit
- ** from Mutt-ng. If it set to yes, they do quit, if it is set to no, they
- ** have no effect, and if it is set to ask-yes or ask-no, you are
- ** prompted for confirmation when you try to quit.
- */
- { "quote_empty", DT_BOOL, R_NONE, OPTQUOTEEMPTY, 1 },
- /*
- ** .pp
- ** Controls whether or not empty lines will be quoted using
- ** ``$indent_string''.
- */
- { "quote_quoted", DT_BOOL, R_NONE, OPTQUOTEQUOTED, 0 },
- /*
- ** .pp
- ** Controls how quoted lines will be quoted. If set, one quote
- ** character will be added to the end of existing prefix. Otherwise,
- ** quoted lines will be prepended by ``$indent_string''.
- */
- { "quote_regexp", DT_RX, R_PAGER, UL &QuoteRegexp, UL "^([ \t]*[|>:}#])+" },
- /*
- ** .pp
- ** A regular expression used in the internal-pager to determine quoted
- ** sections of text in the body of a message.
- ** .pp
- ** \fBNote:\fP In order to use the \fIquoted\fP\fBx\fP patterns in the
- ** internal pager, you need to set this to a regular expression that
- ** matches \fIexactly\fP the quote characters at the beginning of quoted
- ** lines.
- */
- { "read_inc", DT_NUM, R_NONE, UL &ReadInc, 10 },
- /*
- ** .pp
- ** If set to a value greater than 0, Mutt-ng will display which message it
- ** is currently on when reading a mailbox. The message is printed after
- ** \fIread_inc\fP messages have been read (e.g., if set to 25, Mutt-ng will
- ** print a message when it reads message 25, and then again when it gets
- ** to message 50). This variable is meant to indicate progress when
- ** reading large mailboxes which may take some time.
- ** When set to 0, only a single message will appear before the reading
- ** the mailbox.
- ** .pp
- ** Also see the ``$$write_inc'' variable.
- */
- { "read_only", DT_BOOL, R_NONE, OPTREADONLY, 0 },
- /*
- ** .pp
- ** If set, all folders are opened in read-only mode.
- */
- { "realname", DT_STR, R_BOTH, UL &Realname, 0 },
- /*
- ** .pp
- ** This variable specifies what "real" or "personal" name should be used
- ** when sending messages.
- ** .pp
- ** By default, this is the GECOS field from /etc/passwd. Note that this
- ** variable will \fInot\fP be used when the user has set a real name
- ** in the $$from variable.
- */
- { "recall", DT_QUAD, R_NONE, OPT_RECALL, M_ASKYES },
- /*
- ** .pp
- ** Controls whether or not Mutt-ng recalls postponed messages
- ** when composing a new message. Also see ``$$postponed''.
- ** .pp
- ** Setting this variable to ``yes'' is not generally useful, and thus not
- ** recommended.
- */
- { "record", DT_PATH, R_NONE, UL &Outbox, UL "" },
- /*
- ** .pp
- ** This specifies the file into which your outgoing messages should be
- ** appended. (This is meant as the primary method for saving a copy of
- ** your messages, but another way to do this is using the ``$my_hdr''
- ** command to create a \fIBcc:\fP field with your email address in it.)
- ** .pp
- ** The value of \fI$$record\fP is overridden by the ``$$force_name'' and
- ** ``$$save_name'' variables, and the ``$fcc-hook'' command.
- */
- { "reply_regexp", DT_RX, R_INDEX|R_RESORT, UL &ReplyRegexp, UL "^(re([\\[0-9\\]+])*|aw):[ \t]*" },
- /*
- ** .pp
- ** A regular expression used to recognize reply messages when threading
- ** and replying. The default value corresponds to the English "Re:" and
- ** the German "Aw:".
- */
- { "reply_self", DT_BOOL, R_NONE, OPTREPLYSELF, 0 },
- /*
- ** .pp
- ** If unset and you are replying to a message sent by you, Mutt-ng will
- ** assume that you want to reply to the recipients of that message rather
- ** than to yourself.
- */
- { "reply_to", DT_QUAD, R_NONE, OPT_REPLYTO, M_ASKYES },
- /*
- ** .pp
- ** If set, when replying to a message, Mutt-ng will use the address listed
- ** in the Reply-to: header as the recipient of the reply. If unset,
- ** it will use the address in the From: header field instead. This
- ** option is useful for reading a mailing list that sets the Reply-To:
- ** header field to the list address and you want to send a private
- ** message to the author of a message.
- */
- { "resolve", DT_BOOL, R_NONE, OPTRESOLVE, 1 },
- /*
- ** .pp
- ** When set, the cursor will be automatically advanced to the next
- ** (possibly undeleted) message whenever a command that modifies the
- ** current message is executed.
- */
- { "reverse_alias", DT_BOOL, R_BOTH, OPTREVALIAS, 0 },
- /*
- ** .pp
- ** This variable controls whether or not Mutt-ng will display the "personal"
- ** name from your aliases in the index menu if it finds an alias that
- ** matches the message's sender. For example, if you have the following
- ** alias:
- ** .pp
- ** .ts
- ** alias juser abd30425@somewhere.net (Joe User)
- ** .te
- ** .pp
- ** and then you receive mail which contains the following header:
- ** .pp
- ** .ts
- ** From: abd30425@somewhere.net
- ** .te
- ** .pp
- ** It would be displayed in the index menu as ``Joe User'' instead of
- ** ``abd30425@somewhere.net.'' This is useful when the person's e-mail
- ** address is not human friendly (like CompuServe addresses).
- */
- { "reverse_name", DT_BOOL, R_BOTH, OPTREVNAME, 0 },
- /*
- ** .pp
- ** It may sometimes arrive that you receive mail to a certain machine,
- ** move the messages to another machine, and reply to some the messages
- ** from there. If this variable is set, the default \fIFrom:\fP line of
- ** the reply messages is built using the address where you received the
- ** messages you are replying to \fBif\fP that address matches your
- ** alternates. If the variable is unset, or the address that would be
- ** used doesn't match your alternates, the \fIFrom:\fP line will use
- ** your address on the current machine.
- */
- { "reverse_realname", DT_BOOL, R_BOTH, OPTREVREAL, 1 },
- /*
- ** .pp
- ** This variable fine-tunes the behaviour of the $reverse_name feature.
- ** When it is set, Mutt-ng will use the address from incoming messages as-is,
- ** possibly including eventual real names. When it is unset, Mutt-ng will
- ** override any such real names with the setting of the $realname variable.
- */
- { "rfc2047_parameters", DT_BOOL, R_NONE, OPTRFC2047PARAMS, 0 },
- /*
- ** .pp
- ** When this variable is set, Mutt-ng will decode RFC-2047-encoded MIME
- ** parameters. You want to set this variable when Mutt-ng suggests you
- ** to save attachments to files named like this:
- ** =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=
- ** .pp
- ** When this variable is set interactively, the change doesn't have
- ** the desired effect before you have changed folders.
- ** .pp
- ** Note that this use of RFC 2047's encoding is explicitly,
- ** prohibited by the standard, but nevertheless encountered in the
- ** wild.
- ** Also note that setting this parameter will \fInot\fP have the effect
- ** that Mutt-ng \fIgenerates\fP this kind of encoding. Instead, Mutt-ng will
- ** unconditionally use the encoding specified in RFC 2231.
- */
- { "save_address", DT_BOOL, R_NONE, OPTSAVEADDRESS, 0 },
- /*
- ** .pp
- ** If set, Mutt-ng will take the sender's full address when choosing a
- ** default folder for saving a mail. If ``$$save_name'' or ``$$force_name''
- ** is set too, the selection of the fcc folder will be changed as well.
- */
- { "save_empty", DT_BOOL, R_NONE, OPTSAVEEMPTY, 1 },
- /*
- ** .pp
- ** When unset, mailboxes which contain no saved messages will be removed
- ** when closed (the exception is ``$$spoolfile'' which is never removed).
- ** If set, mailboxes are never removed.
- ** .pp
- ** \fBNote:\fP This only applies to mbox and MMDF folders, Mutt-ng does not
- ** delete MH and Maildir directories.
- */
- { "save_name", DT_BOOL, R_NONE, OPTSAVENAME, 0 },
- /*
- ** .pp
- ** This variable controls how copies of outgoing messages are saved.
- ** When set, a check is made to see if a mailbox specified by the
- ** recipient address exists (this is done by searching for a mailbox in
- ** the ``$$folder'' directory with the \fIusername\fP part of the
- ** recipient address). If the mailbox exists, the outgoing message will
- ** be saved to that mailbox, otherwise the message is saved to the
- ** ``$$record'' mailbox.
- ** .pp
- ** Also see the ``$$force_name'' variable.
- */
- { "score", DT_BOOL, R_NONE, OPTSCORE, 1 },
- /*
- ** .pp
- ** When this variable is \fIunset\fP, scoring is turned off. This can
- ** be useful to selectively disable scoring for certain folders when the
- ** ``$$score_threshold_delete'' variable and friends are used.
- **
- */
- { "score_threshold_delete", DT_NUM, R_NONE, UL &ScoreThresholdDelete, UL -1 },
- /*
- ** .pp
- ** Messages which have been assigned a score equal to or lower than the value
- ** of this variable are automatically marked for deletion by Mutt-ng. Since
- ** Mutt-ng scores are always greater than or equal to zero, the default setting
- ** of this variable will never mark a message for deletion.
- */
- { "score_threshold_flag", DT_NUM, R_NONE, UL &ScoreThresholdFlag, 9999 },
- /*
- ** .pp
- ** Messages which have been assigned a score greater than or equal to this
- ** variable's value are automatically marked "flagged".
- */
- { "score_threshold_read", DT_NUM, R_NONE, UL &ScoreThresholdRead, UL -1 },
- /*
- ** .pp
- ** Messages which have been assigned a score equal to or lower than the value
- ** of this variable are automatically marked as read by Mutt-ng. Since
- ** Mutt-ng scores are always greater than or equal to zero, the default setting
- ** of this variable will never mark a message read.
- */
- { "send_charset", DT_STR, R_NONE, UL &SendCharset, UL "us-ascii:iso-8859-1:utf-8" },
- /*
- ** .pp
- ** A list of character sets for outgoing messages. Mutt-ng will use the
- ** first character set into which the text can be converted exactly.
- ** If your ``$$charset'' is not iso-8859-1 and recipients may not
- ** understand UTF-8, it is advisable to include in the list an
- ** appropriate widely used standard character set (such as
- ** iso-8859-2, koi8-r or iso-2022-jp) either instead of or after
- ** "iso-8859-1".
- */
- { "sendmail", DT_PATH, R_NONE, UL &Sendmail, UL SENDMAIL " -oem -oi" },
- /*
- ** .pp
- ** Specifies the program and arguments used to deliver mail sent by Mutt-ng.
- ** Mutt-ng expects that the specified program interprets additional
- ** arguments as recipient addresses.
- */
- { "sendmail_wait", DT_NUM, R_NONE, UL &SendmailWait, 0 },
- /*
- ** .pp
- ** Specifies the number of seconds to wait for the ``$$sendmail'' process
- ** to finish before giving up and putting delivery in the background.
- ** .pp
- ** Mutt-ng interprets the value of this variable as follows:
- ** .dl
- ** .dt >0 .dd number of seconds to wait for sendmail to finish before continuing
- ** .dt 0 .dd wait forever for sendmail to finish
- ** .dt <0 .dd always put sendmail in the background without waiting
- ** .de
- ** .pp
- ** Note that if you specify a value other than 0, the output of the child
- ** process will be put in a temporary file. If there is some error, you
- ** will be informed as to where to find the output.
- */
- { "shell", DT_PATH, R_NONE, UL &Shell, 0 },
- /*
- ** .pp
- ** Command to use when spawning a subshell. By default, the user's login
- ** shell from /etc/passwd is used.
- */
-#ifdef USE_NNTP
- { "save_unsubscribed",DT_BOOL, R_NONE, OPTSAVEUNSUB, 0 },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** When \fIset\fP, info about unsubscribed newsgroups will be saved into
- ** ``newsrc'' file and into cache.
- */
-#endif
- { "shorten_hierarchy", DT_BOOL, R_NONE, OPTSHORTENHIERARCHY, 0 },
- /*
- ** .pp
- ** When \fIset\fP, the "hierarchy" of the sidebar entries will be shortened
- ** only if they cannot be printed in full length (because ``$$sidebar_width''
- ** is set to a too low value). For example, if the newsgroup name
- ** ``de.alt.sysadmin.recovery'' doesn't fit on the screen, it'll get shortened
- ** ``d.a.s.recovery'' while ``de.alt.d0'' still would and thus will not get
- ** shortened.
- */
-#ifdef USE_NNTP
- { "show_new_news", DT_BOOL, R_NONE, OPTSHOWNEWNEWS, 1 },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** If \fIset\fP, newsserver will be asked for new newsgroups on entering
- ** the browser. Otherwise, it will be done only once for a newsserver.
- ** Also controls whether or not number of new articles of subscribed
- ** newsgroups will be then checked.
- */
- { "show_only_unread", DT_BOOL, R_NONE, OPTSHOWONLYUNREAD, 0 },