# following printf-style sequences are understood:
#
# %C charset
-# %c reqiures charset conversion (n or c)
+# %c requires charset conversion (n or c)
# %D deleted flag
# %d description
# %e MIME content-transfer-encoding
# Default: "-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-"
#
#
-# Controls the format of the status line displayed in the \fCompose
+# Controls the format of the status line displayed in the Compose
# menu. This string is similar to ``$status_format'', but has its own
# set of printf()-like sequences:
#
# information on how to set ``$compose_format''.
#
#
+# set config_charset=""
+#
+# Name: config_charset
+# Type: string
+# Default: ""
+#
+#
+# When defined, Mutt will recode commands in rc files from this
+# encoding.
+#
+#
# set confirmappend=yes
#
# Name: confirmappend
# ``$save_name'', ``$force_name'' and ``fcc-hook''.
#
#
+# set crypt_use_gpgme=no
+#
+# Name: crypt_use_gpgme
+# Type: boolean
+# Default: no
+#
+#
+# This variable controls the use the GPGME enabled crypto backends.
+# If it is set and Mutt was build with gpgme support, the gpgme code for
+# S/MIME and PGP will be used instead of the classic code. Note, that
+# you need to use this option in .muttrc as it won't have any effect when
+# used interactively.
+#
+#
# set crypt_autopgp=yes
#
# Name: crypt_autopgp
# Default: yes
#
#
-# If this option is set, mutt's revattach menu will not show the subparts of
-# individual messages in a digest. To see these subparts, press 'v' on that menu.
+# If this option is set, mutt's received-attachments menu will not show the subparts of
+# individual messages in a multipart/digest. To see these subparts, press 'v' on that menu.
#
#
# set display_filter=""
# thread tree.
#
#
+# set hide_thread_subject=yes
+#
+# Name: hide_thread_subject
+# Type: boolean
+# Default: yes
+#
+#
+# When set, mutt will not show the subject of messages in the thread
+# tree that have the same subject as their parent or closest previously
+# displayed sibling.
+#
+#
# set hide_top_limited=no
#
# Name: hide_top_limited
# This is a colon-delimited list of authentication methods mutt may
# attempt to use to log in to an IMAP server, in the order mutt should
# try them. Authentication methods are either 'login' or the right
-# side of an IMAP 'AUTH=xxx' capability string, eg 'digest-md5',
-# 'gssapi' or 'cram-md5'. This parameter is case-insensitive. If this
+# side of an IMAP 'AUTH=xxx' capability string, eg 'digest-md5', 'gssapi'
+# or 'cram-md5'. This parameter is case-insensitive. If this
# parameter is unset (the default) mutt will try all available methods,
# in order from most-secure to least-secure.
#
# connecting to IMAP servers.
#
#
+# set imap_headers=""
+#
+# Name: imap_headers
+# Type: string
+# Default: ""
+#
+#
+# Mutt requests these header fields in addition to the default headers
+# ("DATE FROM SUBJECT TO CC MESSAGE-ID REFERENCES CONTENT-TYPE
+# CONTENT-DESCRIPTION IN-REPLY-TO REPLY-TO LINES X-LABEL") from IMAP
+# servers before displaying the index menu. You may want to add more
+# headers for spam detection. Note: This is a space separated list.
+#
+#
# set imap_home_namespace=""
#
# Name: imap_home_namespace
# is included in your reply.
#
#
+# set include_onlyfirst=no
+#
+# Name: include_onlyfirst
+# Type: boolean
+# Default: no
+#
+#
+# Controls whether or not Mutt includes only the first attachment
+# of the message you are replying.
+#
+#
# set indent_string="> "
#
# Name: indent_string
# folder will be appended.
#
#
+# set sidebar_visible=no
+#
+# Name: sidebar_visible
+# Type: boolean
+# Default: no
+#
+#
+# This specifies whether or not to show the mailbox list pane.
+#
+#
+# set sidebar_width=0
+#
+# Name: sidebar_width
+# Type: number
+# Default: 0
+#
+#
+# The width of the mailbox list pane (left sidebar like in GUIs).
+#
+#
# set mbox_type=mbox
#
# Name: mbox_type
# (PGP only)
#
#
+# set pgp_autoinline=no
+#
+# Name: pgp_autoinline
+# Type: boolean
+# Default: no
+#
+#
+# This option controls whether Mutt generates old-style inline
+# (traditional) PGP encrypted or signed messages under certain
+# circumstances. This can be overridden by use of the pgp-menu,
+# when inline is not required.
+#
+# Note that Mutt might automatically use PGP/MIME for messages
+# which consist of more than a single MIME part. Mutt can be
+# configured to ask before sending PGP/MIME messages when inline
+# (traditional) would not work.
+# See also: ``$pgp_mime_auto''.
+#
+# Also note that using the old-style PGP message format is strongly
+# deprecated.
+# (PGP only)
+#
+#
+# set pgp_replyinline=no
+#
+# Name: pgp_replyinline
+# Type: boolean
+# Default: no
+#
+#
+# Setting this variable will cause Mutt to always attempt to
+# create an inline (traditional) message when replying to a
+# message which is PGP encrypted/signed inline. This can be
+# overridden by use of the pgp-menu, when inline is not
+# required. This option does not automatically detect if the
+# (replied-to) message is inline; instead it relies on Mutt
+# internals for previously checked/flagged messages.
+#
+# Note that Mutt might automatically use PGP/MIME for messages
+# which consist of more than a single MIME part. Mutt can be
+# configured to ask before sending PGP/MIME messages when inline
+# (traditional) would not work.
+# See also: ``$pgp_mime_auto''.
+#
+# Also note that using the old-style PGP message format is strongly
+# deprecated.
+# (PGP only)
+#
+#
# set pgp_show_unusable=yes
#
# Name: pgp_show_unusable
# (PGP only)
#
#
-# set pgp_create_traditional=no
+# set pgp_mime_auto=ask-yes
#
-# Name: pgp_create_traditional
+# Name: pgp_mime_auto
# Type: quadoption
-# Default: no
-#
+# Default: ask-yes
#
-# This option controls whether Mutt generates old-style inline PGP
-# encrypted or signed messages.
#
-# Note that PGP/MIME will be used automatically for messages which have
-# a character set different from us-ascii, or which consist of more than
-# a single MIME part.
+# This option controls whether Mutt will prompt you for
+# automatically sending a (signed/encrypted) message using
+# PGP/MIME when inline (traditional) fails (for any reason).
#
# Also note that using the old-style PGP message format is strongly
# deprecated.
# (PGP only)
#
#
-# set pgp_auto_traditional=no
-#
-# Name: pgp_auto_traditional
-# Type: boolean
-# Default: no
-#
-#
-# This option causes Mutt to generate an old-style inline PGP
-# encrypted or signed message when replying to an old-style
-# message, and a PGP/MIME message when replying to a PGP/MIME
-# message. Note that this option is only meaningful when using
-# ``$crypt_replyencrypt'', ``$crypt_replysign'', or
-# ``$crypt_replysignencrypted''.
-#
-# Also note that PGP/MIME will be used automatically for messages
-# which have a character set different from us-ascii, or which
-# consist of more than a single MIME part.
-#
-# This option overrides ``$pgp_create_traditional''
-# (PGP only)
-#
-#
# set pgp_decode_command=""
#
# Name: pgp_decode_command
#
#
# This command is used to extract only the signers X509 certificate from a S/MIME
-# signature, so that the certificate's owner may get compared to the email's
-# 'From'-field.
+# signature, so that the certificate's owner may get compared to the
+# email's 'From'-field.
# (S/MIME only)
#
#
# use STARTTLS regardless of the server's capabilities.
#
#
-# set certificate_file=""
+# set certificate_file="~/.mutt_certificates"
#
# Name: certificate_file
# Type: path
-# Default: ""
+# Default: "~/.mutt_certificates"
#
#
# This variable specifies the file where the certificates you trust
# SSL authentication process.
#
#
+# set ssl_client_cert=""
+#
+# Name: ssl_client_cert
+# Type: path
+# Default: ""
+#
+#
+# The file containing a client certificate and its associated private
+# key.
+#
+#
# set pipe_split=no
#
# Name: pipe_split
# move the messages to another machine, and reply to some the messages
# from there. If this variable is set, the default From: line of
# the reply messages is built using the address where you received the
-# messages you are replying to. If the variable is unset, the
-# From: line will use your address on the current machine.
+# messages you are replying to if that address matches your
+# alternates. If the variable is unset, or the address that would be
+# used doesn't match your alternates, the From: line will use
+# your address on the current machine.
#
#
# set reverse_realname=yes
# mailbox-order (unsorted)
# score
# size
+# spam
# subject
# threads
# to
# but kept to not break any existing configuration setting).
#
#
-# set sort_browser=subject
+# set sort_browser=alpha
#
# Name: sort_browser
# Type: sort order
-# Default: subject
+# Default: alpha
#
#
# Specifies how to sort entries in the file browser. By default, the
# non-``$reply_regexp'' parts of both messages are identical.
#
#
+# set spam_separator=","
+#
+# Name: spam_separator
+# Type: string
+# Default: ","
+#
+#
+# ``spam_separator'' controls what happens when multiple spam headers
+# are matched: if unset, each successive header will overwrite any
+# previous matches value for the spam label. If set, each successive
+# match will append to the previous, using ``spam_separator'' as a
+# separator.
+#
+#
# set spoolfile=""
#
# Name: spoolfile
# Normally, the default should work.
#
#
-# set use_ipv6=yes
-#
-# Name: use_ipv6
-# Type: boolean
-# Default: yes
-#
-#
-# When set, Mutt will look for IPv6 addresses of hosts it tries to
-# contact. If this option is unset, Mutt will restrict itself to IPv4 addresses.
-# Normally, the default should work.
-#
-#
# set user_agent=yes
#
# Name: user_agent