# # System configuration file for Mutt # # default list of header fields to weed when displaying # ignore "from " received content- mime-version status x-status message-id ignore sender references return-path lines # imitate the old search-body function macro index \eb '/~b ' 'search in message bodies' # simulate the old url menu macro index \cb |urlview\n 'call urlview to extract URLs out of a message' macro pager \cb |urlview\n 'call urlview to extract URLs out of a message' # Show documentation when pressing F1 macro generic "!less /usr/local/doc/mutt/manual.txt\n" "Show Mutt documentation" macro index "!less /usr/local/doc/mutt/manual.txt\n" "Show Mutt documentation" macro pager "!less /usr/local/doc/mutt/manual.txt\n" "Show Mutt documentation" # If Mutt is unable to determine your site's domain name correctly, you can # set the default here. # # set hostname=cs.hmc.edu # If your sendmail supports the -B8BITMIME flag, enable the following # # set use_8bitmime ## ## More settings ## # set abort_nosubject=ask-yes # # Name: abort_nosubject # Type: quadoption # Default: ask-yes # # # If set to yes, when composing messages and no subject is given # at the subject prompt, composition will be aborted. If set to # no, composing messages with no subject given at the subject # prompt will never be aborted. # # # set abort_unmodified=yes # # Name: abort_unmodified # Type: quadoption # Default: yes # # # If set to yes, composition will automatically abort after # editing the message body if no changes are made to the file (this # check only happens after the first edit of the file). When set # to no, composition will never be aborted. # # # set alias_file="~/.muttrc" # # Name: alias_file # Type: path # Default: "~/.muttrc" # # # The default file in which to save aliases created by the # ``create-alias'' function. # # Note: Mutt will not automatically source this file; you must # explicitly use the ``source'' command for it to be executed. # # # set alias_format="%4n %2f %t %-10a %r" # # Name: alias_format # Type: string # Default: "%4n %2f %t %-10a %r" # # # Specifies the format of the data displayed for the `alias' menu. The # following printf(3)-style sequences are available: # # %a alias name # %f flags - currently, a "d" for an alias marked for deletion # %n index number # %r address which alias expands to # %t character which indicates if the alias is tagged for inclusion # # # set allow_8bit=yes # # Name: allow_8bit # Type: boolean # Default: yes # # # Controls whether 8-bit data is converted to 7-bit using either Quoted- # Printable or Base64 encoding when sending mail. # # # set allow_ansi=no # # Name: allow_ansi # Type: boolean # Default: no # # # Controls whether ANSI color codes in messages (and color tags in # rich text messages) are to be interpreted. # Messages containing these codes are rare, but if this option is set, # their text will be colored accordingly. Note that this may override # your color choices, and even present a security problem, since a # message could include a line like "[-- PGP output follows ..." and # give it the same color as your attachment color. # # # set arrow_cursor=no # # Name: arrow_cursor # Type: boolean # Default: no # # # When set, an arrow (``->'') will be used to indicate the current entry # in menus instead of highlighting the whole line. On slow network or modem # links this will make response faster because there is less that has to # be redrawn on the screen when moving to the next or previous entries # in the menu. # # # set ascii_chars=no # # Name: ascii_chars # Type: boolean # Default: no # # # If set, Mutt will use plain ASCII characters when displaying thread # and attachment trees, instead of the default ACS characters. # # # set askbcc=no # # Name: askbcc # Type: boolean # Default: no # # # If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients # before editing an outgoing message. # # # set askcc=no # # Name: askcc # Type: boolean # Default: no # # # If set, Mutt will prompt you for carbon-copy (Cc) recipients before # editing the body of an outgoing message. # # # set ask_follow_up=no # # Name: ask_follow_up # Type: boolean # Default: no # # # If set, Mutt will prompt you for follow-up groups before editing # the body of an outgoing message. # # # set ask_x_comment_to=no # # Name: ask_x_comment_to # Type: boolean # Default: no # # # If set, Mutt will prompt you for x-comment-to field before editing # the body of an outgoing message. # # # set attach_format="%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] " # # Name: attach_format # Type: string # Default: "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] " # # # This variable describes the format of the `attachment' menu. The # following printf-style sequences are understood: # # %C charset # %c requires charset conversion (n or c) # %D deleted flag # %d description # %e MIME content-transfer-encoding # %f filename # %I disposition (I=inline, A=attachment) # %m major MIME type # %M MIME subtype # %n attachment number # %s size # %t tagged flag # %T graphic tree characters # %u unlink (=to delete) flag # %>X right justify the rest of the string and pad with character "X" # %|X pad to the end of the line with character "X" # # # set attach_sep="\n" # # Name: attach_sep # Type: string # Default: "\n" # # # The separator to add between attachments when operating (saving, # printing, piping, etc) on a list of tagged attachments. # # # set attach_split=yes # # Name: attach_split # Type: boolean # Default: yes # # # If this variable is unset, when operating (saving, printing, piping, # etc) on a list of tagged attachments, Mutt will concatenate the # attachments and will operate on them as a single attachment. The # ``$attach_sep'' separator is added after each attachment. When set, # Mutt will operate on the attachments one by one. # # # set attribution="On %d, %n wrote:" # # Name: attribution # Type: string # Default: "On %d, %n wrote:" # # # This is the string that will precede a message which has been included # in a reply. For a full listing of defined printf()-like sequences see # the section on ``$index_format''. # # # set autoedit=no # # Name: autoedit # Type: boolean # Default: no # # # When set along with ``$edit_headers'', Mutt will skip the initial # send-menu and allow you to immediately begin editing the body of your # message. The send-menu may still be accessed once you have finished # editing the body of your message. # # Also see ``$fast_reply''. # # # set auto_tag=no # # Name: auto_tag # Type: boolean # Default: no # # # When set, functions in the index menu which affect a message # will be applied to all tagged messages (if there are any). When # unset, you must first use the tag-prefix function (default: ";") to # make the next function apply to all tagged messages. # # # set beep=yes # # Name: beep # Type: boolean # Default: yes # # # When this variable is set, mutt will beep when an error occurs. # # # set beep_new=no # # Name: beep_new # Type: boolean # Default: no # # # When this variable is set, mutt will beep whenever it prints a message # notifying you of new mail. This is independent of the setting of the # ``$beep'' variable. # # # set bounce=ask-yes # # Name: bounce # Type: quadoption # Default: ask-yes # # # Controls whether you will be asked to confirm bouncing messages. # If set to yes you don't get asked if you want to bounce a # message. Setting this variable to no is not generally useful, # and thus not recommended, because you are unable to bounce messages. # # # set bounce_delivered=yes # # Name: bounce_delivered # Type: boolean # Default: yes # # # When this variable is set, mutt will include Delivered-To headers when # bouncing messages. Postfix users may wish to unset this variable. # # # set catchup_newsgroup=ask-yes # # Name: catchup_newsgroup # Type: quadoption # Default: ask-yes # # # If this variable is set, Mutt will mark all articles in newsgroup # as read when you quit the newsgroup (catchup newsgroup). # # # set charset="" # # Name: charset # Type: string # Default: "" # # # Character set your terminal uses to display and enter textual data. # # # set check_new=yes # # Name: check_new # Type: boolean # Default: yes # # # Note: this option only affects maildir and MH style # mailboxes. # # When set, Mutt will check for new mail delivered while the # mailbox is open. Especially with MH mailboxes, this operation can # take quite some time since it involves scanning the directory and # checking each file to see if it has already been looked at. If # check_new is unset, no check for new mail is performed # while the mailbox is open. # # # set collapse_unread=yes # # Name: collapse_unread # Type: boolean # Default: yes # # # When unset, Mutt will not collapse a thread if it contains any # unread messages. # # # set uncollapse_jump=no # # Name: uncollapse_jump # Type: boolean # Default: no # # # When set, Mutt will jump to the next unread message, if any, # when the current thread is uncollapsed. # # # set compose_format="-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-" # # Name: compose_format # Type: string # Default: "-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-" # # # Controls the format of the status line displayed in the Compose # menu. This string is similar to ``$status_format'', but has its own # set of printf()-like sequences: # # %a total number of attachments # %h local hostname # %l approximate size (in bytes) of the current message # %v Mutt version string # # # See the text describing the ``$status_format'' option for more # information on how to set ``$compose_format''. # # # set config_charset="" # # Name: config_charset # Type: string # Default: "" # # # When defined, Mutt will recode commands in rc files from this # encoding. # # # set confirmappend=yes # # Name: confirmappend # Type: boolean # Default: yes # # # When set, Mutt will prompt for confirmation when appending messages to # an existing mailbox. # # # set confirmcreate=yes # # Name: confirmcreate # Type: boolean # Default: yes # # # When set, Mutt will prompt for confirmation when saving messages to a # mailbox which does not yet exist before creating it. # # # set connect_timeout=30 # # Name: connect_timeout # Type: number # Default: 30 # # # Causes Mutt to timeout a network connection (for IMAP or POP) after this # many seconds if the connection is not able to be established. A negative # value causes Mutt to wait indefinitely for the connection to succeed. # # # set content_type="text/plain" # # Name: content_type # Type: string # Default: "text/plain" # # # Sets the default Content-Type for the body of newly composed messages. # # # set copy=yes # # Name: copy # Type: quadoption # Default: yes # # # This variable controls whether or not copies of your outgoing messages # will be saved for later references. Also see ``$record'', # ``$save_name'', ``$force_name'' and ``fcc-hook''. # # # set crypt_use_gpgme=no # # Name: crypt_use_gpgme # Type: boolean # Default: no # # # This variable controls the use the GPGME enabled crypto backends. # If it is set and Mutt was build with gpgme support, the gpgme code for # S/MIME and PGP will be used instead of the classic code. Note, that # you need to use this option in .muttrc as it won't have any effect when # used interactively. # # # set crypt_autopgp=yes # # Name: crypt_autopgp # Type: boolean # Default: yes # # # This variable controls whether or not mutt may automatically enable # PGP encryption/signing for messages. See also ``$crypt_autoencrypt'', # ``$crypt_replyencrypt'', # ``$crypt_autosign'', ``$crypt_replysign'' and ``$smime_is_default''. # # # set crypt_autosmime=yes # # Name: crypt_autosmime # Type: boolean # Default: yes # # # This variable controls whether or not mutt may automatically enable # S/MIME encryption/signing for messages. See also ``$crypt_autoencrypt'', # ``$crypt_replyencrypt'', # ``$crypt_autosign'', ``$crypt_replysign'' and ``$smime_is_default''. # # # set date_format="!%a, %b %d, %Y at %I:%M:%S%p %Z" # # Name: date_format # Type: string # Default: "!%a, %b %d, %Y at %I:%M:%S%p %Z" # # # This variable controls the format of the date printed by the ``%d'' # sequence in ``$index_format''. This is passed to the strftime # call to process the date. See the man page for strftime(3) for # the proper syntax. # # Unless the first character in the string is a bang (``!''), the month # and week day names are expanded according to the locale specified in # the variable ``$locale''. If the first character in the string is a # bang, the bang is discarded, and the month and week day names in the # rest of the string are expanded in the C locale (that is in US # English). # # # set default_hook="~f %s !~P | (~P ~C %s)" # # Name: default_hook # Type: string # Default: "~f %s !~P | (~P ~C %s)" # # # This variable controls how send-hooks, message-hooks, save-hooks, # and fcc-hooks will # be interpreted if they are specified with only a simple regexp, # instead of a matching pattern. The hooks are expanded when they are # declared, so a hook will be interpreted according to the value of this # variable at the time the hook is declared. The default value matches # if the message is either from a user matching the regular expression # given, or if it is from you (if the from address matches # ``alternates'') and is to or cc'ed to a user matching the given # regular expression. # # # set delete=ask-yes # # Name: delete # Type: quadoption # Default: ask-yes # # # Controls whether or not messages are really deleted when closing or # synchronizing a mailbox. If set to yes, messages marked for # deleting will automatically be purged without prompting. If set to # no, messages marked for deletion will be kept in the mailbox. # # # set delete_untag=yes # # Name: delete_untag # Type: boolean # Default: yes # # # If this option is set, mutt will untag messages when marking them # for deletion. This applies when you either explicitly delete a message, # or when you save it to another folder. # # # set digest_collapse=yes # # Name: digest_collapse # Type: boolean # Default: yes # # # If this option is set, mutt's received-attachments menu will not show the subparts of # individual messages in a multipart/digest. To see these subparts, press 'v' on that menu. # # # set display_filter="" # # Name: display_filter # Type: path # Default: "" # # # When set, specifies a command used to filter messages. When a message # is viewed it is passed as standard input to $display_filter, and the # filtered message is read from the standard output. # # # set dotlock_program="/usr/local/bin/mutt_dotlock" # # Name: dotlock_program # Type: path # Default: "/usr/local/bin/mutt_dotlock" # # # Contains the path of the mutt_dotlock (8) binary to be used by # mutt. # # # set dsn_notify="" # # Name: dsn_notify # Type: string # Default: "" # # # Note: you should not enable this unless you are using Sendmail # 8.8.x or greater. # # This variable sets the request for when notification is returned. The # string consists of a comma separated list (no spaces!) of one or more # of the following: never, to never request notification, # failure, to request notification on transmission failure, # delay, to be notified of message delays, success, to be # notified of successful transmission. # # Example: set dsn_notify="failure,delay" # # # set dsn_return="" # # Name: dsn_return # Type: string # Default: "" # # # Note: you should not enable this unless you are using Sendmail # 8.8.x or greater. # # This variable controls how much of your message is returned in DSN # messages. It may be set to either hdrs to return just the # message header, or full to return the full message. # # Example: set dsn_return=hdrs # # # set duplicate_threads=yes # # Name: duplicate_threads # Type: boolean # Default: yes # # # This variable controls whether mutt, when sorting by threads, threads # messages with the same message-id together. If it is set, it will indicate # that it thinks they are duplicates of each other with an equals sign # in the thread diagram. # # # set edit_headers=no # # Name: edit_headers # Type: boolean # Default: no # # # This option allows you to edit the header of your outgoing messages # along with the body of your message. # # # set editor="" # # Name: editor # Type: path # Default: "" # # # This variable specifies which editor is used by mutt. # It defaults to the value of the VISUAL, or EDITOR, environment # variable, or to the string "vi" if neither of those are set. # # # set encode_from=no # # Name: encode_from # Type: boolean # Default: no # # # When set, mutt will quoted-printable encode messages when # they contain the string "From " in the beginning of a line. # Useful to avoid the tampering certain mail delivery and transport # agents tend to do with messages. # # # set envelope_from=no # # Name: envelope_from # Type: boolean # Default: no # # # When set, mutt will try to derive the message's envelope # sender from the "From:" header. Note that this information is passed # to sendmail command using the "-f" command line switch, so don't set this # option if you are using that switch in $sendmail yourself, # or if the sendmail on your machine doesn't support that command # line switch. # # # set escape="~" # # Name: escape # Type: string # Default: "~" # # # Escape character to use for functions in the builtin editor. # # # set fast_reply=no # # Name: fast_reply # Type: boolean # Default: no # # # When set, the initial prompt for recipients and subject are skipped # when replying to messages, and the initial prompt for subject is # skipped when forwarding messages. # # Note: this variable has no effect when the ``$autoedit'' # variable is set. # # # set fcc_attach=yes # # Name: fcc_attach # Type: boolean # Default: yes # # # This variable controls whether or not attachments on outgoing messages # are saved along with the main body of your message. # # # set fcc_clear=no # # Name: fcc_clear # Type: boolean # Default: no # # # When this variable is set, FCCs will be stored unencrypted and # unsigned, even when the actual message is encrypted and/or # signed. # (PGP only) # # # set folder="~/Mail" # # Name: folder # Type: path # Default: "~/Mail" # # # Specifies the default location of your mailboxes. A `+' or `=' at the # beginning of a pathname will be expanded to the value of this # variable. Note that if you change this variable from the default # value you need to make sure that the assignment occurs before # you use `+' or `=' for any other variables since expansion takes place # during the `set' command. # # # set folder_format="%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f" # # Name: folder_format # Type: string # Default: "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f" # # # This variable allows you to customize the file browser display to your # personal taste. This string is similar to ``$index_format'', but has # its own set of printf()-like sequences: # # %C current file number # %d date/time folder was last modified # %f filename # %F file permissions # %g group name (or numeric gid, if missing) # %l number of hard links # %N N if folder has new mail, blank otherwise # %s size in bytes # %t * if the file is tagged, blank otherwise # %u owner name (or numeric uid, if missing) # %>X right justify the rest of the string and pad with character "X" # %|X pad to the end of the line with character "X" # # # set followup_to=yes # # Name: followup_to # Type: boolean # Default: yes # # # Controls whether or not the Mail-Followup-To header field is # generated when sending mail. When set, Mutt will generate this # field when you are replying to a known mailing list, specified with # the ``subscribe'' or ``lists'' commands. # # This field has two purposes. First, preventing you from # receiving duplicate copies of replies to messages which you send # to mailing lists, and second, ensuring that you do get a reply # separately for any messages sent to known lists to which you are # not subscribed. The header will contain only the list's address # for subscribed lists, and both the list address and your own # email address for unsubscribed lists. Without this header, a # group reply to your message sent to a subscribed list will be # sent to both the list and your address, resulting in two copies # of the same email for you. # # # set followup_to_poster=ask-yes # # Name: followup_to_poster # Type: quadoption # Default: ask-yes # # # If this variable is set and the keyword "poster" is present in # Followup-To header, follow-up to newsgroup function is not # permitted. The message will be mailed to the submitter of the # message via mail. # # # set force_name=no # # Name: force_name # Type: boolean # Default: no # # # This variable is similar to ``$save_name'', except that Mutt will # store a copy of your outgoing message by the username of the address # you are sending to even if that mailbox does not exist. # # Also see the ``$record'' variable. # # # set forward_decode=yes # # Name: forward_decode # Type: boolean # Default: yes # # # Controls the decoding of complex MIME messages into text/plain when # forwarding a message. The message header is also RFC2047 decoded. # This variable is only used, if ``$mime_forward'' is unset, # otherwise ``$mime_forward_decode'' is used instead. # # # set forward_edit=yes # # Name: forward_edit # Type: quadoption # Default: yes # # # This quadoption controls whether or not the user is automatically # placed in the editor when forwarding messages. For those who always want # to forward with no modification, use a setting of ``no''. # # # set forward_format="[%a: %s]" # # Name: forward_format # Type: string # Default: "[%a: %s]" # # # This variable controls the default subject when forwarding a message. # It uses the same format sequences as the ``$index_format'' variable. # # # set forward_quote=no # # Name: forward_quote # Type: boolean # Default: no # # # When set forwarded messages included in the main body of the # message (when ``$mime_forward'' is unset) will be quoted using # ``$indent_string''. # # # set from="" # # Name: from # Type: e-mail address # Default: "" # # # When set, this variable contains a default from address. It # can be overridden using my_hdr (including from send-hooks) and # ``$reverse_name''. This variable is ignored if ``$use_from'' # is unset. # # Defaults to the contents of the environment variable EMAIL. # # # set gecos_mask="^[^,]*" # # Name: gecos_mask # Type: regular expression # Default: "^[^,]*" # # # A regular expression used by mutt to parse the GECOS field of a password # entry when expanding the alias. By default the regular expression is set # to "^[^,]*" which will return the string up to the first "," encountered. # If the GECOS field contains a string like "lastname, firstname" then you # should set the gecos_mask=".*". # # This can be useful if you see the following behavior: you address a e-mail # to user ID stevef whose full name is Steve Franklin. If mutt expands # stevef to "Franklin" stevef@foo.bar then you should set the gecos_mask to # a regular expression that will match the whole name so mutt will expand # "Franklin" to "Franklin, Steve". # # # set group_index_format="%4C %M%N %5s %-45.45f %d" # # Name: group_index_format # Type: string # Default: "%4C %M%N %5s %-45.45f %d" # # # This variable allows you to customize the newsgroup browser display to # your personal taste. This string is similar to ``index_format'', but # has its own set of printf()-like sequences: # # %C current newsgroup number # %d description of newsgroup (becomes from server) # %f newsgroup name # %M - if newsgroup not allowed for direct post (moderated for example) # %N N if newsgroup is new, u if unsubscribed, blank otherwise # %n number of new articles in newsgroup # %s number of unread articles in newsgroup # %>X right justify the rest of the string and pad with character "X" # %|X pad to the end of the line with character "X" # # # set hdrs=yes # # Name: hdrs # Type: boolean # Default: yes # # # When unset, the header fields normally added by the ``my_hdr'' # command are not created. This variable must be unset before # composing a new message or replying in order to take effect. If set, # the user defined header fields are added to every new message. # # # set header=no # # Name: header # Type: boolean # Default: no # # # When set, this variable causes Mutt to include the header # of the message you are replying to into the edit buffer. # The ``$weed'' setting applies. # # # set help=yes # # Name: help # Type: boolean # Default: yes # # # When set, help lines describing the bindings for the major functions # provided by each menu are displayed on the first line of the screen. # # Note: The binding will not be displayed correctly if the # function is bound to a sequence rather than a single keystroke. Also, # the help line may not be updated if a binding is changed while Mutt is # running. Since this variable is primarily aimed at new users, neither # of these should present a major problem. # # # set hidden_host=no # # Name: hidden_host # Type: boolean # Default: no # # # When set, mutt will skip the host name part of ``$hostname'' variable # when adding the domain part to addresses. This variable does not # affect the generation of Message-IDs, and it will not lead to the # cut-off of first-level domains. # # # set hide_limited=no # # Name: hide_limited # Type: boolean # Default: no # # # When set, mutt will not show the presence of messages that are hidden # by limiting, in the thread tree. # # # set hide_missing=yes # # Name: hide_missing # Type: boolean # Default: yes # # # When set, mutt will not show the presence of missing messages in the # thread tree. # # # set hide_thread_subject=yes # # Name: hide_thread_subject # Type: boolean # Default: yes # # # When set, mutt will not show the subject of messages in the thread # tree that have the same subject as their parent or closest previously # displayed sibling. # # # set hide_top_limited=no # # Name: hide_top_limited # Type: boolean # Default: no # # # When set, mutt will not show the presence of messages that are hidden # by limiting, at the top of threads in the thread tree. Note that when # $hide_missing is set, this option will have no effect. # # # set hide_top_missing=yes # # Name: hide_top_missing # Type: boolean # Default: yes # # # When set, mutt will not show the presence of missing messages at the # top of threads in the thread tree. Note that when $hide_limited is # set, this option will have no effect. # # # set history=10 # # Name: history # Type: number # Default: 10 # # # This variable controls the size (in number of strings remembered) of # the string history buffer. The buffer is cleared each time the # variable is set. # # # set honor_followup_to=yes # # Name: honor_followup_to # Type: quadoption # Default: yes # # # This variable controls whether or not a Mail-Followup-To header is # honored when group-replying to a message. # # # set hostname="" # # Name: hostname # Type: string # Default: "" # # # Specifies the hostname to use after the ``@'' in local e-mail # addresses. This overrides the compile time definition obtained from # /etc/resolv.conf. # # # set ignore_list_reply_to=no # # Name: ignore_list_reply_to # Type: boolean # Default: no # # # Affects the behaviour of the reply function when replying to # messages from mailing lists. When set, if the ``Reply-To:'' field is # set to the same value as the ``To:'' field, Mutt assumes that the # ``Reply-To:'' field was set by the mailing list to automate responses # to the list, and will ignore this field. To direct a response to the # mailing list when this option is set, use the list-reply # function; group-reply will reply to both the sender and the # list. # # # set imap_authenticators="" # # Name: imap_authenticators # Type: string # Default: "" # # # This is a colon-delimited list of authentication methods mutt may # attempt to use to log in to an IMAP server, in the order mutt should # try them. Authentication methods are either 'login' or the right # side of an IMAP 'AUTH=xxx' capability string, eg 'digest-md5', 'gssapi' # or 'cram-md5'. This parameter is case-insensitive. If this # parameter is unset (the default) mutt will try all available methods, # in order from most-secure to least-secure. # # Example: set imap_authenticators="gssapi:cram-md5:login" # # Note: Mutt will only fall back to other authentication methods if # the previous methods are unavailable. If a method is available but # authentication fails, mutt will not connect to the IMAP server. # # # set imap_delim_chars="/." # # Name: imap_delim_chars # Type: string # Default: "/." # # # This contains the list of characters which you would like to treat # as folder separators for displaying IMAP paths. In particular it # helps in using the '=' shortcut for your folder variable. # # # set imap_force_ssl=no # # Name: imap_force_ssl # Type: boolean # Default: no # # # If this variable is set, Mutt will always use SSL when # connecting to IMAP servers. # # # set imap_headers="" # # Name: imap_headers # Type: string # Default: "" # # # Mutt requests these header fields in addition to the default headers # ("DATE FROM SUBJECT TO CC MESSAGE-ID REFERENCES CONTENT-TYPE # CONTENT-DESCRIPTION IN-REPLY-TO REPLY-TO LINES X-LABEL") from IMAP # servers before displaying the index menu. You may want to add more # headers for spam detection. Note: This is a space separated list. # # # set imap_home_namespace="" # # Name: imap_home_namespace # Type: string # Default: "" # # # You normally want to see your personal folders alongside # your INBOX in the IMAP browser. If you see something else, you may set # this variable to the IMAP path to your folders. # # # set imap_keepalive=900 # # Name: imap_keepalive # Type: number # Default: 900 # # # This variable specifies the maximum amount of time in seconds that mutt # will wait before polling open IMAP connections, to prevent the server # from closing them before mutt has finished with them. The default is # well within the RFC-specified minimum amount of time (30 minutes) before # a server is allowed to do this, but in practice the RFC does get # violated every now and then. Reduce this number if you find yourself # getting disconnected from your IMAP server due to inactivity. # # # set imap_list_subscribed=no # # Name: imap_list_subscribed # Type: boolean # Default: no # # # This variable configures whether IMAP folder browsing will look for # only subscribed folders or all folders. This can be toggled in the # IMAP browser with the toggle-subscribed function. # # # set imap_pass="" # # Name: imap_pass # Type: string # Default: "" # # # Specifies the password for your IMAP account. If unset, Mutt will # prompt you for your password when you invoke the fetch-mail function. # Warning: you should only use this option when you are on a # fairly secure machine, because the superuser can read your muttrc even # if you are the only one who can read the file. # # # set imap_passive=yes # # Name: imap_passive # Type: boolean # Default: yes # # # When set, mutt will not open new IMAP connections to check for new # mail. Mutt will only check for new mail over existing IMAP # connections. This is useful if you don't want to be prompted to # user/password pairs on mutt invocation, or if opening the connection # is slow. # # # set imap_peek=yes # # Name: imap_peek # Type: boolean # Default: yes # # # If set, mutt will avoid implicitly marking your mail as read whenever # you fetch a message from the server. This is generally a good thing, # but can make closing an IMAP folder somewhat slower. This option # exists to appease speed freaks. # # # set imap_servernoise=yes # # Name: imap_servernoise # Type: boolean # Default: yes # # # When set, mutt will display warning messages from the IMAP # server as error messages. Since these messages are often # harmless, or generated due to configuration problems on the # server which are out of the users' hands, you may wish to suppress # them at some point. # # # set imap_user="" # # Name: imap_user # Type: string # Default: "" # # # Your login name on the IMAP server. # # This variable defaults to your user name on the local machine. # # # set implicit_autoview=no # # Name: implicit_autoview # Type: boolean # Default: no # # # If set to ``yes'', mutt will look for a mailcap entry with the # copiousoutput flag set for every MIME attachment it doesn't have # an internal viewer defined for. If such an entry is found, mutt will # use the viewer defined in that entry to convert the body part to text # form. # # # set include=ask-yes # # Name: include # Type: quadoption # Default: ask-yes # # # Controls whether or not a copy of the message(s) you are replying to # is included in your reply. # # # set include_onlyfirst=no # # Name: include_onlyfirst # Type: boolean # Default: no # # # Controls whether or not Mutt includes only the first attachment # of the message you are replying. # # # set indent_string="> " # # Name: indent_string # Type: string # Default: "> " # # # Specifies the string to prepend to each line of text quoted in a # message to which you are replying. You are strongly encouraged not to # change this value, as it tends to agitate the more fanatical netizens. # # # set index_format="%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s" # # Name: index_format # Type: string # Default: "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s" # # # This variable allows you to customize the message index display to # your personal taste. # # ``Format strings'' are similar to the strings used in the ``C'' # function printf to format output (see the man page for more detail). # The following sequences are defined in Mutt: # # %a address of the author # %A reply-to address (if present; otherwise: address of author) # %b filename of the original message folder (think mailBox) # %B the list to which the letter was sent, or else the folder name (%b). # %c number of characters (bytes) in the message # %C current message number # %d date and time of the message in the format specified by # ``date_format'' converted to sender's time zone # %D date and time of the message in the format specified by # ``date_format'' converted to the local time zone # %e current message number in thread # %E number of messages in current thread # %f entire From: line (address + real name) # %F author name, or recipient name if the message is from you # %g newsgroup name (if compiled with nntp support) # %i message-id of the current message # %l number of lines in the message (does not work with maildir, # mh, and possibly IMAP folders) # %L If an address in the To or CC header field matches an address # defined by the users ``subscribe'' command, this displays # "To ", otherwise the same as %F. # %m total number of message in the mailbox # %M number of hidden messages if the thread is collapsed. # %N message score # %n author's real name (or address if missing) # %O (_O_riginal save folder) Where mutt would formerly have # stashed the message: list name or recipient name if no list # %s subject of the message # %S status of the message (N/D/d/!/r/*) # %t `to:' field (recipients) # %T the appropriate character from the $to_chars string # %u user (login) name of the author # %v first name of the author, or the recipient if the message is from you # %W name of organization of author (`organization:' field) # %y `x-label:' field, if present # %Y `x-label' field, if present, and (1) not at part of a thread tree, # (2) at the top of a thread, or (3) `x-label' is different from # preceding message's `x-label'. # %Z message status flags # %{fmt} the date and time of the message is converted to sender's # time zone, and ``fmt'' is expanded by the library function # ``strftime''; a leading bang disables locales # %[fmt] the date and time of the message is converted to the local # time zone, and ``fmt'' is expanded by the library function # ``strftime''; a leading bang disables locales # %(fmt) the local date and time when the message was received. # ``fmt'' is expanded by the library function ``strftime''; # a leading bang disables locales # % the current local time. ``fmt'' is expanded by the library # function ``strftime''; a leading bang disables locales. # %>X right justify the rest of the string and pad with character "X" # %|X pad to the end of the line with character "X" # # # See also: ``$to_chars''. # # # set inews="" # # Name: inews # Type: path # Default: "" # # # If set, specifies the program and arguments used to deliver news posted # by Mutt. Otherwise, mutt posts article using current connection to # news server. The following printf-style sequence is understood: # # %s newsserver name # # Example: set inews="/usr/local/bin/inews -hS" # # # set ispell="/usr/bin/ispell" # # Name: ispell # Type: path # Default: "/usr/bin/ispell" # # # How to invoke ispell (GNU's spell-checking software). # # # set keep_flagged=no # # Name: keep_flagged # Type: boolean # Default: no # # # If set, read messages marked as flagged will not be moved # from your spool mailbox to your ``$mbox'' mailbox, or as a result of # a ``mbox-hook'' command. # # # set locale="C" # # Name: locale # Type: string # Default: "C" # # # The locale used by strftime(3) to format dates. Legal values are # the strings your system accepts for the locale variable LC_TIME. # # # set mail_check=5 # # Name: mail_check # Type: number # Default: 5 # # # This variable configures how often (in seconds) mutt should look for # new mail. # # # set mailcap_path="" # # Name: mailcap_path # Type: string # Default: "" # # # This variable specifies which files to consult when attempting to # display MIME bodies not directly supported by Mutt. # # # set mailcap_sanitize=yes # # Name: mailcap_sanitize # Type: boolean # Default: yes # # # If set, mutt will restrict possible characters in mailcap % expandos # to a well-defined set of safe characters. This is the safe setting, # but we are not sure it doesn't break some more advanced MIME stuff. # # DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE # DOING! # # # set maildir_trash=no # # Name: maildir_trash # Type: boolean # Default: no # # # If set, messages marked as deleted will be saved with the maildir # (T)rashed flag instead of unlinked. NOTE: this only applies # to maildir-style mailboxes. Setting it will have no effect on other # mailbox types. # # # set mark_old=yes # # Name: mark_old # Type: boolean # Default: yes # # # Controls whether or not mutt marks new unread # messages as old if you exit a mailbox without reading them. # With this option set, the next time you start mutt, the messages # will show up with an "O" next to them in the index menu, # indicating that they are old. # # # set markers=yes # # Name: markers # Type: boolean # Default: yes # # # Controls the display of wrapped lines in the internal pager. If set, a # ``+'' marker is displayed at the beginning of wrapped lines. Also see # the ``$smart_wrap'' variable. # # # set mask="!^\\.[^.]" # # Name: mask # Type: regular expression # Default: "!^\\.[^.]" # # # A regular expression used in the file browser, optionally preceded by # the not operator ``!''. Only files whose names match this mask # will be shown. The match is always case-sensitive. # # # set mbox="~/mbox" # # Name: mbox # Type: path # Default: "~/mbox" # # # This specifies the folder into which read mail in your ``$spoolfile'' # folder will be appended. # # # set sidebar_visible=no # # Name: sidebar_visible # Type: boolean # Default: no # # # This specifies whether or not to show the mailbox list pane. # # # set sidebar_width=0 # # Name: sidebar_width # Type: number # Default: 0 # # # The width of the mailbox list pane (left sidebar like in GUIs). # # # set mbox_type=mbox # # Name: mbox_type # Type: folder magic # Default: mbox # # # The default mailbox type used when creating new folders. May be any of # mbox, MMDF, MH and Maildir. # # # set metoo=no # # Name: metoo # Type: boolean # Default: no # # # If unset, Mutt will remove your address (see the ``alternates'' # command) from the list of recipients when replying to a message. # # # set menu_context=0 # # Name: menu_context # Type: number # Default: 0 # # # This variable controls the number of lines of context that are given # when scrolling through menus. (Similar to ``$pager_context''.) # # # set menu_scroll=no # # Name: menu_scroll # Type: boolean # Default: no # # # When set, menus will be scrolled up or down one line when you # attempt to move across a screen boundary. If unset, the screen # is cleared and the next or previous page of the menu is displayed # (useful for slow links to avoid many redraws). # # # set meta_key=no # # Name: meta_key # Type: boolean # Default: no # # # If set, forces Mutt to interpret keystrokes with the high bit (bit 8) # set as if the user had pressed the ESC key and whatever key remains # after having the high bit removed. For example, if the key pressed # has an ASCII value of 0xf4, then this is treated as if the user had # pressed ESC then ``x''. This is because the result of removing the # high bit from ``0xf4'' is ``0x74'', which is the ASCII character # ``x''. # # # set mh_purge=no # # Name: mh_purge # Type: boolean # Default: no # # # When unset, mutt will mimic mh's behaviour and rename deleted messages # to , in mh folders instead of really deleting # them. If the variable is set, the message files will simply be # deleted. # # # set mh_seq_flagged="flagged" # # Name: mh_seq_flagged # Type: string # Default: "flagged" # # # The name of the MH sequence used for flagged messages. # # # set mh_seq_replied="replied" # # Name: mh_seq_replied # Type: string # Default: "replied" # # # The name of the MH sequence used to tag replied messages. # # # set mh_seq_unseen="unseen" # # Name: mh_seq_unseen # Type: string # Default: "unseen" # # # The name of the MH sequence used for unseen messages. # # # set mime_forward=no # # Name: mime_forward # Type: quadoption # Default: no # # # When set, the message you are forwarding will be attached as a # separate MIME part instead of included in the main body of the # message. This is useful for forwarding MIME messages so the receiver # can properly view the message as it was delivered to you. If you like # to switch between MIME and not MIME from mail to mail, set this # variable to ask-no or ask-yes. # # Also see ``$forward_decode'' and ``$mime_forward_decode''. # # # set mime_forward_decode=no # # Name: mime_forward_decode # Type: boolean # Default: no # # # Controls the decoding of complex MIME messages into text/plain when # forwarding a message while ``$mime_forward'' is set. Otherwise # ``$forward_decode'' is used instead. # # # set mime_forward_rest=yes # # Name: mime_forward_rest # Type: quadoption # Default: yes # # # When forwarding multiple attachments of a MIME message from the recvattach # menu, attachments which cannot be decoded in a reasonable manner will # be attached to the newly composed message if this option is set. # # # set mime_subject=yes # # Name: mime_subject # Type: boolean # Default: yes # # # If unset, 8-bit ``subject:'' line in article header will not be # encoded according to RFC2047 to base64. This is useful when message # is Usenet article, because MIME for news is nonstandard feature. # # # set mix_entry_format="%4n %c %-16s %a" # # Name: mix_entry_format # Type: string # Default: "%4n %c %-16s %a" # # # This variable describes the format of a remailer line on the mixmaster # chain selection screen. The following printf-like sequences are # supported: # # %n The running number on the menu. # %c Remailer capabilities. # %s The remailer's short name. # %a The remailer's e-mail address. # # # set mixmaster="mixmaster" # # Name: mixmaster # Type: path # Default: "mixmaster" # # # This variable contains the path to the Mixmaster binary on your # system. It is used with various sets of parameters to gather the # list of known remailers, and to finally send a message through the # mixmaster chain. # # # set move=ask-no # # Name: move # Type: quadoption # Default: ask-no # # # Controls whether or not Mutt will move read messages # from your spool mailbox to your ``$mbox'' mailbox, or as a result of # a ``mbox-hook'' command. # # # set message_format="%s" # # Name: message_format # Type: string # Default: "%s" # # # This is the string displayed in the ``attachment'' menu for # attachments of type message/rfc822. For a full listing of defined # printf()-like sequences see the section on ``$index_format''. # # # set narrow_tree=no # # Name: narrow_tree # Type: boolean # Default: no # # # This variable, when set, makes the thread tree narrower, allowing # deeper threads to fit on the screen. # # # set news_cache_dir="~/.mutt" # # Name: news_cache_dir # Type: path # Default: "~/.mutt" # # # This variable pointing to directory where Mutt will save cached news # articles headers in. If unset, headers will not be saved at all # and will be reloaded each time when you enter to newsgroup. # # # set news_server="" # # Name: news_server # Type: string # Default: "" # # # This variable specifies domain name or address of NNTP server. It # defaults to the newsserver specified in the environment variable # $NNTPSERVER or contained in the file /etc/nntpserver. You can also # specify username and an alternative port for each newsserver, ie: # # [nntp[s]://][username[:password]@]newsserver[:port] # # # set newsrc="~/.newsrc" # # Name: newsrc # Type: path # Default: "~/.newsrc" # # # The file, containing info about subscribed newsgroups - names and # indexes of read articles. The following printf-style sequence # is understood: # # %s newsserver name # # # set nntp_context=1000 # # Name: nntp_context # Type: number # Default: 1000 # # # This variable defines number of articles which will be in index when # newsgroup entered. If active newsgroup have more articles than this # number, oldest articles will be ignored. Also controls how many # articles headers will be saved in cache when you quit newsgroup. # # # set nntp_load_description=yes # # Name: nntp_load_description # Type: boolean # Default: yes # # # This variable controls whether or not descriptions for each newsgroup # must be loaded when newsgroup is added to list (first time list # loading or new newsgroup adding). # # # set nntp_user="" # # Name: nntp_user # Type: string # Default: "" # # # Your login name on the NNTP server. If unset and NNTP server requires # authentification, Mutt will prompt you for your account name when you # connect to newsserver. # # # set nntp_pass="" # # Name: nntp_pass # Type: string # Default: "" # # # Your password for NNTP account. # # # set nntp_poll=60 # # Name: nntp_poll # Type: number # Default: 60 # # # The time in seconds until any operations on newsgroup except post new # article will cause recheck for new news. If set to 0, Mutt will # recheck newsgroup on each operation in index (stepping, read article, # etc.). # # # set nntp_reconnect=ask-yes # # Name: nntp_reconnect # Type: quadoption # Default: ask-yes # # # Controls whether or not Mutt will try to reconnect to newsserver when # connection lost. # # # set pager="builtin" # # Name: pager # Type: path # Default: "builtin" # # # This variable specifies which pager you would like to use to view # messages. builtin means to use the builtin pager, otherwise this # variable should specify the pathname of the external pager you would # like to use. # # Using an external pager may have some disadvantages: Additional # keystrokes are necessary because you can't call mutt functions # directly from the pager, and screen resizes cause lines longer than # the screen width to be badly formatted in the help menu. # # # set pager_context=0 # # Name: pager_context # Type: number # Default: 0 # # # This variable controls the number of lines of context that are given # when displaying the next or previous page in the internal pager. By # default, Mutt will display the line after the last one on the screen # at the top of the next page (0 lines of context). # # # set pager_format="-%Z- %C/%m: %-20.20n %s" # # Name: pager_format # Type: string # Default: "-%Z- %C/%m: %-20.20n %s" # # # This variable controls the format of the one-line message ``status'' # displayed before each message in either the internal or an external # pager. The valid sequences are listed in the ``$index_format'' # section. # # # set pager_index_lines=0 # # Name: pager_index_lines # Type: number # Default: 0 # # # Determines the number of lines of a mini-index which is shown when in # the pager. The current message, unless near the top or bottom of the # folder, will be roughly one third of the way down this mini-index, # giving the reader the context of a few messages before and after the # message. This is useful, for example, to determine how many messages # remain to be read in the current thread. One of the lines is reserved # for the status bar from the index, so a pager_index_lines of 6 # will only show 5 lines of the actual index. A value of 0 results in # no index being shown. If the number of messages in the current folder # is less than pager_index_lines, then the index will only use as # many lines as it needs. # # # set pager_stop=no # # Name: pager_stop # Type: boolean # Default: no # # # When set, the internal-pager will not move to the next message # when you are at the end of a message and invoke the next-page # function. # # # set crypt_autosign=no # # Name: crypt_autosign # Type: boolean # Default: no # # # Setting this variable will cause Mutt to always attempt to # cryptographically sign outgoing messages. This can be overridden # by use of the pgp-menu, when signing is not required or # encryption is requested as well. If ``$smime_is_default'' is set, # then OpenSSL is used instead to create S/MIME messages and settings can # be overridden by use of the smime-menu. # (Crypto only) # # # set crypt_autoencrypt=no # # Name: crypt_autoencrypt # Type: boolean # Default: no # # # Setting this variable will cause Mutt to always attempt to PGP # encrypt outgoing messages. This is probably only useful in # connection to the send-hook command. It can be overridden # by use of the pgp-menu, when encryption is not required or # signing is requested as well. IF ``$smime_is_default'' is set, # then OpenSSL is used instead to create S/MIME messages and # settings can be overridden by use of the smime-menu. # (Crypto only) # # # set pgp_ignore_subkeys=yes # # Name: pgp_ignore_subkeys # Type: boolean # Default: yes # # # Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead, # the principal key will inherit the subkeys' capabilities. Unset this # if you want to play interesting key selection games. # (PGP only) # # # set crypt_replyencrypt=yes # # Name: crypt_replyencrypt # Type: boolean # Default: yes # # # If set, automatically PGP or OpenSSL encrypt replies to messages which are # encrypted. # (Crypto only) # # # set crypt_replysign=no # # Name: crypt_replysign # Type: boolean # Default: no # # # If set, automatically PGP or OpenSSL sign replies to messages which are # signed. # # Note: this does not work on messages that are encrypted # and signed! # (Crypto only) # # # set crypt_replysignencrypted=no # # Name: crypt_replysignencrypted # Type: boolean # Default: no # # # If set, automatically PGP or OpenSSL sign replies to messages # which are encrypted. This makes sense in combination with # ``$crypt_replyencrypt'', because it allows you to sign all # messages which are automatically encrypted. This works around # the problem noted in ``$crypt_replysign'', that mutt is not able # to find out whether an encrypted message is also signed. # (Crypto only) # # # set crypt_timestamp=yes # # Name: crypt_timestamp # Type: boolean # Default: yes # # # If set, mutt will include a time stamp in the lines surrounding # PGP or S/MIME output, so spoofing such lines is more difficult. # If you are using colors to mark these lines, and rely on these, # you may unset this setting. # (Crypto only) # # # set pgp_use_gpg_agent=no # # Name: pgp_use_gpg_agent # Type: boolean # Default: no # # # If set, mutt will use a possibly-running gpg-agent process. # (PGP only) # # # set crypt_verify_sig=yes # # Name: crypt_verify_sig # Type: quadoption # Default: yes # # # If ``yes'', always attempt to verify PGP or S/MIME signatures. # If ``ask'', ask whether or not to verify the signature. # If ``no'', never attempt to verify cryptographic signatures. # (Crypto only) # # # set smime_is_default=no # # Name: smime_is_default # Type: boolean # Default: no # # # The default behaviour of mutt is to use PGP on all auto-sign/encryption # operations. To override and to use OpenSSL instead this must be set. # However, this has no effect while replying, since mutt will automatically # select the same application that was used to sign/encrypt the original # message. (Note that this variable can be overridden by unsetting $crypt_autosmime.) # (S/MIME only) # # # set smime_ask_cert_label=yes # # Name: smime_ask_cert_label # Type: boolean # Default: yes # # # This flag controls whether you want to be asked to enter a label # for a certificate about to be added to the database or not. It is # set by default. # (S/MIME only) # # # set smime_decrypt_use_default_key=yes # # Name: smime_decrypt_use_default_key # Type: boolean # Default: yes # # # If set (default) this tells mutt to use the default key for decryption. Otherwise, # if manage multiple certificate-key-pairs, mutt will try to use the mailbox-address # to determine the key to use. It will ask you to supply a key, if it can't find one. # (S/MIME only) # # # set pgp_entry_format="%4n %t%f %4l/0x%k %-4a %2c %u" # # Name: pgp_entry_format # Type: string # Default: "%4n %t%f %4l/0x%k %-4a %2c %u" # # # This variable allows you to customize the PGP key selection menu to # your personal taste. This string is similar to ``$index_format'', but # has its own set of printf()-like sequences: # # %n number # %k key id # %u user id # %a algorithm # %l key length # %f flags # %c capabilities # %t trust/validity of the key-uid association # %[] date of the key where is an strftime(3) expression # # # (PGP only) # # # set pgp_good_sign="" # # Name: pgp_good_sign # Type: regular expression # Default: "" # # # If you assign a text to this variable, then a PGP signature is only # considered verified if the output from $pgp_verify_command contains # the text. Use this variable if the exit code from the command is 0 # even for bad signatures. # (PGP only) # # # set pgp_check_exit=yes # # Name: pgp_check_exit # Type: boolean # Default: yes # # # If set, mutt will check the exit code of the PGP subprocess when # signing or encrypting. A non-zero exit code means that the # subprocess failed. # (PGP only) # # # set pgp_long_ids=no # # Name: pgp_long_ids # Type: boolean # Default: no # # # If set, use 64 bit PGP key IDs. Unset uses the normal 32 bit Key IDs. # (PGP only) # # # set pgp_retainable_sigs=no # # Name: pgp_retainable_sigs # Type: boolean # Default: no # # # If set, signed and encrypted messages will consist of nested # multipart/signed and multipart/encrypted body parts. # # This is useful for applications like encrypted and signed mailing # lists, where the outer layer (multipart/encrypted) can be easily # removed, while the inner multipart/signed part is retained. # (PGP only) # # # set pgp_autoinline=no # # Name: pgp_autoinline # Type: boolean # Default: no # # # This option controls whether Mutt generates old-style inline # (traditional) PGP encrypted or signed messages under certain # circumstances. This can be overridden by use of the pgp-menu, # when inline is not required. # # Note that Mutt might automatically use PGP/MIME for messages # which consist of more than a single MIME part. Mutt can be # configured to ask before sending PGP/MIME messages when inline # (traditional) would not work. # See also: ``$pgp_mime_auto''. # # Also note that using the old-style PGP message format is strongly # deprecated. # (PGP only) # # # set pgp_replyinline=no # # Name: pgp_replyinline # Type: boolean # Default: no # # # Setting this variable will cause Mutt to always attempt to # create an inline (traditional) message when replying to a # message which is PGP encrypted/signed inline. This can be # overridden by use of the pgp-menu, when inline is not # required. This option does not automatically detect if the # (replied-to) message is inline; instead it relies on Mutt # internals for previously checked/flagged messages. # # Note that Mutt might automatically use PGP/MIME for messages # which consist of more than a single MIME part. Mutt can be # configured to ask before sending PGP/MIME messages when inline # (traditional) would not work. # See also: ``$pgp_mime_auto''. # # Also note that using the old-style PGP message format is strongly # deprecated. # (PGP only) # # # set pgp_show_unusable=yes # # Name: pgp_show_unusable # Type: boolean # Default: yes # # # If set, mutt will display non-usable keys on the PGP key selection # menu. This includes keys which have been revoked, have expired, or # have been marked as ``disabled'' by the user. # (PGP only) # # # set pgp_sign_as="" # # Name: pgp_sign_as # Type: string # Default: "" # # # If you have more than one key pair, this option allows you to specify # which of your private keys to use. It is recommended that you use the # keyid form to specify your key (e.g., ``0x00112233''). # (PGP only) # # # set pgp_strict_enc=yes # # Name: pgp_strict_enc # Type: boolean # Default: yes # # # If set, Mutt will automatically encode PGP/MIME signed messages as # quoted-printable. Please note that unsetting this variable may # lead to problems with non-verifyable PGP signatures, so only change # this if you know what you are doing. # (PGP only) # # # set pgp_timeout=300 # # Name: pgp_timeout # Type: number # Default: 300 # # # The number of seconds after which a cached passphrase will expire if # not used. # (PGP only) # # # set pgp_sort_keys=address # # Name: pgp_sort_keys # Type: sort order # Default: address # # # Specifies how the entries in the `pgp keys' menu are sorted. The # following are legal values: # # address sort alphabetically by user id # keyid sort alphabetically by key id # date sort by key creation date # trust sort by the trust of the key # # # If you prefer reverse order of the above values, prefix it with # `reverse-'. # (PGP only) # # # set pgp_mime_auto=ask-yes # # Name: pgp_mime_auto # Type: quadoption # Default: ask-yes # # # This option controls whether Mutt will prompt you for # automatically sending a (signed/encrypted) message using # PGP/MIME when inline (traditional) fails (for any reason). # # Also note that using the old-style PGP message format is strongly # deprecated. # (PGP only) # # # set pgp_auto_decode=no # # Name: pgp_auto_decode # Type: boolean # Default: no # # # If set, mutt will automatically attempt to decrypt traditional PGP # messages whenever the user performs an operation which ordinarily would # result in the contents of the message being operated on. For example, # if the user displays a pgp-traditional message which has not been manually # checked with the check-traditional-pgp function, mutt will automatically # check the message for traditional pgp. # # # set pgp_decode_command="" # # Name: pgp_decode_command # Type: string # Default: "" # # # This format strings specifies a command which is used to decode # application/pgp attachments. # # The PGP command formats have their own set of printf-like sequences: # # %p Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty # string otherwise. Note: This may be used with a %? construct. # %f Expands to the name of a file containing a message. # %s Expands to the name of a file containing the signature part # of a multipart/signed attachment when verifying it. # %a The value of $pgp_sign_as. # %r One or more key IDs. # # # For examples on how to configure these formats for the various versions # of PGP which are floating around, see the pgp*.rc and gpg.rc files in # the samples/ subdirectory which has been installed on your system # alongside the documentation. # (PGP only) # # # set pgp_getkeys_command="" # # Name: pgp_getkeys_command # Type: string # Default: "" # # # This command is invoked whenever mutt will need public key information. # %r is the only printf-like sequence used with this format. # (PGP only) # # # set pgp_verify_command="" # # Name: pgp_verify_command # Type: string # Default: "" # # # This command is used to verify PGP signatures. # (PGP only) # # # set pgp_decrypt_command="" # # Name: pgp_decrypt_command # Type: string # Default: "" # # # This command is used to decrypt a PGP encrypted message. # (PGP only) # # # set pgp_clearsign_command="" # # Name: pgp_clearsign_command # Type: string # Default: "" # # # This format is used to create a old-style "clearsigned" PGP # message. Note that the use of this format is strongly # deprecated. # (PGP only) # # # set pgp_sign_command="" # # Name: pgp_sign_command # Type: string # Default: "" # # # This command is used to create the detached PGP signature for a # multipart/signed PGP/MIME body part. # (PGP only) # # # set pgp_encrypt_sign_command="" # # Name: pgp_encrypt_sign_command # Type: string # Default: "" # # # This command is used to both sign and encrypt a body part. # (PGP only) # # # set pgp_encrypt_only_command="" # # Name: pgp_encrypt_only_command # Type: string # Default: "" # # # This command is used to encrypt a body part without signing it. # (PGP only) # # # set pgp_import_command="" # # Name: pgp_import_command # Type: string # Default: "" # # # This command is used to import a key from a message into # the user's public key ring. # (PGP only) # # # set pgp_export_command="" # # Name: pgp_export_command # Type: string # Default: "" # # # This command is used to export a public key from the user's # key ring. # (PGP only) # # # set pgp_verify_key_command="" # # Name: pgp_verify_key_command # Type: string # Default: "" # # # This command is used to verify key information from the key selection # menu. # (PGP only) # # # set pgp_list_secring_command="" # # Name: pgp_list_secring_command # Type: string # Default: "" # # # This command is used to list the secret key ring's contents. The # output format must be analogous to the one used by # gpg --list-keys --with-colons. # # This format is also generated by the pgpring utility which comes # with mutt. # (PGP only) # # # set pgp_list_pubring_command="" # # Name: pgp_list_pubring_command # Type: string # Default: "" # # # This command is used to list the public key ring's contents. The # output format must be analogous to the one used by # gpg --list-keys --with-colons. # # This format is also generated by the pgpring utility which comes # with mutt. # (PGP only) # # # set forward_decrypt=yes # # Name: forward_decrypt # Type: boolean # Default: yes # # # Controls the handling of encrypted messages when forwarding a message. # When set, the outer layer of encryption is stripped off. This # variable is only used if ``$mime_forward'' is set and # ``$mime_forward_decode'' is unset. # (PGP only) # # # set smime_timeout=300 # # Name: smime_timeout # Type: number # Default: 300 # # # The number of seconds after which a cached passphrase will expire if # not used. # (S/MIME only) # # # set smime_encrypt_with="" # # Name: smime_encrypt_with # Type: string # Default: "" # # # This sets the algorithm that should be used for encryption. # Valid choices are "des", "des3", "rc2-40", "rc2-64", "rc2-128". # If unset "3des" (TripleDES) is used. # (S/MIME only) # # # set smime_keys="" # # Name: smime_keys # Type: path # Default: "" # # # Since there is no pubring/secring as with PGP, mutt has to handle # storage ad retrieval of keys/certs by itself. This is very basic right now, # and stores keys and certificates in two different directories, both # named as the hash-value retrieved from OpenSSL. There is an index file # which contains mailbox-address keyid pair, and which can be manually # edited. This one points to the location of the private keys. # (S/MIME only) # # # set smime_ca_location="" # # Name: smime_ca_location # Type: path # Default: "" # # # This variable contains the name of either a directory, or a file which # contains trusted certificates for use with OpenSSL. # (S/MIME only) # # # set smime_certificates="" # # Name: smime_certificates # Type: path # Default: "" # # # Since there is no pubring/secring as with PGP, mutt has to handle # storage and retrieval of keys by itself. This is very basic right # now, and keys and certificates are stored in two different # directories, both named as the hash-value retrieved from # OpenSSL. There is an index file which contains mailbox-address # keyid pairs, and which can be manually edited. This one points to # the location of the certificates. # (S/MIME only) # # # set smime_decrypt_command="" # # Name: smime_decrypt_command # Type: string # Default: "" # # # This format string specifies a command which is used to decrypt # application/x-pkcs7-mime attachments. # # The OpenSSL command formats have their own set of printf-like sequences # similar to PGP's: # # %f Expands to the name of a file containing a message. # %s Expands to the name of a file containing the signature part # of a multipart/signed attachment when verifying it. # %k The key-pair specified with $smime_default_key # %c One or more certificate IDs. # %a The algorithm used for encryption. # %C CA location: Depending on whether $smime_ca_location # points to a directory or file, this expands to # "-CApath $smime_ca_location" or "-CAfile $smime_ca_location". # # # For examples on how to configure these formats, see the smime.rc in # the samples/ subdirectory which has been installed on your system # alongside the documentation. # (S/MIME only) # # # set smime_verify_command="" # # Name: smime_verify_command # Type: string # Default: "" # # # This command is used to verify S/MIME signatures of type multipart/signed. # (S/MIME only) # # # set smime_verify_opaque_command="" # # Name: smime_verify_opaque_command # Type: string # Default: "" # # # This command is used to verify S/MIME signatures of type # application/x-pkcs7-mime. # (S/MIME only) # # # set smime_sign_command="" # # Name: smime_sign_command # Type: string # Default: "" # # # This command is used to created S/MIME signatures of type # multipart/signed, which can be read by all mail clients. # (S/MIME only) # # # set smime_sign_opaque_command="" # # Name: smime_sign_opaque_command # Type: string # Default: "" # # # This command is used to created S/MIME signatures of type # application/x-pkcs7-signature, which can only be handled by mail # clients supporting the S/MIME extension. # (S/MIME only) # # # set smime_encrypt_command="" # # Name: smime_encrypt_command # Type: string # Default: "" # # # This command is used to create encrypted S/MIME messages. # (S/MIME only) # # # set smime_pk7out_command="" # # Name: smime_pk7out_command # Type: string # Default: "" # # # This command is used to extract PKCS7 structures of S/MIME signatures, # in order to extract the public X509 certificate(s). # (S/MIME only) # # # set smime_get_cert_command="" # # Name: smime_get_cert_command # Type: string # Default: "" # # # This command is used to extract X509 certificates from a PKCS7 structure. # (S/MIME only) # # # set smime_get_signer_cert_command="" # # Name: smime_get_signer_cert_command # Type: string # Default: "" # # # This command is used to extract only the signers X509 certificate from a S/MIME # signature, so that the certificate's owner may get compared to the # email's 'From'-field. # (S/MIME only) # # # set smime_import_cert_command="" # # Name: smime_import_cert_command # Type: string # Default: "" # # # This command is used to import a certificate via smime_keys. # (S/MIME only) # # # set smime_get_cert_email_command="" # # Name: smime_get_cert_email_command # Type: string # Default: "" # # # This command is used to extract the mail address(es) used for storing # X509 certificates, and for verification purposes (to check whether the # certificate was issued for the sender's mailbox). # (S/MIME only) # # # set smime_default_key="" # # Name: smime_default_key # Type: string # Default: "" # # # This is the default key-pair to use for signing. This must be set to the # keyid (the hash-value that OpenSSL generates) to work properly # (S/MIME only) # # # set ssl_client_cert="" # # Name: ssl_client_cert # Type: path # Default: "" # # # The file containing a client certificate and its associated private # key. # # # set ssl_starttls=yes # # Name: ssl_starttls # Type: quadoption # Default: yes # # # If set (the default), mutt will attempt to use STARTTLS on servers # advertising the capability. When unset, mutt will not attempt to # use STARTTLS regardless of the server's capabilities. # # # set certificate_file="~/.mutt_certificates" # # Name: certificate_file # Type: path # Default: "~/.mutt_certificates" # # # This variable specifies the file where the certificates you trust # are saved. When an unknown certificate is encountered, you are asked # if you accept it or not. If you accept it, the certificate can also # be saved in this file and further connections are automatically # accepted. # # You can also manually add CA certificates in this file. Any server # certificate that is signed with one of these CA certificates are # also automatically accepted. # # Example: set certificate_file=~/.mutt/certificates # # # set ssl_usesystemcerts=yes # # Name: ssl_usesystemcerts # Type: boolean # Default: yes # # # If set to yes, mutt will use CA certificates in the # system-wide certificate store when checking if server certificate # is signed by a trusted CA. # # # set entropy_file="" # # Name: entropy_file # Type: path # Default: "" # # # The file which includes random data that is used to initialize SSL # library functions. # # # set ssl_use_sslv2=yes # # Name: ssl_use_sslv2 # Type: boolean # Default: yes # # # This variables specifies whether to attempt to use SSLv2 in the # SSL authentication process. # # # set ssl_use_sslv3=yes # # Name: ssl_use_sslv3 # Type: boolean # Default: yes # # # This variables specifies whether to attempt to use SSLv3 in the # SSL authentication process. # # # set ssl_use_tlsv1=yes # # Name: ssl_use_tlsv1 # Type: boolean # Default: yes # # # This variables specifies whether to attempt to use TLSv1 in the # SSL authentication process. # # # set pipe_split=no # # Name: pipe_split # Type: boolean # Default: no # # # Used in connection with the pipe-message command and the ``tag- # prefix'' operator. If this variable is unset, when piping a list of # tagged messages Mutt will concatenate the messages and will pipe them # as a single folder. When set, Mutt will pipe the messages one by one. # In both cases the messages are piped in the current sorted order, # and the ``$pipe_sep'' separator is added after each message. # # # set pipe_decode=no # # Name: pipe_decode # Type: boolean # Default: no # # # Used in connection with the pipe-message command. When unset, # Mutt will pipe the messages without any preprocessing. When set, Mutt # will weed headers and will attempt to PGP/MIME decode the messages # first. # # # set pipe_sep="\n" # # Name: pipe_sep # Type: string # Default: "\n" # # # The separator to add between messages when piping a list of tagged # messages to an external Unix command. # # # set pop_authenticators="" # # Name: pop_authenticators # Type: string # Default: "" # # # This is a colon-delimited list of authentication methods mutt may # attempt to use to log in to an POP server, in the order mutt should # try them. Authentication methods are either 'user', 'apop' or any # SASL mechanism, eg 'digest-md5', 'gssapi' or 'cram-md5'. # This parameter is case-insensitive. If this parameter is unset # (the default) mutt will try all available methods, in order from # most-secure to least-secure. # # Example: set pop_authenticators="digest-md5:apop:user" # # # set pop_auth_try_all=yes # # Name: pop_auth_try_all # Type: boolean # Default: yes # # # If set, Mutt will try all available methods. When unset, Mutt will # only fall back to other authentication methods if the previous # methods are unavailable. If a method is available but authentication # fails, Mutt will not connect to the POP server. # # # set pop_checkinterval=60 # # Name: pop_checkinterval # Type: number # Default: 60 # # # This variable configures how often (in seconds) POP should look for # new mail. # # # set pop_delete=ask-no # # Name: pop_delete # Type: quadoption # Default: ask-no # # # If set, Mutt will delete successfully downloaded messages from the POP # server when using the fetch-mail function. When unset, Mutt will # download messages but also leave them on the POP server. # # # set pop_host="" # # Name: pop_host # Type: string # Default: "" # # # The name of your POP server for the fetch-mail function. You # can also specify an alternative port, username and password, ie: # # [pop[s]://][username[:password]@]popserver[:port] # # # set pop_last=no # # Name: pop_last # Type: boolean # Default: no # # # If this variable is set, mutt will try to use the "LAST" POP command # for retrieving only unread messages from the POP server when using # the fetch-mail function. # # # set pop_reconnect=ask-yes # # Name: pop_reconnect # Type: quadoption # Default: ask-yes # # # Controls whether or not Mutt will try to reconnect to POP server when # connection lost. # # # set pop_user="" # # Name: pop_user # Type: string # Default: "" # # # Your login name on the POP server. # # This variable defaults to your user name on the local machine. # # # set pop_pass="" # # Name: pop_pass # Type: string # Default: "" # # # Specifies the password for your POP account. If unset, Mutt will # prompt you for your password when you open POP mailbox. # Warning: you should only use this option when you are on a # fairly secure machine, because the superuser can read your muttrc # even if you are the only one who can read the file. # # # set post_indent_string="" # # Name: post_indent_string # Type: string # Default: "" # # # Similar to the ``$attribution'' variable, Mutt will append this # string after the inclusion of a message which is being replied to. # # # set post_moderated=ask-yes # # Name: post_moderated # Type: quadoption # Default: ask-yes # # # If set to yes, Mutt will post article to newsgroup that have # not permissions to posting (e.g. moderated). Note: if newsserver # does not support posting to that newsgroup or totally read-only, that # posting will not have an effect. # # # set postpone=ask-yes # # Name: postpone # Type: quadoption # Default: ask-yes # # # Controls whether or not messages are saved in the ``$postponed'' # mailbox when you elect not to send immediately. # # # set postponed="~/postponed" # # Name: postponed # Type: path # Default: "~/postponed" # # # Mutt allows you to indefinitely ``postpone sending a message'' which # you are editing. When you choose to postpone a message, Mutt saves it # in the mailbox specified by this variable. Also see the ``$postpone'' # variable. # # # set preconnect="" # # Name: preconnect # Type: string # Default: "" # # # If set, a shell command to be executed if mutt fails to establish # a connection to the server. This is useful for setting up secure # connections, e.g. with ssh(1). If the command returns a nonzero # status, mutt gives up opening the server. Example: # # preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net # sleep 20 < /dev/null > /dev/null" # # Mailbox 'foo' on mailhost.net can now be reached # as '{localhost:1234}foo'. # # NOTE: For this example to work, you must be able to log in to the # remote machine without having to enter a password. # # # set print=ask-no # # Name: print # Type: quadoption # Default: ask-no # # # Controls whether or not Mutt really prints messages. # This is set to ask-no by default, because some people # accidentally hit ``p'' often (like me). # # # set print_command="lpr" # # Name: print_command # Type: path # Default: "lpr" # # # This specifies the command pipe that should be used to print messages. # # # set print_decode=yes # # Name: print_decode # Type: boolean # Default: yes # # # Used in connection with the print-message command. If this # option is set, the message is decoded before it is passed to the # external command specified by $print_command. If this option # is unset, no processing will be applied to the message when # printing it. The latter setting may be useful if you are using # some advanced printer filter which is able to properly format # e-mail messages for printing. # # # set print_split=no # # Name: print_split # Type: boolean # Default: no # # # Used in connection with the print-message command. If this option # is set, the command specified by $print_command is executed once for # each message which is to be printed. If this option is unset, # the command specified by $print_command is executed only once, and # all the messages are concatenated, with a form feed as the message # separator. # # Those who use the enscript(1) program's mail-printing mode will # most likely want to set this option. # # # set prompt_after=yes # # Name: prompt_after # Type: boolean # Default: yes # # # If you use an external ``$pager'', setting this variable will # cause Mutt to prompt you for a command when the pager exits rather # than returning to the index menu. If unset, Mutt will return to the # index menu when the external pager exits. # # # set query_command="" # # Name: query_command # Type: path # Default: "" # # # This specifies the command that mutt will use to make external address # queries. The string should contain a %s, which will be substituted # with the query string the user types. See ``query'' for more # information. # # # set quit=yes # # Name: quit # Type: quadoption # Default: yes # # # This variable controls whether ``quit'' and ``exit'' actually quit # from mutt. If it set to yes, they do quit, if it is set to no, they # have no effect, and if it is set to ask-yes or ask-no, you are # prompted for confirmation when you try to quit. # # # set quote_regexp="^([ \t]*[|>:}#])+" # # Name: quote_regexp # Type: regular expression # Default: "^([ \t]*[|>:}#])+" # # # A regular expression used in the internal-pager to determine quoted # sections of text in the body of a message. # # Note: In order to use the quotedx patterns in the # internal pager, you need to set this to a regular expression that # matches exactly the quote characters at the beginning of quoted # lines. # # # set read_inc=10 # # Name: read_inc # Type: number # Default: 10 # # # If set to a value greater than 0, Mutt will display which message it # is currently on when reading a mailbox. The message is printed after # read_inc messages have been read (e.g., if set to 25, Mutt will # print a message when it reads message 25, and then again when it gets # to message 50). This variable is meant to indicate progress when # reading large mailboxes which may take some time. # When set to 0, only a single message will appear before the reading # the mailbox. # # Also see the ``$write_inc'' variable. # # # set read_only=no # # Name: read_only # Type: boolean # Default: no # # # If set, all folders are opened in read-only mode. # # # set realname="" # # Name: realname # Type: string # Default: "" # # # This variable specifies what "real" or "personal" name should be used # when sending messages. # # By default, this is the GECOS field from /etc/passwd. Note that this # variable will not be used when the user has set a real name # in the $from variable. # # # set recall=ask-yes # # Name: recall # Type: quadoption # Default: ask-yes # # # Controls whether or not Mutt recalls postponed messages # when composing a new message. Also see ``$postponed''. # # Setting this variable to ``yes'' is not generally useful, and thus not # recommended. # # # set record="" # # Name: record # Type: path # Default: "" # # # This specifies the file into which your outgoing messages should be # appended. (This is meant as the primary method for saving a copy of # your messages, but another way to do this is using the ``my_hdr'' # command to create a Bcc: field with your email address in it.) # # The value of $record is overridden by the ``$force_name'' and # ``$save_name'' variables, and the ``fcc-hook'' command. # # # set reply_regexp="^(re([\\[0-9\\]+])*|aw):[ \t]*" # # Name: reply_regexp # Type: regular expression # Default: "^(re([\\[0-9\\]+])*|aw):[ \t]*" # # # A regular expression used to recognize reply messages when threading # and replying. The default value corresponds to the English "Re:" and # the German "Aw:". # # # set reply_self=no # # Name: reply_self # Type: boolean # Default: no # # # If unset and you are replying to a message sent by you, Mutt will # assume that you want to reply to the recipients of that message rather # than to yourself. # # # set reply_to=ask-yes # # Name: reply_to # Type: quadoption # Default: ask-yes # # # If set, when replying to a message, Mutt will use the address listed # in the Reply-to: header as the recipient of the reply. If unset, # it will use the address in the From: header field instead. This # option is useful for reading a mailing list that sets the Reply-To: # header field to the list address and you want to send a private # message to the author of a message. # # # set resolve=yes # # Name: resolve # Type: boolean # Default: yes # # # When set, the cursor will be automatically advanced to the next # (possibly undeleted) message whenever a command that modifies the # current message is executed. # # # set reverse_alias=no # # Name: reverse_alias # Type: boolean # Default: no # # # This variable controls whether or not Mutt will display the "personal" # name from your aliases in the index menu if it finds an alias that # matches the message's sender. For example, if you have the following # alias: # # alias juser abd30425@somewhere.net (Joe User) # # and then you receive mail which contains the following header: # # From: abd30425@somewhere.net # # It would be displayed in the index menu as ``Joe User'' instead of # ``abd30425@somewhere.net.'' This is useful when the person's e-mail # address is not human friendly (like CompuServe addresses). # # # set reverse_name=no # # Name: reverse_name # Type: boolean # Default: no # # # It may sometimes arrive that you receive mail to a certain machine, # move the messages to another machine, and reply to some the messages # from there. If this variable is set, the default From: line of # the reply messages is built using the address where you received the # messages you are replying to if that address matches your # alternates. If the variable is unset, or the address that would be # used doesn't match your alternates, the From: line will use # your address on the current machine. # # # set reverse_realname=yes # # Name: reverse_realname # Type: boolean # Default: yes # # # This variable fine-tunes the behaviour of the reverse_name feature. # When it is set, mutt will use the address from incoming messages as-is, # possibly including eventual real names. When it is unset, mutt will # override any such real names with the setting of the realname variable. # # # set rfc2047_parameters=no # # Name: rfc2047_parameters # Type: boolean # Default: no # # # When this variable is set, Mutt will decode RFC-2047-encoded MIME # parameters. You want to set this variable when mutt suggests you # to save attachments to files named like this: # =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?= # # When this variable is set interactively, the change doesn't have # the desired effect before you have changed folders. # # Note that this use of RFC 2047's encoding is explicitly, # prohibited by the standard, but nevertheless encountered in the # wild. # Also note that setting this parameter will not have the effect # that mutt generates this kind of encoding. Instead, mutt will # unconditionally use the encoding specified in RFC 2231. # # # set save_address=no # # Name: save_address # Type: boolean # Default: no # # # If set, mutt will take the sender's full address when choosing a # default folder for saving a mail. If ``$save_name'' or ``$force_name'' # is set too, the selection of the fcc folder will be changed as well. # # # set save_empty=yes # # Name: save_empty # Type: boolean # Default: yes # # # When unset, mailboxes which contain no saved messages will be removed # when closed (the exception is ``$spoolfile'' which is never removed). # If set, mailboxes are never removed. # # Note: This only applies to mbox and MMDF folders, Mutt does not # delete MH and Maildir directories. # # # set save_name=no # # Name: save_name # Type: boolean # Default: no # # # This variable controls how copies of outgoing messages are saved. # When set, a check is made to see if a mailbox specified by the # recipient address exists (this is done by searching for a mailbox in # the ``$folder'' directory with the username part of the # recipient address). If the mailbox exists, the outgoing message will # be saved to that mailbox, otherwise the message is saved to the # ``$record'' mailbox. # # Also see the ``$force_name'' variable. # # # set score=yes # # Name: score # Type: boolean # Default: yes # # # When this variable is unset, scoring is turned off. This can # be useful to selectively disable scoring for certain folders when the # ``$score_threshold_delete'' variable and friends are used. # # # set score_threshold_delete=-1 # # Name: score_threshold_delete # Type: number # Default: -1 # # # Messages which have been assigned a score equal to or lower than the value # of this variable are automatically marked for deletion by mutt. Since # mutt scores are always greater than or equal to zero, the default setting # of this variable will never mark a message for deletion. # # # set score_threshold_flag=9999 # # Name: score_threshold_flag # Type: number # Default: 9999 # # # Messages which have been assigned a score greater than or equal to this # variable's value are automatically marked "flagged". # # # set score_threshold_read=-1 # # Name: score_threshold_read # Type: number # Default: -1 # # # Messages which have been assigned a score equal to or lower than the value # of this variable are automatically marked as read by mutt. Since # mutt scores are always greater than or equal to zero, the default setting # of this variable will never mark a message read. # # # set send_charset="us-ascii:iso-8859-1:utf-8" # # Name: send_charset # Type: string # Default: "us-ascii:iso-8859-1:utf-8" # # # A list of character sets for outgoing messages. Mutt will use the # first character set into which the text can be converted exactly. # If your ``$charset'' is not iso-8859-1 and recipients may not # understand UTF-8, it is advisable to include in the list an # appropriate widely used standard character set (such as # iso-8859-2, koi8-r or iso-2022-jp) either instead of or after # "iso-8859-1". # # # set sendmail="/usr/sbin/sendmail -oem -oi" # # Name: sendmail # Type: path # Default: "/usr/sbin/sendmail -oem -oi" # # # Specifies the program and arguments used to deliver mail sent by Mutt. # Mutt expects that the specified program interprets additional # arguments as recipient addresses. # # # set sendmail_wait=0 # # Name: sendmail_wait # Type: number # Default: 0 # # # Specifies the number of seconds to wait for the ``$sendmail'' process # to finish before giving up and putting delivery in the background. # # Mutt interprets the value of this variable as follows: # >0 number of seconds to wait for sendmail to finish before continuing # 0 wait forever for sendmail to finish # <0 always put sendmail in the background without waiting # # # Note that if you specify a value other than 0, the output of the child # process will be put in a temporary file. If there is some error, you # will be informed as to where to find the output. # # # set shell="" # # Name: shell # Type: path # Default: "" # # # Command to use when spawning a subshell. By default, the user's login # shell from /etc/passwd is used. # # # set save_unsubscribed=no # # Name: save_unsubscribed # Type: boolean # Default: no # # # When set, info about unsubscribed newsgroups will be saved into # ``newsrc'' file and into cache. # # # set show_new_news=yes # # Name: show_new_news # Type: boolean # Default: yes # # # If set, newsserver will be asked for new newsgroups on entering # the browser. Otherwise, it will be done only once for a newsserver. # Also controls whether or not number of new articles of subscribed # newsgroups will be then checked. # # # set show_only_unread=no # # Name: show_only_unread # Type: boolean # Default: no # # # If set, only subscribed newsgroups that contain unread articles # will be displayed in browser. # # # set sig_dashes=yes # # Name: sig_dashes # Type: boolean # Default: yes # # # If set, a line containing ``-- '' will be inserted before your # ``$signature''. It is strongly recommended that you not unset # this variable unless your ``signature'' contains just your name. The # reason for this is because many software packages use ``-- \n'' to # detect your signature. For example, Mutt has the ability to highlight # the signature in a different color in the builtin pager. # # # set sig_on_top=no # # Name: sig_on_top # Type: boolean # Default: no # # # If set, the signature will be included before any quoted or forwarded # text. It is strongly recommended that you do not set this variable # unless you really know what you are doing, and are prepared to take # some heat from netiquette guardians. # # # set signature="~/.signature" # # Name: signature # Type: path # Default: "~/.signature" # # # Specifies the filename of your signature, which is appended to all # outgoing messages. If the filename ends with a pipe (``|''), it is # assumed that filename is a shell command and input should be read from # its stdout. # # # set simple_search="~f %s | ~s %s" # # Name: simple_search # Type: string # Default: "~f %s | ~s %s" # # # Specifies how Mutt should expand a simple search into a real search # pattern. A simple search is one that does not contain any of the ~ # operators. See ``patterns'' for more information on search patterns. # # For example, if you simply type joe at a search or limit prompt, Mutt # will automatically expand it to the value specified by this variable. # For the default value it would be: # # ~f joe | ~s joe # # # set smart_wrap=yes # # Name: smart_wrap # Type: boolean # Default: yes # # # Controls the display of lines longer than the screen width in the # internal pager. If set, long lines are wrapped at a word boundary. If # unset, lines are simply wrapped at the screen edge. Also see the # ``$markers'' variable. # # # set smileys="(>From )|(:[-^]?[][)(><}{|/DP])" # # Name: smileys # Type: regular expression # Default: "(>From )|(:[-^]?[][)(><}{|/DP])" # # # The pager uses this variable to catch some common false # positives of ``$quote_regexp'', most notably smileys in the beginning # of a line # # # set sleep_time=1 # # Name: sleep_time # Type: number # Default: 1 # # # Specifies time, in seconds, to pause while displaying certain informational # messages, while moving from folder to folder and after expunging # messages from the current folder. The default is to pause one second, so # a value of zero for this option suppresses the pause. # # # set sort=date # # Name: sort # Type: sort order # Default: date # # # Specifies how to sort messages in the index menu. Valid values # are: # # date or date-sent # date-received # from # mailbox-order (unsorted) # score # size # spam # subject # threads # to # # You may optionally use the reverse- prefix to specify reverse sorting # order (example: set sort=reverse-date-sent). # # # set sort_alias=alias # # Name: sort_alias # Type: sort order # Default: alias # # # Specifies how the entries in the `alias' menu are sorted. The # following are legal values: # # address (sort alphabetically by email address) # alias (sort alphabetically by alias name) # unsorted (leave in order specified in .muttrc) # # # set sort_aux=date # # Name: sort_aux # Type: sort order # Default: date # # # When sorting by threads, this variable controls how threads are sorted # in relation to other threads, and how the branches of the thread trees # are sorted. This can be set to any value that ``$sort'' can, except # threads (in that case, mutt will just use date-sent). You can also # specify the last- prefix in addition to the reverse- prefix, but last- # must come after reverse-. The last- prefix causes messages to be # sorted against its siblings by which has the last descendant, using # the rest of sort_aux as an ordering. For instance, set sort_aux=last- # date-received would mean that if a new message is received in a # thread, that thread becomes the last one displayed (or the first, if # you have set sort=reverse-threads.) Note: For reversed ``$sort'' # order $sort_aux is reversed again (which is not the right thing to do, # but kept to not break any existing configuration setting). # # # set sort_browser=alpha # # Name: sort_browser # Type: sort order # Default: alpha # # # Specifies how to sort entries in the file browser. By default, the # entries are sorted alphabetically. Valid values: # # alpha (alphabetically) # date # size # unsorted # # You may optionally use the reverse- prefix to specify reverse sorting # order (example: set sort_browser=reverse-date). # # # set sort_re=yes # # Name: sort_re # Type: boolean # Default: yes # # # This variable is only useful when sorting by threads with # ``$strict_threads'' unset. In that case, it changes the heuristic # mutt uses to thread messages by subject. With sort_re set, mutt will # only attach a message as the child of another message by subject if # the subject of the child message starts with a substring matching the # setting of ``$reply_regexp''. With sort_re unset, mutt will attach # the message whether or not this is the case, as long as the # non-``$reply_regexp'' parts of both messages are identical. # # # set spam_separator="," # # Name: spam_separator # Type: string # Default: "," # # # ``spam_separator'' controls what happens when multiple spam headers # are matched: if unset, each successive header will overwrite any # previous matches value for the spam label. If set, each successive # match will append to the previous, using ``spam_separator'' as a # separator. # # # set spoolfile="" # # Name: spoolfile # Type: path # Default: "" # # # If your spool mailbox is in a non-default place where Mutt cannot find # it, you can specify its location with this variable. Mutt will # automatically set this variable to the value of the environment # variable $MAIL if it is not set. # # # set status_chars="-*%A" # # Name: status_chars # Type: string # Default: "-*%A" # # # Controls the characters used by the "%r" indicator in # ``$status_format''. The first character is used when the mailbox is # unchanged. The second is used when the mailbox has been changed, and # it needs to be resynchronized. The third is used if the mailbox is in # read-only mode, or if the mailbox will not be written when exiting # that mailbox (You can toggle whether to write changes to a mailbox # with the toggle-write operation, bound by default to "%"). The fourth # is used to indicate that the current folder has been opened in attach- # message mode (Certain operations like composing a new mail, replying, # forwarding, etc. are not permitted in this mode). # # # set status_format="-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---" # # Name: status_format # Type: string # Default: "-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---" # # # Controls the format of the status line displayed in the index # menu. This string is similar to ``$index_format'', but has its own # set of printf()-like sequences: # # %b number of mailboxes with new mail * # %d number of deleted messages * # %f the full pathname of the current mailbox # %F number of flagged messages * # %h local hostname # %l size (in bytes) of the current mailbox * # %L size (in bytes) of the messages shown # (i.e., which match the current limit) * # %m the number of messages in the mailbox * # %M the number of messages shown (i.e., which match the current limit) * # %n number of new messages in the mailbox * # %o number of old unread messages * # %p number of postponed messages * # %P percentage of the way through the index # %r modified/read-only/won't-write/attach-message indicator, # according to $status_chars # %s current sorting mode ($sort) # %S current aux sorting method ($sort_aux) # %t number of tagged messages * # %u number of unread messages * # %v Mutt version string # %V currently active limit pattern, if any * # %>X right justify the rest of the string and pad with "X" # %|X pad to the end of the line with "X" # # # * = can be optionally printed if nonzero # # Some of the above sequences can be used to optionally print a string # if their value is nonzero. For example, you may only want to see the # number of flagged messages if such messages exist, since zero is not # particularly meaningful. To optionally print a string based upon one # of the above sequences, the following construct is used # # %??? # # where sequence_char is a character from the table above, and # optional_string is the string you would like printed if # sequence_char is nonzero. optional_string may contain # other sequences as well as normal text, but you may not nest # optional strings. # # Here is an example illustrating how to optionally print the number of # new messages in a mailbox: # %?n?%n new messages.? # # Additionally you can switch between two strings, the first one, if a # value is zero, the second one, if the value is nonzero, by using the # following construct: # %??&? # # You can additionally force the result of any printf-like sequence to # be lowercase by prefixing the sequence character with an underscore # (_) sign. For example, if you want to display the local hostname in # lowercase, you would use: # %_h # # If you prefix the sequence character with a colon (:) character, mutt # will replace any dots in the expansion by underscores. This might be helpful # with IMAP folders that don't like dots in folder names. # # # set status_on_top=no # # Name: status_on_top # Type: boolean # Default: no # # # Setting this variable causes the ``status bar'' to be displayed on # the first line of the screen rather than near the bottom. # # # set strict_threads=no # # Name: strict_threads # Type: boolean # Default: no # # # If set, threading will only make use of the ``In-Reply-To'' and # ``References'' fields when you ``$sort'' by message threads. By # default, messages with the same subject are grouped together in # ``pseudo threads.'' This may not always be desirable, such as in a # personal mailbox where you might have several unrelated messages with # the subject ``hi'' which will get grouped together. # # # set suspend=yes # # Name: suspend # Type: boolean # Default: yes # # # When unset, mutt won't stop when the user presses the terminal's # susp key, usually ``control-Z''. This is useful if you run mutt # inside an xterm using a command like xterm -e mutt. # # # set text_flowed=no # # Name: text_flowed # Type: boolean # Default: no # # # When set, mutt will generate text/plain; format=flowed attachments. # This format is easier to handle for some mailing software, and generally # just looks like ordinary text. To actually make use of this format's # features, you'll need support in your editor. # # Note that $indent_string is ignored when this option is set. # # # set thread_received=no # # Name: thread_received # Type: boolean # Default: no # # # When set, mutt uses the date received rather than the date sent # to thread messages by subject. # # # set thorough_search=no # # Name: thorough_search # Type: boolean # Default: no # # # Affects the ~b and ~h search operations described in # section ``patterns'' above. If set, the headers and attachments of # messages to be searched are decoded before searching. If unset, # messages are searched as they appear in the folder. # # # set tilde=no # # Name: tilde # Type: boolean # Default: no # # # When set, the internal-pager will pad blank lines to the bottom of the # screen with a tilde (~). # # # set timeout=600 # # Name: timeout # Type: number # Default: 600 # # # This variable controls the number of seconds Mutt will wait # for a key to be pressed in the main menu before timing out and # checking for new mail. A value of zero or less will cause Mutt # to never time out. # # # set tmpdir="" # # Name: tmpdir # Type: path # Default: "" # # # This variable allows you to specify where Mutt will place its # temporary files needed for displaying and composing messages. If # this variable is not set, the environment variable TMPDIR is # used. If TMPDIR is not set then "/tmp" is used. # # # set to_chars=" +TCFL" # # Name: to_chars # Type: string # Default: " +TCFL" # # # Controls the character used to indicate mail addressed to you. The # first character is the one used when the mail is NOT addressed to your # address (default: space). The second is used when you are the only # recipient of the message (default: +). The third is when your address # appears in the TO header field, but you are not the only recipient of # the message (default: T). The fourth character is used when your # address is specified in the CC header field, but you are not the only # recipient. The fifth character is used to indicate mail that was sent # by you. The sixth character is used to indicate when a mail # was sent to a mailing-list you subscribe to (default: L). # # # set tunnel="" # # Name: tunnel # Type: string # Default: "" # # # Setting this variable will cause mutt to open a pipe to a command # instead of a raw socket. You may be able to use this to set up # preauthenticated connections to your IMAP/POP3 server. Example: # # tunnel="ssh -q mailhost.net /usr/local/libexec/imapd" # # NOTE: For this example to work you must be able to log in to the remote # machine without having to enter a password. # # # set use_8bitmime=no # # Name: use_8bitmime # Type: boolean # Default: no # # # Warning: do not set this variable unless you are using a version # of sendmail which supports the -B8BITMIME flag (such as sendmail # 8.8.x) or you may not be able to send mail. # # When set, Mutt will invoke ``$sendmail'' with the -B8BITMIME # flag when sending 8-bit messages to enable ESMTP negotiation. # # # set use_domain=yes # # Name: use_domain # Type: boolean # Default: yes # # # When set, Mutt will qualify all local addresses (ones without the # @host portion) with the value of ``$hostname''. If unset, no # addresses will be qualified. # # # set use_from=yes # # Name: use_from # Type: boolean # Default: yes # # # When set, Mutt will generate the `From:' header field when # sending messages. If unset, no `From:' header field will be # generated unless the user explicitly sets one using the ``my_hdr'' # command. # # # set use_ipv6=yes # # Name: use_ipv6 # Type: boolean # Default: yes # # # When set, Mutt will look for IPv6 addresses of hosts it tries to # contact. If this option is unset, Mutt will restrict itself to IPv4 addresses. # Normally, the default should work. # # # set use_idn=yes # # Name: use_idn # Type: boolean # Default: yes # # # When set, Mutt will show you international domain names decoded. # Note: You can use IDNs for addresses even if this is unset. # This variable only affects decoding. # # # set use_ipv6=yes # # Name: use_ipv6 # Type: boolean # Default: yes # # # When set, Mutt will look for IPv6 addresses of hosts it tries to # contact. If this option is unset, Mutt will restrict itself to IPv4 addresses. # Normally, the default should work. # # # set user_agent=yes # # Name: user_agent # Type: boolean # Default: yes # # # When set, mutt will add a "User-Agent" header to outgoing # messages, indicating which version of mutt was used for composing # them. # # # set visual="" # # Name: visual # Type: path # Default: "" # # # Specifies the visual editor to invoke when the ~v command is # given in the builtin editor. # # # set wait_key=yes # # Name: wait_key # Type: boolean # Default: yes # # # Controls whether Mutt will ask you to press a key after shell- # escape, pipe-message, pipe-entry, print-message, # and print-entry commands. # # It is also used when viewing attachments with ``auto_view'', provided # that the corresponding mailcap entry has a needsterminal flag, # and the external program is interactive. # # When set, Mutt will always ask for a key. When unset, Mutt will wait # for a key only if the external command returned a non-zero status. # # # set weed=yes # # Name: weed # Type: boolean # Default: yes # # # When set, mutt will weed headers when displaying, forwarding, # printing, or replying to messages. # # # set wrap_search=yes # # Name: wrap_search # Type: boolean # Default: yes # # # Controls whether searches wrap around the end of the mailbox. # # When set, searches will wrap around the first (or last) message. When # unset, searches will not wrap. # # # set wrapmargin=0 # # Name: wrapmargin # Type: number # Default: 0 # # # Controls the size of the margin remaining at the right side of # the terminal when mutt's pager does smart wrapping. # # # set write_inc=10 # # Name: write_inc # Type: number # Default: 10 # # # When writing a mailbox, a message will be printed every # write_inc messages to indicate progress. If set to 0, only a # single message will be displayed before writing a mailbox. # # Also see the ``$read_inc'' variable. # # # set write_bcc=yes # # Name: write_bcc # Type: boolean # Default: yes # # # Controls whether mutt writes out the Bcc header when preparing # messages to be sent. Exim users may wish to unset this. # # # set x_comment_to=no # # Name: x_comment_to # Type: boolean # Default: no # # # If set, Mutt will add ``X-Comment-To:'' field (that contains full # name of original article author) to article that followuped to newsgroup. # #