<!--}}}-->
-<sect>Syntax of Initialization Files<label id="muttrc-syntax"> <!--{{{-->
+<sect>Basic Syntax of Initialization Files<label id="muttrc-syntax"> <!--{{{-->
<p>
An initialization file consists of a series of <ref id="commands"
comment which includes line3 and line4. line5 is a new line of its own and
thus is interpreted again.
-It is also possible to substitute the output of a Unix command in an
-initialization file. This is accomplished by enclosing the command in
-backquotes (``). For example,
+The commands understood by mutt are explained in the next paragraphs.
+For a complete list, see the <ref id="commands" name="command reference">.
+
+<!--}}}-->
+
+<sect>Variable Expansion <!--{{{-->
+
+ <sect1>Commands' Output
+
+ <p>It is possible to substitute the output of a Unix command in an
+ initialization file. This is accomplished by enclosing the command
+ in backquotes (``) as in, for example:
+
<tscreen><verb>
my_hdr X-Operating-System: `uname -a`
</verb></tscreen>
-The output of the Unix command ``uname -a'' will be substituted before the
-line is parsed. Note that since initialization files are line oriented, only
-the first line of output from the Unix command will be substituted.
-UNIX environments can be accessed like the way it is done in shells like
-sh and bash: Prepend the name of the environment by a ``$''. For
-example,
+ <p>The output of the Unix command ``uname -a'' will be substituted
+ before the line is parsed. Note that since initialization files are
+ line oriented, only the first line of output from the Unix command
+ will be substituted.
+
+ <sect1>Environment Variables
+
+ <p>UNIX environments can be accessed like the way it is done in
+ shells like sh and bash: Prepend the name of the environment by a
+ ``$'' sign. For example,
+
<tscreen><verb>
set record=+sent_on_$HOSTNAME
</verb></tscreen>
-This also applies for all configuration variables known to mutt-ng,
-for example
+ <p>sets the <ref id="record" name="$record"> variable to the
+ string <em/+sent_on_/ and appends the value of the evironment
+ variable <tt>$HOSTNAME</tt>.
+
+ <p><bf/Note:/ There will be no warning if an environment variable
+ is not defined. The result will of the expansion will then be empty.
+
+ <sect1>Configuration Variables
+
+ <p>As for environment variables, the values of all configuration
+ variables as string can be used in the same way, too. For example,
+
<tscreen><verb>
set imap_home_namespace = $folder
</verb></tscreen>
-The commands understood by mutt are explained in the next paragraphs.
-For a complete list, see the <ref id="commands" name="command reference">.
+ <p>would set the value of <ref id="imap_home_namespace"
+ name="$imap_home_namespace"> to the value to
+ which <ref id="folder" name="$folder"> is <em/currently/ set
+ to.
-<!--}}}-->
+ <p><bf/Note:/ There're no logical links established in such cases so
+ that the the value for <ref id="imap_home_namespace"
+ name="$imap_home_namespace"> won't change even
+ if <ref id="folder" name="$folder"> gets changed.
+
+ <p><bf/Note:/ There will be no warning if a configuration variable
+ is not defined or is empty. The result will of the expansion will
+ then be empty.
+
+ <sect1>Self-Defined Variables
+
+ <p>Mutt-ng flexibly allows users to define their own variables. To
+ avoid conflicts with the standard set and to prevent misleading
+ error messages, there's a reserved namespace for them. All
+ user-defined variables must be prefixed with <tt/user_/ and can be
+ used just like any ordinary configuration or environment
+ variable.
+
+ <p>For example, to view the manual, users can either define three
+ macros like the following
+
+<tscreen><verb>
+macro generic <F1> "!less -r /path/to/manual" "Show manual"
+macro pager <F1> "!less -r /path/to/manual" "Show manual"
+macro index <F1> "!less -r /path/to/manual" "Show manual"
+</verb></tscreen>
+
+ <p>for <tt/generic/, <tt/pager/ and <tt/index/. The alternative is to
+ define a custom variable like so:
+
+<tscreen><verb>
+set user_manualcmd = '!less -r /path/to_manual"
+macro generic <F1> "$user_manualcmd<enter>" "Show manual"
+macro pager <F1> "$user_manualcmd<enter>" "Show manual"
+macro index <F1> "$user_manualcmd<enter>" "Show manual"
+</verb></tscreen>
+
+ <p>Using this feature, arbitrary sequences can be defined once and
+ recalled and reused where necessary. More advanced scenarios could
+ include to save a variable's value at the beginning of macro
+ sequence and restore it at end.
+
+ <sect1>Type Conversions
+
+ <p>A note about variable's types during conversion: internally
+ values are stored in internal types but for any dump/query or set
+ operation they're converted to and from string. That means that
+ there's no need to worry about types when referencing any variable.
+ As an example, the following can be used without harm (besides
+ makeing muttng very likely behave strange):
+
+<tscreen><verb>
+set read_inc = 100
+set folder = $read_inc
+set $read_inc = $folder
+set user_magic_number = 42
+set folder = $user_magic_number
+</verb></tscreen>
+
+<!--}}}-->
<sect>Defining/Using aliases<label id="alias"> <!--{{{-->
<p>
-a attach a file to a message
-b specify a blind carbon-copy (BCC) address
-c specify a carbon-copy (Cc) address
--D print the value of all variables on stdout
-e specify a config command to be run after initialization files are read
-f specify a mailbox to load
-F specify an alternate file to read initialization commands
-Q query a configuration variable
-R open mailbox in read-only mode
-s specify a subject (enclose in quotes if it contains spaces)
+-t dump the value of all variables to stdout
+-T dump the value of all changed variables to stdout
-v show version number and compile-time definitions
-x simulate the mailx(1) compose mode
-y show a menu containing the files specified by the mailboxes command