* please see the file GPL in the top level source directory.
*/
-#ifdef _MAKEDOC
-# include "config.h"
-#else
-# include "sort.h"
-#endif
-
-#include "buffy.h"
+#include "sort.h"
#include "mutt.h"
#ifndef _MAKEDOC
#define DT_SORT 6 /* sorting methods */
#define DT_RX 7 /* regular expressions */
#define DT_MAGIC 8 /* mailbox type */
-#define DT_SYN 9 /* synonym for another variable */
-#define DT_ADDR 10 /* e-mail address */
#define DTYPE(x) ((x) & DT_MASK)
#define M_SET_UNSET (1<<1) /* default is to unset all vars */
#define M_SET_RESET (1<<2) /* default is to reset all vars to default */
-/* forced redraw/resort types */
-#define R_NONE 0
-#define R_INDEX (1<<0)
-#define R_PAGER (1<<1)
-#define R_BOTH (R_INDEX|R_PAGER)
-
-/* TODO:MC: will go in the the thread module */
-#define R_RESORT (1<<2) /* resort the mailbox */
-#define R_RESORT_SUB (1<<3) /* resort subthreads */
-#define R_RESORT_INIT (1<<4) /* resort from scratch */
-#define R_TREE (1<<5) /* redraw the thread tree */
-#define R_RESORT_BOTH (R_RESORT|R_RESORT_SUB)
-
struct option_t {
const char *option;
short type;
- short flags;
unsigned long data;
const char *init;
};
#endif /* _MAKEDOC */
-#ifndef ISPELL
-#define ISPELL "ispell"
-#endif
-
/* build complete documentation */
-#ifdef _MAKEDOC
-# ifndef USE_SSL
-# define USE_SSL
-# endif
-# ifndef USE_LIBESMTP
-# define USE_LIBESMTP
-# endif
-# ifndef USE_NNTP
-# define USE_NNTP
-# endif
-# ifndef USE_GNUTLS
-# define USE_GNUTLS
-# endif
-# ifndef USE_HCACHE
-# define USE_HCACHE
-# endif
-# ifndef HAVE_LIBIDN
-# define HAVE_LIBIDN
-# endif
-# ifndef HAVE_GETADDRINFO
-# define HAVE_GETADDRINFO
-# endif
-#endif
-
struct option_t MuttVars[] = {
/*++*/
- {"abort_noattach", DT_QUAD, R_NONE, OPT_ATTACH, "no" },
+ {"abort_noattach", DT_QUAD, OPT_ATTACH, "no" },
/*
** .pp
** This variable specifies whether to abort sending if no attachment
** .pp
** See also the $$attach_remind_regexp variable.
*/
- {"abort_nosubject", DT_QUAD, R_NONE, OPT_SUBJECT, "ask-yes" },
+ {"abort_nosubject", DT_QUAD, OPT_SUBJECT, "ask-yes" },
/*
** .pp
** If set to \fIyes\fP, when composing messages and no subject is given
** \fIno\fP, composing messages with no subject given at the subject
** prompt will never be aborted.
*/
- {"abort_unmodified", DT_QUAD, R_NONE, OPT_ABORT, "yes" },
+ {"abort_unmodified", DT_QUAD, OPT_ABORT, "yes" },
/*
** .pp
** If set to \fIyes\fP, composition will automatically abort after
** check only happens after the \fIfirst\fP edit of the file). When set
** to \fIno\fP, composition will never be aborted.
*/
- {"allow_8bit", DT_BOOL, R_NONE, OPTALLOW8BIT, "yes" },
+ {"allow_8bit", DT_BOOL, OPTALLOW8BIT, "yes" },
/*
** .pp
** Controls whether 8-bit data is converted to 7-bit using either
** \fTquoted-printable\fP or \fTbase64\fP encoding when sending mail.
*/
- {"allow_ansi", DT_BOOL, R_NONE, OPTALLOWANSI, "no" },
- /*
- ** .pp
- ** Controls whether ANSI color codes in messages (and color tags in
- ** rich text messages) are to be interpreted.
- ** Messages containing these codes are rare, but if this option is set,
- ** their text will be colored accordingly. Note that this may override
- ** your color choices, and even present a security problem, since a
- ** message could include a line like ``\fT[-- PGP output follows ...\fP" and
- ** give it the same color as your attachment color.
- */
- {"arrow_cursor", DT_BOOL, R_BOTH, OPTARROWCURSOR, "no" },
- /*
- ** .pp
- ** When \fIset\fP, an arrow (``\fT->\fP'') will be used to indicate the current entry
- ** in menus instead of highlighting the whole line. On slow network or modem
- ** links this will make response faster because there is less that has to
- ** be redrawn on the screen when moving to the next or previous entries
- ** in the menu.
- */
- {"ascii_chars", DT_BOOL, R_BOTH, OPTASCIICHARS, "no" },
- /*
- ** .pp
- ** If \fIset\fP, Madmutt will use plain ASCII characters when displaying thread
- ** and attachment trees, instead of the default \fTACS\fP characters.
- */
- {"askbcc", DT_BOOL, R_NONE, OPTASKBCC, "no" },
+ {"askbcc", DT_BOOL, OPTASKBCC, "no" },
/*
** .pp
** If \fIset\fP, Madmutt will prompt you for blind-carbon-copy (Bcc) recipients
** before editing an outgoing message.
*/
- {"askcc", DT_BOOL, R_NONE, OPTASKCC, "no" },
+ {"askcc", DT_BOOL, OPTASKCC, "no" },
/*
** .pp
** If \fIset\fP, Madmutt will prompt you for carbon-copy (Cc) recipients before
** editing the body of an outgoing message.
*/
- {"assumed_charset", DT_STR, R_NONE, UL &AssumedCharset, "us-ascii"},
- /*
- ** .pp
- ** This variable is a colon-separated list of character encoding
- ** schemes for messages without character encoding indication.
- ** Header field values and message body content without character encoding
- ** indication would be assumed that they are written in one of this list.
- ** By default, all the header fields and message body without any charset
- ** indication are assumed to be in \fTus-ascii\fP.
- ** .pp
- ** For example, Japanese users might prefer this:
- ** .pp
- ** \fTset assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"\fP
- ** .pp
- ** However, only the first content is valid for the message body.
- ** This variable is valid only if $$strict_mime is unset.
- */
-#ifdef USE_NNTP
- {"nntp_ask_followup_to", DT_BOOL, R_NONE, OPTASKFOLLOWUP, "no" },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** If \fIset\fP, Madmutt will prompt you for the \fTFollowup-To:\fP header
- ** field before editing the body of an outgoing news article.
- */
- {"nntp_ask_x_comment_to", DT_BOOL, R_NONE, OPTASKXCOMMENTTO, "no" },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** If \fIset\fP, Madmutt will prompt you for the \fTX-Comment-To:\fP header
- ** field before editing the body of an outgoing news article.
- */
-#endif
- {"attach_format", DT_STR, R_NONE, UL &AttachFormat, "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "},
+ {"attach_format", DT_STR, UL &AttachFormat, "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "},
/*
** .pp
** This variable describes the format of the ``attachment'' menu. The
** .dt %|X .dd pad to the end of the line with character "X"
** .de
*/
- {"attach_remind_regexp", DT_RX, R_NONE, UL &AttachRemindRegexp, "attach"},
+ {"attach_remind_regexp", DT_RX, UL &AttachRemindRegexp, "attach"},
/*
** .pp
** If this variable is non-empty, madmutt will scan a message's contents
** This variable and $$abort_noattach are intended to remind the user
** to attach files if the message's text references them.
*/
- {"attach_sep", DT_STR, R_NONE, UL &AttachSep, "\n"},
+ {"attach_sep", DT_STR, UL &AttachSep, "\n"},
/*
** .pp
** The separator to add between attachments when operating (saving,
** printing, piping, etc) on a list of tagged attachments.
*/
- {"attach_split", DT_BOOL, R_NONE, OPTATTACHSPLIT, "yes" },
+ {"attach_split", DT_BOOL, OPTATTACHSPLIT, "yes" },
/*
** .pp
** If this variable is \fIunset\fP, when operating (saving, printing, piping,
** ``$$attach_sep'' separator is added after each attachment. When \fIset\fP,
** Madmutt will operate on the attachments one by one.
*/
- {"attribution", DT_STR, R_NONE, UL &Attribution, "On %d, %n wrote:"},
+ {"attribution", DT_STR, UL &Attribution, "On %d, %n wrote:"},
/*
** .pp
** This is the string that will precede a message which has been included
** in a reply. For a full listing of defined \fTprintf(3)\fP-like sequences see
** the section on ``$$index_format''.
*/
- {"autoedit", DT_BOOL, R_NONE, OPTAUTOEDIT, "no" },
+ {"autoedit", DT_BOOL, OPTAUTOEDIT, "no" },
/*
** .pp
** When \fIset\fP along with ``$$edit_headers'', Madmutt will skip the initial
** .pp
** Also see ``$$fast_reply''.
*/
- {"auto_tag", DT_BOOL, R_NONE, OPTAUTOTAG, "no" },
+ {"auto_tag", DT_BOOL, OPTAUTOTAG, "no" },
/*
** .pp
** When \fIset\fP, functions in the \fIindex\fP menu which affect a message
** unset, you must first use the ``tag-prefix'' function (default: "\fT;\fP") to
** make the next function apply to all tagged messages.
*/
- {"bounce", DT_QUAD, R_NONE, OPT_BOUNCE, "ask-yes" },
+ {"bounce", DT_QUAD, OPT_BOUNCE, "ask-yes" },
/*
** .pp
** Controls whether you will be asked to confirm bouncing messages.
** message. Setting this variable to \fIno\fP is not generally useful,
** and thus not recommended, because you are unable to bounce messages.
*/
- {"bounce_delivered", DT_BOOL, R_NONE, OPTBOUNCEDELIVERED, "yes" },
+ {"bounce_delivered", DT_BOOL, OPTBOUNCEDELIVERED, "yes" },
/*
** .pp
** When this variable is \fIset\fP, Madmutt will include
** \fTDelivered-To:\fP header fields when bouncing messages.
** Postfix users may wish to \fIunset\fP this variable.
*/
- { "braille_friendly", DT_BOOL, R_NONE, OPTBRAILLEFRIENDLY, "no" },
- /*
- ** .pp
- ** When this variable is set, mutt will place the cursor at the beginning
- ** of the current line in menus, even when the arrow_cursor variable
- ** is unset, making it easier for blind persons using Braille displays to
- ** follow these menus. The option is disabled by default because many
- ** visual terminals don't permit making the cursor invisible.
- */
-#ifdef USE_NNTP
- {"nntp_catchup", DT_QUAD, R_NONE, OPT_CATCHUP, "ask-yes" },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** If this variable is \fIset\fP, Madmutt will mark all articles in a newsgroup
- ** as read when you leaving it.
- */
-#endif
- {"charset", DT_STR, R_NONE, UL &Charset, "" },
- /*
- ** .pp
- ** Character set your terminal uses to display and enter textual data.
- */
- {"check_new", DT_BOOL, R_NONE, OPTCHECKNEW, "yes" },
+ {"check_new", DT_BOOL, OPTCHECKNEW, "yes" },
/*
** .pp
** \fBNote:\fP this option only affects \fImaildir\fP and \fIMH\fP style
** checking each file to see if it has already been looked at. If it's
** \fIunset\fP, no check for new mail is performed while the mailbox is open.
*/
- {"collapse_unread", DT_BOOL, R_NONE, OPTCOLLAPSEUNREAD, "yes" },
+ {"collapse_unread", DT_BOOL, OPTCOLLAPSEUNREAD, "no" },
/*
** .pp
** When \fIunset\fP, Madmutt will not collapse a thread if it contains any
** unread messages.
*/
- {"uncollapse_jump", DT_BOOL, R_NONE, OPTUNCOLLAPSEJUMP, "no" },
+ {"uncollapse_jump", DT_BOOL, OPTUNCOLLAPSEJUMP, "no" },
/*
** .pp
** When \fIset\fP, Madmutt will jump to the next unread message, if any,
** when the current thread is \fIun\fPcollapsed.
*/
- {"compose_format", DT_STR, R_BOTH, UL &ComposeFormat, "-- Madmutt: Compose [Approx. msg size: %l Atts: %a]%>-"},
+ {"compose_format", DT_STR, UL &ComposeFormat, "-- Madmutt: Compose [Approx. msg size: %l Atts: %a]%>-"},
/*
** .pp
** Controls the format of the status line displayed in the ``compose''
** See the text describing the ``$$status_format'' option for more
** information on how to set ``$$compose_format''.
*/
- {"config_charset", DT_STR, R_NONE, UL &ConfigCharset, "" },
+ {"config_charset", DT_STR, UL &ConfigCharset, "" },
/*
** .pp
** When defined, Madmutt will recode commands in rc files from this
** encoding.
*/
- {"confirmappend", DT_BOOL, R_NONE, OPTCONFIRMAPPEND, "yes" },
+ {"confirmappend", DT_BOOL, OPTCONFIRMAPPEND, "yes" },
/*
** .pp
** When \fIset\fP, Madmutt will prompt for confirmation when appending messages to
** an existing mailbox.
*/
- {"confirmcreate", DT_BOOL, R_NONE, OPTCONFIRMCREATE, "yes" },
+ {"confirmcreate", DT_BOOL, OPTCONFIRMCREATE, "yes" },
/*
** .pp
** When \fIset\fP, Madmutt will prompt for confirmation when saving messages to a
** mailbox which does not yet exist before creating it.
*/
- {"connect_timeout", DT_NUM, R_NONE, UL &ConnectTimeout, "30" },
+ {"connect_timeout", DT_NUM, UL &ConnectTimeout, "30" },
/*
** .pp
** Causes Madmutt to timeout a network connection (for IMAP or POP) after this
** many seconds if the connection is not able to be established. A negative
** value causes Madmutt to wait indefinitely for the connection to succeed.
*/
- {"content_type", DT_STR, R_NONE, UL &ContentType, "text/plain"},
+ {"content_type", DT_STR, UL &ContentType, "text/plain"},
/*
** .pp
** Sets the default \fTContent-Type:\fP header field for the body
** of newly composed messages.
*/
- {"copy", DT_QUAD, R_NONE, OPT_COPY, "yes" },
+ {"copy", DT_QUAD, OPT_COPY, "yes" },
/*
** .pp
** This variable controls whether or not copies of your outgoing messages
** will be saved for later references. Also see ``$$record'',
- ** ``$$save_name'', ``$$force_name'' and ``$fcc-hook''.
- */
- {"crypt_use_gpgme", DT_BOOL, R_NONE, OPTCRYPTUSEGPGME, "no" },
- /*
- ** .pp
- ** This variable controls the use the GPGME enabled crypto backends.
- ** If it is \fIset\fP and Madmutt was build with gpgme support, the gpgme code for
- ** S/MIME and PGP will be used instead of the classic code.
- ** .pp
- ** \fBNote\fP: You need to use this option in your \fT.madmuttrc\fP configuration
- ** file as it won't have any effect when used interactively.
- */
- {"crypt_autopgp", DT_BOOL, R_NONE, OPTCRYPTAUTOPGP, "yes" },
- /*
- ** .pp
- ** This variable controls whether or not Madmutt may automatically enable
- ** PGP encryption/signing for messages. See also ``$$crypt_autoencrypt'',
- ** ``$$crypt_replyencrypt'',
- ** ``$$crypt_autosign'', ``$$crypt_replysign'' and ``$$smime_is_default''.
+ ** and ``$fcc-hook''.
*/
- {"crypt_autosmime", DT_BOOL, R_NONE, OPTCRYPTAUTOSMIME, "yes" },
- /*
- ** .pp
- ** This variable controls whether or not Madmutt may automatically enable
- ** S/MIME encryption/signing for messages. See also ``$$crypt_autoencrypt'',
- ** ``$$crypt_replyencrypt'',
- ** ``$$crypt_autosign'', ``$$crypt_replysign'' and ``$$smime_is_default''.
- */
- {"date_format", DT_STR, R_BOTH, UL &DateFmt, "!%a, %b %d, %Y at %I:%M:%S%p %Z"},
+ {"date_format", DT_STR, UL &DateFmt, "!%a, %b %d, %Y at %I:%M:%S%p %Z"},
/*
** .pp
** This variable controls the format of the date printed by the ``\fT%d\fP''
** rest of the string are expanded in the \fIC\fP locale (that is in US
** English).
*/
- {"default_hook", DT_STR, R_NONE, UL &DefaultHook, "~f %s !~P | (~P ~C %s)"},
+ {"default_hook", DT_STR, UL &DefaultHook, "~f %s !~P | (~P ~C %s)"},
/*
** .pp
** This variable controls how send-hooks, message-hooks, save-hooks,
** ``alternates'') and is to or cc'ed to a user matching the given
** regular expression.
*/
- {"delete", DT_QUAD, R_NONE, OPT_DELETE, "ask-yes" },
+ {"delete", DT_QUAD, OPT_DELETE, "ask-yes" },
/*
** .pp
** Controls whether or not messages are really deleted when closing or
** deleting will automatically be purged without prompting. If set to
** \fIno\fP, messages marked for deletion will be kept in the mailbox.
*/
- {"delete_space", DT_BOOL, R_NONE, OPTDELSP, "no" },
+ {"delete_space", DT_BOOL, OPTDELSP, "no" },
/*
** .pp
** When sending messages with \fTformat=flowed\fP by \fIsetting\fP the
** \fBNote:\fP this variable only has an effect on \fIoutgoing\fP messages
** (if $$text_flowed is \fIset\fP) but not on incomming.
*/
- {"delete_untag", DT_BOOL, R_NONE, OPTDELETEUNTAG, "yes" },
+ {"delete_untag", DT_BOOL, OPTDELETEUNTAG, "yes" },
/*
** .pp
** If this option is \fIset\fP, Madmutt will untag messages when marking them
** for deletion. This applies when you either explicitly delete a message,
** or when you save it to another folder.
*/
- {"digest_collapse", DT_BOOL, R_NONE, OPTDIGESTCOLLAPSE, "yes" },
+ {"digest_collapse", DT_BOOL, OPTDIGESTCOLLAPSE, "yes" },
/*
** .pp
** If this option is \fIset\fP, Madmutt's received-attachments menu will not show the subparts of
** individual messages in a multipart/digest. To see these subparts, press 'v' on that menu.
*/
- {"display_filter", DT_PATH, R_PAGER, UL &DisplayFilter, ""},
+ {"display_filter", DT_PATH, UL &DisplayFilter, ""},
/*
** .pp
** When \fIset\fP, specifies a command used to filter messages. When a message
** is viewed it is passed as standard input to $$display_filter, and the
** filtered message is read from the standard output.
*/
- {"duplicate_threads", DT_BOOL, R_RESORT|R_RESORT_INIT|R_INDEX, OPTDUPTHREADS, "yes" },
+ {"duplicate_threads", DT_BOOL, OPTDUPTHREADS, "yes" },
/*
** .pp
** This variable controls whether Madmutt, when sorting by threads, threads
** If it is \fIset\fP, it will indicate that it thinks they are duplicates
** of each other with an equals sign in the thread diagram.
*/
- {"edit_headers", DT_BOOL, R_NONE, OPTEDITHDRS, "no" },
+ {"edit_headers", DT_BOOL, OPTEDITHDRS, "no" },
/*
** .pp
** This option allows you to edit the header of your outgoing messages
** Which empty header fields to show is controlled by the
** $$editor_headers option.
*/
-#ifdef USE_NNTP
- {"editor_headers", DT_STR, R_NONE, UL &EditorHeaders, "From: To: Cc: Bcc: Subject: Reply-To: Newsgroups: Followup-To: X-Comment-To:" },
-#else
- {"editor_headers", DT_STR, R_NONE, UL &EditorHeaders, "From: To: Cc: Bcc: Subject: Reply-To:" },
-#endif
+ {"editor_headers", DT_STR, UL &EditorHeaders, "From: To: Cc: Bcc: Subject: Reply-To:" },
/*
** .pp
** If $$edit_headers is \fIset\fP, this space-separated list specifies
** Note: if $$edit_headers had to be turned on by force because
** $$strict_mailto is \fIunset\fP, this option has no effect.
*/
- {"encode_from", DT_BOOL, R_NONE, OPTENCODEFROM, "no" },
+ {"encode_from", DT_BOOL, OPTENCODEFROM, "no" },
/*
** .pp
** When \fIset\fP, Madmutt will \fTquoted-printable\fP encode messages when
** you must take care of space-stuffing <tt/From / lines (with a trailing
** space) yourself.
*/
- {"fast_reply", DT_BOOL, R_NONE, OPTFASTREPLY, "no" },
+ {"fast_reply", DT_BOOL, OPTFASTREPLY, "no" },
/*
** .pp
** When \fIset\fP, the initial prompt for recipients and subject are skipped
** \fBNote:\fP this variable has no effect when the ``$$autoedit''
** variable is \fIset\fP.
*/
- {"fcc_attach", DT_BOOL, R_NONE, OPTFCCATTACH, "yes" },
+ {"fcc_attach", DT_BOOL, OPTFCCATTACH, "yes" },
/*
** .pp
** This variable controls whether or not attachments on outgoing messages
** are saved along with the main body of your message.
*/
- {"fcc_clear", DT_BOOL, R_NONE, OPTFCCCLEAR, "no" },
+ {"fcc_clear", DT_BOOL, OPTFCCCLEAR, "no" },
/*
** .pp
** When this variable is \fIset\fP, FCCs will be stored unencrypted and
** signed.
** (PGP only)
*/
- {"file_charset", DT_STR, R_NONE, UL &FileCharset, "" },
- /*
- ** .pp
- ** This variable is a colon-separated list of character encoding
- ** schemes for text file attatchments.
- ** If \fIunset\fP, $$charset value will be used instead.
- ** For example, the following configuration would work for Japanese
- ** text handling:
- ** .pp
- ** \fTset file_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"\fP
- ** .pp
- ** Note: ``\fTiso-2022-*\fP'' must be put at the head of the value as shown above
- ** if included.
- */
- {"folder", DT_PATH, R_NONE, UL &Maildir, "~/Mail"},
+ {"folder", DT_PATH, UL &Maildir, "~/Mail"},
/*
** .pp
** Specifies the default location of your mailboxes. A ``\fT+\fP'' or ``\fT=\fP'' at the
** you use ``+'' or ``='' for any other variables since expansion takes place
** during the ``set'' command.
*/
- {"folder_format", DT_STR, R_INDEX, UL &FolderFormat, "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"},
+ {"folder_format", DT_STR, UL &FolderFormat, "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"},
/*
** .pp
** This variable allows you to customize the file browser display to your
** .dt %|X .dd pad to the end of the line with character "X"
** .de
*/
- {"followup_to", DT_BOOL, R_NONE, OPTFOLLOWUPTO, "yes" },
+ {"followup_to", DT_BOOL, OPTFOLLOWUPTO, "yes" },
/*
** .pp
** Controls whether or not the \fTMail-Followup-To:\fP header field is
** sent to both the list and your address, resulting in two copies
** of the same email for you.
*/
-#ifdef USE_NNTP
- {"nntp_followup_to_poster", DT_QUAD, R_NONE, OPT_FOLLOWUPTOPOSTER, "ask-yes" },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** If this variable is \fIset\fP and the keyword "\fTposter\fP" is present in
- ** the \fTFollowup-To:\fP header field, a follow-up to the newsgroup is not
- ** permitted. The message will be mailed to the submitter of the
- ** message via mail.
- */
-#endif
- {"force_name", DT_BOOL, R_NONE, OPTFORCENAME, "no" },
- /*
- ** .pp
- ** This variable is similar to ``$$save_name'', except that Madmutt will
- ** store a copy of your outgoing message by the username of the address
- ** you are sending to even if that mailbox does not exist.
- ** .pp
- ** Also see the ``$$record'' variable.
- */
- {"force_buffy_check", DT_BOOL, R_NONE, OPTFORCEBUFFYCHECK, "no" },
+ {"force_buffy_check", DT_BOOL, OPTFORCEBUFFYCHECK, "no" },
/*
** .pp
** When \fIset\fP, it causes Madmutt to check for new mail when the
** Also see the following variables: ``$$timeout'', ``$$mail_check'' and
** ``$$imap_mail_check''.
*/
- {"forward_decode", DT_BOOL, R_NONE, OPTFORWDECODE, "yes" },
+ {"forward_decode", DT_BOOL, OPTFORWDECODE, "yes" },
/*
** .pp
** Controls the decoding of complex MIME messages into \fTtext/plain\fP when
** This variable is only used, if ``$$mime_forward'' is \fIunset\fP,
** otherwise ``$$mime_forward_decode'' is used instead.
*/
- {"forward_edit", DT_QUAD, R_NONE, OPT_FORWEDIT, "yes" },
+ {"forward_edit", DT_QUAD, OPT_FORWEDIT, "yes" },
/*
** .pp
** This quadoption controls whether or not the user is automatically
** placed in the editor when forwarding messages. For those who always want
** to forward with no modification, use a setting of \fIno\fP.
*/
- {"forward_format", DT_STR, R_NONE, UL &ForwFmt, "[%a: %s]"},
+ {"forward_format", DT_STR, UL &ForwFmt, "[%a: %s]"},
/*
** .pp
** This variable controls the default subject when forwarding a message.
** It uses the same format sequences as the ``$$index_format'' variable.
*/
- {"forward_quote", DT_BOOL, R_NONE, OPTFORWQUOTE, "no" },
+ {"forward_quote", DT_BOOL, OPTFORWQUOTE, "no" },
/*
** .pp
** When \fIset\fP forwarded messages included in the main body of the
** message (when ``$$mime_forward'' is \fIunset\fP) will be quoted using
** ``$$indent_string''.
*/
- {"from", DT_ADDR, R_NONE, UL &From, "" },
- /*
- ** .pp
- ** This variable contains a default from address. It
- ** can be overridden using my_hdr (including from send-hooks) and
- ** ``$$reverse_name''. This variable is ignored if ``$$use_from''
- ** is unset.
- ** .pp
- ** E.g. you can use
- ** \fTsend-hook Madmutt-devel@lists.berlios.de 'my_hdr From: Foo Bar <foo@bar.fb>'\fP
- ** when replying to the Madmutt developer's mailing list and Madmutt takes this email address.
- ** .pp
- ** Defaults to the contents of the environment variable \fT$$$EMAIL\fP.
- */
-#ifdef USE_NNTP
- {"nntp_group_index_format", DT_STR, R_BOTH, UL &GroupFormat, "%4C %M%N %5s %-45.45f %d"},
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** This variable allows you to customize the newsgroup browser display to
- ** your personal taste. This string is similar to ``$index_format'', but
- ** has its own set of \fTprintf(3)\fP-like sequences:
- ** .pp
- ** .ts
- ** %C current newsgroup number
- ** %d description of newsgroup (retrieved from server)
- ** %f newsgroup name
- ** %M ``-'' if newsgroup not allowed for direct post (moderated for example)
- ** %N ``N'' if newsgroup is new, ``u'' if unsubscribed, blank otherwise
- ** %n number of new articles in newsgroup
- ** %s number of unread articles in newsgroup
- ** %>X right justify the rest of the string and pad with character "X"
- ** %|X pad to the end of the line with character "X"
- ** .te
- */
-#endif
- {"hdrs", DT_BOOL, R_NONE, OPTHDRS, "yes" },
- /*
- ** .pp
- ** When \fIunset\fP, the header fields normally added by the ``$my_hdr''
- ** command are not created. This variable \fImust\fP be \fIunset\fP before
- ** composing a new message or replying in order to take effect. If \fIset\fP,
- ** the user defined header fields are added to every new message.
- */
- {"header", DT_BOOL, R_NONE, OPTHEADER, "no" },
+ {"header", DT_BOOL, OPTHEADER, "no" },
/*
** .pp
** When \fIset\fP, this variable causes Madmutt to include the header
** of the message you are replying to into the edit buffer.
** The ``$$weed'' setting applies.
*/
- {"help", DT_BOOL, R_BOTH, OPTHELP, "yes" },
- /*
- ** .pp
- ** When \fIset\fP, help lines describing the bindings for the major functions
- ** provided by each menu are displayed on the first line of the screen.
- ** .pp
- ** \fBNote:\fP The binding will not be displayed correctly if the
- ** function is bound to a sequence rather than a single keystroke. Also,
- ** the help line may not be updated if a binding is changed while Madmutt is
- ** running. Since this variable is primarily aimed at new users, neither
- ** of these should present a major problem.
- */
- {"hidden_host", DT_BOOL, R_NONE, OPTHIDDENHOST, "no" },
+ {"hidden_host", DT_BOOL, OPTHIDDENHOST, "no" },
/*
** .pp
** When \fIset\fP, Madmutt will skip the host name part of ``$$hostname'' variable
** affect the generation of \fTMessage-ID:\fP header fields, and it will not lead to the
** cut-off of first-level domains.
*/
- {"hide_limited", DT_BOOL, R_TREE|R_INDEX, OPTHIDELIMITED, "no" },
+ {"hide_limited", DT_BOOL, OPTHIDELIMITED, "no" },
/*
** .pp
** When \fIset\fP, Madmutt will not show the presence of messages that are hidden
** by limiting, in the thread tree.
*/
- {"hide_missing", DT_BOOL, R_TREE|R_INDEX, OPTHIDEMISSING, "yes" },
+ {"hide_missing", DT_BOOL, OPTHIDEMISSING, "yes" },
/*
** .pp
** When \fIset\fP, Madmutt will not show the presence of missing messages in the
** thread tree.
*/
- {"hide_thread_subject", DT_BOOL, R_TREE|R_INDEX, OPTHIDETHREADSUBJECT, "yes" },
+ {"hide_thread_subject", DT_BOOL, OPTHIDETHREADSUBJECT, "yes" },
/*
** .pp
** When \fIset\fP, Madmutt will not show the subject of messages in the thread
** tree that have the same subject as their parent or closest previously
** displayed sibling.
*/
- {"hide_top_limited", DT_BOOL, R_TREE|R_INDEX, OPTHIDETOPLIMITED, "no" },
+ {"hide_top_limited", DT_BOOL, OPTHIDETOPLIMITED, "no" },
/*
** .pp
** When \fIset\fP, Madmutt will not show the presence of messages that are hidden
** by limiting, at the top of threads in the thread tree. Note that when
** $$hide_missing is \fIset\fP, this option will have no effect.
*/
- {"hide_top_missing", DT_BOOL, R_TREE|R_INDEX, OPTHIDETOPMISSING, "yes" },
+ {"hide_top_missing", DT_BOOL, OPTHIDETOPMISSING, "yes" },
/*
** .pp
** When \fIset\fP, Madmutt will not show the presence of missing messages at the
** top of threads in the thread tree. Note that when $$hide_limited is
** \fIset\fP, this option will have no effect.
*/
- {"history", DT_NUM, R_NONE, UL &HistSize, "10" },
+ {"history", DT_NUM, UL &HistSize, "10" },
/*
** .pp
** This variable controls the size (in number of strings remembered) of
** the string history buffer. The buffer is cleared each time the
** variable is changed.
*/
- {"honor_followup_to", DT_QUAD, R_NONE, OPT_MFUPTO, "yes" },
+ {"honor_followup_to", DT_QUAD, OPT_MFUPTO, "yes" },
/*
** .pp
** This variable controls whether or not a \fTMail-Followup-To:\fP header field is
** honored when group-replying to a message.
*/
- {"hostname", DT_STR, R_NONE, UL &Fqdn, "" },
- /*
- ** .pp
- ** Specifies the hostname to use after the ``\fT@\fP'' in local e-mail
- ** addresses and during generation of \fTMessage-ID:\fP headers.
- ** .pp
- ** Please be sure to really know what you are doing when changing this variable
- ** to configure a custom domain part of Message-IDs.
- */
- {"ignore_list_reply_to", DT_BOOL, R_NONE, OPTIGNORELISTREPLYTO, "no" },
+ {"ignore_list_reply_to", DT_BOOL, OPTIGNORELISTREPLYTO, "no" },
/*
** .pp
** Affects the behaviour of the \fIreply\fP function when replying to
** Remember: This option works only for mailing lists which are explicitly set in your madmuttrc
** configuration file.
*/
- {"imap_authenticators", DT_STR, R_NONE, UL &ImapAuthenticators, "" },
+ {"imap_authenticators", DT_STR, UL &ImapAuthenticators, "" },
/*
** .pp
** This is a colon-delimited list of authentication methods Madmutt may
** the previous methods are unavailable. If a method is available but
** authentication fails, Madmutt will not connect to the IMAP server.
*/
- { "imap_check_subscribed", DT_BOOL, R_NONE, OPTIMAPCHECKSUBSCRIBED, "no" },
+ { "imap_check_subscribed", DT_BOOL, OPTIMAPCHECKSUBSCRIBED, "no" },
/*
** .pp
** When \fIset\fP, mutt will fetch the set of subscribed folders from
** your server on connection, and add them to the set of mailboxes
** it polls for new mail. See also the ``$mailboxes'' command.
*/
- {"imap_delim_chars", DT_STR, R_NONE, UL &ImapDelimChars, "/."},
+ {"imap_delim_chars", DT_STR, UL &ImapDelimChars, "/."},
/*
** .pp
** This contains the list of characters which you would like to treat
** as folder separators for displaying IMAP paths. In particular it
** helps in using the '\fT=\fP' shortcut for your $$folder variable.
*/
- {"imap_headers", DT_STR, R_INDEX, UL &ImapHeaders, "" },
+ {"imap_headers", DT_STR, UL &ImapHeaders, "" },
/*
** .pp
** Madmutt requests these header fields in addition to the default headers
** .pp
** \fBNote:\fP This is a space separated list.
*/
- {"imap_home_namespace", DT_STR, R_NONE, UL &ImapHomeNamespace, "" },
- /*
- ** .pp
- ** You normally want to see your personal folders alongside
- ** your \fTINBOX\fP in the IMAP browser. If you see something else, you may set
- ** this variable to the IMAP path to your folders.
- */
- {"imap_keepalive", DT_NUM, R_NONE, UL &ImapKeepalive, "900" },
+ {"imap_keepalive", DT_NUM, UL &ImapKeepalive, "900" },
/*
** .pp
** This variable specifies the maximum amount of time in seconds that Madmutt
** Reduce this number if you find yourself
** getting disconnected from your IMAP server due to inactivity.
*/
- {"imap_login", DT_STR, R_NONE, UL &ImapLogin, "" },
+ {"imap_login", DT_STR, UL &ImapLogin, "" },
/*
** .pp
** Your login name on the IMAP server.
** .pp
** This variable defaults to the value of ``$$imap_user.''
*/
- {"imap_list_subscribed", DT_BOOL, R_NONE, OPTIMAPLSUB, "no" },
+ {"imap_list_subscribed", DT_BOOL, OPTIMAPLSUB, "no" },
/*
** .pp
** This variable configures whether IMAP folder browsing will look for
** only subscribed folders or all folders. This can be toggled in the
** IMAP browser with the \fItoggle-subscribed\fP function.
*/
- {"imap_mail_check", DT_NUM, R_NONE, UL &ImapBuffyTimeout, "300" },
+ {"imap_mail_check", DT_NUM, UL &ImapBuffyTimeout, "300" },
/*
** .pp
** This variable configures how often (in seconds) Madmutt should look for
** new mail in IMAP folders. This is split from the ``$mail_check'' variable
** to generate less traffic and get more accurate information for local folders.
*/
- {"imap_pass", DT_STR, R_NONE, UL &ImapPass, "" },
+ {"imap_pass", DT_STR, UL &ImapPass, "" },
/*
** .pp
** Specifies the password for your IMAP account. If \fIunset\fP, Madmutt will
** fairly secure machine, because the superuser can read your configuration even
** if you are the only one who can read the file.
*/
- {"imap_passive", DT_BOOL, R_NONE, OPTIMAPPASSIVE, "yes" },
+ {"imap_passive", DT_BOOL, OPTIMAPPASSIVE, "yes" },
/*
** .pp
** When \fIset\fP, Madmutt will not open new IMAP connections to check for new
** user/password pairs on Madmutt invocation, or if opening the connection
** is slow.
*/
- {"imap_peek", DT_BOOL, R_NONE, OPTIMAPPEEK, "yes" },
- /*
- ** .pp
- ** If \fIset\fP, Madmutt will avoid implicitly marking your mail as read whenever
- ** you fetch a message from the server. This is generally a good thing,
- ** but can make closing an IMAP folder somewhat slower. This option
- ** exists to appease speed freaks.
- */
- {"imap_reconnect", DT_QUAD, R_NONE, OPT_IMAPRECONNECT, "ask-yes" },
+ {"imap_reconnect", DT_QUAD, OPT_IMAPRECONNECT, "ask-yes" },
/*
** .pp
** Controls whether or not Madmutt will try to reconnect to IMAP server when
** the connection is lost.
*/
- {"imap_servernoise", DT_BOOL, R_NONE, OPTIMAPSERVERNOISE, "yes" },
+ {"imap_servernoise", DT_BOOL, OPTIMAPSERVERNOISE, "yes" },
/*
** .pp
** When \fIset\fP, Madmutt will display warning messages from the IMAP
** server which are out of the users' hands, you may wish to suppress
** them at some point.
*/
- {"imap_user", DT_STR, R_NONE, UL &ImapUser, "" },
+ {"imap_user", DT_STR, UL &ImapUser, "" },
/*
** .pp
** The name of the user whose mail you intend to access on the IMAP
** .pp
** This variable defaults to your user name on the local machine.
*/
- {"implicit_autoview", DT_BOOL, R_NONE, OPTIMPLICITAUTOVIEW, "no" },
+ {"implicit_autoview", DT_BOOL, OPTIMPLICITAUTOVIEW, "no" },
/*
** .pp
** If \fIset\fP, Madmutt will look for a mailcap entry with the
** use the viewer defined in that entry to convert the body part to text
** form.
*/
- {"include", DT_QUAD, R_NONE, OPT_INCLUDE, "ask-yes" },
+ {"include", DT_QUAD, OPT_INCLUDE, "ask-yes" },
/*
** .pp
** Controls whether or not a copy of the message(s) you are replying to
** is included in your reply.
*/
- {"include_onlyfirst", DT_BOOL, R_NONE, OPTINCLUDEONLYFIRST, "no" },
- /*
- ** .pp
- ** Controls whether or not Madmutt includes only the first attachment
- ** of the message you are replying.
- */
- {"indent_string", DT_STR, R_NONE, UL &Prefix, "> "},
+ {"indent_string", DT_STR, UL &Prefix, "> "},
/*
** .pp
** Specifies the string to prepend to each line of text quoted in a
** message to which you are replying. You are strongly encouraged not to
** change this value, as it tends to agitate the more fanatical netizens.
*/
- {"index_format", DT_STR, R_BOTH, UL &HdrFmt, "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"},
+ {"index_format", DT_STR, UL &HdrFmt, "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"},
/*
** .pp
** This variable allows you to customize the message index display to
** .pp
** See also: ``$$to_chars''.
*/
-#ifdef USE_NNTP
- {"nntp_inews", DT_PATH, R_NONE, UL &Inews, ""},
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** If \fIset\fP, specifies the program and arguments used to deliver news posted
- ** by Madmutt. Otherwise, Madmutt posts article using current connection.
- ** The following \fTprintf(3)\fP-style sequence is understood:
- ** .pp
- ** .ts
- ** %s newsserver name
- ** .te
- ** .pp
- ** Example: \fTset inews="/usr/local/bin/inews -hS"\fP
- */
-#endif
- {"ispell", DT_PATH, R_NONE, UL &Ispell, ISPELL},
- /*
- ** .pp
- ** How to invoke ispell (GNU's spell-checking software).
- */
- {"keep_flagged", DT_BOOL, R_NONE, OPTKEEPFLAGGED, "no" },
+ {"keep_flagged", DT_BOOL, OPTKEEPFLAGGED, "no" },
/*
** .pp
** If \fIset\fP, read messages marked as flagged will not be moved
** from your spool mailbox to your ``$$mbox'' mailbox, or as a result of
** a ``$mbox-hook'' command.
*/
- {"locale", DT_STR, R_BOTH, UL &Locale, "C"},
+ {"locale", DT_STR, UL &Locale, "C"},
/*
** .pp
** The locale used by \fTstrftime(3)\fP to format dates. Legal values are
** the strings your system accepts for the locale variable \fTLC_TIME\fP.
*/
- {"force_list_reply", DT_QUAD, R_NONE, OPT_LISTREPLY, "ask-no" },
+ {"force_list_reply", DT_QUAD, OPT_LISTREPLY, "ask-no" },
/*
** .pp
** This variable controls what effect ordinary replies have on mailing list
** messages: if \fIset\fP, a normal reply will be interpreted as list-reply
** while if it's \fIunset\fP the reply functions work as usual.
*/
- {"max_display_recips", DT_NUM, R_PAGER, UL &MaxDispRecips, "0" },
+ {"max_display_recips", DT_NUM, UL &MaxDispRecips, "0" },
/*
** .pp
** When set non-zero, this specifies the maximum number of recipient header
** weeding is turned on. In case the number of lines exeeds its value, the
** last line will have 3 dots appended.
*/
- {"max_line_length", DT_NUM, R_PAGER, UL &MaxLineLength, "0" },
+ {"max_line_length", DT_NUM, UL &MaxLineLength, "0" },
/*
** .pp
** When \fIset\fP, the maximum line length for displaying ``format = flowed'' messages is limited
** to this length. A value of 0 (which is also the default) means that the
** maximum line length is determined by the terminal width and $$wrapmargin.
*/
- {"mail_check", DT_NUM, R_NONE, UL &BuffyTimeout, "5" },
- /*
- ** .pp
- ** This variable configures how often (in seconds) Madmutt should look for
- ** new mail.
- ** .pp
- ** \fBNote:\fP This does not apply to IMAP mailboxes, see $$imap_mail_check.
- */
- {"mailcap_path", DT_STR, R_NONE, UL &MailcapPath, "" },
- /*
- ** .pp
- ** This variable specifies which files to consult when attempting to
- ** display MIME bodies not directly supported by Madmutt.
- */
- {"mailcap_sanitize", DT_BOOL, R_NONE, OPTMAILCAPSANITIZE, "yes" },
- /*
- ** .pp
- ** If \fIset\fP, Madmutt will restrict possible characters in mailcap \fT%\fP expandos
- ** to a well-defined set of safe characters. This is the safe setting,
- ** but we are not sure it doesn't break some more advanced MIME stuff.
- ** .pp
- ** \fBDON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE
- ** DOING!\fP
- */
-#ifdef USE_HCACHE
- {"header_cache", DT_PATH, R_NONE, UL &HeaderCache, "" },
- /*
- ** .pp
- ** Availability: Header Cache
- **
- ** .pp
- ** The $$header_cache variable points to the header cache database.
- ** .pp
- ** If $$header_cache points to a directory it will contain a header cache
- ** database per folder. If $$header_cache points to a file that file will
- ** be a single global header cache. By default it is \fIunset\fP so no
- ** header caching will be used.
- */
- {"maildir_header_cache_verify", DT_BOOL, R_NONE, OPTHCACHEVERIFY, "yes" },
- /*
- ** .pp
- ** Availability: Header Cache
- **
- ** .pp
- ** Check for Maildir unaware programs other than Madmutt having modified maildir
- ** files when the header cache is in use. This incurs one \fTstat(2)\fP per
- ** message every time the folder is opened.
- */
-#if defined(HAVE_GDBM) || defined(HAVE_DB4)
- {"header_cache_pagesize", DT_STR, R_NONE, UL &HeaderCachePageSize, "16384"},
- /*
- ** .pp
- ** Availability: Header Cache
- **
- ** .pp
- ** Change the maildir header cache database page size.
- ** .pp
- ** Too large
- ** or too small of a page size for the common header can waste
- ** space, memory effectiveness, or CPU time. The default should be more or
- ** less the best you can get. For details google for mutt header
- ** cache (first hit).
- */
-#endif /* HAVE_GDBM || HAVE_DB 4 */
-#ifdef HAVE_QDBM
- { "header_cache_compress", DT_BOOL, R_NONE, OPTHCACHECOMPRESS, "no" },
- /*
- ** .pp
- ** If enabled the header cache will be compressed. So only one fifth of the usual
- ** diskspace is used, but the uncompression can result in a slower open of the
- ** cached folder.
- */
-#endif /* HAVE_QDBM */
-#endif /* USE_HCACHE */
- {"maildir_trash", DT_BOOL, R_NONE, OPTMAILDIRTRASH, "no" },
+ {"maildir_trash", DT_BOOL, OPTMAILDIRTRASH, "no" },
/*
** .pp
** If \fIset\fP, messages marked as deleted will be saved with the maildir
** .pp
** It is similiar to the trash option.
*/
- {"mark_old", DT_BOOL, R_BOTH, OPTMARKOLD, "yes" },
+ {"mark_old", DT_BOOL, OPTMARKOLD, "yes" },
/*
** .pp
** Controls whether or not Madmutt marks \fInew\fP \fBunread\fP
** will show up with an "O" next to them in the ``index'' menu,
** indicating that they are old.
*/
- {"markers", DT_BOOL, R_PAGER, OPTMARKERS, "yes" },
+ {"markers", DT_BOOL, OPTMARKERS, "yes" },
/*
** .pp
** Controls the display of wrapped lines in the internal pager. If set, a
** ``\fT+\fP'' marker is displayed at the beginning of wrapped lines. Also see
** the ``$$smart_wrap'' variable.
*/
- {"mask", DT_RX, R_NONE, UL &Mask, "!^\\.[^.]"},
+ {"mask", DT_RX, UL &Mask, "!^\\.[^.]"},
/*
** .pp
** A regular expression used in the file browser, optionally preceded by
** the \fInot\fP operator ``\fT!\fP''. Only files whose names match this mask
** will be shown. The match is always case-sensitive.
*/
- {"mbox", DT_PATH, R_BOTH, UL &Inbox, "~/mbox"},
+ {"mbox", DT_PATH, UL &Inbox, "~/mbox"},
/*
** .pp
** This specifies the folder into which read mail in your ``$$spoolfile''
** folder will be appended.
*/
- {"operating_system", DT_STR, R_NONE, UL &OperatingSystem, "" },
- /*
- ** .pp
- ** This specifies the operating system name for the \fTUser-Agent:\fP header field. If
- ** this is \fIunset\fP, it will be set to the operating system name that \fTuname(2)\fP
- ** returns. If \fTuname(2)\fP fails, ``UNIX'' will be used.
- ** .pp
- ** It may, for example, look as: ``\fTMadmutt 1.5.9i (Linux)\fP''.
- */
- {"sidebar_boundary", DT_STR, R_BOTH, UL &SidebarBoundary, "." },
+ {"sidebar_boundary", DT_STR, UL &SidebarBoundary, "." },
/*
** .pp
** When the sidebar is displayed and $$sidebar_shorten_hierarchy is \fIset\fP, this
** variable specifies the characters at which to split a folder name into
** ``hierarchy items.''
*/
- {"sidebar_delim", DT_STR, R_BOTH, UL &SidebarDelim, "|"},
- /*
- ** .pp
- ** This specifies the delimiter between the sidebar (if visible) and
- ** other screens.
- */
- {"sidebar_visible", DT_BOOL, R_BOTH, OPTMBOXPANE, "no" },
+ {"sidebar_visible", DT_BOOL, OPTMBOXPANE, "no" },
/*
** .pp
** This specifies whether or not to show the sidebar (a list of folders specified
** with the ``mailboxes'' command).
*/
- {"sidebar_width", DT_NUM, R_BOTH, UL &SidebarWidth, "0" },
+ {"sidebar_width", DT_NUM, UL &SidebarWidth, "0" },
/*
** .pp
** The width of the sidebar.
*/
- {"sidebar_newmail_only", DT_BOOL, R_BOTH, OPTSIDEBARNEWMAILONLY, "no" },
+ {"sidebar_newmail_only", DT_BOOL, OPTSIDEBARNEWMAILONLY, "no" },
/*
** .pp
** If \fIset\fP, only folders with new mail will be shown in the sidebar.
*/
- {"sidebar_number_format", DT_STR, R_BOTH, UL &SidebarNumberFormat, "%m%?n?(%n)?%?f?[%f]?"},
+ {"sidebar_number_format", DT_STR, UL &SidebarNumberFormat, "%m%?n?(%n)?%?f?[%f]?"},
/*
** .pp
** This variable controls how message counts are printed when the sidebar
** 1) These expandos only have a non-zero value for the current mailbox and
** will always be zero otherwise.
*/
- {"sidebar_shorten_hierarchy", DT_BOOL, R_NONE, OPTSHORTENHIERARCHY, "no" },
+ {"sidebar_shorten_hierarchy", DT_BOOL, OPTSHORTENHIERARCHY, "no" },
/*
** .pp
** When \fIset\fP, the ``hierarchy'' of the sidebar entries will be shortened
** At which characters this compression is done is controled via the
** $$sidebar_boundary variable.
*/
- {"mbox_type", DT_MAGIC, R_NONE, UL &DefaultMagic, "mbox" },
- /*
- ** .pp
- ** The default mailbox type used when creating new folders. May be any of
- ** \fTmbox\fP, \fTMMDF\fP, \fTMH\fP and \fTMaildir\fP.
- */
- {"metoo", DT_BOOL, R_NONE, OPTMETOO, "no" },
+ {"metoo", DT_BOOL, OPTMETOO, "no" },
/*
** .pp
** If \fIunset\fP, Madmutt will remove your address (see the ``alternates''
** command) from the list of recipients when replying to a message.
*/
- {"menu_context", DT_NUM, R_NONE, UL &MenuContext, "0" },
+ {"menu_context", DT_NUM, UL &MenuContext, "0" },
/*
** .pp
** This variable controls the number of lines of context that are given
** when scrolling through menus. (Similar to ``$$pager_context''.)
*/
- {"menu_move_off", DT_BOOL, R_NONE, OPTMENUMOVEOFF, "yes" },
- /*
- ** .pp
- ** When \fIunset\fP, the bottom entry of menus will never scroll up past
- ** the bottom of the screen, unless there are less entries than lines.
- ** When \fIset\fP, the bottom entry may move off the bottom.
- */
- {"menu_scroll", DT_BOOL, R_NONE, OPTMENUSCROLL, "no" },
- /*
- ** .pp
- ** When \fIset\fP, menus will be scrolled up or down one line when you
- ** attempt to move across a screen boundary. If \fIunset\fP, the screen
- ** is cleared and the next or previous page of the menu is displayed
- ** (useful for slow links to avoid many redraws).
- */
- {"meta_key", DT_BOOL, R_NONE, OPTMETAKEY, "no" },
- /*
- ** .pp
- ** If \fIset\fP, forces Madmutt to interpret keystrokes with the high bit (bit 8)
- ** set as if the user had pressed the \fTESC\fP key and whatever key remains
- ** after having the high bit removed. For example, if the key pressed
- ** has an ASCII value of \fT0xf8\fP, then this is treated as if the user had
- ** pressed \fTESC\fP then ``\fTx\fP''. This is because the result of removing the
- ** high bit from ``\fT0xf8\fP'' is ``\fT0x78\fP'', which is the ASCII character
- ** ``\fTx\fP''.
- */
- {"mh_purge", DT_BOOL, R_NONE, OPTMHPURGE, "no" },
+ {"mh_purge", DT_BOOL, OPTMHPURGE, "no" },
/*
** .pp
** When \fIunset\fP, Madmutt will mimic mh's behaviour and rename deleted messages
** them. If the variable is set, the message files will simply be
** deleted.
*/
- {"mh_seq_flagged", DT_STR, R_NONE, UL &MhFlagged, "flagged"},
+ {"mh_seq_flagged", DT_STR, UL &MhFlagged, "flagged"},
/*
** .pp
** The name of the MH sequence used for flagged messages.
*/
- {"mh_seq_replied", DT_STR, R_NONE, UL &MhReplied, "replied"},
+ {"mh_seq_replied", DT_STR, UL &MhReplied, "replied"},
/*
** .pp
** The name of the MH sequence used to tag replied messages.
*/
- {"mh_seq_unseen", DT_STR, R_NONE, UL &MhUnseen, "unseen"},
+ {"mh_seq_unseen", DT_STR, UL &MhUnseen, "unseen"},
/*
** .pp
** The name of the MH sequence used for unseen messages.
*/
- {"mime_forward", DT_QUAD, R_NONE, OPT_MIMEFWD, "no" },
+ {"mime_forward", DT_QUAD, OPT_MIMEFWD, "no" },
/*
** .pp
** When \fIset\fP, the message you are forwarding will be attached as a
** .pp
** Also see ``$$forward_decode'' and ``$$mime_forward_decode''.
*/
- {"mime_forward_decode", DT_BOOL, R_NONE, OPTMIMEFORWDECODE, "no" },
+ {"mime_forward_decode", DT_BOOL, OPTMIMEFORWDECODE, "no" },
/*
** .pp
** Controls the decoding of complex MIME messages into \fTtext/plain\fP when
** forwarding a message while ``$$mime_forward'' is \fIset\fP. Otherwise
** ``$$forward_decode'' is used instead.
*/
- {"mime_forward_rest", DT_QUAD, R_NONE, OPT_MIMEFWDREST, "yes" },
+ {"mime_forward_rest", DT_QUAD, OPT_MIMEFWDREST, "yes" },
/*
** .pp
** When forwarding multiple attachments of a MIME message from the recvattach
** menu, attachments which cannot be decoded in a reasonable manner will
** be attached to the newly composed message if this option is set.
*/
-#ifdef USE_NNTP
- {"nntp_mime_subject", DT_BOOL, R_NONE, OPTMIMESUBJECT, "yes" },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** If \fIunset\fP, an 8-bit ``\fTSubject:\fP'' header field in a news article
- ** will not be encoded according to RFC2047.
- ** .pp
- ** \fBNote:\fP Only change this setting if you know what you are doing.
- */
-#endif
- {"mix_entry_format", DT_STR, R_NONE, UL &MixEntryFormat, "%4n %c %-16s %a"},
- /*
- ** .pp
- ** This variable describes the format of a remailer line on the mixmaster
- ** chain selection screen. The following \fTprintf(3)\fP-like sequences are
- ** supported:
- ** .pp
- ** .dl
- ** .dt %n .dd The running number on the menu.
- ** .dt %c .dd Remailer capabilities.
- ** .dt %s .dd The remailer's short name.
- ** .dt %a .dd The remailer's e-mail address.
- ** .de
- */
- {"mixmaster", DT_PATH, R_NONE, UL &Mixmaster, MIXMASTER},
- /*
- ** .pp
- ** This variable contains the path to the Mixmaster binary on your
- ** system. It is used with various sets of parameters to gather the
- ** list of known remailers, and to finally send a message through the
- ** mixmaster chain.
- */
- {"move", DT_QUAD, R_NONE, OPT_MOVE, "ask-no" },
+ {"move", DT_QUAD, OPT_MOVE, "ask-no" },
/*
** .pp
** Controls whether or not Madmutt will move read messages
** from your spool mailbox to your ``$$mbox'' mailbox, or as a result of
** a ``$mbox-hook'' command.
*/
- {"message_format", DT_STR, R_NONE, UL &MsgFmt, "%s"},
+ {"message_format", DT_STR, UL &MsgFmt, "%s"},
/*
** .pp
** This is the string displayed in the ``attachment'' menu for
** attachments of type \fTmessage/rfc822\fP. For a full listing of defined
** \fTprintf(3)\fP-like sequences see the section on ``$$index_format''.
*/
- {"msgid_format", DT_STR, R_NONE, UL &MsgIdFormat, "%Y%m%d%h%M%s.G%P%p"},
+ {"msgid_format", DT_STR, UL &MsgIdFormat, "%Y%m%d%h%M%s.G%P%p"},
/*
** .pp
** This is the format for the ``local part'' of the \fTMessage-ID:\fP header
** \fBNote:\fP Please only change this setting if you know what you are doing.
** Also make sure to consult RFC2822 to produce technically \fIvalid\fP strings.
*/
- {"narrow_tree", DT_BOOL, R_TREE|R_INDEX, OPTNARROWTREE, "no" },
+ {"narrow_tree", DT_BOOL, OPTNARROWTREE, "no" },
/*
** .pp
** This variable, when \fIset\fP, makes the thread tree narrower, allowing
** deeper threads to fit on the screen.
*/
-#ifdef USE_NNTP
- {"nntp_cache_dir", DT_PATH, R_NONE, UL &NewsCacheDir, "~/.madmutt"},
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** This variable points to directory where Madmutt will cache news
- ** article headers. If \fIunset\fP, headers will not be saved at all
- ** and will be reloaded each time when you enter a newsgroup.
- ** .pp
- ** As for the header caching in connection with IMAP and/or Maildir,
- ** this drastically increases speed and lowers traffic.
- */
- {"nntp_host", DT_STR, R_NONE, UL &NewsServer, "" },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** This variable specifies the name (or address) of the NNTP server to be used.
- ** .pp
- ** It
- ** defaults to the value specified via the environment variable
- ** \fT$$$NNTPSERVER\fP or contained in the file \fT/etc/nntpserver\fP.
- ** .pp
- ** You can also
- ** specify a username and an alternative port for each newsserver, e.g.
- ** .pp
- ** \fT[nntp[s]://][username[:password]@]newsserver[:port]\fP
- ** .pp
- ** \fBNote:\fP Using a password as shown and stored in a configuration file
- ** presents a security risk since the superuser of your machine may read it
- ** regardless of the file's permissions.
- */
- {"nntp_newsrc", DT_PATH, R_NONE, UL &NewsRc, "~/.newsrc"},
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** This file contains information about subscribed newsgroup and
- ** articles read so far.
- ** .pp
- ** To ease the use of multiple news servers, the following \fTprintf(3)\fP-style
- ** sequence is understood:
- ** .pp
- ** .ts
- ** %s newsserver name
- ** .te
- */
- {"nntp_context", DT_NUM, R_NONE, UL &NntpContext, "1000" },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** This variable controls how many news articles to cache per newsgroup
- ** (if caching is enabled, see $$nntp_cache_dir) and how many news articles
- ** to show in the ``index'' menu.
- ** .pp
- ** If there're more articles than defined with $$nntp_context, all older ones
- ** will be removed/not shown in the index.
- */
- {"nntp_load_description", DT_BOOL, R_NONE, OPTLOADDESC, "yes" },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** This variable controls whether or not descriptions for newsgroups
- ** are to be loaded when subscribing to a newsgroup.
- */
- {"nntp_user", DT_STR, R_NONE, UL &NntpUser, ""},
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** Your login name on the NNTP server. If \fIunset\fP and the server requires
- ** authentification, Madmutt will prompt you for your account name.
- */
- {"nntp_pass", DT_STR, R_NONE, UL &NntpPass, ""},
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** Your password for NNTP account.
- ** .pp
- ** \fBNote:\fP Storing passwords in a configuration file
- ** presents a security risk since the superuser of your machine may read it
- ** regardless of the file's permissions.
- */
- {"nntp_mail_check", DT_NUM, R_NONE, UL &NewsPollTimeout, "60" },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** The time in seconds until any operations on a newsgroup except posting a new
- ** article will cause a recheck for new news. If set to 0, Madmutt will
- ** recheck on each operation in index (stepping, read article, etc.).
- */
- {"nntp_reconnect", DT_QUAD, R_NONE, OPT_NNTPRECONNECT, "ask-yes" },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** Controls whether or not Madmutt will try to reconnect to a newsserver when the
- ** was connection lost.
- */
-#endif
- { "net_inc", DT_NUM, R_NONE, UL &NetInc, "10" },
+ { "net_inc", DT_NUM, UL &NetInc, "10" },
/*
** .pp
** Operations that expect to transfer a large amount of data over the
** .pp
** See also ``$$read_inc'' and ``$$write_inc''.
*/
- {"pager", DT_PATH, R_NONE, UL &Pager, "builtin"},
- /*
- ** .pp
- ** This variable specifies which pager you would like to use to view
- ** messages. ``builtin'' means to use the builtin pager, otherwise this
- ** variable should specify the pathname of the external pager you would
- ** like to use.
- ** .pp
- ** Using an external pager may have some disadvantages: Additional
- ** keystrokes are necessary because you can't call Madmutt functions
- ** directly from the pager, and screen resizes cause lines longer than
- ** the screen width to be badly formatted in the help menu.
- */
- {"pager_context", DT_NUM, R_NONE, UL &PagerContext, "0" },
+ {"pager_context", DT_NUM, UL &PagerContext, "0" },
/*
** .pp
** This variable controls the number of lines of context that are given
** default, Madmutt will display the line after the last one on the screen
** at the top of the next page (0 lines of context).
*/
- {"pager_format", DT_STR, R_PAGER, UL &PagerFmt, "-%Z- %C/%m: %-20.20n %s"},
+ {"pager_format", DT_STR, UL &PagerFmt, "-%Z- %C/%m: %-20.20n %s"},
/*
** .pp
** This variable controls the format of the one-line message ``status''
** pager. The valid sequences are listed in the ``$$index_format''
** section.
*/
- {"pager_index_lines", DT_NUM, R_PAGER, UL &PagerIndexLines, "0" },
+ {"pager_index_lines", DT_NUM, UL &PagerIndexLines, "0" },
/*
** .pp
** Determines the number of lines of a mini-index which is shown when in
** is less than \fIpager_index_lines\fP, then the index will only use as
** many lines as it needs.
*/
- {"pager_stop", DT_BOOL, R_NONE, OPTPAGERSTOP, "no" },
+ {"pager_stop", DT_BOOL, OPTPAGERSTOP, "no" },
/*
** .pp
** When \fIset\fP, the internal-pager will \fBnot\fP move to the next message
** when you are at the end of a message and invoke the \fInext-page\fP
** function.
*/
- {"crypt_autosign", DT_BOOL, R_NONE, OPTCRYPTAUTOSIGN, "no" },
+ {"pgp_retainable_sigs", DT_BOOL, OPTPGPRETAINABLESIG, "no" },
/*
** .pp
- ** Setting this variable will cause Madmutt to always attempt to
- ** cryptographically sign outgoing messages. This can be overridden
- ** by use of the \fIpgp-menu\fP, when signing is not required or
- ** encryption is requested as well. If ``$$smime_is_default'' is \fIset\fP,
- ** then OpenSSL is used instead to create S/MIME messages and settings can
- ** be overridden by use of the \fIsmime-menu\fP.
- ** (Crypto only)
+ ** If \fIset\fP, signed and encrypted messages will consist of nested
+ ** multipart/signed and multipart/encrypted body parts.
+ ** .pp
+ ** This is useful for applications like encrypted and signed mailing
+ ** lists, where the outer layer (multipart/encrypted) can be easily
+ ** removed, while the inner multipart/signed part is retained.
+ ** (PGP only)
*/
- {"crypt_autoencrypt", DT_BOOL, R_NONE, OPTCRYPTAUTOENCRYPT, "no" },
+ {"pgp_show_unusable", DT_BOOL, OPTPGPSHOWUNUSABLE, "yes" },
/*
** .pp
- ** Setting this variable will cause Madmutt to always attempt to PGP
- ** encrypt outgoing messages. This is probably only useful in
- ** connection to the \fIsend-hook\fP command. It can be overridden
- ** by use of the \fIpgp-menu\fP, when encryption is not required or
- ** signing is requested as well. If ``$$smime_is_default'' is \fIset\fP,
- ** then OpenSSL is used instead to create S/MIME messages and
- ** settings can be overridden by use of the \fIsmime-menu\fP.
- ** (Crypto only)
+ ** If \fIset\fP, Madmutt will display non-usable keys on the PGP key selection
+ ** menu. This includes keys which have been revoked, have expired, or
+ ** have been marked as ``disabled'' by the user.
+ ** (PGP only)
*/
- {"pgp_ignore_subkeys", DT_BOOL, R_NONE, OPTPGPIGNORESUB, "yes" },
+ {"pgp_sign_as", DT_STR, UL &PgpSignAs, "" },
/*
** .pp
- ** Setting this variable will cause Madmutt to ignore OpenPGP subkeys. Instead,
- ** the principal key will inherit the subkeys' capabilities. \fIUnset\fP this
- ** if you want to play interesting key selection games.
+ ** If you have more than one key pair, this option allows you to specify
+ ** which of your private keys to use. It is recommended that you use the
+ ** keyid form to specify your key (e.g., ``\fT0x00112233\fP'').
** (PGP only)
*/
- {"crypt_replyencrypt", DT_BOOL, R_NONE, OPTCRYPTREPLYENCRYPT, "yes" },
- /*
- ** .pp
- ** If \fIset\fP, automatically PGP or OpenSSL encrypt replies to messages which are
- ** encrypted.
- ** (Crypto only)
- */
- {"crypt_replysign", DT_BOOL, R_NONE, OPTCRYPTREPLYSIGN, "no" },
- /*
- ** .pp
- ** If \fIset\fP, automatically PGP or OpenSSL sign replies to messages which are
- ** signed.
- ** .pp
- ** \fBNote:\fP this does not work on messages that are encrypted \fBand\fP signed!
- ** (Crypto only)
- */
- {"crypt_replysignencrypted", DT_BOOL, R_NONE, OPTCRYPTREPLYSIGNENCRYPTED, "no" },
- /*
- ** .pp
- ** If \fIset\fP, automatically PGP or OpenSSL sign replies to messages
- ** which are encrypted. This makes sense in combination with
- ** ``$$crypt_replyencrypt'', because it allows you to sign all
- ** messages which are automatically encrypted. This works around
- ** the problem noted in ``$$crypt_replysign'', that Madmutt is not able
- ** to find out whether an encrypted message is also signed.
- ** (Crypto only)
- */
- {"crypt_timestamp", DT_BOOL, R_NONE, OPTCRYPTTIMESTAMP, "yes" },
- /*
- ** .pp
- ** If \fIset\fP, Madmutt will include a time stamp in the lines surrounding
- ** PGP or S/MIME output, so spoofing such lines is more difficult.
- ** If you are using colors to mark these lines, and rely on these,
- ** you may \fIunset\fP this setting.
- ** (Crypto only)
- */
- {"pgp_use_gpg_agent", DT_BOOL, R_NONE, OPTUSEGPGAGENT, "no" },
- /*
- ** .pp
- ** If \fIset\fP, Madmutt will use a possibly-running gpg-agent process.
- ** (PGP only)
- */
- {"crypt_verify_sig", DT_QUAD, R_NONE, OPT_VERIFYSIG, "yes" },
- /*
- ** .pp
- ** If ``\fIyes\fP'', always attempt to verify PGP or S/MIME signatures.
- ** If ``\fIask\fP'', ask whether or not to verify the signature.
- ** If ``\fIno\fP'', never attempt to verify cryptographic signatures.
- ** (Crypto only)
- */
- {"smime_is_default", DT_BOOL, R_NONE, OPTSMIMEISDEFAULT, "no" },
- /*
- ** .pp
- ** The default behaviour of Madmutt is to use PGP on all auto-sign/encryption
- ** operations. To override and to use OpenSSL instead this must be \fIset\fP.
- ** .pp
- ** However, this has no effect while replying, since Madmutt will automatically
- ** select the same application that was used to sign/encrypt the original
- ** message.
- ** .pp
- ** (Note that this variable can be overridden by unsetting $$crypt_autosmime.)
- ** (S/MIME only)
- */
- {"smime_ask_cert_label", DT_BOOL, R_NONE, OPTASKCERTLABEL, "yes" },
- /*
- ** .pp
- ** This flag controls whether you want to be asked to enter a label
- ** for a certificate about to be added to the database or not. It is
- ** \fIset\fP by default.
- ** (S/MIME only)
- */
- {"smime_decrypt_use_default_key", DT_BOOL, R_NONE, OPTSDEFAULTDECRYPTKEY, "yes" },
- /*
- ** .pp
- ** If \fIset\fP (default) this tells Madmutt to use the default key for decryption. Otherwise,
- ** if manage multiple certificate-key-pairs, Madmutt will try to use the mailbox-address
- ** to determine the key to use. It will ask you to supply a key, if it can't find one.
- ** (S/MIME only)
- */
- {"pgp_entry_format", DT_STR, R_NONE, UL &PgpEntryFormat, "%4n %t%f %4l/0x%k %-4a %2c %u"},
- /*
- ** .pp
- ** This variable allows you to customize the PGP key selection menu to
- ** your personal taste. This string is similar to ``$$index_format'', but
- ** has its own set of \fTprintf(3)\fP-like sequences:
- ** .pp
- ** .dl
- ** .dt %n .dd number
- ** .dt %k .dd key id
- ** .dt %u .dd user id
- ** .dt %a .dd algorithm
- ** .dt %l .dd key length
- ** .dt %f .dd flags
- ** .dt %c .dd capabilities
- ** .dt %t .dd trust/validity of the key-uid association
- ** .dt %[<s>] .dd date of the key where <s> is an \fTstrftime(3)\fP expression
- ** .de
- ** .pp
- ** (PGP only)
- */
- {"pgp_good_sign", DT_RX, R_NONE, UL &PgpGoodSign, "" },
- /*
- ** .pp
- ** If you assign a text to this variable, then a PGP signature is only
- ** considered verified if the output from $$pgp_verify_command contains
- ** the text. Use this variable if the exit code from the command is 0
- ** even for bad signatures.
- ** (PGP only)
- */
- {"pgp_check_exit", DT_BOOL, R_NONE, OPTPGPCHECKEXIT, "yes" },
- /*
- ** .pp
- ** If \fIset\fP, Madmutt will check the exit code of the PGP subprocess when
- ** signing or encrypting. A non-zero exit code means that the
- ** subprocess failed.
- ** (PGP only)
- */
- {"pgp_long_ids", DT_BOOL, R_NONE, OPTPGPLONGIDS, "no" },
- /*
- ** .pp
- ** If \fIset\fP, use 64 bit PGP key IDs. \fIUnset\fP uses the normal 32 bit Key IDs.
- ** (PGP only)
- */
- {"pgp_retainable_sigs", DT_BOOL, R_NONE, OPTPGPRETAINABLESIG, "no" },
- /*
- ** .pp
- ** If \fIset\fP, signed and encrypted messages will consist of nested
- ** multipart/signed and multipart/encrypted body parts.
- ** .pp
- ** This is useful for applications like encrypted and signed mailing
- ** lists, where the outer layer (multipart/encrypted) can be easily
- ** removed, while the inner multipart/signed part is retained.
- ** (PGP only)
- */
- {"pgp_autoinline", DT_BOOL, R_NONE, OPTPGPAUTOINLINE, "no" },
- /*
- ** .pp
- ** This option controls whether Madmutt generates old-style inline
- ** (traditional) PGP encrypted or signed messages under certain
- ** circumstances. This can be overridden by use of the \fIpgp-menu\fP,
- ** when inline is not required.
- ** .pp
- ** Note that Madmutt might automatically use PGP/MIME for messages
- ** which consist of more than a single MIME part. Madmutt can be
- ** configured to ask before sending PGP/MIME messages when inline
- ** (traditional) would not work.
- ** See also: ``$$pgp_mime_auto''.
- ** .pp
- ** Also note that using the old-style PGP message format is \fBstrongly\fP
- ** \fBdeprecated\fP.
- ** (PGP only)
- */
- {"pgp_replyinline", DT_BOOL, R_NONE, OPTPGPREPLYINLINE, "no" },
- /*
- ** .pp
- ** Setting this variable will cause Madmutt to always attempt to
- ** create an inline (traditional) message when replying to a
- ** message which is PGP encrypted/signed inline. This can be
- ** overridden by use of the \fIpgp-menu\fP, when inline is not
- ** required. This option does not automatically detect if the
- ** (replied-to) message is inline; instead it relies on Madmutt
- ** internals for previously checked/flagged messages.
- ** .pp
- ** Note that Madmutt might automatically use PGP/MIME for messages
- ** which consist of more than a single MIME part. Madmutt can be
- ** configured to ask before sending PGP/MIME messages when inline
- ** (traditional) would not work.
- ** See also: ``$$pgp_mime_auto''.
- ** .pp
- ** Also note that using the old-style PGP message format is \fBstrongly\fP
- ** \fBdeprecated\fP.
- ** (PGP only)
- **
- */
- {"pgp_show_unusable", DT_BOOL, R_NONE, OPTPGPSHOWUNUSABLE, "yes" },
- /*
- ** .pp
- ** If \fIset\fP, Madmutt will display non-usable keys on the PGP key selection
- ** menu. This includes keys which have been revoked, have expired, or
- ** have been marked as ``disabled'' by the user.
- ** (PGP only)
- */
- {"pgp_sign_as", DT_STR, R_NONE, UL &PgpSignAs, "" },
- /*
- ** .pp
- ** If you have more than one key pair, this option allows you to specify
- ** which of your private keys to use. It is recommended that you use the
- ** keyid form to specify your key (e.g., ``\fT0x00112233\fP'').
- ** (PGP only)
- */
- {"pgp_strict_enc", DT_BOOL, R_NONE, OPTPGPSTRICTENC, "yes" },
- /*
- ** .pp
- ** If \fIset\fP, Madmutt will automatically encode PGP/MIME signed messages as
- ** \fTquoted-printable\fP. Please note that unsetting this variable may
- ** lead to problems with non-verifyable PGP signatures, so only change
- ** this if you know what you are doing.
- ** (PGP only)
- */
- {"pgp_timeout", DT_NUM, R_NONE, UL &PgpTimeout, "300" },
- /*
- ** .pp
- ** The number of seconds after which a cached passphrase will expire if
- ** not used. Default: 300.
- ** (PGP only)
- */
- {"pgp_sort_keys", DT_SORT|DT_SORT_KEYS, R_NONE, UL &PgpSortKeys, "address" },
+ {"pgp_sort_keys", DT_SORT|DT_SORT_KEYS, UL &PgpSortKeys, "address" },
/*
** .pp
** Specifies how the entries in the ``pgp keys'' menu are sorted. The
** ``reverse-''.
** (PGP only)
*/
- {"pgp_mime_auto", DT_QUAD, R_NONE, OPT_PGPMIMEAUTO, "ask-yes" },
- /*
- ** .pp
- ** This option controls whether Madmutt will prompt you for
- ** automatically sending a (signed/encrypted) message using
- ** PGP/MIME when inline (traditional) fails (for any reason).
- ** .pp
- ** Also note that using the old-style PGP message format is \fBstrongly\fP
- ** \fBdeprecated\fP.
- ** (PGP only)
- */
- {"pgp_auto_decode", DT_BOOL, R_NONE, OPTPGPAUTODEC, "no" },
- /*
- ** .pp
- ** If \fIset\fP, Madmutt will automatically attempt to decrypt traditional PGP
- ** messages whenever the user performs an operation which ordinarily would
- ** result in the contents of the message being operated on. For example,
- ** if the user displays a pgp-traditional message which has not been manually
- ** checked with the check-traditional-pgp function, Madmutt will automatically
- ** check the message for traditional pgp.
- */
- /* XXX Default values! */
- {"pgp_decode_command", DT_STR, R_NONE, UL &PgpDecodeCommand, "" },
- /*
- ** .pp
- ** This format strings specifies a command which is used to decode
- ** application/pgp attachments.
- ** .pp
- ** The PGP command formats have their own set of \fTprintf(3)\fP-like sequences:
- ** .pp
- ** .dl
- ** .dt %p .dd Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty
- ** string otherwise. Note: This may be used with a %? construct.
- ** .dt %f .dd Expands to the name of a file containing a message.
- ** .dt %s .dd Expands to the name of a file containing the signature part
- ** . of a multipart/signed attachment when verifying it.
- ** .dt %a .dd The value of $$pgp_sign_as.
- ** .dt %r .dd One or more key IDs.
- ** .de
- ** .pp
- ** For examples on how to configure these formats for the various versions
- ** of PGP which are floating around, see the pgp*.rc and gpg.rc files in
- ** the \fTsamples/\fP subdirectory which has been installed on your system
- ** alongside the documentation.
- ** (PGP only)
- */
- {"pgp_getkeys_command", DT_STR, R_NONE, UL &PgpGetkeysCommand, "" },
- /*
- ** .pp
- ** This command is invoked whenever Madmutt will need public key information.
- ** \fT%r\fP is the only \fTprintf(3)\fP-like sequence used with this format.
- ** (PGP only)
- */
- {"pgp_verify_command", DT_STR, R_NONE, UL &PgpVerifyCommand, "" },
- /*
- ** .pp
- ** This command is used to verify PGP signatures.
- ** (PGP only)
- */
- {"pgp_decrypt_command", DT_STR, R_NONE, UL &PgpDecryptCommand, "" },
- /*
- ** .pp
- ** This command is used to decrypt a PGP encrypted message.
- ** (PGP only)
- */
- {"pgp_clearsign_command", DT_STR, R_NONE, UL &PgpClearSignCommand, "" },
- /*
- ** .pp
- ** This format is used to create a old-style ``clearsigned'' PGP message.
- ** .pp
- ** Note that the use of this format is \fBstrongly\fP \fBdeprecated\fP.
- ** (PGP only)
- */
- {"pgp_sign_command", DT_STR, R_NONE, UL &PgpSignCommand, "" },
- /*
- ** .pp
- ** This command is used to create the detached PGP signature for a
- ** multipart/signed PGP/MIME body part.
- ** (PGP only)
- */
- {"pgp_encrypt_sign_command", DT_STR, R_NONE, UL &PgpEncryptSignCommand, "" },
- /*
- ** .pp
- ** This command is used to both sign and encrypt a body part.
- ** (PGP only)
- */
- {"pgp_encrypt_only_command", DT_STR, R_NONE, UL &PgpEncryptOnlyCommand, "" },
- /*
- ** .pp
- ** This command is used to encrypt a body part without signing it.
- ** (PGP only)
- */
- {"pgp_import_command", DT_STR, R_NONE, UL &PgpImportCommand, "" },
- /*
- ** .pp
- ** This command is used to import a key from a message into
- ** the user's public key ring.
- ** (PGP only)
- */
- {"pgp_export_command", DT_STR, R_NONE, UL &PgpExportCommand, "" },
- /*
- ** .pp
- ** This command is used to export a public key from the user's
- ** key ring.
- ** (PGP only)
- */
- {"pgp_verify_key_command", DT_STR, R_NONE, UL &PgpVerifyKeyCommand, "" },
- /*
- ** .pp
- ** This command is used to verify key information from the key selection
- ** menu.
- ** (PGP only)
- */
- {"pgp_list_secring_command", DT_STR, R_NONE, UL &PgpListSecringCommand, "" },
- /*
- ** .pp
- ** This command is used to list the secret key ring's contents. The
- ** output format must be analogous to the one used by
- ** \fTgpg --list-keys --with-colons\fP.
- ** .pp
- ** This format is also generated by the \fTpgpring\fP utility which comes
- ** with Madmutt.
- ** (PGP only)
- */
- {"pgp_list_pubring_command", DT_STR, R_NONE, UL &PgpListPubringCommand, "" },
- /*
- ** .pp
- ** This command is used to list the public key ring's contents. The
- ** output format must be analogous to the one used by
- ** \fTgpg --list-keys --with-colons\fP.
- ** .pp
- ** This format is also generated by the \fTpgpring\fP utility which comes
- ** with Madmutt.
- ** (PGP only)
- */
- {"forward_decrypt", DT_BOOL, R_NONE, OPTFORWDECRYPT, "yes" },
+ {"forward_decrypt", DT_BOOL, OPTFORWDECRYPT, "yes" },
/*
** .pp
** Controls the handling of encrypted messages when forwarding a message.
** ``$$mime_forward_decode'' is \fIunset\fP.
** (PGP only)
*/
- {"smime_timeout", DT_NUM, R_NONE, UL &SmimeTimeout, "300" },
- /*
- ** .pp
- ** The number of seconds after which a cached passphrase will expire if
- ** not used.
- ** (S/MIME only)
- */
- {"smime_encrypt_with", DT_STR, R_NONE, UL &SmimeCryptAlg, "" },
+ {"smime_encrypt_with", DT_STR, UL &SmimeCryptAlg, "" },
/*
** .pp
** This sets the algorithm that should be used for encryption.
** If \fIunset\fP ``\fI3des\fP'' (TripleDES) is used.
** (S/MIME only)
*/
- {"smime_keys", DT_PATH, R_NONE, UL &SmimeKeys, "" },
- /*
- ** .pp
- ** Since there is no pubring/secring as with PGP, Madmutt has to handle
- ** storage ad retrieval of keys/certs by itself. This is very basic right now,
- ** and stores keys and certificates in two different directories, both
- ** named as the hash-value retrieved from OpenSSL. There is an index file
- ** which contains mailbox-address keyid pair, and which can be manually
- ** edited. This one points to the location of the private keys.
- ** (S/MIME only)
- */
- {"smime_ca_location", DT_PATH, R_NONE, UL &SmimeCALocation, "" },
- /*
- ** .pp
- ** This variable contains the name of either a directory, or a file which
- ** contains trusted certificates for use with OpenSSL.
- ** (S/MIME only)
- */
- {"smime_certificates", DT_PATH, R_NONE, UL &SmimeCertificates, "" },
- /*
- ** .pp
- ** Since there is no pubring/secring as with PGP, Madmutt has to handle
- ** storage and retrieval of keys by itself. This is very basic right
- ** now, and keys and certificates are stored in two different
- ** directories, both named as the hash-value retrieved from
- ** OpenSSL. There is an index file which contains mailbox-address
- ** keyid pairs, and which can be manually edited. This one points to
- ** the location of the certificates.
- ** (S/MIME only)
- */
- {"smime_decrypt_command", DT_STR, R_NONE, UL &SmimeDecryptCommand, "" },
- /*
- ** .pp
- ** This format string specifies a command which is used to decrypt
- ** \fTapplication/x-pkcs7-mime\fP attachments.
- ** .pp
- ** The OpenSSL command formats have their own set of \fTprintf(3)\fP-like sequences
- ** similar to PGP's:
- ** .pp
- ** .dl
- ** .dt %f .dd Expands to the name of a file containing a message.
- ** .dt %s .dd Expands to the name of a file containing the signature part
- ** . of a multipart/signed attachment when verifying it.
- ** .dt %k .dd The key-pair specified with $$smime_default_key
- ** .dt %c .dd One or more certificate IDs.
- ** .dt %a .dd The algorithm used for encryption.
- ** .dt %C .dd CA location: Depending on whether $$smime_ca_location
- ** . points to a directory or file, this expands to
- ** . "-CApath $$smime_ca_location" or "-CAfile $$smime_ca_location".
- ** .de
- ** .pp
- ** For examples on how to configure these formats, see the smime.rc in
- ** the \fTsamples/\fP subdirectory which has been installed on your system
- ** alongside the documentation.
- ** (S/MIME only)
- */
- {"smime_verify_command", DT_STR, R_NONE, UL &SmimeVerifyCommand, "" },
- /*
- ** .pp
- ** This command is used to verify S/MIME signatures of type \fTmultipart/signed\fP.
- ** (S/MIME only)
- */
- {"smime_verify_opaque_command", DT_STR, R_NONE, UL &SmimeVerifyOpaqueCommand, "" },
- /*
- ** .pp
- ** This command is used to verify S/MIME signatures of type
- ** \fTapplication/x-pkcs7-mime\fP.
- ** (S/MIME only)
- */
- {"smime_sign_command", DT_STR, R_NONE, UL &SmimeSignCommand, "" },
- /*
- ** .pp
- ** This command is used to created S/MIME signatures of type
- ** \fTmultipart/signed\fP, which can be read by all mail clients.
- ** (S/MIME only)
- */
- {"smime_sign_opaque_command", DT_STR, R_NONE, UL &SmimeSignOpaqueCommand, "" },
- /*
- ** .pp
- ** This command is used to created S/MIME signatures of type
- ** \fTapplication/x-pkcs7-signature\fP, which can only be handled by mail
- ** clients supporting the S/MIME extension.
- ** (S/MIME only)
- */
- {"smime_encrypt_command", DT_STR, R_NONE, UL &SmimeEncryptCommand, "" },
- /*
- ** .pp
- ** This command is used to create encrypted S/MIME messages.
- ** (S/MIME only)
- */
- {"smime_pk7out_command", DT_STR, R_NONE, UL &SmimePk7outCommand, "" },
- /*
- ** .pp
- ** This command is used to extract PKCS7 structures of S/MIME signatures,
- ** in order to extract the public X509 certificate(s).
- ** (S/MIME only)
- */
- {"smime_get_cert_command", DT_STR, R_NONE, UL &SmimeGetCertCommand, "" },
- /*
- ** .pp
- ** This command is used to extract X509 certificates from a PKCS7 structure.
- ** (S/MIME only)
- */
- {"smime_get_signer_cert_command", DT_STR, R_NONE, UL &SmimeGetSignerCertCommand, "" },
- /*
- ** .pp
- ** This command is used to extract only the signers X509 certificate from a S/MIME
- ** signature, so that the certificate's owner may get compared to the
- ** email's ``\fTFrom:\fP'' header field.
- ** (S/MIME only)
- */
- {"smime_import_cert_command", DT_STR, R_NONE, UL &SmimeImportCertCommand, "" },
- /*
- ** .pp
- ** This command is used to import a certificate via \fTsmime_keysng\fP.
- ** (S/MIME only)
- */
- {"smime_get_cert_email_command", DT_STR, R_NONE, UL &SmimeGetCertEmailCommand, "" },
- /*
- ** .pp
- ** This command is used to extract the mail address(es) used for storing
- ** X509 certificates, and for verification purposes (to check whether the
- ** certificate was issued for the sender's mailbox).
- ** (S/MIME only)
- */
- {"smime_default_key", DT_STR, R_NONE, UL &SmimeDefaultKey, "" },
+ {"smime_default_key", DT_STR, UL &SmimeDefaultKey, "" },
/*
** .pp
** This is the default key-pair to use for signing. This must be set to the
** keyid (the hash-value that OpenSSL generates) to work properly
** (S/MIME only)
*/
-#if defined(USE_LIBESMTP)
- {"smtp_user", DT_STR, R_NONE, UL &SmtpAuthUser, "" },
- /*
- ** .pp
- ** Availability: SMTP
- **
- ** .pp
- ** Defines the username to use with SMTP AUTH. Setting this variable will
- ** cause Madmutt to attempt to use SMTP AUTH when sending.
- */
- {"smtp_pass", DT_STR, R_NONE, UL &SmtpAuthPass, "" },
- /*
- ** .pp
- ** Availability: SMTP
- **
- ** .pp
- ** Defines the password to use with SMTP AUTH. If ``$$smtp_user''
- ** is set, but this variable is not, you will be prompted for a password
- ** when sending.
- ** .pp
- ** \fBNote:\fP Storing passwords in a configuration file
- ** presents a security risk since the superuser of your machine may read it
- ** regardless of the file's permissions.
- */
- {"smtp_host", DT_STR, R_NONE, UL &SmtpHost, "" },
- /*
- ** .pp
- ** Availability: SMTP
- **
- ** .pp
- ** Defines the SMTP host which will be used to deliver mail, as opposed
- ** to invoking the sendmail binary. Setting this variable overrides the
- ** value of ``$$sendmail'', and any associated variables.
- */
- {"smtp_port", DT_NUM, R_NONE, UL &SmtpPort, "25" },
- /*
- ** .pp
- ** Availability: SMTP
- **
- ** .pp
- ** Defines the port that the SMTP host is listening on for mail delivery.
- ** Must be specified as a number.
- ** .pp
- ** Defaults to 25, the standard SMTP port, but RFC 2476-compliant SMTP
- ** servers will probably desire 587, the mail submission port.
- */
- {"smtp_use_tls", DT_STR, R_NONE, UL &SmtpUseTLS, "" },
- /*
- ** .pp
- ** Availability: SMTP (and SSL)
- **
- ** .pp
- ** Defines wether to use STARTTLS. If this option is set to ``\fIrequired\fP''
- ** and the server does not support STARTTLS or there is an error in the
- ** TLS Handshake, the connection will fail. Setting this to ``\fIenabled\fP''
- ** will try to start TLS and continue without TLS in case of an error.
- **
- **.pp
- ** Madmutt still needs to have SSL support enabled in order to use it.
- */
-#endif
-#if defined(USE_SSL) || defined(USE_GNUTLS)
-#ifdef USE_SSL
- {"ssl_client_cert", DT_PATH, R_NONE, UL &SslClientCert, "" },
- /*
- ** .pp
- ** Availability: SSL
- **
- ** .pp
- ** The file containing a client certificate and its associated private
- ** key.
- */
-#endif /* USE_SSL */
- {"ssl_force_tls", DT_BOOL, R_NONE, OPTSSLFORCETLS, "no" },
- /*
- ** .pp
- ** If this variable is \fIset\fP, Madmutt will require that all connections
- ** to remote servers be encrypted. Furthermore it will attempt to
- ** negotiate TLS even if the server does not advertise the capability,
- ** since it would otherwise have to abort the connection anyway. This
- ** option supersedes ``$$ssl_starttls''.
- */
- {"ssl_starttls", DT_QUAD, R_NONE, OPT_SSLSTARTTLS, "yes" },
- /*
- ** .pp
- ** Availability: SSL or GNUTLS
- **
- ** .pp
- ** If \fIset\fP (the default), Madmutt will attempt to use STARTTLS on servers
- ** advertising the capability. When \fIunset\fP, Madmutt will not attempt to
- ** use STARTTLS regardless of the server's capabilities.
- */
- {"certificate_file", DT_PATH, R_NONE, UL &SslCertFile, "~/.mutt_certificates"},
- /*
- ** .pp
- ** Availability: SSL or GNUTLS
- **
- ** .pp
- ** This variable specifies the file where the certificates you trust
- ** are saved. When an unknown certificate is encountered, you are asked
- ** if you accept it or not. If you accept it, the certificate can also
- ** be saved in this file and further connections are automatically
- ** accepted.
- ** .pp
- ** You can also manually add CA certificates in this file. Any server
- ** certificate that is signed with one of these CA certificates are
- ** also automatically accepted.
- ** .pp
- ** Example: \fTset certificate_file=~/.madmutt/certificates\fP
- */
-# if defined(_MAKEDOC) || !defined (USE_GNUTLS)
- {"ssl_usesystemcerts", DT_BOOL, R_NONE, OPTSSLSYSTEMCERTS, "yes" },
- /*
- ** .pp
- ** Availability: SSL
- **
- ** .pp
- ** If set to \fIyes\fP, Madmutt will use CA certificates in the
- ** system-wide certificate store when checking if server certificate
- ** is signed by a trusted CA.
- */
- {"entropy_file", DT_PATH, R_NONE, UL &SslEntropyFile, "" },
- /*
- ** .pp
- ** Availability: SSL
- **
- ** .pp
- ** The file which includes random data that is used to initialize SSL
- ** library functions.
- */
- {"ssl_use_sslv2", DT_BOOL, R_NONE, OPTSSLV2, "no" },
- /*
- ** .pp
- ** Availability: SSL
- **
- ** .pp
- ** This variables specifies whether to attempt to use SSLv2 in the
- ** SSL authentication process.
- */
-# endif /* _MAKEDOC || !USE_GNUTLS */
- {"ssl_use_sslv3", DT_BOOL, R_NONE, OPTSSLV3, "yes" },
- /*
- ** .pp
- ** Availability: SSL or GNUTLS
- **
- ** .pp
- ** This variables specifies whether to attempt to use SSLv3 in the
- ** SSL authentication process.
- */
- {"ssl_use_tlsv1", DT_BOOL, R_NONE, OPTTLSV1, "yes" },
- /*
- ** .pp
- ** Availability: SSL or GNUTLS
- **
- ** .pp
- ** This variables specifies whether to attempt to use TLSv1 in the
- ** SSL authentication process.
- */
-# ifdef USE_GNUTLS
- {"ssl_min_dh_prime_bits", DT_NUM, R_NONE, UL &SslDHPrimeBits, "0" },
- /*
- ** .pp
- ** Availability: GNUTLS
- **
- ** .pp
- ** This variable specifies the minimum acceptable prime size (in bits)
- ** for use in any Diffie-Hellman key exchange. A value of 0 will use
- ** the default from the GNUTLS library.
- */
- {"ssl_ca_certificates_file", DT_PATH, R_NONE, UL &SslCACertFile, "" },
- /*
- ** .pp
- ** This variable specifies a file containing trusted CA certificates.
- ** Any server certificate that is signed with one of these CA
- ** certificates are also automatically accepted.
- ** .pp
- ** Example: \fTset ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt\fP
- */
-# endif /* USE_GNUTLS */
-# endif /* USE_SSL || USE_GNUTLS */
- {"pipe_split", DT_BOOL, R_NONE, OPTPIPESPLIT, "no" },
+ {"pipe_split", DT_BOOL, OPTPIPESPLIT, "no" },
/*
** .pp
** Used in connection with the \fIpipe-message\fP command and the ``tag-
** In both cases the messages are piped in the current sorted order,
** and the ``$$pipe_sep'' separator is added after each message.
*/
- {"pipe_decode", DT_BOOL, R_NONE, OPTPIPEDECODE, "no" },
+ {"pipe_decode", DT_BOOL, OPTPIPEDECODE, "no" },
/*
** .pp
** Used in connection with the \fIpipe-message\fP command. When \fIunset\fP,
** will weed headers and will attempt to PGP/MIME decode the messages
** first.
*/
- {"pipe_sep", DT_STR, R_NONE, UL &PipeSep, "\n"},
+ {"pipe_sep", DT_STR, UL &PipeSep, "\n"},
/*
** .pp
** The separator to add between messages when piping a list of tagged
** messages to an external Unix command.
*/
- {"pop_authenticators", DT_STR, R_NONE, UL &PopAuthenticators, "" },
+ {"pop_authenticators", DT_STR, UL &PopAuthenticators, "" },
/*
** .pp
** This is a colon-delimited list of authentication methods Madmutt may
** .pp
** Example: \fTset pop_authenticators="digest-md5:apop:user"\fP
*/
- {"pop_auth_try_all", DT_BOOL, R_NONE, OPTPOPAUTHTRYALL, "yes" },
- /*
- ** .pp
- ** If \fIset\fP, Madmutt will try all available methods. When \fIunset\fP, Madmutt will
- ** only fall back to other authentication methods if the previous
- ** methods are unavailable. If a method is available but authentication
- ** fails, Madmutt will not connect to the POP server.
- */
- {"pop_checkinterval", DT_SYN, R_NONE, UL "pop_mail_check", 0},
- {"pop_mail_check", DT_NUM, R_NONE, UL &PopCheckTimeout, "60" },
+ {"pop_mail_check", DT_NUM, UL &PopCheckTimeout, "60" },
/*
** .pp
** This variable configures how often (in seconds) Madmutt should look for
** new mail.
*/
- {"pop_delete", DT_QUAD, R_NONE, OPT_POPDELETE, "ask-no" },
+ {"pop_delete", DT_QUAD, OPT_POPDELETE, "ask-no" },
/*
** .pp
** If \fIset\fP, Madmutt will delete successfully downloaded messages from the POP
** server when using the ``fetch-mail'' function. When \fIunset\fP, Madmutt will
** download messages but also leave them on the POP server.
*/
- {"pop_host", DT_STR, R_NONE, UL &PopHost, ""},
+ {"pop_host", DT_STR, UL &PopHost, ""},
/*
** .pp
** The name of your POP server for the ``fetch-mail'' function. You
** presents a security risk since the superuser of your machine may read it
** regardless of the file's permissions.
*/
- {"pop_last", DT_BOOL, R_NONE, OPTPOPLAST, "no" },
+ {"pop_last", DT_BOOL, OPTPOPLAST, "no" },
/*
** .pp
** If this variable is \fIset\fP, Madmutt will try to use the ``\fTLAST\fP'' POP command
** for retrieving only unread messages from the POP server when using
** the ``fetch-mail'' function.
*/
- {"pop_reconnect", DT_QUAD, R_NONE, OPT_POPRECONNECT, "ask-yes" },
+ {"pop_reconnect", DT_QUAD, OPT_POPRECONNECT, "ask-yes" },
/*
** .pp
** Controls whether or not Madmutt will try to reconnect to a POP server if the
** connection is lost.
*/
- {"pop_user", DT_STR, R_NONE, UL &PopUser, "" },
+ {"pop_user", DT_STR, UL &PopUser, "" },
/*
** .pp
** Your login name on the POP server.
** .pp
** This variable defaults to your user name on the local machine.
*/
- {"pop_pass", DT_STR, R_NONE, UL &PopPass, ""},
+ {"pop_pass", DT_STR, UL &PopPass, ""},
/*
** .pp
** Specifies the password for your POP account. If \fIunset\fP, Madmutt will
** presents a security risk since the superuser of your machine may read it
** regardless of the file's permissions.
*/
- {"post_indent_string", DT_STR, R_NONE, UL &PostIndentString, ""},
- /*
- ** .pp
- ** Similar to the ``$$attribution'' variable, Madmutt will append this
- ** string after the inclusion of a message which is being replied to.
- */
-#ifdef USE_NNTP
- {"nntp_post_moderated", DT_QUAD, R_NONE, OPT_TOMODERATED, "ask-yes" },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** If set to \fIyes\fP, Madmutt will post articles to newsgroup that have
- ** not permissions to post (e.g. moderated).
- ** .pp
- ** \fBNote:\fP if the newsserver
- ** does not support posting to that newsgroup or a group is totally read-only, that
- ** posting will not have any effect.
- */
-#endif
- {"postpone", DT_QUAD, R_NONE, OPT_POSTPONE, "ask-yes" },
+ {"postpone", DT_QUAD, OPT_POSTPONE, "ask-yes" },
/*
** .pp
** Controls whether or not messages are saved in the ``$$postponed''
** mailbox when you elect not to send immediately.
*/
- {"postponed", DT_PATH, R_NONE, UL &Postponed, "~/postponed"},
+ {"postponed", DT_PATH, UL &Postponed, "~/postponed"},
/*
** .pp
** Madmutt allows you to indefinitely ``$postpone sending a message'' which
** in the mailbox specified by this variable. Also see the ``$$postpone''
** variable.
*/
- {"preconnect", DT_STR, R_NONE, UL &Preconnect, "" },
+ {"preconnect", DT_STR, UL &Preconnect, "" },
/*
** .pp
** If \fIset\fP, a shell command to be executed if Madmutt fails to establish
** \fBNote:\fP For this example to work, you must be able to log in to the
** remote machine without having to enter a password.
*/
- {"print", DT_QUAD, R_NONE, OPT_PRINT, "ask-no" },
+ {"print", DT_QUAD, OPT_PRINT, "ask-no" },
/*
** .pp
** Controls whether or not Madmutt really prints messages.
** This is set to \fIask-no\fP by default, because some people
** accidentally hit ``p'' often.
*/
- {"print_command", DT_PATH, R_NONE, UL &PrintCmd, "lpr"},
+ {"print_command", DT_PATH, UL &PrintCmd, "lpr"},
/*
** .pp
** This specifies the command pipe that should be used to print messages.
*/
- {"print_decode", DT_BOOL, R_NONE, OPTPRINTDECODE, "yes" },
+ {"print_decode", DT_BOOL, OPTPRINTDECODE, "yes" },
/*
** .pp
** Used in connection with the print-message command. If this
** some advanced printer filter which is able to properly format
** e-mail messages for printing.
*/
- {"print_split", DT_BOOL, R_NONE, OPTPRINTSPLIT, "no" },
+ {"print_split", DT_BOOL, OPTPRINTSPLIT, "no" },
/*
** .pp
** Used in connection with the print-message command. If this option
** Those who use the \fTenscript(1)\fP program's mail-printing mode will
** most likely want to set this option.
*/
- {"prompt_after", DT_BOOL, R_NONE, OPTPROMPTAFTER, "yes" },
+ {"prompt_after", DT_BOOL, OPTPROMPTAFTER, "yes" },
/*
** .pp
** If you use an \fIexternal\fP ``$$pager'', setting this variable will
** than returning to the index menu. If \fIunset\fP, Madmutt will return to the
** index menu when the external pager exits.
*/
- {"query_command", DT_PATH, R_NONE, UL &QueryCmd, ""},
+ {"query_command", DT_PATH, UL &QueryCmd, ""},
/*
** .pp
** This specifies the command that Madmutt will use to make external address
** with the query string the user types. See ``$query'' for more
** information.
*/
- {"quote_empty", DT_BOOL, R_NONE, OPTQUOTEEMPTY, "yes" },
+ {"quote_empty", DT_BOOL, OPTQUOTEEMPTY, "yes" },
/*
** .pp
** Controls whether or not empty lines will be quoted using
** ``$indent_string''.
*/
- {"quote_quoted", DT_BOOL, R_NONE, OPTQUOTEQUOTED, "no" },
+ {"quote_quoted", DT_BOOL, OPTQUOTEQUOTED, "no" },
/*
** .pp
** Controls how quoted lines will be quoted. If \fIset\fP, one quote
** character will be added to the end of existing prefix. Otherwise,
** quoted lines will be prepended by ``$indent_string''.
*/
- {"quote_regexp", DT_RX, R_PAGER, UL &QuoteRegexp, "^([ \t]*[|>:}#])+"},
+ {"quote_regexp", DT_RX, UL &QuoteRegexp, "^([ \t]*[|>:}#])+"},
/*
** .pp
** A regular expression used in the internal-pager to determine quoted
** matches \fIexactly\fP the quote characters at the beginning of quoted
** lines.
*/
- {"read_inc", DT_NUM, R_NONE, UL &ReadInc, "10" },
+ {"read_inc", DT_NUM, UL &ReadInc, "10" },
/*
** .pp
** If set to a value greater than 0, Madmutt will display which message it
** .pp
** Also see the ``$$write_inc'' variable.
*/
- {"read_only", DT_BOOL, R_NONE, OPTREADONLY, "no" },
- /*
- ** .pp
- ** If set, all folders are opened in read-only mode.
- */
- {"realname", DT_STR, R_BOTH, UL &Realname, "" },
+ {"realname", DT_STR, UL &Realname, "" },
/*
** .pp
** This variable specifies what ``real'' or ``personal'' name should be used
** variable will \fInot\fP be used when the user has set a real name
** in the $$from variable.
*/
- {"recall", DT_QUAD, R_NONE, OPT_RECALL, "ask-yes" },
+ {"recall", DT_QUAD, OPT_RECALL, "ask-yes" },
/*
** .pp
** Controls whether or not Madmutt recalls postponed messages
** Setting this variable to \fIyes\fP is not generally useful, and thus not
** recommended.
*/
- {"record", DT_PATH, R_NONE, UL &Outbox, ""},
- /*
- ** .pp
- ** This specifies the file into which your outgoing messages should be
- ** appended. (This is meant as the primary method for saving a copy of
- ** your messages, but another way to do this is using the ``$my_hdr''
- ** command to create a \fTBcc:\fP header field with your email address in it.)
- ** .pp
- ** The value of \fI$$record\fP is overridden by the ``$$force_name'' and
- ** ``$$save_name'' variables, and the ``$fcc-hook'' command.
- */
- {"reply_regexp", DT_RX, R_INDEX|R_RESORT, UL &ReplyRegexp, "^(re([\\[0-9\\]+])*|aw):[ \t]*"},
+ {"reply_regexp", DT_RX, UL &ReplyRegexp, "^(re([\\[0-9\\]+])*|aw):[ \t]*"},
/*
** .pp
** A regular expression used to recognize reply messages when threading
** and replying. The default value corresponds to the English ``Re:'' and
** the German ``Aw:''.
*/
- {"reply_self", DT_BOOL, R_NONE, OPTREPLYSELF, "no" },
- /*
- ** .pp
- ** If \fIunset\fP and you are replying to a message sent by you, Madmutt will
- ** assume that you want to reply to the recipients of that message rather
- ** than to yourself.
- */
- {"reply_to", DT_QUAD, R_NONE, OPT_REPLYTO, "ask-yes" },
+ {"reply_to", DT_QUAD, OPT_REPLYTO, "ask-yes" },
/*
** .pp
** If \fIset\fP, when replying to a message, Madmutt will use the address listed
** header field to the list address and you want to send a private
** message to the author of a message.
*/
- {"resolve", DT_BOOL, R_NONE, OPTRESOLVE, "yes" },
+ {"resolve", DT_BOOL, OPTRESOLVE, "yes" },
/*
** .pp
** When set, the cursor will be automatically advanced to the next
** (possibly undeleted) message whenever a command that modifies the
** current message is executed.
*/
- {"reverse_alias", DT_BOOL, R_BOTH, OPTREVALIAS, "no" },
+ {"reverse_alias", DT_BOOL, OPTREVALIAS, "no" },
/*
** .pp
** This variable controls whether or not Madmutt will display the ``personal''
** ``abd30425@somewhere.net.'' This is useful when the person's e-mail
** address is not human friendly (like CompuServe addresses).
*/
- {"reverse_name", DT_BOOL, R_BOTH, OPTREVNAME, "no" },
+ {"reverse_name", DT_BOOL, OPTREVNAME, "no" },
/*
** .pp
** It may sometimes arrive that you receive mail to a certain machine,
** used doesn't match your alternates, the \fTFrom:\fP line will use
** your address on the current machine.
*/
- {"reverse_realname", DT_BOOL, R_BOTH, OPTREVREAL, "yes" },
+ {"reverse_realname", DT_BOOL, OPTREVREAL, "yes" },
/*
** .pp
** This variable fine-tunes the behaviour of the $reverse_name feature.
** possibly including eventual real names. When it is \fIunset\fP, Madmutt will
** override any such real names with the setting of the $realname variable.
*/
- {"save_address", DT_BOOL, R_NONE, OPTSAVEADDRESS, "no" },
- /*
- ** .pp
- ** If \fIset\fP, Madmutt will take the sender's full address when choosing a
- ** default folder for saving a mail. If ``$$save_name'' or ``$$force_name''
- ** is \fIset\fP too, the selection of the fcc folder will be changed as well.
- */
- {"save_empty", DT_BOOL, R_NONE, OPTSAVEEMPTY, "yes" },
- /*
- ** .pp
- ** When \fIunset\fP, mailboxes which contain no saved messages will be removed
- ** when closed (the exception is ``$$spoolfile'' which is never removed).
- ** If \fIset\fP, mailboxes are never removed.
- ** .pp
- ** \fBNote:\fP This only applies to mbox and MMDF folders, Madmutt does not
- ** delete MH and Maildir directories.
- */
- {"save_name", DT_BOOL, R_NONE, OPTSAVENAME, "no" },
- /*
- ** .pp
- ** This variable controls how copies of outgoing messages are saved.
- ** When set, a check is made to see if a mailbox specified by the
- ** recipient address exists (this is done by searching for a mailbox in
- ** the ``$$folder'' directory with the \fIusername\fP part of the
- ** recipient address). If the mailbox exists, the outgoing message will
- ** be saved to that mailbox, otherwise the message is saved to the
- ** ``$$record'' mailbox.
- ** .pp
- ** Also see the ``$$force_name'' variable.
- */
- {"score", DT_BOOL, R_NONE, OPTSCORE, "yes" },
- /*
- ** .pp
- ** When this variable is \fIunset\fP, scoring is turned off. This can
- ** be useful to selectively disable scoring for certain folders when the
- ** ``$$score_threshold_delete'' variable and friends are used.
- **
- */
- {"score_threshold_delete", DT_NUM, R_NONE, UL &ScoreThresholdDelete, "-1" },
- /*
- ** .pp
- ** Messages which have been assigned a score equal to or lower than the value
- ** of this variable are automatically marked for deletion by Madmutt. Since
- ** Madmutt scores are always greater than or equal to zero, the default setting
- ** of this variable will never mark a message for deletion.
- */
- {"score_threshold_flag", DT_NUM, R_NONE, UL &ScoreThresholdFlag, "9999" },
- /*
- ** .pp
- ** Messages which have been assigned a score greater than or equal to this
- ** variable's value are automatically marked ``flagged''.
- */
- {"score_threshold_read", DT_NUM, R_NONE, UL &ScoreThresholdRead, "-1" },
- /*
- ** .pp
- ** Messages which have been assigned a score equal to or lower than the value
- ** of this variable are automatically marked as read by Madmutt. Since
- ** Madmutt scores are always greater than or equal to zero, the default setting
- ** of this variable will never mark a message read.
- */
- {"send_charset", DT_STR, R_NONE, UL &SendCharset, "us-ascii:iso-8859-1:utf-8"},
- /*
- ** .pp
- ** A list of character sets for outgoing messages. Madmutt will use the
- ** first character set into which the text can be converted exactly.
- ** If your ``$$charset'' is not \fTiso-8859-1\fP and recipients may not
- ** understand \fTUTF-8\fP, it is advisable to include in the list an
- ** appropriate widely used standard character set (such as
- ** \fTiso-8859-2\fP, \fTkoi8-r\fP or \fTiso-2022-jp\fP) either
- ** instead of or after \fTiso-8859-1\fP.
- */
-#ifdef USE_NNTP
- {"nntp_save_unsubscribed", DT_BOOL, R_NONE, OPTSAVEUNSUB, "no" },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** When \fIset\fP, info about unsubscribed newsgroups will be saved into the
- ** ``newsrc'' file and into the news cache.
- */
-#endif
-#ifdef USE_NNTP
- {"nntp_show_new_news", DT_BOOL, R_NONE, OPTSHOWNEWNEWS, "yes" },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** If \fIset\fP, the newsserver will be asked for new newsgroups on entering
- ** the browser. Otherwise, it will be done only once for a newsserver.
- ** Also controls whether or not the number of new articles of subscribed
- ** newsgroups will be checked.
- */
- {"nntp_show_only_unread", DT_BOOL, R_NONE, OPTSHOWONLYUNREAD, "no" },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** If \fIset\fP, only subscribed newsgroups that contain unread articles
- ** will be displayed in the newsgroup browser.
- */
-#endif
- {"sig_dashes", DT_BOOL, R_NONE, OPTSIGDASHES, "yes" },
+ {"sig_dashes", DT_BOOL, OPTSIGDASHES, "yes" },
/*
** .pp
** If set, a line containing ``\fT-- \fP'' (dash, dash, space)
** For example, Madmutt has the ability to highlight
** the signature in a different color in the builtin pager.
*/
- {"sig_on_top", DT_BOOL, R_NONE, OPTSIGONTOP, "no" },
- /*
- ** .pp
- ** If \fIset\fP, the signature will be included before any quoted or forwarded
- ** text. It is \fBstrongly\fP recommended that you do not set this variable
- ** unless you really know what you are doing, and are prepared to take
- ** some heat from netiquette guardians.
- */
- {"signature", DT_PATH, R_NONE, UL &Signature, "~/.signature"},
- /*
- ** .pp
- ** Specifies the filename of your signature, which is appended to all
- ** outgoing messages. If the filename ends with a pipe (``\fT|\fP''), it is
- ** assumed that filename is a shell command and input should be read from
- ** its stdout.
- */
- {"signoff_string", DT_STR, R_NONE, UL &SignOffString, "" },
+ {"signoff_string", DT_STR, UL &SignOffString, "" },
/*
** .pp
** If \fIset\fP, this string will be inserted before the signature. This is useful
** witty quotes into your mails, better use a signature file instead of
** the signoff string.
*/
- {"simple_search", DT_STR, R_NONE, UL &SimpleSearch, "~f %s | ~s %s"},
+ {"simple_search", DT_STR, UL &SimpleSearch, "~f %s | ~s %s"},
/*
** .pp
** Specifies how Madmutt should expand a simple search into a real search
** .pp
** \fT~f joe | ~s joe\fP
*/
- {"smart_wrap", DT_BOOL, R_PAGER, OPTWRAP, "yes" },
+ {"smart_wrap", DT_BOOL, OPTWRAP, "yes" },
/*
** .pp
** Controls the display of lines longer than the screen width in the
** If \fIunset\fP, lines are simply wrapped at the screen edge. Also see the
** ``$$markers'' variable.
*/
- {"smileys", DT_RX, R_PAGER, UL &Smileys, "(>From )|(:[-^]?[][)(><}{|/DP])"},
+ {"smileys", DT_RX, UL &Smileys, "(>From )|(:[-^]?[][)(><}{|/DP])"},
/*
** .pp
** The \fIpager\fP uses this variable to catch some common false
** positives of ``$$quote_regexp'', most notably smileys in the beginning
** of a line
*/
- {"sleep_time", DT_NUM, R_NONE, UL &SleepTime, "1" },
+ {"sleep_time", DT_NUM, UL &SleepTime, "1" },
/*
** .pp
** Specifies time, in seconds, to pause while displaying certain informational
** messages from the current folder. The default is to pause one second, so
** a value of zero for this option suppresses the pause.
*/
- {"sort", DT_SORT, R_INDEX|R_RESORT, UL &Sort, "date" },
+ {"sort", DT_SORT, UL &Sort, "date" },
/*
** .pp
** Specifies how to sort messages in the \fIindex\fP menu. Valid values
** You may optionally use the ``reverse-'' prefix to specify reverse sorting
** order (example: \fTset sort=reverse-date-sent\fP).
*/
- {"sort_alias", DT_SORT|DT_SORT_ALIAS, R_NONE, UL &SortAlias, "alias" },
+ {"sort_alias", DT_SORT|DT_SORT_ALIAS, UL &SortAlias, "alias" },
/*
** .pp
** Specifies how the entries in the ``alias'' menu are sorted. The
** . unsorted (leave in order specified in .muttrc)
** .te
*/
- {"sort_aux", DT_SORT|DT_SORT_AUX, R_INDEX|R_RESORT_BOTH, UL &SortAux, "date" },
+ {"sort_aux", DT_SORT|DT_SORT_AUX, UL &SortAux, "date" },
/*
** .pp
** When sorting by threads, this variable controls how threads are sorted
** (which is not the right thing to do, but kept to not break any existing
** configuration setting).
*/
- {"sort_browser", DT_SORT|DT_SORT_BROWSER, R_NONE, UL &BrowserSort, "alpha" },
+ {"sort_browser", DT_SORT|DT_SORT_BROWSER, UL &BrowserSort, "alpha" },
/*
** .pp
** Specifies how to sort entries in the file browser. By default, the
** You may optionally use the ``reverse-'' prefix to specify reverse sorting
** order (example: \fTset sort_browser=reverse-date\fP).
*/
- {"sort_re", DT_BOOL, R_INDEX|R_RESORT|R_RESORT_INIT, OPTSORTRE, "yes" },
+ {"sort_re", DT_BOOL, OPTSORTRE, "yes" },
/*
** .pp
** This variable is only useful when sorting by threads with
** Madmutt will attach the message whether or not this is the case,
** as long as the non-``$$reply_regexp'' parts of both messages are identical.
*/
- {"spam_separator", DT_STR, R_NONE, UL &SpamSep, ","},
- /*
- ** .pp
- ** ``$spam_separator'' controls what happens when multiple spam headers
- ** are matched: if \fIunset\fP, each successive header will overwrite any
- ** previous matches value for the spam label. If \fIset\fP, each successive
- ** match will append to the previous, using ``$spam_separator'' as a
- ** separator.
- */
- {"spoolfile", DT_PATH, R_NONE, UL &Spoolfile, "" },
+ {"spoolfile", DT_PATH, UL &Spoolfile, "" },
/*
** .pp
** If your spool mailbox is in a non-default place where Madmutt cannot find
** automatically set this variable to the value of the environment
** variable $$$MAIL if it is not set.
*/
- {"status_chars", DT_STR, R_BOTH, UL &StChars, "-*%A"},
+ {"status_chars", DT_STR, UL &StChars, "-*%A"},
/*
** .pp
** Controls the characters used by the ``\fT%r\fP'' indicator in
** opened in attach-message mode (Certain operations like composing
** a new mail, replying, forwarding, etc. are not permitted in this mode).
*/
- {"status_format", DT_STR, R_BOTH, UL &Status, "-%r-Madmutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---"},
+ {"status_format", DT_STR, UL &Status, "-%r-Madmutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---"},
/*
** .pp
** Controls the format of the status line displayed in the \fIindex\fP
** will replace any dots in the expansion by underscores. This might be helpful
** with IMAP folders that don't like dots in folder names.
*/
- {"status_on_top", DT_BOOL, R_BOTH, OPTSTATUSONTOP, "no" },
- /*
- ** .pp
- ** Setting this variable causes the ``status bar'' to be displayed on
- ** the first line of the screen rather than near the bottom.
- */
- {"strict_mailto", DT_BOOL, R_NONE, OPTSTRICTMAILTO, "yes" },
+ {"strict_mailto", DT_BOOL, OPTSTRICTMAILTO, "yes" },
/*
**
** .pp
** ``X-Mailto-'' and the message including headers will be shown in the editor
** regardless of what ``$$edit_headers'' is set to.
**/
- {"strict_threads", DT_BOOL, R_RESORT|R_RESORT_INIT|R_INDEX, OPTSTRICTTHREADS, "no" },
+ {"strict_threads", DT_BOOL, OPTSTRICTTHREADS, "no" },
/*
** .pp
** If \fIset\fP, threading will only make use of the ``\fTIn-Reply-To:\fP'' and
** ``$$sort_re'' for a less drastic way of controlling this
** behaviour.
*/
- {"strip_was", DT_BOOL, R_NONE, OPTSTRIPWAS, "no" },
+ {"strip_was", DT_BOOL, OPTSTRIPWAS, "no" },
/**
** .pp
** When \fIset\fP, Madmutt will remove the trailing part of the ``\fTSubject:\fP''
** line which matches $$strip_was_regex when replying. This is useful to
** properly react on subject changes and reduce ``subject noise.'' (esp. in Usenet)
**/
- {"strip_was_regex", DT_RX, R_NONE, UL &StripWasRegexp, "\\([Ww][Aa][RrSs]: .*\\)[ ]*$"},
+ {"strip_was_regex", DT_RX, UL &StripWasRegexp, "\\([Ww][Aa][RrSs]: .*\\)[ ]*$"},
/**
** .pp
** When non-empty and $$strip_was is \fIset\fP, Madmutt will remove this
** trailing part of the ``Subject'' line when replying if it won't be empty
** afterwards.
**/
- {"stuff_quoted", DT_BOOL, R_BOTH, OPTSTUFFQUOTED, "no" },
+ {"stuff_quoted", DT_BOOL, OPTSTUFFQUOTED, "no" },
/*
** .pp
** If \fIset\fP, attachments with flowed format will have their quoting ``stuffed'',
** i.e. a space will be inserted between the quote characters and the actual
** text.
*/
- {"suspend", DT_BOOL, R_NONE, OPTSUSPEND, "yes" },
- /*
- ** .pp
- ** When \fIunset\fP, Madmutt won't stop when the user presses the terminal's
- ** \fIsusp\fP key, usually \fTCTRL+Z\fP. This is useful if you run Madmutt
- ** inside an xterm using a command like ``\fTxterm -e madmutt\fP.''
- */
- {"text_flowed", DT_BOOL, R_NONE, OPTTEXTFLOWED, "no" },
+ {"text_flowed", DT_BOOL, OPTTEXTFLOWED, "no" },
/*
** .pp
** When \fIset\fP, Madmutt will generate \fTtext/plain; format=flowed\fP attachments.
** .pp
** Note that $$indent_string is ignored when this option is set.
*/
- {"thread_received", DT_BOOL, R_RESORT|R_RESORT_INIT|R_INDEX, OPTTHREADRECEIVED, "no" },
+ {"thread_received", DT_BOOL, OPTTHREADRECEIVED, "no" },
/*
** .pp
** When \fIset\fP, Madmutt uses the date received rather than the date sent
** to thread messages by subject.
*/
- {"thorough_search", DT_BOOL, R_NONE, OPTTHOROUGHSRC, "no" },
+ {"thorough_search", DT_BOOL, OPTTHOROUGHSRC, "no" },
/*
** .pp
** Affects the \fT~b\fP and \fT~h\fP search operations described in
** messages to be searched are decoded before searching. If \fIunset\fP,
** messages are searched as they appear in the folder.
*/
- {"tilde", DT_BOOL, R_PAGER, OPTTILDE, "no" },
+ {"tilde", DT_BOOL, OPTTILDE, "no" },
/*
** .pp
** When \fIset\fP, the internal-pager will pad blank lines to the bottom of the
** screen with a tilde (~).
*/
- {"timeout", DT_NUM, R_NONE, UL &Timeout, "600" },
+ {"timeout", DT_NUM, UL &Timeout, "600" },
/*
** .pp
** This variable controls the \fInumber of seconds\fP Madmutt will wait
** checking for new mail. A value of zero or less will cause Madmutt
** to never time out.
*/
- {"to_chars", DT_STR, R_BOTH, UL &Tochars, " +TCFL"},
+ {"to_chars", DT_STR, UL &Tochars, " +TCFL"},
/*
** .pp
** Controls the character used to indicate mail addressed to you. The
** by \fIyou\fP. The sixth character is used to indicate when a mail
** was sent to a mailing-list you're subscribe to (default: L).
*/
- {"trash", DT_PATH, R_NONE, UL &TrashPath, "" },
+ {"trash", DT_PATH, UL &TrashPath, "" },
/*
** .pp
** If \fIset\fP, this variable specifies the path of the trash folder where the
** \fBNote\fP: When you delete a message in the trash folder, it is really
** deleted, so that there is no way to recover mail.
*/
- {"tunnel", DT_STR, R_NONE, UL &Tunnel, "" },
+ {"tunnel", DT_STR, UL &Tunnel, "" },
/*
** .pp
** Setting this variable will cause Madmutt to open a pipe to a command
** \fBNote:\fP For this example to work you must be able to log in to the remote
** machine without having to enter a password.
*/
- {"umask", DT_NUM, R_NONE, UL &Umask, "0077" },
+ {"umask", DT_NUM, UL &Umask, "0077" },
/*
** .pp
** This sets the umask that will be used by Madmutt when creating all
** kinds of files. If \fIunset\fP, the default value is \fT077\fP.
*/
- {"use_from", DT_BOOL, R_NONE, OPTUSEFROM, "yes" },
+ {"use_from", DT_BOOL, OPTUSEFROM, "yes" },
/*
** .pp
** When \fIset\fP, Madmutt will generate the ``\fTFrom:\fP'' header field when
** command.
*/
#ifdef HAVE_LIBIDN
- {"use_idn", DT_BOOL, R_BOTH, OPTUSEIDN, "yes" },
+ {"use_idn", DT_BOOL, OPTUSEIDN, "yes" },
/*
** .pp
** Availability: IDN
** This variable only affects decoding.
*/
#endif /* HAVE_LIBIDN */
-#ifdef HAVE_GETADDRINFO
- {"use_ipv6", DT_BOOL, R_NONE, OPTUSEIPV6, "yes" },
- /*
- ** .pp
- ** When \fIset\fP, Madmutt will look for IPv6 addresses of hosts it tries to
- ** contact. If this option is \fIunset\fP, Madmutt will restrict itself to IPv4 addresses.
- ** Normally, the default should work.
- */
-#endif /* HAVE_GETADDRINFO */
- {"user_agent", DT_SYN, R_NONE, UL "agent_string", 0 },
- {"agent_string", DT_BOOL, R_NONE, OPTXMAILER, "yes" },
+ {"agent_string", DT_BOOL, OPTXMAILER, "yes" },
/*
** .pp
** When \fIset\fP, Madmutt will add a ``\fTUser-Agent:\fP'' header to outgoing
** messages, indicating which version of Madmutt was used for composing
** them.
*/
- {"wait_key", DT_BOOL, R_NONE, OPTWAITKEY, "yes" },
+ {"wait_key", DT_BOOL, OPTWAITKEY, "yes" },
/*
** .pp
** Controls whether Madmutt will ask you to press a key after \fIshell-
** When \fIset\fP, Madmutt will always ask for a key. When \fIunset\fP, Madmutt will wait
** for a key only if the external command returned a non-zero status.
*/
- {"weed", DT_BOOL, R_NONE, OPTWEED, "yes" },
+ {"weed", DT_BOOL, OPTWEED, "yes" },
/*
** .pp
** When \fIset\fP, Madmutt will weed headers when displaying, forwarding,
** printing, or replying to messages.
*/
- {"wrap_search", DT_BOOL, R_NONE, OPTWRAPSEARCH, "yes" },
+ {"wrap_search", DT_BOOL, OPTWRAPSEARCH, "yes" },
/*
** .pp
** Controls whether searches wrap around the end of the mailbox.
** When \fIset\fP, searches will wrap around the first (or last) message. When
** \fIunset\fP, searches will not wrap.
*/
- {"wrapmargin", DT_NUM, R_PAGER, UL &WrapMargin, "0" },
+ {"wrapmargin", DT_NUM, UL &WrapMargin, "0" },
/*
** .pp
** Controls the size of the margin remaining at the right side of
** the terminal when Madmutt's pager does smart wrapping.
*/
- {"write_inc", DT_NUM, R_NONE, UL &WriteInc, "10" },
+ {"write_inc", DT_NUM, UL &WriteInc, "10" },
/*
** .pp
** When writing a mailbox, a message will be printed every
** .pp
** Also see the ``$$read_inc'' variable.
*/
- {"write_bcc", DT_BOOL, R_NONE, OPTWRITEBCC, "yes" },
+ {"write_bcc", DT_BOOL, OPTWRITEBCC, "yes" },
/*
** .pp
** Controls whether Madmutt writes out the Bcc header when preparing
** messages to be sent. Exim users may wish to \fIunset\fP this.
*/
- {"xterm_icon", DT_STR, R_BOTH, UL &XtermIcon, "M%?n?AIL&ail?"},
+ {"xterm_icon", DT_STR, UL &XtermIcon, "M%?n?AIL&ail?"},
/*
** .pp
** Controls the format of the X11 icon title, as long as $$xterm_set_titles
** is \fIset\fP. This string is identical in formatting to the one used by
** ``$$status_format''.
*/
- {"xterm_set_titles", DT_BOOL, R_BOTH, OPTXTERMSETTITLES, "no" },
+ {"xterm_set_titles", DT_BOOL, OPTXTERMSETTITLES, "no" },
/*
** .pp
** Controls whether Madmutt sets the xterm title bar and icon name
** (as long as you're in an appropriate terminal). The default must
** be \fIunset\fP to force in the validity checking.
*/
- {"xterm_leave", DT_STR, R_BOTH, UL &XtermLeave, "" },
+ {"xterm_leave", DT_STR, UL &XtermLeave, "" },
/*
** .pp
** If $$xterm_set_titles is \fIset\fP, this string will be used to
** .pp
** \fTset xterm_leave = "`test x$$$DISPLAY != x && xprop -id $$$WINDOWID | grep WM_NAME | cut -d '"' -f 2`"\fP
*/
- {"xterm_title", DT_STR, R_BOTH, UL &XtermTitle, "Madmutt with %?m?%m messages&no messages?%?n? [%n New]?"},
+ {"xterm_title", DT_STR, UL &XtermTitle, "Madmutt with %?m?%m messages&no messages?%?n? [%n New]?"},
/*
** .pp
** Controls the format of the title bar of the xterm provided that
** $$xterm_set_titles has been \fIset\fP. This string is identical in formatting
** to the one used by ``$$status_format''.
*/
-#ifdef USE_NNTP
- {"nntp_x_comment_to", DT_BOOL, R_NONE, OPTXCOMMENTTO, "no" },
- /*
- ** .pp
- ** Availability: NNTP
- **
- ** .pp
- ** If \fIset\fP, Madmutt will add a ``\fTX-Comment-To:\fP'' header field
- ** (that contains full name of the original article author) to articles that
- ** you followup to.
- */
-#endif
/*--*/
- { NULL, -1, R_NONE, -1, NULL }
+ { NULL, -1, -1, NULL }
};
const struct mapping_t SortMethods[] = {
/* functions used to parse commands in a rc file */
-static int parse_list (BUFFER *, BUFFER *, unsigned long, BUFFER *);
-static int parse_spam_list (BUFFER *, BUFFER *, unsigned long, BUFFER *);
-static int parse_unlist (BUFFER *, BUFFER *, unsigned long, BUFFER *);
static int parse_attachments (BUFFER *, BUFFER *, unsigned long, BUFFER *);
static int parse_unattachments (BUFFER *, BUFFER *, unsigned long, BUFFER *);
-static int parse_lists (BUFFER *, BUFFER *, unsigned long, BUFFER *);
-static int parse_unlists (BUFFER *, BUFFER *, unsigned long, BUFFER *);
static int parse_alias (BUFFER *, BUFFER *, unsigned long, BUFFER *);
static int parse_unalias (BUFFER *, BUFFER *, unsigned long, BUFFER *);
-static int parse_ignore (BUFFER *, BUFFER *, unsigned long, BUFFER *);
-static int parse_unignore (BUFFER *, BUFFER *, unsigned long, BUFFER *);
static int parse_source (BUFFER *, BUFFER *, unsigned long, BUFFER *);
static int parse_set (BUFFER *, BUFFER *, unsigned long, BUFFER *);
static int parse_my_hdr (BUFFER *, BUFFER *, unsigned long, BUFFER *);
static int parse_unmy_hdr (BUFFER *, BUFFER *, unsigned long, BUFFER *);
-static int parse_subscribe (BUFFER *, BUFFER *, unsigned long, BUFFER *);
-static int parse_unsubscribe (BUFFER *, BUFFER *, unsigned long, BUFFER *);
-
-static int parse_alternates (BUFFER *, BUFFER *, unsigned long, BUFFER *);
-static int parse_unalternates (BUFFER *, BUFFER *, unsigned long, BUFFER *);
struct command_t {
const char *name;
};
struct command_t Commands[] = {
- {"mailboxes", buffy_parse_mailboxes, M_MAILBOXES},
- {"unmailboxes", buffy_parse_mailboxes, M_UNMAILBOXES},
{"bind", mutt_parse_bind, 0},
{"color", mutt_parse_color, 0},
{"exec", mutt_parse_exec, 0},
- {"account-hook", mutt_parse_hook, M_ACCOUNTHOOK},
- {"append-hook", mutt_parse_hook, M_APPENDHOOK},
- {"charset-hook", mutt_parse_hook, M_CHARSETHOOK},
- {"close-hook", mutt_parse_hook, M_CLOSEHOOK},
- {"crypt-hook", mutt_parse_hook, M_CRYPTHOOK},
- {"fcc-hook", mutt_parse_hook, M_FCCHOOK},
- {"fcc-save-hook", mutt_parse_hook, M_FCCHOOK|M_SAVEHOOK},
- {"folder-hook", mutt_parse_hook, M_FOLDERHOOK},
-#ifdef HAVE_ICONV
- {"iconv-hook", mutt_parse_hook, M_ICONVHOOK},
-#endif
- {"mbox-hook", mutt_parse_hook, M_MBOXHOOK},
- {"message-hook", mutt_parse_hook, M_MESSAGEHOOK},
- {"open-hook", mutt_parse_hook, M_OPENHOOK},
- {"pgp-hook", mutt_parse_hook, M_CRYPTHOOK},
- {"reply-hook", mutt_parse_hook, M_REPLYHOOK},
- {"save-hook", mutt_parse_hook, M_SAVEHOOK},
- {"send2-hook", mutt_parse_hook, M_SEND2HOOK},
- {"send-hook", mutt_parse_hook, M_SENDHOOK},
{"macro", mutt_parse_macro, 0},
- {"mono", mutt_parse_mono, 0},
{"push", mutt_parse_push, 0},
- {"score", mutt_parse_score, 0},
{"uncolor", mutt_parse_uncolor, 0},
- {"unhook", mutt_parse_unhook, 0},
- {"unmono", mutt_parse_unmono, 0},
- {"unscore", mutt_parse_unscore, 0},
{"alias", parse_alias, 0},
- {"alternates", parse_alternates, 0},
{"attachments", parse_attachments, 0 },
- {"ignore", parse_ignore, 0},
- {"alternative_order", parse_list, UL &AlternativeOrderList},
- {"auto_view", parse_list, UL &AutoViewList},
- {"hdr_order", parse_list, UL &HeaderOrderList},
- {"mime_lookup", parse_list, UL &MimeLookupList},
- {"lists", parse_lists, 0},
{"my_hdr", parse_my_hdr, 0},
{"reset", parse_set, M_SET_RESET},
{"set", parse_set, 0},
{"toggle", parse_set, M_SET_INV},
{"unset", parse_set, M_SET_UNSET},
{"source", parse_source, 0},
- {"nospam", parse_spam_list, M_NOSPAM},
- {"spam", parse_spam_list, M_SPAM},
- {"subscribe", parse_subscribe, 0},
{"unalias", parse_unalias, 0},
- {"unalternates", parse_unalternates, 0},
{"unattachments", parse_unattachments, 0},
- {"unignore", parse_unignore, 0},
- {"unlists", parse_unlists, 0},
- {"unalternative_order", parse_unlist, UL &AlternativeOrderList},
- {"unauto_view", parse_unlist, UL &AutoViewList},
- {"unhdr_order", parse_unlist, UL &HeaderOrderList},
- {"unmime_lookup", parse_unlist, UL &MimeLookupList},
{"unmy_hdr", parse_unmy_hdr, 0},
- {"unsubscribe", parse_unsubscribe, 0},
{NULL, NULL, 0}
};
projects / apps / madmutt.git / blobdiff