#include "mutt_socket.h"
#include "lib/mem.h"
+#include "lib/debug.h"
#ifdef USE_SASL2
#include <errno.h>
{
int err;
- dprint (1, (debugfile, "getnameinfo: "));
switch (ret) {
case EAI_AGAIN:
- dprint (1,
- (debugfile,
- "The name could not be resolved at this time. Future attempts may succeed.\n"));
+ debug_print (1, ("The name could not be resolved at this time. Future attempts may succeed.\n"));
err = SASL_TRYAGAIN;
break;
case EAI_BADFLAGS:
- dprint (1, (debugfile, "The flags had an invalid value.\n"));
+ debug_print (1, ("The flags had an invalid value.\n"));
err = SASL_BADPARAM;
break;
case EAI_FAIL:
- dprint (1, (debugfile, "A non-recoverable error occurred.\n"));
+ debug_print (1, ("A non-recoverable error occurred.\n"));
err = SASL_FAIL;
break;
case EAI_FAMILY:
- dprint (1,
- (debugfile,
- "The address family was not recognized or the address length was invalid for the specified family.\n"));
+ debug_print (1, ("The address family was not recognized or the address length was invalid for the specified family.\n"));
err = SASL_BADPROT;
break;
case EAI_MEMORY:
- dprint (1, (debugfile, "There was a memory allocation failure.\n"));
+ debug_print (1, ("There was a memory allocation failure.\n"));
err = SASL_NOMEM;
break;
case EAI_NONAME:
- dprint (1,
- (debugfile,
- "The name does not resolve for the supplied parameters. NI_NAMEREQD is set and the host's name cannot be located, or both nodename and servname were null.\n"));
+ debug_print (1, ("The name does not resolve for the supplied parameters. NI_NAMEREQD is set and the host's name cannot be located, or both nodename and servname were null.\n"));
err = SASL_FAIL; /* no real equivalent */
break;
case EAI_SYSTEM:
- dprint (1,
- (debugfile,
- "A system error occurred. The error code can be found in errno(%d,%s)).\n",
- errno, strerror (errno)));
+ debug_print (1, ("A system error occurred. The error code can be found in errno(%d,%s)).\n",
+ errno, strerror (errno)));
err = SASL_FAIL; /* no real equivalent */
break;
default:
- dprint (1, (debugfile, "Unknown error %d\n", ret));
+ debug_print (1, ("Unknown error %d\n", ret));
err = SASL_FAIL; /* no real equivalent */
break;
}
rc = sasl_client_init (callbacks);
if (rc != SASL_OK) {
- dprint (1,
- (debugfile, "mutt_sasl_start: libsasl initialisation failed.\n"));
+ debug_print (1, ("libsasl initialisation failed.\n"));
return SASL_FAIL;
}
service = "pop";
break;
default:
- dprint (1, (debugfile, "mutt_sasl_client_new: account type unset\n"));
+ debug_print (1, ("account type unset\n"));
return -1;
}
#ifdef USE_SASL2
size = sizeof (local);
if (getsockname (conn->fd, (struct sockaddr *) &local, &size)) {
- dprint (1,
- (debugfile,
- "mutt_sasl_client_new: getsockname for local failed\n"));
+ debug_print (1, ("getsockname for local failed\n"));
return -1;
}
else
if (iptostring
((struct sockaddr *) &local, size, iplocalport,
IP_PORT_BUFLEN) != SASL_OK) {
- dprint (1,
- (debugfile,
- "mutt_sasl_client_new: iptostring for local failed\n"));
+ debug_print (1, ("iptostring for local failed\n"));
return -1;
}
size = sizeof (remote);
if (getpeername (conn->fd, (struct sockaddr *) &remote, &size)) {
- dprint (1,
- (debugfile,
- "mutt_sasl_client_new: getsockname for remote failed\n"));
+ debug_print (1, ("getsockname for remote failed\n"));
return -1;
}
else
if (iptostring
((struct sockaddr *) &remote, size, ipremoteport,
IP_PORT_BUFLEN) != SASL_OK) {
- dprint (1,
- (debugfile,
- "mutt_sasl_client_new: iptostring for remote failed\n"));
+ debug_print (1, ("iptostring for remote failed\n"));
return -1;
}
- dprint (1,
- (debugfile, "local ip: %s, remote ip:%s\n", iplocalport,
- ipremoteport));
+ debug_print (1, ("local ip: %s, remote ip:%s\n", iplocalport, ipremoteport));
rc =
sasl_client_new (service, conn->account.host, iplocalport, ipremoteport,
#endif
if (rc != SASL_OK) {
- dprint (1, (debugfile,
- "mutt_sasl_client_new: Error allocating SASL connection\n"));
+ debug_print (1, ("Error allocating SASL connection\n"));
return -1;
}
#ifdef SASL_IP_LOCAL
if (sasl_setprop (*saslconn, SASL_IP_LOCAL, &local) != SASL_OK) {
- dprint (1, (debugfile,
- "mutt_sasl_client_new: Error setting local IP address\n"));
+ debug_print (1, ("Error setting local IP address\n"));
return -1;
}
#endif
#ifdef SASL_IP_REMOTE
if (sasl_setprop (*saslconn, SASL_IP_REMOTE, &remote) != SASL_OK) {
- dprint (1, (debugfile,
- "mutt_sasl_client_new: Error setting remote IP address\n"));
+ debug_print (1, ("Error setting remote IP address\n"));
return -1;
}
#endif
secprops.maxbufsize = M_SASL_MAXBUF;
secprops.security_flags |= SASL_SEC_NOPLAINTEXT;
if (sasl_setprop (*saslconn, SASL_SEC_PROPS, &secprops) != SASL_OK) {
- dprint (1, (debugfile,
- "mutt_sasl_client_new: Error setting security properties\n"));
+ debug_print (1, ("Error setting security properties\n"));
return -1;
}
#if (defined(USE_SSL) || defined(USE_GNUTLS) && !defined(USE_NSS))
if (conn->account.flags & M_ACCT_SSL) {
#ifdef USE_SASL2 /* I'm not sure this actually has an effect, at least with SASLv2 */
- dprint (2, (debugfile, "External SSF: %d\n", conn->ssf));
+ debug_print (2, ("External SSF: %d\n", conn->ssf));
if (sasl_setprop (*saslconn, SASL_SSF_EXTERNAL, &(conn->ssf)) != SASL_OK)
#else
memset (&extprops, 0, sizeof (extprops));
extprops.ssf = conn->ssf;
- dprint (2, (debugfile, "External SSF: %d\n", extprops.ssf));
+ debug_print (2, ("External SSF: %d\n", extprops.ssf));
if (sasl_setprop (*saslconn, SASL_SSF_EXTERNAL, &extprops) != SASL_OK)
#endif
{
- dprint (1,
- (debugfile,
- "mutt_sasl_client_new: Error setting external properties\n"));
+ debug_print (1, ("Error setting external properties\n"));
return -1;
}
#ifdef USE_SASL2
- dprint (2,
- (debugfile, "External authentication name: %s\n",
- conn->account.user));
+ debug_print (2, ("External authentication name: %s\n", conn->account.user));
if (sasl_setprop (*saslconn, SASL_AUTH_EXTERNAL, conn->account.user) !=
SASL_OK) {
- dprint (1,
- (debugfile,
- "mutt_sasl_client_new: Error setting external properties\n"));
+ debug_print (1, ("Error setting external properties\n"));
return -1;
}
#endif
char resp[SHORT_STRING];
while (interaction->id != SASL_CB_LIST_END) {
- dprint (2,
- (debugfile,
- "mutt_sasl_interact: filling in SASL interaction %ld.\n",
- interaction->id));
+ debug_print (2, ("filling in SASL interaction %ld.\n", interaction->id));
snprintf (prompt, sizeof (prompt), "%s: ", interaction->prompt);
resp[0] = '\0';
#else
sasl_getprop (saslconn, SASL_SSF, (void **) &sasldata->ssf);
#endif
- dprint (3, (debugfile, "SASL protection strength: %u\n", *sasldata->ssf));
+ debug_print (3, ("SASL protection strength: %u\n", *sasldata->ssf));
/* Add SASL SSF to transport SSF */
conn->ssf += *sasldata->ssf;
#ifdef USE_SASL2
#else
sasl_getprop (saslconn, SASL_MAXOUTBUF, (void **) &sasldata->pbufsize);
#endif
- dprint (3,
- (debugfile, "SASL protection buffer size: %u\n",
- *sasldata->pbufsize));
+ debug_print (3, ("SASL protection buffer size: %u\n", *sasldata->pbufsize));
/* clear input buffer */
sasldata->buf = NULL;
/* mutt_sasl_cb_log: callback to log SASL messages */
static int mutt_sasl_cb_log (void *context, int priority, const char *message)
{
- dprint (priority, (debugfile, "SASL: %s\n", message));
+ debug_print (priority, ("SASL: %s\n", message));
return SASL_OK;
}
if (!account)
return SASL_BADPARAM;
- dprint (2, (debugfile, "mutt_sasl_cb_authname: getting %s for %s:%u\n",
+ debug_print (2, ("getting %s for %s:%u\n",
id == SASL_CB_AUTHNAME ? "authname" : "user",
account->host, account->port));
if (!account || !psecret)
return SASL_BADPARAM;
- dprint (2, (debugfile,
- "mutt_sasl_cb_pass: getting password for %s@%s:%u\n",
+ debug_print (2, ("getting password for %s@%s:%u\n",
account->user, account->host, account->port));
if (mutt_account_getpass (account))
rc = sasl_decode (sasldata->saslconn, buf, rc, &sasldata->buf,
&sasldata->blen);
if (rc != SASL_OK) {
- dprint (1, (debugfile, "SASL decode failed: %s\n",
+ debug_print (1, ("SASL decode failed: %s\n",
sasl_errstring (rc, NULL, NULL)));
goto out;
}
rc = sasl_encode (sasldata->saslconn, buf, olen, &pbuf, &plen);
if (rc != SASL_OK) {
- dprint (1, (debugfile, "SASL encoding failed: %s\n",
+ debug_print (1, ("SASL encoding failed: %s\n",
sasl_errstring (rc, NULL, NULL)));
goto fail;
}
projects / apps / madmutt.git / blobdiff