- Type: boolean
-
- Default: no
-
- Availability: IMAP
-
- This variable configures whether IMAP folder browsing will look for only
- subscribed folders or all folders. This can be toggled in the IMAP browser
- with the toggle-subscribed function.
-
-106. $imap_login
-
- Type: string
-
- Default: ""
-
- Availability: IMAP
-
- Your login name on the IMAP server.
-
- This variable defaults to the value of ``$imap_user.''
-
-107. $imap_mail_check
-
- Type: number
-
- Default: 300
-
- This variable configures how often (in seconds) Mutt-ng should look for
- new mail in IMAP folders. This is split from the ``mail_check'' variable
- to generate less traffic and get more accurate information for local
- folders.
-
-108. $imap_pass
-
- Type: string
-
- Default: ""
-
- Availability: IMAP
-
- Specifies the password for your IMAP account. If unset, Mutt-ng will
- prompt you for your password when you invoke the fetch-mail function.
-
- Warning: you should only use this option when you are on a fairly secure
- machine, because the superuser can read your configuration even if you are
- the only one who can read the file.
-
-109. $imap_passive
-
- Type: boolean
-
- Default: yes
-
- Availability: IMAP
-
- When set, Mutt-ng will not open new IMAP connections to check for new
- mail. Mutt-ng will only check for new mail over existing IMAP connections.
- This is useful if you don't want to be prompted to user/password pairs on
- Mutt-ng invocation, or if opening the connection is slow.
-
-110. $imap_peek
-
- Type: boolean
-
- Default: yes
-
- Availability: IMAP
-
- If set, Mutt-ng will avoid implicitly marking your mail as read whenever
- you fetch a message from the server. This is generally a good thing, but
- can make closing an IMAP folder somewhat slower. This option exists to
- appease speed freaks.
-
-111. $imap_reconnect
-
- Type: quadoption
-
- Default: ask-yes
-
- Availability: IMAP
-
- Controls whether or not Mutt-ng will try to reconnect to IMAP server when
- the connection is lost.
-
-112. $imap_servernoise
-
- Type: boolean
-
- Default: yes
-
- Availability: IMAP
-
- When set, Mutt-ng will display warning messages from the IMAP server as
- error messages. Since these messages are often harmless, or generated due
- to configuration problems on the server which are out of the users' hands,
- you may wish to suppress them at some point.
-
-113. $imap_user
-
- Type: string
-
- Default: ""
-
- Availability: IMAP
-
- The name of the user whose mail you intend to access on the IMAP server.
-
- This variable defaults to your user name on the local machine.
-
-114. $implicit_autoview
-
- Type: boolean
-
- Default: no
-
- If set, Mutt-ng will look for a mailcap entry with the ``copiousoutput''
- flag set for every MIME attachment it doesn't have an internal viewer
- defined for. If such an entry is found, Mutt-ng will use the viewer
- defined in that entry to convert the body part to text form.
-
-115. $include
-
- Type: quadoption
-
- Default: ask-yes
-
- Controls whether or not a copy of the message(s) you are replying to is
- included in your reply.
-
-116. $include_onlyfirst
-
- Type: boolean
-
- Default: no
-
- Controls whether or not Mutt-ng includes only the first attachment of the
- message you are replying.
-
-117. $indent_string
-
- Type: string
-
- Default: "> "
-
- Specifies the string to prepend to each line of text quoted in a message
- to which you are replying. You are strongly encouraged not to change this
- value, as it tends to agitate the more fanatical netizens.
-
-118. $index_format
-
- Type: string
-
- Default: "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"
-
- This variable allows you to customize the message index display to your
- personal taste.
-
- ``Format strings'' are similar to the strings used in the ``C'' function
- printf(3) to format output (see the man page for more detail). The
- following sequences are defined in Mutt-ng:
-
- %a
-
- address of the author
-
- %A
-
- reply-to address (if present; otherwise: address of author)
-
- %b
-
- filename of the original message folder (think mailBox)
-
- %B
-
- the list to which the letter was sent, or else the folder name
- (%b).
-
- %c
-
- number of characters (bytes) in the message
-
- %C
-
- current message number
-
- %d
-
- date and time of the message in the format specified by
- ``date_format'' converted to sender's time zone
-
- %D
-
- date and time of the message in the format specified by
- ``date_format'' converted to the local time zone
-
- %e
-
- current message number in thread
-
- %E
-
- number of messages in current thread
-
- %f
-
- entire From: line (address + real name)
-
- %F
-
- author name, or recipient name if the message is from you
-
- %H
-
- spam attribute(s) of this message
-
- %g
-
- newsgroup name (if compiled with nntp support)
-
- %i
-
- message-id of the current message
-
- %l
-
- number of lines in the message (does not work with maildir, mh,
- and possibly IMAP folders)
-
- %L
-
- If an address in the To or CC header field matches an address
- defined by the users ``subscribe'' command, this displays "To
- <list-name>", otherwise the same as %F.
-
- %m
-
- total number of message in the mailbox
-
- %M
-
- number of hidden messages if the thread is collapsed.
-
- %N
-
- message score
-
- %n
-
- author's real name (or address if missing)
-
- %O
-
- (_O_riginal save folder) Where Mutt-ng would formerly have stashed
- the message: list name or recipient name if no list
-
- %s
-
- subject of the message
-
- %S
-
- status of the message (N/D/d/!/r/*)
-
- %t
-
- `to:' field (recipients)
-
- %T
-
- the appropriate character from the $to_chars string
-
- %u
-
- user (login) name of the author
-
- %v
-
- first name of the author, or the recipient if the message is from
- you
-
- %W
-
- name of organization of author (`organization:' field)
-
- %X
-
- number of attachments
-
- %y
-
- `x-label:' field, if present
-
- %Y
-
- `x-label' field, if present, and (1) not at part of a thread tree,
- (2) at the top of a thread, or (3) `x-label' is different from
- preceding message's `x-label'.
-
- %Z
-
- message status flags
-
- %{fmt}
-
- the date and time of the message is converted to sender's time
- zone, and ``fmt'' is expanded by the library function
- ``strftime''; a leading bang disables locales
-
- %[fmt]
-
- the date and time of the message is converted to the local time
- zone, and ``fmt'' is expanded by the library function
- ``strftime''; a leading bang disables locales
-
- %(fmt)
-
- the local date and time when the message was received. ``fmt'' is
- expanded by the library function ``strftime''; a leading bang
- disables locales
-
- %<fmt>
-
- the current local time. ``fmt'' is expanded by the library
- function ``strftime''; a leading bang disables locales.
-
- %>X
-
- right justify the rest of the string and pad with character "X"
-
- %|X
-
- pad to the end of the line with character "X"
-
- See also: ``$to_chars''.
-
-119. $ispell
-
- Type: path
-
- Default: "ispell"
-
- How to invoke ispell (GNU's spell-checking software).
-
-120. $keep_flagged
-
- Type: boolean
-
- Default: no
-
- If set, read messages marked as flagged will not be moved from your spool
- mailbox to your ``$mbox'' mailbox, or as a result of a ``mbox-hook''
- command.
-
-121. $locale
-
- Type: string
-
- Default: "C"
-
- The locale used by strftime(3) to format dates. Legal values are the
- strings your system accepts for the locale variable LC_TIME.
-
-122. $mail_check
-
- Type: number
-
- Default: 5
-
- This variable configures how often (in seconds) Mutt-ng should look for
- new mail.
-
- Note: This does not apply to IMAP mailboxes, see $imap_mail_check.
-
-123. $mailcap_path
-
- Type: string
-
- Default: ""
-
- This variable specifies which files to consult when attempting to display
- MIME bodies not directly supported by Mutt-ng.
-
-124. $mailcap_sanitize
-
- Type: boolean
-
- Default: yes
-
- If set, Mutt-ng will restrict possible characters in mailcap % expandos to
- a well-defined set of safe characters. This is the safe setting, but we
- are not sure it doesn't break some more advanced MIME stuff.
-
- DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE DOING!
-
-125. $maildir_header_cache_verify
-
- Type: boolean
-
- Default: yes
-
- Availability: Header Cache
-
- Check for Maildir unaware programs other than Mutt-ng having modified
- maildir files when the header cache is in use. This incurs one stat(2) per
- message every time the folder is opened.
-
-126. $maildir_trash
-
- Type: boolean
-
- Default: no
-
- If set, messages marked as deleted will be saved with the maildir
- (T)rashed flag instead of physically deleted.
-
- NOTE: this only applies to maildir-style mailboxes. Setting it will have
- no effect on other mailbox types.
-
- It is similiar to the trash option.
-
-127. $mark_old
-
- Type: boolean
-
- Default: yes
-
- Controls whether or not Mutt-ng marks newunread messages as old if you
- exit a mailbox without reading them.
-
- With this option set, the next time you start Mutt-ng, the messages will
- show up with an "O" next to them in the ``index'' menu, indicating that
- they are old.
-
-128. $markers
-
- Type: boolean
-
- Default: yes
-
- Controls the display of wrapped lines in the internal pager. If set, a
- ``+'' marker is displayed at the beginning of wrapped lines. Also see the
- ``$smart_wrap'' variable.
-
-129. $mask
-
- Type: regular expression
-
- Default: "!^\.[^.]"
-
- A regular expression used in the file browser, optionally preceded by the
- not operator ``!''. Only files whose names match this mask will be shown.
- The match is always case-sensitive.
-
-130. $max_display_recips
-
- Type: number
-
- Default: 0
-
- When set non-zero, this specifies the maximum number of recipient header
- lines (To:, Cc: and Bcc:) to display in the pager if header weeding is
- turned on. In case the number of lines exeeds its value, the last line
- will have 3 dots appended.
-
-131. $max_line_length
-
- Type: number
-
- Default: 0
-
- When set, the maximum line length for displaying ``format = flowed''
- messages is limited to this length. A value of 0 (which is also the
- default) means that the maximum line length is determined by the terminal
- width and $wrapmargin.
-
-132. $mbox
-
- Type: path
-
- Default: "~/mbox"
-
- This specifies the folder into which read mail in your ``$spoolfile''
- folder will be appended.
-
-133. $mbox_type
-
- Type: folder magic
-
- Default: mbox
-
- The default mailbox type used when creating new folders. May be any of
- mbox, MMDF, MH and Maildir.
-
-134. $menu_context
-
- Type: number
-
- Default: 0
-
- This variable controls the number of lines of context that are given when
- scrolling through menus. (Similar to ``$pager_context''.)
-
-135. $menu_move_off
-
- Type: boolean
-
- Default: yes
-
- When unset, the bottom entry of menus will never scroll up past the bottom
- of the screen, unless there are less entries than lines. When set, the
- bottom entry may move off the bottom.
-
-136. $menu_scroll
-
- Type: boolean
-
- Default: no
-
- When set, menus will be scrolled up or down one line when you attempt to
- move across a screen boundary. If unset, the screen is cleared and the
- next or previous page of the menu is displayed (useful for slow links to
- avoid many redraws).
-
-137. $message_format
-
- Type: string
-
- Default: "%s"
-
- This is the string displayed in the ``attachment'' menu for attachments of
- type message/rfc822. For a full listing of defined printf(3)-like
- sequences see the section on ``$index_format''.
-
-138. $meta_key
-
- Type: boolean
-
- Default: no
-
- If set, forces Mutt-ng to interpret keystrokes with the high bit (bit 8)
- set as if the user had pressed the ESC key and whatever key remains after
- having the high bit removed. For example, if the key pressed has an ASCII
- value of 0xf8, then this is treated as if the user had pressed ESC then
- ``x''. This is because the result of removing the high bit from ``0xf8''
- is ``0x78'', which is the ASCII character ``x''.
-
-139. $metoo
-
- Type: boolean
-
- Default: no
-
- If unset, Mutt-ng will remove your address (see the ``alternates''
- command) from the list of recipients when replying to a message.
-
-140. $mh_purge
-
- Type: boolean
-
- Default: no
-
- When unset, Mutt-ng will mimic mh's behaviour and rename deleted messages
- to ,<old file name> in mh folders instead of really deleting them. If the
- variable is set, the message files will simply be deleted.
-
-141. $mh_seq_flagged
-
- Type: string
-
- Default: "flagged"
-
- The name of the MH sequence used for flagged messages.
-
-142. $mh_seq_replied
-
- Type: string
-
- Default: "replied"
-
- The name of the MH sequence used to tag replied messages.
-
-143. $mh_seq_unseen
-
- Type: string
-
- Default: "unseen"
-
- The name of the MH sequence used for unseen messages.
-
-144. $mime_forward
-
- Type: quadoption
-
- Default: no
-
- When set, the message you are forwarding will be attached as a separate
- MIME part instead of included in the main body of the message.
-
- This is useful for forwarding MIME messages so the receiver can properly
- view the message as it was delivered to you. If you like to switch between
- MIME and not MIME from mail to mail, set this variable to ask-no or
- ask-yes.
-
- Also see ``$forward_decode'' and ``$mime_forward_decode''.
-
-145. $mime_forward_decode
-
- Type: boolean
-
- Default: no
-
- Controls the decoding of complex MIME messages into text/plain when
- forwarding a message while ``$mime_forward'' is set. Otherwise
- ``$forward_decode'' is used instead.
-
-146. $mime_forward_rest
-
- Type: quadoption
-
- Default: yes
-
- When forwarding multiple attachments of a MIME message from the recvattach
- menu, attachments which cannot be decoded in a reasonable manner will be
- attached to the newly composed message if this option is set.
-
-147. $mix_entry_format
-
- Type: string
-
- Default: "%4n %c %-16s %a"
-
- Availability: Mixmaster
-
- This variable describes the format of a remailer line on the mixmaster
- chain selection screen. The following printf(3)-like sequences are
- supported:
-
- %n
-
- The running number on the menu.
-
- %c
-
- Remailer capabilities.
-
- %s
-
- The remailer's short name.
-
- %a
-
- The remailer's e-mail address.
-
-148. $mixmaster
-
- Type: path
-
- Default: "mixmaster"
-
- Availability: Mixmaster
-
- This variable contains the path to the Mixmaster binary on your system. It
- is used with various sets of parameters to gather the list of known
- remailers, and to finally send a message through the mixmaster chain.
-
-149. $move
-
- Type: quadoption
-
- Default: ask-no
-
- Controls whether or not Mutt-ng will move read messages from your spool
- mailbox to your ``$mbox'' mailbox, or as a result of a ``mbox-hook''
- command.
-
-150. $msgid_format
-
- Type: string
-
- Default: "%Y%m%d%h%M%s.G%P%p"
-
- This is the format for the ``local part'' of the Message-ID: header field
- generated by Mutt-ng. If this variable is empty, no Message-ID: headers
- will be generated. The '%' character marks that certain data will be added
- to the string, similar to printf(3). The following characters are allowed:
-
- %d
-
- the current day of month
-
- %h
-
- the current hour
-
- %m
-
- the current month
-
- %M
-
- the current minute
-
- %O
-
- the current UNIX timestamp (octal)
-
- %p
-
- the process ID
-
- %P
-
- the current Message-ID prefix (a character rotating with every
- Message-ID being generated)
-
- %r
-
- a random integer value (decimal)
-
- %R
-
- a random integer value (hexadecimal)
-
- %s
-
- the current second
-
- %T
-
- the current UNIX timestamp (decimal)
-
- %X
-
- the current UNIX timestamp (hexadecimal)
-
- %Y
-
- the current year (Y2K compliant)
-
- %%
-
- the '%' character
-
- Note: Please only change this setting if you know what you are doing. Also
- make sure to consult RFC2822 to produce technically valid strings.
-
-151. $muttng_bindir
-
- Type: system property
-
- Value: /opt/freebsd4/mutt-ng/bin
-
- This is a read-only system property and specifies the directory containing
- the muttng binary.
-
-152. $muttng_docdir
-
- Type: system property
-
- Value: /opt/freebsd4/mutt-ng/doc/muttng
-
- This is a read-only system property and specifies the directory containing
- the muttng documentation.
-
-153. $muttng_folder_name
-
- Type: system property
-
- Value:
-
- This is a read-only system property and, at runtime, specifies the last
- part of the full path or URI of the folder currently open (if any), i.e.
- everything after the last ``/''.
-
-154. $muttng_folder_path
-
- Type: system property
-
- Value:
-
- This is a read-only system property and, at runtime, specifies the full
- path or URI of the folder currently open (if any).
-
-155. $muttng_hcache_backend
-
- Type: system property
-
- Value: qdbm
-
- This is a read-only system property and specifies the header chaching's
- database backend.
-
-156. $muttng_pwd
-
- Type: system property
-
- Value:
-
- This is a read-only system property and, at runtime, specifies the current
- working directory of the muttng binary.
-
-157. $muttng_revision
-
- Type: system property
-
- Value: 545
-
- This is a read-only system property and specifies muttng's subversion
- revision string.
-
-158. $muttng_sysconfdir
-
- Type: system property
-
- Value: /opt/freebsd4/mutt-ng/etc
-
- This is a read-only system property and specifies the directory containing
- the muttng system-wide configuration.
-
-159. $muttng_version
-
- Type: system property
-
- Value: devel
-
- This is a read-only system property and specifies muttng's version string.
-
-160. $narrow_tree
-
- Type: boolean
-
- Default: no
-
- This variable, when set, makes the thread tree narrower, allowing deeper
- threads to fit on the screen.
-
-161. $net_inc
-
- Type: number
-
- Default: 10
-
- Operations that expect to transfer a large amount of data over the network
- will update their progress every net_inc kilobytes. If set to 0, no
- progress messages will be displayed.
-
- See also ``$read_inc'' and ``$write_inc''.
-
-162. $nntp_ask_followup_to
-
- Type: boolean
-
- Default: no
-
- Availability: NNTP
-
- If set, Mutt-ng will prompt you for the Followup-To: header field before
- editing the body of an outgoing news article.
-
-163. $nntp_ask_x_comment_to
-
- Type: boolean
-
- Default: no
-
- Availability: NNTP
-
- If set, Mutt-ng will prompt you for the X-Comment-To: header field before
- editing the body of an outgoing news article.
-
-164. $nntp_cache_dir
-
- Type: path
-
- Default: "~/.muttng"
-
- Availability: NNTP
-
- This variable points to directory where Mutt-ng will cache news article
- headers. If unset, headers will not be saved at all and will be reloaded
- each time when you enter a newsgroup.
-
- As for the header caching in connection with IMAP and/or Maildir, this
- drastically increases speed and lowers traffic.
-
-165. $nntp_catchup
-
- Type: quadoption
-
- Default: ask-yes
-
- Availability: NNTP
-
- If this variable is set, Mutt-ng will mark all articles in a newsgroup as
- read when you leaving it.
-
-166. $nntp_context
-
- Type: number
-
- Default: 1000
-
- Availability: NNTP
-
- This variable controls how many news articles to cache per newsgroup (if
- caching is enabled, see $nntp_cache_dir) and how many news articles to
- show in the ``index'' menu.
-
- If there're more articles than defined with $nntp_context, all older ones
- will be removed/not shown in the index.
-
-167. $nntp_followup_to_poster
-
- Type: quadoption
-
- Default: ask-yes
-
- Availability: NNTP
-
- If this variable is set and the keyword "poster" is present in the
- Followup-To: header field, a follow-up to the newsgroup is not permitted.
- The message will be mailed to the submitter of the message via mail.
-
-168. $nntp_group_index_format
-
- Type: string
-
- Default: "%4C %M%N %5s %-45.45f %d"
-
- Availability: NNTP
-
- This variable allows you to customize the newsgroup browser display to
- your personal taste. This string is similar to ``index_format'', but has
- its own set of printf(3)-like sequences:
-
- %C current newsgroup number
- %d description of newsgroup (retrieved from server)
- %f newsgroup name
- %M ``-'' if newsgroup not allowed for direct post (moderated for example)
- %N ``N'' if newsgroup is new, ``u'' if unsubscribed, blank otherwise
- %n number of new articles in newsgroup
- %s number of unread articles in newsgroup
- %>X right justify the rest of the string and pad with character "X"
- %|X pad to the end of the line with character "X"
-
-
-169. $nntp_host
-
- Type: string
-
- Default: ""
-
- Availability: NNTP
-
- This variable specifies the name (or address) of the NNTP server to be
- used.
-
- It defaults to the value specified via the environment variable
- $NNTPSERVER or contained in the file /etc/nntpserver.
-
- You can also specify a username and an alternative port for each
- newsserver, e.g.
-
- [nntp[s]://][username[:password]@]newsserver[:port]
-
- Note: Using a password as shown and stored in a configuration file
- presents a security risk since the superuser of your machine may read it
- regardless of the file's permissions.
-
-170. $nntp_inews
-
- Type: path
-
- Default: ""
-
- Availability: NNTP
-
- If set, specifies the program and arguments used to deliver news posted by
- Mutt-ng. Otherwise, Mutt-ng posts article using current connection. The
- following printf(3)-style sequence is understood:
-
- %s newsserver name
-
-
- Example: set inews="/usr/local/bin/inews -hS"
-
-171. $nntp_load_description
-
- Type: boolean
-
- Default: yes
-
- Availability: NNTP
-
- This variable controls whether or not descriptions for newsgroups are to
- be loaded when subscribing to a newsgroup.
-
-172. $nntp_mail_check
-
- Type: number
-
- Default: 60
-
- Availability: NNTP
-
- The time in seconds until any operations on a newsgroup except posting a
- new article will cause a recheck for new news. If set to 0, Mutt-ng will
- recheck on each operation in index (stepping, read article, etc.).
-
-173. $nntp_mime_subject
-
- Type: boolean
-
- Default: yes
-
- Availability: NNTP
-
- If unset, an 8-bit ``Subject:'' header field in a news article will not be
- encoded according to RFC2047.
-
- Note: Only change this setting if you know what you are doing.
-
-174. $nntp_newsrc
-
- Type: path
-
- Default: "~/.newsrc"
-
- Availability: NNTP
-
- This file contains information about subscribed newsgroup and articles
- read so far.
-
- To ease the use of multiple news servers, the following printf(3)-style
- sequence is understood:
-
- %s newsserver name
-
-
-175. $nntp_pass
-
- Type: string
-
- Default: ""
-
- Availability: NNTP
-
- Your password for NNTP account.
-
- Note: Storing passwords in a configuration file presents a security risk
- since the superuser of your machine may read it regardless of the file's
- permissions.
-
-176. $nntp_post_moderated
-
- Type: quadoption
-
- Default: ask-yes
-
- Availability: NNTP
-
- If set to yes, Mutt-ng will post articles to newsgroup that have not
- permissions to post (e.g. moderated).
-
- Note: if the newsserver does not support posting to that newsgroup or a
- group is totally read-only, that posting will not have any effect.
-
-177. $nntp_reconnect
-
- Type: quadoption
-
- Default: ask-yes
-
- Availability: NNTP
-
- Controls whether or not Mutt-ng will try to reconnect to a newsserver when
- the was connection lost.
-
-178. $nntp_save_unsubscribed
-
- Type: boolean
-
- Default: no
-
- Availability: NNTP
-
- When set, info about unsubscribed newsgroups will be saved into the
- ``newsrc'' file and into the news cache.
-
-179. $nntp_show_new_news
-
- Type: boolean
-
- Default: yes
-
- Availability: NNTP
-
- If set, the newsserver will be asked for new newsgroups on entering the
- browser. Otherwise, it will be done only once for a newsserver. Also
- controls whether or not the number of new articles of subscribed
- newsgroups will be checked.
-
-180. $nntp_show_only_unread
-
- Type: boolean
-
- Default: no
-
- Availability: NNTP
-
- If set, only subscribed newsgroups that contain unread articles will be
- displayed in the newsgroup browser.
-
-181. $nntp_user
-
- Type: string
-
- Default: ""
-
- Availability: NNTP
-
- Your login name on the NNTP server. If unset and the server requires
- authentification, Mutt-ng will prompt you for your account name.
-
-182. $nntp_x_comment_to
-
- Type: boolean
-
- Default: no
-
- Availability: NNTP
-
- If set, Mutt-ng will add a ``X-Comment-To:'' header field (that contains
- full name of the original article author) to articles that you followup
- to.
-
-183. $operating_system
-
- Type: string
-
- Default: ""
-
- This specifies the operating system name for the User-Agent: header field.
- If this is unset, it will be set to the operating system name that
- uname(2) returns. If uname(2) fails, ``UNIX'' will be used.
-
- It may, for example, look as: ``mutt-ng 1.5.9i (Linux)''.
-
-184. $pager
-
- Type: path
-
- Default: "builtin"
-
- This variable specifies which pager you would like to use to view
- messages. ``builtin'' means to use the builtin pager, otherwise this
- variable should specify the pathname of the external pager you would like
- to use.
-
- Using an external pager may have some disadvantages: Additional keystrokes
- are necessary because you can't call Mutt-ng functions directly from the
- pager, and screen resizes cause lines longer than the screen width to be
- badly formatted in the help menu.
-
-185. $pager_context
-
- Type: number
-
- Default: 0
-
- This variable controls the number of lines of context that are given when
- displaying the next or previous page in the internal pager. By default,
- Mutt-ng will display the line after the last one on the screen at the top
- of the next page (0 lines of context).
-
-186. $pager_format
-
- Type: string
-
- Default: "-%Z- %C/%m: %-20.20n %s"
-
- This variable controls the format of the one-line message ``status''
- displayed before each message in either the internal or an external pager.
- The valid sequences are listed in the ``$index_format'' section.
-
-187. $pager_index_lines
-
- Type: number
-
- Default: 0
-
- Determines the number of lines of a mini-index which is shown when in the
- pager. The current message, unless near the top or bottom of the folder,
- will be roughly one third of the way down this mini-index, giving the
- reader the context of a few messages before and after the message. This is
- useful, for example, to determine how many messages remain to be read in
- the current thread. One of the lines is reserved for the status bar from
- the index, so a pager_index_lines of 6 will only show 5 lines of the
- actual index. A value of 0 results in no index being shown. If the number
- of messages in the current folder is less than pager_index_lines, then the
- index will only use as many lines as it needs.
-
-188. $pager_stop
-
- Type: boolean
-
- Default: no
-
- When set, the internal-pager will not move to the next message when you
- are at the end of a message and invoke the next-page function.
-
-189. $pgp_auto_decode
-
- Type: boolean
-
- Default: no
-
- If set, Mutt-ng will automatically attempt to decrypt traditional PGP
- messages whenever the user performs an operation which ordinarily would
- result in the contents of the message being operated on. For example, if
- the user displays a pgp-traditional message which has not been manually
- checked with the check-traditional-pgp function, Mutt-ng will
- automatically check the message for traditional pgp.
-
-190. $pgp_autoinline
-
- Type: boolean
-
- Default: no
-
- This option controls whether Mutt-ng generates old-style inline
- (traditional) PGP encrypted or signed messages under certain
- circumstances. This can be overridden by use of the pgp-menu, when inline
- is not required.
-
- Note that Mutt-ng might automatically use PGP/MIME for messages which
- consist of more than a single MIME part. Mutt-ng can be configured to ask
- before sending PGP/MIME messages when inline (traditional) would not work.
- See also: ``$pgp_mime_auto''.
-
- Also note that using the old-style PGP message format is
- stronglydeprecated. (PGP only)
-
-191. $pgp_check_exit
-
- Type: boolean
-
- Default: yes
-
- If set, Mutt-ng will check the exit code of the PGP subprocess when
- signing or encrypting. A non-zero exit code means that the subprocess
- failed. (PGP only)
-
-192. $pgp_clearsign_command
-
- Type: string
-
- Default: ""
-
- This format is used to create a old-style ``clearsigned'' PGP message.
-
- Note that the use of this format is stronglydeprecated. (PGP only)
-
-193. $pgp_decode_command
-
- Type: string
-
- Default: ""
-
- This format strings specifies a command which is used to decode
- application/pgp attachments.
-
- The PGP command formats have their own set of printf(3)-like sequences:
-
- %p
-
- Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty
- string otherwise. Note: This may be used with a %? construct.
-
- %f
-
- Expands to the name of a file containing a message.
-
- %s
-
- Expands to the name of a file containing the signature part of a
- multipart/signed attachment when verifying it.
-
- %a
-
- The value of $pgp_sign_as.
-
- %r
-
- One or more key IDs.
-
- For examples on how to configure these formats for the various versions of
- PGP which are floating around, see the pgp*.rc and gpg.rc files in the
- samples/ subdirectory which has been installed on your system alongside
- the documentation. (PGP only)
-
-194. $pgp_decrypt_command
-
- Type: string
-
- Default: ""
-
- This command is used to decrypt a PGP encrypted message. (PGP only)
-
-195. $pgp_encrypt_only_command
-
- Type: string
-
- Default: ""
-
- This command is used to encrypt a body part without signing it. (PGP only)
-
-196. $pgp_encrypt_sign_command
-
- Type: string
-
- Default: ""
-
- This command is used to both sign and encrypt a body part. (PGP only)
-
-197. $pgp_entry_format
-
- Type: string
-
- Default: "%4n %t%f %4l/0x%k %-4a %2c %u"
-
- This variable allows you to customize the PGP key selection menu to your
- personal taste. This string is similar to ``$index_format'', but has its
- own set of printf(3)-like sequences:
-
- %n
-
- number
-
- %k
-
- key id
-
- %u
-
- user id
-
- %a
-
- algorithm
-
- %l
-
- key length
-
- %f
-
- flags
-
- %c
-
- capabilities
-
- %t
-
- trust/validity of the key-uid association
-
- %[<s>]
-
- date of the key where <s> is an strftime(3) expression
-
- (PGP only)
-
-198. $pgp_export_command
-
- Type: string
-
- Default: ""
-
- This command is used to export a public key from the user's key ring. (PGP
- only)
-
-199. $pgp_getkeys_command
-
- Type: string
-
- Default: ""
-
- This command is invoked whenever Mutt-ng will need public key information.
- %r is the only printf(3)-like sequence used with this format. (PGP only)
-
-200. $pgp_good_sign
-
- Type: regular expression
-
- Default: ""
-
- If you assign a text to this variable, then a PGP signature is only
- considered verified if the output from $pgp_verify_command contains the
- text. Use this variable if the exit code from the command is 0 even for
- bad signatures. (PGP only)
-
-201. $pgp_ignore_subkeys
-
- Type: boolean
-
- Default: yes
-
- Setting this variable will cause Mutt-ng to ignore OpenPGP subkeys.
- Instead, the principal key will inherit the subkeys' capabilities. Unset
- this if you want to play interesting key selection games. (PGP only)
-
-202. $pgp_import_command
-
- Type: string
-
- Default: ""
-
- This command is used to import a key from a message into the user's public
- key ring. (PGP only)
-
-203. $pgp_list_pubring_command
-
- Type: string
-
- Default: ""
-
- This command is used to list the public key ring's contents. The output
- format must be analogous to the one used by gpg --list-keys --with-colons.
-
- This format is also generated by the pgpring utility which comes with
- Mutt-ng. (PGP only)
-
-204. $pgp_list_secring_command
-
- Type: string
-
- Default: ""
-
- This command is used to list the secret key ring's contents. The output
- format must be analogous to the one used by gpg --list-keys --with-colons.
-
- This format is also generated by the pgpring utility which comes with
- Mutt-ng. (PGP only)
-
-205. $pgp_long_ids
-
- Type: boolean
-
- Default: no
-
- If set, use 64 bit PGP key IDs. Unset uses the normal 32 bit Key IDs. (PGP
- only)
-
-206. $pgp_mime_auto
-
- Type: quadoption
-
- Default: ask-yes
-
- This option controls whether Mutt-ng will prompt you for automatically
- sending a (signed/encrypted) message using PGP/MIME when inline
- (traditional) fails (for any reason).
-
- Also note that using the old-style PGP message format is
- stronglydeprecated. (PGP only)
-
-207. $pgp_replyinline
-
- Type: boolean
-
- Default: no
-
- Setting this variable will cause Mutt-ng to always attempt to create an
- inline (traditional) message when replying to a message which is PGP
- encrypted/signed inline. This can be overridden by use of the pgp-menu,
- when inline is not required. This option does not automatically detect if
- the (replied-to) message is inline; instead it relies on Mutt-ng internals
- for previously checked/flagged messages.
-
- Note that Mutt-ng might automatically use PGP/MIME for messages which
- consist of more than a single MIME part. Mutt-ng can be configured to ask
- before sending PGP/MIME messages when inline (traditional) would not work.
- See also: ``$pgp_mime_auto''.
-
- Also note that using the old-style PGP message format is
- stronglydeprecated. (PGP only)
-
-208. $pgp_retainable_sigs
-
- Type: boolean
-
- Default: no
-
- If set, signed and encrypted messages will consist of nested
- multipart/signed and multipart/encrypted body parts.
-
- This is useful for applications like encrypted and signed mailing lists,
- where the outer layer (multipart/encrypted) can be easily removed, while
- the inner multipart/signed part is retained. (PGP only)
-
-209. $pgp_show_unusable
-
- Type: boolean
-
- Default: yes
-
- If set, Mutt-ng will display non-usable keys on the PGP key selection
- menu. This includes keys which have been revoked, have expired, or have
- been marked as ``disabled'' by the user. (PGP only)
-
-210. $pgp_sign_as
-
- Type: string
-
- Default: ""
-
- If you have more than one key pair, this option allows you to specify
- which of your private keys to use. It is recommended that you use the
- keyid form to specify your key (e.g., ``0x00112233''). (PGP only)
-
-211. $pgp_sign_command
-
- Type: string
-
- Default: ""
-
- This command is used to create the detached PGP signature for a
- multipart/signed PGP/MIME body part. (PGP only)
-
-212. $pgp_sort_keys
-
- Type: sort order
-
- Default: address
-
- Specifies how the entries in the ``pgp keys'' menu are sorted. The
- following are legal values:
-
- address
-
- sort alphabetically by user id
-
- keyid
-
- sort alphabetically by key id
-
- date
-
- sort by key creation date
-
- trust
-
- sort by the trust of the key
-
- If you prefer reverse order of the above values, prefix it with
- ``reverse-''. (PGP only)
-
-213. $pgp_strict_enc
-
- Type: boolean
-
- Default: yes
-
- If set, Mutt-ng will automatically encode PGP/MIME signed messages as
- quoted-printable. Please note that unsetting this variable may lead to
- problems with non-verifyable PGP signatures, so only change this if you
- know what you are doing. (PGP only)
-
-214. $pgp_timeout
-
- Type: number
-
- Default: 300
-
- The number of seconds after which a cached passphrase will expire if not
- used. Default: 300. (PGP only)
-
-215. $pgp_use_gpg_agent
-
- Type: boolean
-
- Default: no
-
- If set, Mutt-ng will use a possibly-running gpg-agent process. (PGP only)
-
-216. $pgp_verify_command
-
- Type: string
-
- Default: ""
-
- This command is used to verify PGP signatures. (PGP only)
-
-217. $pgp_verify_key_command
-
- Type: string
-
- Default: ""
-
- This command is used to verify key information from the key selection
- menu. (PGP only)
-
-218. $pipe_decode
-
- Type: boolean
-
- Default: no
-
- Used in connection with the pipe-message command. When unset, Mutt-ng will
- pipe the messages without any preprocessing. When set, Mutt-ng will weed
- headers and will attempt to PGP/MIME decode the messages first.
-
-219. $pipe_sep
-
- Type: string
-
- Default: "\n"
-
- The separator to add between messages when piping a list of tagged
- messages to an external Unix command.
-
-220. $pipe_split
-
- Type: boolean
-
- Default: no
-
- Used in connection with the pipe-message command and the ``tag- prefix''
- or ``tag-prefix-cond'' operators. If this variable is unset, when piping a
- list of tagged messages Mutt-ng will concatenate the messages and will
- pipe them as a single folder. When set, Mutt-ng will pipe the messages one
- by one. In both cases the messages are piped in the current sorted order,
- and the ``$pipe_sep'' separator is added after each message.
-
-221. $pop_auth_try_all
-
- Type: boolean
-
- Default: yes
-
- Availability: POP
-
- If set, Mutt-ng will try all available methods. When unset, Mutt-ng will
- only fall back to other authentication methods if the previous methods are
- unavailable. If a method is available but authentication fails, Mutt-ng
- will not connect to the POP server.
-
-222. $pop_authenticators
-
- Type: string
-
- Default: ""
-
- Availability: POP
-
- This is a colon-delimited list of authentication methods Mutt-ng may
- attempt to use to log in to an POP server, in the order Mutt-ng should try
- them. Authentication methods are either ``user'', ``apop'' or any SASL
- mechanism, eg ``digest-md5'', ``gssapi'' or ``cram-md5''.
-
- This parameter is case-insensitive. If this parameter is unset (the
- default) Mutt-ng will try all available methods, in order from most-secure
- to least-secure.
-
- Example: set pop_authenticators="digest-md5:apop:user"
-
-223. $pop_delete
-
- Type: quadoption
-
- Default: ask-no
-
- Availability: POP
-
- If set, Mutt-ng will delete successfully downloaded messages from the POP
- server when using the ``fetch-mail'' function. When unset, Mutt-ng will
- download messages but also leave them on the POP server.
-
-224. $pop_host
-
- Type: string
-
- Default: ""
-
- Availability: POP
-
- The name of your POP server for the ``fetch-mail'' function. You can also
- specify an alternative port, username and password, i.e.:
-
- [pop[s]://][username[:password]@]popserver[:port]
-
- Note: Storing passwords in a configuration file presents a security risk
- since the superuser of your machine may read it regardless of the file's
- permissions.
-
-225. $pop_last
-
- Type: boolean
-
- Default: no
-
- Availability: POP
-
- If this variable is set, Mutt-ng will try to use the ``LAST'' POP command
- for retrieving only unread messages from the POP server when using the
- ``fetch-mail'' function.
-
-226. $pop_mail_check
-
- Type: number
-
- Default: 60
-
- Availability: POP
-
- This variable configures how often (in seconds) Mutt-ng should look for
- new mail.
-
-227. $pop_pass
-
- Type: string
-
- Default: ""
-
- Availability: POP
-
- Specifies the password for your POP account. If unset, Mutt-ng will prompt
- you for your password when you open POP mailbox.
-
- Note: Storing passwords in a configuration file presents a security risk
- since the superuser of your machine may read it regardless of the file's
- permissions.
-
-228. $pop_reconnect
-
- Type: quadoption
-
- Default: ask-yes
-
- Availability: POP
-
- Controls whether or not Mutt-ng will try to reconnect to a POP server if
- the connection is lost.
-
-229. $pop_user
-
- Type: string
-
- Default: ""
-
- Availability: POP
-
- Your login name on the POP server.
-
- This variable defaults to your user name on the local machine.
-
-230. $post_indent_string
-
- Type: string
-
- Default: ""
-
- Similar to the ``$attribution'' variable, Mutt-ng will append this string
- after the inclusion of a message which is being replied to.
-
-231. $postpone
-
- Type: quadoption
-
- Default: ask-yes
-
- Controls whether or not messages are saved in the ``$postponed'' mailbox
- when you elect not to send immediately.
-
-232. $postponed
-
- Type: path
-
- Default: "~/postponed"
-
- Mutt-ng allows you to indefinitely ``postpone sending a message'' which
- you are editing. When you choose to postpone a message, Mutt-ng saves it
- in the mailbox specified by this variable. Also see the ``$postpone''
- variable.
-
-233. $preconnect
-
- Type: string
-
- Default: ""
-
- If set, a shell command to be executed if Mutt-ng fails to establish a
- connection to the server. This is useful for setting up secure
- connections, e.g. with ssh(1). If the command returns a nonzero status,
- Mutt-ng gives up opening the server. Example:
-
- preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net sleep 20 <
- /dev/null > /dev/null"
-
- Mailbox ``foo'' on mailhost.net can now be reached as
- ``{localhost:1234}foo''.
-
- Note: For this example to work, you must be able to log in to the remote
- machine without having to enter a password.
-
-234. $print
-
- Type: quadoption
-
- Default: ask-no
-
- Controls whether or not Mutt-ng really prints messages. This is set to
- ask-no by default, because some people accidentally hit ``p'' often.
-
-235. $print_command
-
- Type: path
-
- Default: "lpr"
-
- This specifies the command pipe that should be used to print messages.
-
-236. $print_decode
-
- Type: boolean
-
- Default: yes
-
- Used in connection with the print-message command. If this option is set,
- the message is decoded before it is passed to the external command
- specified by $print_command. If this option is unset, no processing will
- be applied to the message when printing it. The latter setting may be
- useful if you are using some advanced printer filter which is able to
- properly format e-mail messages for printing.
-
-237. $print_split
-
- Type: boolean
-
- Default: no
-
- Used in connection with the print-message command. If this option is set,
- the command specified by $print_command is executed once for each message
- which is to be printed. If this option is unset, the command specified by
- $print_command is executed only once, and all the messages are
- concatenated, with a form feed as the message separator.
-
- Those who use the enscript(1) program's mail-printing mode will most
- likely want to set this option.
-
-238. $prompt_after
-
- Type: boolean
-
- Default: yes
-
- If you use an external ``$pager'', setting this variable will cause
- Mutt-ng to prompt you for a command when the pager exits rather than
- returning to the index menu. If unset, Mutt-ng will return to the index
- menu when the external pager exits.
-
-239. $query_command
-
- Type: path
-
- Default: ""
-
- This specifies the command that Mutt-ng will use to make external address
- queries. The string should contain a %s, which will be substituted with
- the query string the user types. See ``query'' for more information.
-
-240. $quit
-
- Type: quadoption
-
- Default: yes
-
- This variable controls whether ``quit'' and ``exit'' actually quit from
- Mutt-ng. If it set to yes, they do quit, if it is set to no, they have no
- effect, and if it is set to ask-yes or ask-no, you are prompted for
- confirmation when you try to quit.
-
-241. $quote_empty
-
- Type: boolean
-
- Default: yes
-
- Controls whether or not empty lines will be quoted using
- ``indent_string''.
-
-242. $quote_quoted
-
- Type: boolean
-
- Default: no
-
- Controls how quoted lines will be quoted. If set, one quote character will
- be added to the end of existing prefix. Otherwise, quoted lines will be
- prepended by ``indent_string''.
-
-243. $quote_regexp
-
- Type: regular expression
-
- Default: "^([ \t]*[|>:}#])+"
-
- A regular expression used in the internal-pager to determine quoted
- sections of text in the body of a message.
-
- Note: In order to use the quotedx patterns in the internal pager, you need
- to set this to a regular expression that matches exactly the quote
- characters at the beginning of quoted lines.
-
-244. $read_inc
-
- Type: number
-
- Default: 10
-
- If set to a value greater than 0, Mutt-ng will display which message it is
- currently on when reading a mailbox. The message is printed after read_inc
- messages have been read (e.g., if set to 25, Mutt-ng will print a message
- when it reads message 25, and then again when it gets to message 50). This
- variable is meant to indicate progress when reading large mailboxes which
- may take some time. When set to 0, only a single message will appear
- before the reading the mailbox.
-
- Also see the ``$write_inc'' variable.
-
-245. $read_only
-
- Type: boolean
-
- Default: no
-
- If set, all folders are opened in read-only mode.
-
-246. $realname
-
- Type: string
-
- Default: ""
-
- This variable specifies what ``real'' or ``personal'' name should be used
- when sending messages.
-
- By default, this is the GECOS field from /etc/passwd.
-
- Note: This variable will not be used when the user has set a real name in
- the $from variable.
-
-247. $recall
-
- Type: quadoption
-
- Default: ask-yes
-
- Controls whether or not Mutt-ng recalls postponed messages when composing
- a new message. Also see ``$postponed''.
-
- Setting this variable to yes is not generally useful, and thus not
- recommended.
-
-248. $record
-
- Type: path
-
- Default: ""
-
- This specifies the file into which your outgoing messages should be
- appended. (This is meant as the primary method for saving a copy of your
- messages, but another way to do this is using the ``my_hdr'' command to
- create a Bcc: header field with your email address in it.)
-
- The value of $record is overridden by the ``$force_name'' and
- ``$save_name'' variables, and the ``fcc-hook'' command.
-
-249. $reply_regexp
-
- Type: regular expression
-
- Default: "^(re([\[0-9\]+])*|aw):[ \t]*"
-
- A regular expression used to recognize reply messages when threading and
- replying. The default value corresponds to the English ``Re:'' and the
- German ``Aw:''.
-
-250. $reply_self
-
- Type: boolean
-
- Default: no
-
- If unset and you are replying to a message sent by you, Mutt-ng will
- assume that you want to reply to the recipients of that message rather
- than to yourself.
-
-251. $reply_to
-
- Type: quadoption
-
- Default: ask-yes
-
- If set, when replying to a message, Mutt-ng will use the address listed in
- the ``Reply-To:'' header field as the recipient of the reply. If unset, it
- will use the address in the ``From:'' header field instead.
-
- This option is useful for reading a mailing list that sets the
- ``Reply-To:'' header field to the list address and you want to send a
- private message to the author of a message.
-
-252. $resolve
-
- Type: boolean
-
- Default: yes
-
- When set, the cursor will be automatically advanced to the next (possibly
- undeleted) message whenever a command that modifies the current message is
- executed.
-
-253. $reverse_alias
-
- Type: boolean
-
- Default: no
-
- This variable controls whether or not Mutt-ng will display the
- ``personal'' name from your aliases in the index menu if it finds an alias
- that matches the message's sender. For example, if you have the following
- alias:
-
- alias juser abd30425@somewhere.net (Joe User)
-
- and then you receive mail which contains the following header:
-
- From: abd30425@somewhere.net
-
- It would be displayed in the index menu as ``Joe User'' instead of
- ``abd30425@somewhere.net.'' This is useful when the person's e-mail
- address is not human friendly (like CompuServe addresses).
-
-254. $reverse_name
-
- Type: boolean
-
- Default: no
-
- It may sometimes arrive that you receive mail to a certain machine, move
- the messages to another machine, and reply to some the messages from
- there. If this variable is set, the default From: line of the reply
- messages is built using the address where you received the messages you
- are replying to if that address matches your alternates. If the variable
- is unset, or the address that would be used doesn't match your alternates,
- the From: line will use your address on the current machine.
-
-255. $reverse_realname
-
- Type: boolean
-
- Default: yes
-
- This variable fine-tunes the behaviour of the reverse_name feature. When
- it is set, Mutt-ng will use the address from incoming messages as-is,
- possibly including eventual real names. When it is unset, Mutt-ng will
- override any such real names with the setting of the realname variable.
-
-256. $rfc2047_parameters
-
- Type: boolean
-
- Default: no
-
- When this variable is set, Mutt-ng will decode RFC-2047-encoded MIME
- parameters. You want to set this variable when Mutt-ng suggests you to
- save attachments to files named like this:
-
- =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=
-
- When this variable is set interactively, the change doesn't have the
- desired effect before you have changed folders.
-
- Note that this use of RFC 2047's encoding is explicitly, prohibited by the
- standard, but nevertheless encountered in the wild.
-
- Also note that setting this parameter will not have the effect that
- Mutt-ng generates this kind of encoding. Instead, Mutt-ng will
- unconditionally use the encoding specified in RFC 2231.
-
-257. $save_address
-
- Type: boolean
-
- Default: no
-
- If set, Mutt-ng will take the sender's full address when choosing a
- default folder for saving a mail. If ``$save_name'' or ``$force_name'' is
- set too, the selection of the fcc folder will be changed as well.
-
-258. $save_empty
-
- Type: boolean
-
- Default: yes
-
- When unset, mailboxes which contain no saved messages will be removed when
- closed (the exception is ``$spoolfile'' which is never removed). If set,
- mailboxes are never removed.
-
- Note: This only applies to mbox and MMDF folders, Mutt-ng does not delete
- MH and Maildir directories.
-
-259. $save_name
-
- Type: boolean
-
- Default: no
-
- This variable controls how copies of outgoing messages are saved. When
- set, a check is made to see if a mailbox specified by the recipient
- address exists (this is done by searching for a mailbox in the ``$folder''
- directory with the username part of the recipient address). If the mailbox
- exists, the outgoing message will be saved to that mailbox, otherwise the
- message is saved to the ``$record'' mailbox.
-
- Also see the ``$force_name'' variable.
-
-260. $score
-
- Type: boolean
-
- Default: yes
-
- When this variable is unset, scoring is turned off. This can be useful to
- selectively disable scoring for certain folders when the
- ``$score_threshold_delete'' variable and friends are used.
-
-261. $score_threshold_delete
-
- Type: number
-
- Default: -1
-
- Messages which have been assigned a score equal to or lower than the value
- of this variable are automatically marked for deletion by Mutt-ng. Since
- Mutt-ng scores are always greater than or equal to zero, the default
- setting of this variable will never mark a message for deletion.
-
-262. $score_threshold_flag
-
- Type: number
-
- Default: 9999
-
- Messages which have been assigned a score greater than or equal to this
- variable's value are automatically marked ``flagged''.
-
-263. $score_threshold_read
-
- Type: number
-
- Default: -1
-
- Messages which have been assigned a score equal to or lower than the value
- of this variable are automatically marked as read by Mutt-ng. Since
- Mutt-ng scores are always greater than or equal to zero, the default
- setting of this variable will never mark a message read.
-
-264. $send_charset
-
- Type: string
-
- Default: "us-ascii:iso-8859-1:utf-8"
-
- A list of character sets for outgoing messages. Mutt-ng will use the first
- character set into which the text can be converted exactly. If your
- ``$charset'' is not iso-8859-1 and recipients may not understand UTF-8, it
- is advisable to include in the list an appropriate widely used standard
- character set (such as iso-8859-2, koi8-r or iso-2022-jp) either instead
- of or after iso-8859-1.
-
-265. $sendmail
-
- Type: path
-
- Default: "/usr/sbin/sendmail -oem -oi"
-
- Specifies the program and arguments used to deliver mail sent by Mutt-ng.
- Mutt-ng expects that the specified program interprets additional arguments
- as recipient addresses.
-
-266. $sendmail_wait
-
- Type: number
-
- Default: 0
-
- Specifies the number of seconds to wait for the ``$sendmail'' process to
- finish before giving up and putting delivery in the background.
-
- Mutt-ng interprets the value of this variable as follows:
-
- >0
-
- number of seconds to wait for sendmail to finish before continuing
-
- 0
-
- wait forever for sendmail to finish
-
- <0
-
- always put sendmail in the background without waiting
-
- Note that if you specify a value other than 0, the output of the child
- process will be put in a temporary file. If there is some error, you will
- be informed as to where to find the output.
-
-267. $shell
-
- Type: path
-
- Default: ""
-
- Command to use when spawning a subshell. By default, the user's login
- shell from /etc/passwd is used.
-
-268. $sidebar_boundary
-
- Type: string
-
- Default: "."
-
- When the sidebar is displayed and $sidebar_shorten_hierarchy is set, this
- variable specifies the characters at which to split a folder name into
- ``hierarchy items.''
-
-269. $sidebar_delim
-
- Type: string
-
- Default: "|"
-
- This specifies the delimiter between the sidebar (if visible) and other
- screens.
-
-270. $sidebar_newmail_only
-
- Type: boolean
-
- Default: no
-
- If set, only folders with new mail will be shown in the sidebar.
-
-271. $sidebar_number_format
-
- Type: string
-
- Default: "%m%?n?(%n)?%?f?[%f]?"
-
- This variable controls how message counts are printed when the sidebar is
- enabled. If this variable is empty (and only if), no numbers will be
- printed and Mutt-ng won't frequently count mail (which may be a great
- speedup esp. with mbox-style mailboxes.)
-
- The following printf(3)-like sequences are supported all of which may be
- printed non-zero:
-
- %d
-
- Number of deleted messages. 1)
-
- %F
-
- Number of flagged messages.
-
- %m
-
- Total number of messages.
-
- %M
-
- Total number of messages shown, i.e. not hidden by a limit. 1)
-
- %n
-
- Number of new messages.
-
- %t
-
- Number of tagged messages. 1)
-
- 1) These expandos only have a non-zero value for the current mailbox and
- will always be zero otherwise.
-
-272. $sidebar_shorten_hierarchy
-
- Type: boolean
-
- Default: no
-
- When set, the ``hierarchy'' of the sidebar entries will be shortened only
- if they cannot be printed in full length (because ``$sidebar_width'' is
- set to a too low value). For example, if the newsgroup name
- ``de.alt.sysadmin.recovery'' doesn't fit on the screen, it'll get
- shortened ``d.a.s.recovery'' while ``de.alt.d0'' still would and thus will
- not get shortened.
-
- At which characters this compression is done is controled via the
- $sidebar_boundary variable.
-
-273. $sidebar_visible
-
- Type: boolean
-
- Default: no
-
- This specifies whether or not to show the sidebar (a list of folders
- specified with the ``mailboxes'' command).
-
-274. $sidebar_width
-
- Type: number
-
- Default: 0
-
- The width of the sidebar.
-
-275. $sig_dashes
-
- Type: boolean
-
- Default: yes
-
- If set, a line containing ``-- '' (dash, dash, space) will be inserted
- before your ``$signature''. It is strongly recommended that you not unset
- this variable unless your ``signature'' contains just your name. The
- reason for this is because many software packages use ``-- \n'' to detect
- your signature.
-
- For example, Mutt-ng has the ability to highlight the signature in a
- different color in the builtin pager.
-
-276. $sig_on_top
-
- Type: boolean
-
- Default: no
-
- If set, the signature will be included before any quoted or forwarded
- text. It is strongly recommended that you do not set this variable unless
- you really know what you are doing, and are prepared to take some heat
- from netiquette guardians.
-
-277. $signature
-
- Type: path
-
- Default: "~/.signature"
-
- Specifies the filename of your signature, which is appended to all
- outgoing messages. If the filename ends with a pipe (``|''), it is assumed
- that filename is a shell command and input should be read from its stdout.
-
-278. $signoff_string
-
- Type: string
-
- Default: ""
-
- If set, this string will be inserted before the signature. This is useful
- for people that want to sign off every message they send with their name.
-
- If you want to insert your website's URL, additional contact information
- or witty quotes into your mails, better use a signature file instead of
- the signoff string.
-
-279. $simple_search
-
- Type: string
-
- Default: "~f %s | ~s %s"
-
- Specifies how Mutt-ng should expand a simple search into a real search
- pattern. A simple search is one that does not contain any of the ~
- operators. See ``patterns'' for more information on search patterns.
-
- For example, if you simply type ``joe'' at a search or limit prompt,
- Mutt-ng will automatically expand it to the value specified by this
- variable. For the default value it would be:
-
- ~f joe | ~s joe
-
-280. $sleep_time
-
- Type: number
-
- Default: 1
-
- Specifies time, in seconds, to pause while displaying certain
- informational messages, while moving from folder to folder and after
- expunging messages from the current folder. The default is to pause one
- second, so a value of zero for this option suppresses the pause.
-
-281. $smart_wrap
-
- Type: boolean
-
- Default: yes
-
- Controls the display of lines longer than the screen width in the internal
- pager. If set, long lines are wrapped at a word boundary. If unset, lines
- are simply wrapped at the screen edge. Also see the ``$markers'' variable.
-
-282. $smileys
-
- Type: regular expression
-
- Default: "(>From )|(:[-^]?[][)(><}{|/DP])"
-
- The pager uses this variable to catch some common false positives of
- ``$quote_regexp'', most notably smileys in the beginning of a line
-
-283. $smime_ask_cert_label
-
- Type: boolean
-
- Default: yes
-
- This flag controls whether you want to be asked to enter a label for a
- certificate about to be added to the database or not. It is set by
- default. (S/MIME only)
-
-284. $smime_ca_location
-
- Type: path
-
- Default: ""
-
- This variable contains the name of either a directory, or a file which
- contains trusted certificates for use with OpenSSL. (S/MIME only)
-
-285. $smime_certificates
-
- Type: path
-
- Default: ""
-
- Since there is no pubring/secring as with PGP, Mutt-ng has to handle
- storage and retrieval of keys by itself. This is very basic right now, and
- keys and certificates are stored in two different directories, both named
- as the hash-value retrieved from OpenSSL. There is an index file which
- contains mailbox-address keyid pairs, and which can be manually edited.
- This one points to the location of the certificates. (S/MIME only)
-
-286. $smime_decrypt_command
-
- Type: string
-
- Default: ""
-
- This format string specifies a command which is used to decrypt
- application/x-pkcs7-mime attachments.
-
- The OpenSSL command formats have their own set of printf(3)-like sequences
- similar to PGP's:
-
- %f
-
- Expands to the name of a file containing a message.
-
- %s
-
- Expands to the name of a file containing the signature part of a
- multipart/signed attachment when verifying it.
-
- %k
-
- The key-pair specified with $smime_default_key
-
- %c
-
- One or more certificate IDs.
-
- %a
-
- The algorithm used for encryption.
-
- %C
-
- CA location: Depending on whether $smime_ca_location points to a
- directory or file, this expands to "-CApath $smime_ca_location" or
- "-CAfile $smime_ca_location".
-
- For examples on how to configure these formats, see the smime.rc in the
- samples/ subdirectory which has been installed on your system alongside
- the documentation. (S/MIME only)
-
-287. $smime_decrypt_use_default_key
-
- Type: boolean
-
- Default: yes
-
- If set (default) this tells Mutt-ng to use the default key for decryption.
- Otherwise, if manage multiple certificate-key-pairs, Mutt-ng will try to
- use the mailbox-address to determine the key to use. It will ask you to
- supply a key, if it can't find one. (S/MIME only)
-
-288. $smime_default_key
-
- Type: string
-
- Default: ""
-
- This is the default key-pair to use for signing. This must be set to the
- keyid (the hash-value that OpenSSL generates) to work properly (S/MIME
- only)
-
-289. $smime_encrypt_command
-
- Type: string
-
- Default: ""
-
- This command is used to create encrypted S/MIME messages. (S/MIME only)
-
-290. $smime_encrypt_with
-
- Type: string
-
- Default: ""
-
- This sets the algorithm that should be used for encryption. Valid choices
- are ``des'', ``des3'', ``rc2-40'', ``rc2-64'', ``\frc2-128''.
-
- If unset ``3des'' (TripleDES) is used. (S/MIME only)
-
-291. $smime_get_cert_command
-
- Type: string
-
- Default: ""
-
- This command is used to extract X509 certificates from a PKCS7 structure.
- (S/MIME only)
-
-292. $smime_get_cert_email_command
-
- Type: string
-
- Default: ""
-
- This command is used to extract the mail address(es) used for storing X509
- certificates, and for verification purposes (to check whether the
- certificate was issued for the sender's mailbox). (S/MIME only)
-
-293. $smime_get_signer_cert_command
-
- Type: string
-
- Default: ""
-
- This command is used to extract only the signers X509 certificate from a
- S/MIME signature, so that the certificate's owner may get compared to the
- email's ``From:'' header field. (S/MIME only)
-
-294. $smime_import_cert_command
-
- Type: string
-
- Default: ""
-
- This command is used to import a certificate via smime_keysng. (S/MIME
- only)
-
-295. $smime_is_default
-
- Type: boolean
-
- Default: no
-
- The default behaviour of Mutt-ng is to use PGP on all auto-sign/encryption
- operations. To override and to use OpenSSL instead this must be set.
-
- However, this has no effect while replying, since Mutt-ng will
- automatically select the same application that was used to sign/encrypt
- the original message.
-
- (Note that this variable can be overridden by unsetting $crypt_autosmime.)
- (S/MIME only)
-
-296. $smime_keys
-
- Type: path
-
- Default: ""
-
- Since there is no pubring/secring as with PGP, Mutt-ng has to handle
- storage ad retrieval of keys/certs by itself. This is very basic right
- now, and stores keys and certificates in two different directories, both
- named as the hash-value retrieved from OpenSSL. There is an index file
- which contains mailbox-address keyid pair, and which can be manually
- edited. This one points to the location of the private keys. (S/MIME only)
-
-297. $smime_pk7out_command
-
- Type: string
-
- Default: ""
-
- This command is used to extract PKCS7 structures of S/MIME signatures, in
- order to extract the public X509 certificate(s). (S/MIME only)
-
-298. $smime_sign_command
-
- Type: string
-
- Default: ""
-
- This command is used to created S/MIME signatures of type
- multipart/signed, which can be read by all mail clients. (S/MIME only)
-
-299. $smime_sign_opaque_command
-
- Type: string
-
- Default: ""
-
- This command is used to created S/MIME signatures of type
- application/x-pkcs7-signature, which can only be handled by mail clients
- supporting the S/MIME extension. (S/MIME only)
-
-300. $smime_timeout
-
- Type: number
-
- Default: 300
-
- The number of seconds after which a cached passphrase will expire if not
- used. (S/MIME only)
-
-301. $smime_verify_command
-
- Type: string
-
- Default: ""
-
- This command is used to verify S/MIME signatures of type multipart/signed.
- (S/MIME only)
-
-302. $smime_verify_opaque_command
-
- Type: string
-
- Default: ""
-
- This command is used to verify S/MIME signatures of type
- application/x-pkcs7-mime. (S/MIME only)
-
-303. $smtp_host
-
- Type: string
-
- Default: ""
-
- Availability: SMTP
-
- Defines the SMTP host which will be used to deliver mail, as opposed to
- invoking the sendmail binary. Setting this variable overrides the value of
- ``$sendmail'', and any associated variables.
-
-304. $smtp_pass
-
- Type: string
-
- Default: ""
-
- Availability: SMTP
-
- Defines the password to use with SMTP AUTH. If ``$smtp_user'' is set, but
- this variable is not, you will be prompted for a password when sending.
-
- Note: Storing passwords in a configuration file presents a security risk
- since the superuser of your machine may read it regardless of the file's
- permissions.
-
-305. $smtp_port
-
- Type: number
-
- Default: 25
-
- Availability: SMTP
-
- Defines the port that the SMTP host is listening on for mail delivery.
- Must be specified as a number.
-
- Defaults to 25, the standard SMTP port, but RFC 2476-compliant SMTP
- servers will probably desire 587, the mail submission port.
-
-306. $smtp_use_tls
-
- Type: string
-
- Default: ""
-
- Availability: SMTP (and SSL)
-
- Defines wether to use STARTTLS. If this option is set to ``required'' and
- the server does not support STARTTLS or there is an error in the TLS
- Handshake, the connection will fail. Setting this to ``enabled'' will try
- to start TLS and continue without TLS in case of an error. Muttng still
- needs to have SSL support enabled in order to use it.
-
-307. $smtp_user
-
- Type: string
-
- Default: ""
-
- Availability: SMTP
-
- Defines the username to use with SMTP AUTH. Setting this variable will
- cause Mutt-ng to attempt to use SMTP AUTH when sending.
-
-308. $sort
-
- Type: sort order
-
- Default: date
-
- Specifies how to sort messages in the index menu. Valid values are:
-
- date or date-sent
- date-received
- from
- mailbox-order (unsorted)
- score
- size
- spam
- subject
- threads
- to
-
-
- You may optionally use the ``reverse-'' prefix to specify reverse sorting
- order (example: set sort=reverse-date-sent).
-
-309. $sort_alias
-
- Type: sort order
-
- Default: alias
-
- Specifies how the entries in the ``alias'' menu are sorted. The following
- are legal values:
-
- address (sort alphabetically by email address)
- alias (sort alphabetically by alias name)
- unsorted (leave in order specified in .muttrc)
-
-
-310. $sort_aux
-
- Type: sort order
-
- Default: date
-
- When sorting by threads, this variable controls how threads are sorted in
- relation to other threads, and how the branches of the thread trees are
- sorted. This can be set to any value that ``$sort'' can, except threads
- (in that case, Mutt-ng will just use date-sent). You can also specify the
- ``last-'' prefix in addition to ``reverse-'' prefix, but last- must come
- after reverse-. The last- prefix causes messages to be sorted against its
- siblings by which has the last descendant, using the rest of sort_aux as
- an ordering.
-
- For instance, set sort_aux=last-date-received would mean that if a new
- message is received in a thread, that thread becomes the last one
- displayed (or the first, if you have set sort=reverse-threads.)
-
- Note: For reversed ``$sort'' order $sort_aux is reversed again (which is
- not the right thing to do, but kept to not break any existing
- configuration setting).
-
-311. $sort_browser
-
- Type: sort order
-
- Default: alpha
-
- Specifies how to sort entries in the file browser. By default, the entries
- are sorted alphabetically. Valid values:
-
- alpha (alphabetically)
- date
- size
- unsorted
-
-
- You may optionally use the ``reverse-'' prefix to specify reverse sorting
- order (example: set sort_browser=reverse-date).
-
-312. $sort_re
-
- Type: boolean
-
- Default: yes
-
- This variable is only useful when sorting by threads with
- ``$strict_threads'' unset. In that case, it changes the heuristic Mutt-ng
- uses to thread messages by subject. With $sort_reset, Mutt-ng will only
- attach a message as the child of another message by subject if the subject
- of the child message starts with a substring matching the setting of
- ``$reply_regexp''. With $sort_reunset, Mutt-ng will attach the message
- whether or not this is the case, as long as the non-``$reply_regexp''
- parts of both messages are identical.
-
-313. $spam_separator
-
- Type: string
-
- Default: ","
-
- ``spam_separator'' controls what happens when multiple spam headers are
- matched: if unset, each successive header will overwrite any previous
- matches value for the spam label. If set, each successive match will
- append to the previous, using ``spam_separator'' as a separator.
-
-314. $spoolfile
-
- Type: path
-
- Default: ""
-
- If your spool mailbox is in a non-default place where Mutt-ng cannot find
- it, you can specify its location with this variable. Mutt-ng will
- automatically set this variable to the value of the environment variable
- $MAIL if it is not set.
-
-315. $ssl_ca_certificates_file
-
- Type: path
-
- Default: ""
-
- This variable specifies a file containing trusted CA certificates. Any
- server certificate that is signed with one of these CA certificates are
- also automatically accepted.
-
- Example: set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt
-
-316. $ssl_client_cert
-
- Type: path
-
- Default: ""
-
- Availability: SSL
-
- The file containing a client certificate and its associated private key.
-
-317. $ssl_force_tls
-
- Type: boolean
-
- Default: no
-
- If this variable is set, Mutt-ng will require that all connections to
- remote servers be encrypted. Furthermore it will attempt to negotiate TLS
- even if the server does not advertise the capability, since it would
- otherwise have to abort the connection anyway. This option supersedes
- ``$ssl_starttls''.
-
-318. $ssl_min_dh_prime_bits
-
- Type: number
-
- Default: 0
-
- Availability: GNUTLS
-
- This variable specifies the minimum acceptable prime size (in bits) for
- use in any Diffie-Hellman key exchange. A value of 0 will use the default
- from the GNUTLS library.
-
-319. $ssl_starttls
-
- Type: quadoption
-
- Default: yes
-
- Availability: SSL or GNUTLS
-
- If set (the default), Mutt-ng will attempt to use STARTTLS on servers
- advertising the capability. When unset, Mutt-ng will not attempt to use
- STARTTLS regardless of the server's capabilities.
-
-320. $ssl_use_sslv2
-
- Type: boolean
-
- Default: yes
-
- Availability: SSL
-
- This variables specifies whether to attempt to use SSLv2 in the SSL
- authentication process.
-
-321. $ssl_use_sslv3
-
- Type: boolean
-
- Default: yes
-
- Availability: SSL or GNUTLS
-
- This variables specifies whether to attempt to use SSLv3 in the SSL
- authentication process.
-
-322. $ssl_use_tlsv1
-
- Type: boolean
-
- Default: yes
-
- Availability: SSL or GNUTLS
-
- This variables specifies whether to attempt to use TLSv1 in the SSL
- authentication process.
-
-323. $ssl_usesystemcerts
-
- Type: boolean
-
- Default: yes
-
- Availability: SSL
-
- If set to yes, Mutt-ng will use CA certificates in the system-wide
- certificate store when checking if server certificate is signed by a
- trusted CA.
-
-324. $status_chars
-
- Type: string
-
- Default: "-*%A"
-
- Controls the characters used by the ``%r'' indicator in
- ``$status_format''. The first character is used when the mailbox is
- unchanged. The second is used when the mailbox has been changed, and it
- needs to be resynchronized. The third is used if the mailbox is in
- read-only mode, or if the mailbox will not be written when exiting that
- mailbox (You can toggle whether to write changes to a mailbox with the
- toggle-write operation, bound by default to ``%''). The fourth is used to
- indicate that the current folder has been opened in attach-message mode
- (Certain operations like composing a new mail, replying, forwarding, etc.
- are not permitted in this mode).
-
-325. $status_format
-
- Type: string
-
- Default: "-%r-Mutt-ng: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d?
- Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l?
- %l?]---(%s/%S)-%>-(%P)---"
-
- Controls the format of the status line displayed in the index menu. This
- string is similar to ``$index_format'', but has its own set of
- printf(3)-like sequences:
-
- %b
-
- number of mailboxes with new mail *
-
- %B
-
- the short pathname of the current mailbox
-
- %d
-
- number of deleted messages *
-
- %f
-
- the full pathname of the current mailbox
-
- %F
-
- number of flagged messages *
-
- %h
-
- local hostname
-
- %l
-
- size (in bytes) of the current mailbox *
-
- %L
-
- size (in bytes) of the messages shown (i.e., which match the
- current limit) *
-
- %m
-
- the number of messages in the mailbox *
-
- %M
-
- the number of messages shown (i.e., which match the current limit)
- *
-
- %n
-
- number of new messages in the mailbox *
-
- %o
-
- number of old unread messages *
-
- %p
-
- number of postponed messages *
-
- %P
-
- percentage of the way through the index
-
- %r
-
- modified/read-only/won't-write/attach-message indicator, according
- to $status_chars
-
- %s
-
- current sorting mode ($sort)
-
- %S
-
- current aux sorting method ($sort_aux)
-
- %t
-
- number of tagged messages *
-
- %u
-
- number of unread messages *
-
- %v
-
- Mutt-ng version string
-
- %V
-
- currently active limit pattern, if any *
-
- %>X
-
- right justify the rest of the string and pad with "X"
-
- %|X
-
- pad to the end of the line with "X"
-
- * = can be optionally printed if nonzero
-
- Some of the above sequences can be used to optionally print a string if
- their value is nonzero. For example, you may only want to see the number
- of flagged messages if such messages exist, since zero is not particularly
- meaningful. To optionally print a string based upon one of the above
- sequences, the following construct is used
-
- %?<sequence_char>?<optional_string>?
-
- where sequence_char is a character from the table above, and
- optional_string is the string you would like printed if sequence_char is
- nonzero. optional_stringmay contain other sequences as well as normal
- text, but you may not nest optional strings.
-
- Here is an example illustrating how to optionally print the number of new
- messages in a mailbox:
-
- %?n?%n new messages.?
-
- Additionally you can switch between two strings, the first one, if a value
- is zero, the second one, if the value is nonzero, by using the following
- construct:
-
- %?<sequence_char>?<if_string>&<else_string>?
-
- You can additionally force the result of any printf(3)-like sequence to be
- lowercase by prefixing the sequence character with an underscore (_) sign.
- For example, if you want to display the local hostname in lowercase, you
- would use:
-
- %_h
-
- If you prefix the sequence character with a colon (:) character, Mutt-ng
- will replace any dots in the expansion by underscores. This might be
- helpful with IMAP folders that don't like dots in folder names.
-
-326. $status_on_top
-
- Type: boolean
-
- Default: no
-
- Setting this variable causes the ``status bar'' to be displayed on the
- first line of the screen rather than near the bottom.
-
-327. $strict_mailto
-
- Type: boolean
-
- Default: yes
-
- With mailto: style links, a body as well as arbitrary header information
- may be embedded. This may lead to (user) headers being overwriten without
- note if ``$edit_headers'' is unset.
-
- If this variable is set, Mutt-ng is strict and allows anything to be
- changed. If it's unset, all headers given will be prefixed with
- ``X-Mailto-'' and the message including headers will be shown in the
- editor regardless of what ``$edit_headers'' is set to.
-
-328. $strict_mime
-
- Type: boolean
-
- Default: yes
-
- When unset, non MIME-compliant messages that doesn't have any charset
- indication in the ``Content-Type:'' header field can be displayed (non
- MIME-compliant messages are often generated by old mailers or buggy
- mailers like MS Outlook Express). See also $assumed_charset.
-
- This option also replaces linear-white-space between encoded-word and
- *text to a single space to prevent the display of MIME-encoded
- ``Subject:'' header field from being devided into multiple lines.
-
-329. $strict_threads
-
- Type: boolean
-
- Default: no
-
- If set, threading will only make use of the ``In-Reply-To:'' and
- ``References:'' header fields when you ``$sort'' by message threads. By
- default, messages with the same subject are grouped together in ``pseudo
- threads.'' This may not always be desirable, such as in a personal mailbox
- where you might have several unrelated messages with the subject ``hi''
- which will get grouped together. See also ``$sort_re'' for a less drastic
- way of controlling this behaviour.
-
-330. $strip_was
-
- Type: boolean
-
- Default: no
-
- When set, Mutt-ng will remove the trailing part of the ``Subject:'' line
- which matches $strip_was_regex when replying. This is useful to properly
- react on subject changes and reduce ``subject noise.'' (esp. in Usenet)
-
-331. $strip_was_regex
-
- Type: regular expression
-
- Default: "\([Ww][Aa][RrSs]: .*\)[ ]*$"
-
- When non-empty and $strip_was is set, Mutt-ng will remove this trailing
- part of the ``Subject'' line when replying if it won't be empty
- afterwards.
-
-332. $stuff_quoted
-
- Type: boolean
-
- Default: no
-
- If set, attachments with flowed format will have their quoting
- ``stuffed'', i.e. a space will be inserted between the quote characters
- and the actual text.
-
-333. $suspend
-
- Type: boolean
-
- Default: yes
-
- When unset, Mutt-ng won't stop when the user presses the terminal's susp
- key, usually CTRL+Z. This is useful if you run Mutt-ng inside an xterm
- using a command like ``xterm -e muttng.''
-
-334. $text_flowed
-
- Type: boolean
-
- Default: no
-
- When set, Mutt-ng will generate text/plain; format=flowed attachments.
- This format is easier to handle for some mailing software, and generally
- just looks like ordinary text. To actually make use of this format's
- features, you'll need support in your editor.
-
- Note that $indent_string is ignored when this option is set.
-
-335. $thorough_search
-
- Type: boolean
-
- Default: no
-
- Affects the ~b and ~h search operations described in section ``patterns''
- above. If set, the headers and attachments of messages to be searched are
- decoded before searching. If unset, messages are searched as they appear
- in the folder.
-
-336. $thread_received
-
- Type: boolean
-
- Default: no
-
- When set, Mutt-ng uses the date received rather than the date sent to
- thread messages by subject.
-
-337. $tilde
-
- Type: boolean
-
- Default: no
-
- When set, the internal-pager will pad blank lines to the bottom of the
- screen with a tilde (~).
-
-338. $timeout
-
- Type: number
-
- Default: 600
-
- This variable controls the number of seconds Mutt-ng will wait for a key
- to be pressed in the main menu before timing out and checking for new
- mail. A value of zero or less will cause Mutt-ng to never time out.
-
-339. $tmpdir
-
- Type: path
-
- Default: ""
-
- This variable allows you to specify where Mutt-ng will place its temporary
- files needed for displaying and composing messages. If this variable is
- not set, the environment variable $TMPDIR is used. If $TMPDIR is not set
- then "/tmp" is used.
-
-340. $to_chars
-
- Type: string
-
- Default: " +TCFL"
-
- Controls the character used to indicate mail addressed to you. The first
- character is the one used when the mail is NOT addressed to your address
- (default: space). The second is used when you are the only recipient of
- the message (default: +). The third is when your address appears in the
- ``To:'' header field, but you are not the only recipient of the message
- (default: T). The fourth character is used when your address is specified
- in the ``Cc:'' header field, but you are not the only recipient. The fifth
- character is used to indicate mail that was sent by you. The sixth
- character is used to indicate when a mail was sent to a mailing-list
- you're subscribe to (default: L).
-
-341. $trash
-
- Type: path
-
- Default: ""
-
- If set, this variable specifies the path of the trash folder where the
- mails marked for deletion will be moved, instead of being irremediably
- purged.
-
- Note: When you delete a message in the trash folder, it is really deleted,
- so that there is no way to recover mail.
-
-342. $tunnel
-
- Type: string
-
- Default: ""
-
- Setting this variable will cause Mutt-ng to open a pipe to a command
- instead of a raw socket. You may be able to use this to set up
- preauthenticated connections to your IMAP/POP3 server. Example:
-
- tunnel="ssh -q mailhost.net /usr/local/libexec/imapd"
-
- Note: For this example to work you must be able to log in to the remote
- machine without having to enter a password.
-
-343. $umask
-
- Type: number
-
- Default: 0077
-
- This sets the umask that will be used by Mutt-ng when creating all kinds
- of files. If unset, the default value is 077.
-
-344. $uncollapse_jump
-
- Type: boolean
-
- Default: no
-
- When set, Mutt-ng will jump to the next unread message, if any, when the
- current thread is uncollapsed.
-
-345. $use_8bitmime
-
- Type: boolean
-
- Default: no
-
- Warning: do not set this variable unless you are using a version of
- sendmail which supports the -B8BITMIME flag (such as sendmail 8.8.x) or in
- connection with the SMTP support via libESMTP. Otherwise you may not be
- able to send mail.
-
- When set, Mutt-ng will either invoke ``$sendmail'' with the -B8BITMIME
- flag when sending 8-bit messages to enable ESMTP negotiation or tell
- libESMTP to do so.
-
-346. $use_domain
-
- Type: boolean
-
- Default: yes
-
- When set, Mutt-ng will qualify all local addresses (ones without the @host
- portion) with the value of ``$hostname''. If unset, no addresses will be
- qualified.
-
-347. $use_envelope_from
-
- Type: boolean
-
- Default: no
-
- When set, Mutt-ng will use ``$envelope_from_address'' as the envelope
- sender if that is set, otherwise it will attempt to derive it from the
- "From:" header.
-
- Note: This information is passed to sendmail command using the "-f"
- command line switch and passed to the SMTP server for libESMTP (if support
- is compiled in).
-
-348. $use_from
-
- Type: boolean
-
- Default: yes
-
- When set, Mutt-ng will generate the ``From:'' header field when sending
- messages. If unset, no ``From:'' header field will be generated unless the
- user explicitly sets one using the ``my_hdr'' command.
-
-349. $use_idn
-
- Type: boolean
-
- Default: yes
-
- Availability: IDN
-
- When set, Mutt-ng will show you international domain names decoded.
-
- Note: You can use IDNs for addresses even if this is unset. This variable
- only affects decoding.
-
-350. $use_ipv6
-
- Type: boolean
-
- Default: yes
-
- When set, Mutt-ng will look for IPv6 addresses of hosts it tries to
- contact. If this option is unset, Mutt-ng will restrict itself to IPv4
- addresses. Normally, the default should work.
-
-351. $visual
-
- Type: path
-
- Default: ""
-
- Specifies the visual editor to invoke when the ~v command is given in the
- builtin editor.
-
-352. $wait_key
-
- Type: boolean
-
- Default: yes
-
- Controls whether Mutt-ng will ask you to press a key after shell- escape,
- pipe-message, pipe-entry, print-message, and print-entry commands.
-
- It is also used when viewing attachments with ``auto_view'', provided that
- the corresponding mailcap entry has a needsterminal flag, and the external
- program is interactive.
-
- When set, Mutt-ng will always ask for a key. When unset, Mutt-ng will wait
- for a key only if the external command returned a non-zero status.
-
-353. $weed
-
- Type: boolean
-
- Default: yes
-
- When set, Mutt-ng will weed headers when displaying, forwarding, printing,
- or replying to messages.
-
-354. $wrap_search
-
- Type: boolean
-
- Default: yes
-
- Controls whether searches wrap around the end of the mailbox.
-
- When set, searches will wrap around the first (or last) message. When
- unset, searches will not wrap.
-
-355. $wrapmargin
-
- Type: number
-
- Default: 0
-
- Controls the size of the margin remaining at the right side of the
- terminal when Mutt-ng's pager does smart wrapping.
-
-356. $write_bcc
-
- Type: boolean
-
- Default: yes
-
- Controls whether Mutt-ng writes out the Bcc header when preparing messages
- to be sent. Exim users may wish to unset this.
-
-357. $write_inc
-
- Type: number
-
- Default: 10
-
- When writing a mailbox, a message will be printed every write_inc messages
- to indicate progress. If set to 0, only a single message will be displayed
- before writing a mailbox.
-
- Also see the ``$read_inc'' variable.
-
-358. $xterm_icon
-
- Type: string
-
- Default: "M%?n?AIL&ail?"
-
- Controls the format of the X11 icon title, as long as $xterm_set_titles is
- set. This string is identical in formatting to the one used by
- ``$status_format''.
-
-359. $xterm_leave
-
- Type: string
-
- Default: ""
-
- If $xterm_set_titles is set, this string will be used to set the title
- when leaving Mutt-ng. For terminal-based programs, there's no easy and
- portable way to read the current title so Mutt-ng cannot read it upon
- startup and restore it when exiting.
-
- Based on the xterm FAQ, the following might work:
-
- set xterm_leave = "`test x$DISPLAY != x && xprop -id $WINDOWID | grep
- WM_NAME | cut -d '"' -f 2`"
-
-360. $xterm_set_titles
-
- Type: boolean
-
- Default: no
-
- Controls whether Mutt-ng sets the xterm title bar and icon name (as long
- as you're in an appropriate terminal). The default must be unset to force
- in the validity checking.
-
-361. $xterm_title
-
- Type: string
-
- Default: "Mutt-ng with %?m?%m messages&no messages?%?n? [%n New]?"
-
- Controls the format of the title bar of the xterm provided that
- $xterm_set_titles has been set. This string is identical in formatting to
- the one used by ``$status_format''.
-
-5. Functions
-
- The following is the list of available functions listed by the mapping in
- which they are available. The default key setting is given, and an
- explanation of what the function does. The key bindings of these functions
- can be changed with the bind command.
-
- 5.1. generic
-
- The generic menu is not a real menu, but specifies common functions (such
- as movement) available in all menus except for pager and editor. Changing
- settings for this menu will affect the default bindings for all menus
- (except as noted).
-
- Table 7.4. Reference: Default Generic Function Bindings
-
- Function Default Key Description
- <bottom-page> L move to the bottom of the page
- <current-bottom> move current entry to bottom of page
- <current-middle> move current entry to middle of page
- <current-top> move current entry to top of page
- <enter-command> : enter a muttngrc command
- <exit> q exit this menu
- <first-entry> = move to the first entry
- <half-down> ] scroll down 1/2 page
- <half-up> [ scroll up 1/2 page
- <help> ? this screen
- <jump> number jump to an index number
- <last-entry> * move to the last entry
- <middle-page> M move to the middle of the page
- <next-entry> j move to the next entry
- <next-line> > scroll down one line
- <next-page> z move to the next page
- <previous-entry> k move to the previous entry
- <previous-line> > scroll up one line
- <previous-page> Z move to the previous page
- <refresh> C-L clear and redraw the screen
- <search> / search for a regular expression
- <search-next> n search for next match
- <search-opposite> search for next match in opposite direction
- <search-reverse> E-/ search backwards for a regular expression
- <select-entry> Return select the current entry
- <shell-escape> ! run a program in a subshell
- <tag-entry> t toggle the tag on the current entry
- <tag-prefix> ; apply next command to tagged entries
- <tag-prefix-cond> apply next function ONLY to tagged messages
- <top-page> H move to the top of the page
- <what-key> display the keycode for a key press
-
- 5.2. index
-
- Table 7.5. Reference: Default Index Function Bindings
-
- Function Default Key Description
- <bounce-message> b remail a message to another user
- <change-folder> c open a different folder
- <change-folder-readonly> E-c open a different folder in read
- only mode
- <check-traditional-pgp> E-P check for classic pgp
- <clear-flag> W clear a status flag from a message
- <copy-message> C copy a message to a file/mailbox
- <create-alias> a create an alias from a message
- sender
- <decode-copy> E-C decode a message and copy it to a
- file/mailbox
- <decode-save> E-s decode a message and save it to a
- file/mailbox
- <delete-message> d delete the current entry
- <delete-pattern> D delete messages matching a pattern
- <delete-subthread> E-d delete all messages in subthread
- <delete-thread> C-D delete all messages in thread
- <display-address> @ display full address of sender
- <display-toggle-weed> h display message and toggle header
- weeding
- <display-message> Return display a message
- <edit> e edit the current message
- <edit-type> C-E edit the current message's
- Content-Type
- <exit> x exit without saving changes
- <extract-keys> C-K extract PGP public keys
- <fetch-mail> G retrieve mail from POP server
- <flag-message> F toggle a message's 'important' flag
- <forget-passphrase> C-F wipe PGP passphrase from memory
- <forward-message> f forward a message with comments
- <group-reply> g reply to all recipients
- <limit> l show only messages matching a
- pattern
- <list-reply> L reply to specified mailing list
- <mail> m compose a new mail message
- <mail-key> E-k mail a PGP public key
- <next-new> jump to the next new message
- <next-new-then-unread> Tab jump to the next new or unread
- message
- <next-subthread> E-n jump to the next subthread
- <next-thread> C-N jump to the next thread
- <next-undeleted> j move to the next undeleted message
- <next-unread> jump to the next unread message
- <parent-message> P jump to parent message in thread
- <pipe-message> | pipe message/attachment to a shell
- command
- <previous-new> jump to the previous new message
- <previous-new-then-unread> E-Tab jump to the previous new or unread
- message
- <previous-page> Z move to the previous page
- <previous-subthread> E-p jump to previous subthread
- <previous-thread> C-P jump to previous thread
- <previous-undeleted> k move to the last undelete message
- <previous-unread> jump to the previous unread message
- <print-message> p print the current entry
- <query> Q query external program for
- addresses
- <quit> q save changes to mailbox and quit
- <read-subthread> E-r mark the current subthread as read
- <read-thread> C-R mark the current thread as read
- <recall-message> R recall a postponed message
- <reply> r reply to a message
- <resend-message> E-e resend message and preserve MIME
- structure
- <save-message> s save message/attachment to a file
- <set-flag> w set a status flag on a message
- <show-version> V show the Mutt-ng version number and
- date
- <show-limit> E-l show currently active limit
- pattern, if any
- <sort-mailbox> o sort messages
- <sort-reverse> O sort messages in reverse order
- <sync-mailbox> $ save changes to mailbox
- <tag-pattern> T tag messages matching a pattern
- <tag-thread> E-t tag/untag all messages in the
- current thread
- <toggle-new> N toggle a message's 'new' flag
- <toggle-write> % toggle whether the mailbox will be
- rewritten
- <undelete-message> u undelete the current entry
- <undelete-pattern> U undelete messages matching a
- pattern
- <undelete-subthread> E-u undelete all messages in subthread
- <undelete-thread> C-U undelete all messages in thread
- <untag-pattern> C-T untag messages matching a pattern
- <view-attachments> v show MIME attachments
-
- 5.3. pager
-
- Table 7.6. Reference: Default Pager Function Bindings
-
- Function Default Key Description
- <bottom> jump to the bottom of the message
- <bounce-message> b remail a message to another user
- <change-folder> c open a different folder
- <change-folder-readonly> E-c open a different folder in read
- only mode
- <check-traditional-pgp> E-P check for classic pgp
- <copy-message> C copy a message to a file/mailbox
- <create-alias> a create an alias from a message
- <senderdecode-copy> E-C decode a message and copy it to a
- file/mailbox
- <decode-save> E-s decode a message and save it to a
- file/mailbox
- <delete-message> d delete the current entry
- <delete-subthread> E-d delete all messages in subthread
- <delete-thread> C-D delete all messages in thread
- <display-address> @ display full address of sender
- <display-toggle-weed> h display message and toggle header
- weeding
- <edit> e edit the current message
- <edit-type> C-E edit the current message's
- Content-Type
- <enter-command> : enter a muttngrc command
- <exit> i return to the main-menu
- <extract-keys> C-K extract PGP public keys
- <flag-message> F toggle a message's 'important' flag
- <forget-passphrase> C-F wipe PGP passphrase from memory
- <forward-message> f forward a message with comments
- <group-reply> g reply to all recipients
- <half-up> move up one-half page
- <half-down> move down one-half page
- <help> ? this screen
- <list-reply> L reply to specified mailing list
- <mail> m compose a new mail message
- <mail-key> E-k mail a PGP public key
- <mark-as-new> N toggle a message's 'new' flag
- <next-line> Return scroll down one line
- <next-entry> J move to the next entry
- <next-new> jump to the next new message
- <next-new-then-unread> Tab jump to the next new or unread
- message
- <next-page> move to the next page
- <next-subthread> E-n jump to the next subthread
- <next-thread> C-N jump to the next thread
- <next-undeleted> j move to the next undeleted message
- <next-unread> jump to the next unread message
- <parent-message> P jump to parent message in thread
- <pipe-message> | pipe message/attachment to a shell
- command
- <previous-line> BackSpace scroll up one line
- <previous-entry> K move to the previous entry
- <previous-new> jump to the previous new message
- <previous-new-then-unread> jump to the previous new or unread
- message
- <previous-page> - move to the previous page
- <previous-subthread> E-p jump to previous subthread
- <previous-thread> C-P jump to previous thread
- <previous-undeleted> k move to the last undelete message
- <previous-unread> jump to the previous unread message
- <print-message> p print the current entry
- <quit> Q save changes to mailbox and quit
- <read-subthread> E-r mark the current subthread as read
- <read-thread> C-R mark the current thread as read
- <recall-message> R recall a postponed message
- <redraw-screen> C-L clear and redraw the screen
- <reply> r reply to a message
- <save-message> s save message/attachment to a file
- <search> / search for a regular expression
- <search-next> n search for next match
- <search-opposite> search for next match in opposite
- direction
- <search-reverse> E-/ search backwards for a regular
- expression
- <search-toggle> \ toggle search pattern coloring
- <shell-escape> ! invoke a command in a subshell
- <show-version> V show the Mutt-ng version number and
- date
- <skip-quoted> S skip beyond quoted text
- <sync-mailbox> $ save changes to mailbox
- <tag-message> t tag a message
- <toggle-quoted> T toggle display of quoted text
- <top> ^ jump to the top of the message
- <undelete-message> u undelete the current entry
- <undelete-subthread> E-u undelete all messages in subthread
- <undelete-thread> C-U undelete all messages in thread
- <view-attachments> v show MIME attachments
-
- 5.4. alias
-
- Table 7.7. Reference: Default Alias Menu Function Bindings
-
- Function Default Key Description
- <search> / search for a regular expression
- <search-next> n search for next match
- <search-reverse> E-/ search backwards for a regular expression
-
- 5.5. query
-
- Table 7.8. Reference: Default Query Menu Function Bindings
-
- Function Default Key Description
- <create-alias> a create an alias from a message sender
- <mail> m compose a new mail message
- <query> Q query external program for addresses
- <query-append> A append new query results to current results
- <search> / search for a regular expression
- <search-next> n search for next match
- <search-opposite> search for next match in opposite direction
- <search-reverse> E-/ search backwards for a regular expression
-
- 5.6. attach
-
- Table 7.9. Reference: Default Attachment Menu Function Bindings
-
- Function Default Key Description
- <bounce-message> b remail a message to another user
- <collapse-parts> v toggle display of subparts
- <delete-entry> d delete the current entry
- <display-toggle-weed> h display message and toggle header
- weeding
- <edit-type> C-E edit the current entry's Content-Type
- <extract-keys> C-K extract PGP public keys
- <forward-message> f forward a message with comments
- <group-reply> g reply to all recipients
- <list-reply> L reply to specified mailing list
- <pipe-entry> | pipe message/attachment to a shell
- command
- <print-entry> p print the current entry
- <reply> r reply to a message
- <resend-message> E-e resend message and preserve MIME
- structure
- <save-entry> s save message/attachment to a file
- <undelete-entry> u undelete the current entry
- <view-attach> Return view attachment using mailcap entry if
- necessary
- <view-mailcap> m force viewing of attachment using
- mailcap
- <view-text> T view attachment as text
-
- 5.7. compose
-
- Table 7.10. Reference: Default Compose Menu Function Bindings
-
- Function Default Key Description
- <attach-file> a attach a file(s) to this message
- <attach-message> A attach message(s) to this message
- <attach-key> E-k attach a PGP public key
- <copy-file> C save message/attachment to a file
- <detach-file> D delete the current entry
- <display-toggle-weed> h display message and toggle header
- weeding
- <edit-bcc> b edit the BCC list
- <edit-cc> c edit the CC list
- <edit-description> d edit attachment description
- <edit-encoding> C-E edit attachment transfer-encoding
- <edit-fcc> f enter a file to save a copy of this
- message in
- <edit-from> E-f edit the from: field
- <edit-file> C-X e edit the file to be attached
- <edit-headers> E edit the message with headers
- <edit> e edit the message
- <edit-mime> m edit attachment using mailcap entry
- <edit-reply-to> r edit the Reply-To field
- <edit-subject> s edit the subject of this message
- <edit-to> t edit the TO list
- <edit-type> C-T edit attachment type
- <filter-entry> F filter attachment through a shell
- command
- <forget-passphrase> C-F wipe PGP passphrase from memory
- <ispell> i run ispell on the message
- <new-mime> n compose new attachment using mailcap
- entry
- <pgp-menu> p show PGP options
- <pipe-entry> | pipe message/attachment to a shell
- command
- <postpone-message> P save this message to send later
- <print-entry> l print the current entry
- <rename-file> R rename/move an attached file
- <send-message> y send the message
- <toggle-unlink> u toggle whether to delete file after
- sending it
- <view-attach> Return view attachment using mailcap entry if
- necessary
- <write-fcc> w write the message to a folder
-
- 5.8. postpone
-
- Table 7.11. Reference: Default Postpone Menu Function Bindings
-
- Function Default Key Description
- <delete-entry> d delete the current entry
- <undelete-entry> u undelete the current entry
-
- 5.9. browser
-
- Table 7.12. Reference: Default Browser Menu Function Bindings
-
- Function Default Key Description
- <change-dir> c change directories
- <check-new> Tab check mailboxes for new mail
- <enter-mask> m enter a file mask
- <search> / search for a regular expression
- <search-next> n search for next match
- <search-reverse> E-/ search backwards for a regular expression
- <select-new> N select a new file in this directory
- <sort> o sort messages
- <sort-reverse> O sort messages in reverse order
- <toggle-mailboxes> Tab toggle whether to browse mailboxes or all
- files
- <view-file> Space view file
- <subscribe> s subscribe to current mailbox (IMAP Only)
- <unsubscribe> u unsubscribe to current mailbox (IMAP Only)
- <toggle-subscribed> T toggle view all/subscribed mailboxes (IMAP
- Only)
-
- 5.10. pgp
-
- Table 7.13. Reference: Default PGP Menu Function Bindings
-
- Function Default Key Description
- <view-name> % view the key's user id
- <verify-key> c verify a PGP public key
-
- 5.11. editor
-
- Table 7.14. Reference: Default Editor Function Bindings
-
- Function Default Key Description
- <backspace> BackSpace delete the char in front of the cursor
- <backward-char> C-B move the cursor one character to the left
- <backward-word> E-b move the cursor to the previous word
- <bol> C-A jump to the beginning of the line
- <buffy-cycle> Space cycle among incoming mailboxes
- <capitalize-word> E-c uppercase the first character in the word
- <complete> Tab complete filename or alias
- <complete-query> C-T complete address with query
- <delete-char> C-D delete the char under the cursor
- <downcase-word> E-l lowercase all characters in current word
- <eol> C-E jump to the end of the line
- <forward-char> C-F move the cursor one character to the right
- <forward-word> E-f move the cursor to the next word
- <history-down> scroll down through the history list
- <history-up> scroll up through the history list
- <kill-eol> C-K delete chars from cursor to end of line
- <kill-eow> E-d delete chars from cursor to end of word
- <kill-line> C-U delete all chars on the line
- <kill-word> C-W delete the word in front of the cursor
- <quote-char> C-V quote the next typed key
- <transpose-chars> transpose character under cursor with
- previous
- <upcase-word> E-u uppercase all characters in current word
-
- 5.12. sidebar
-
- Table 7.15. Referene: Default Sidebar Function Bindings
-
- Key Function Description
- <sidebar-scroll-up> Scrolls the mailbox list up 1 page
- <sidebar-scroll-down> Scrolls the mailbox list down 1 page
- <sidebar-next> Highlights the next mailbox
- <sidebar-next-new> Highlights the next mailbox with new mail
- <sidebar-previous> Highlights the previous mailbox
- <sidebar-open> Opens the currently highlighted mailbox
-
-Appendix A. Acknowledgments
-
- Kari Hurtta <kari.hurtta@fmi.fi> co-developed the original MIME >parsing
- code back in the ELM-ME days.
-
- The following people have been very helpful to the development of Mutt
- (sorted by surnames):
-
- o Vikas Agnihotri <vikasa@writeme.com>
- o Francois Berjon < Francois.Berjon@aar.alcatel-alsthom.fr>
- o Aric Blumer <aric@fore.com>
- o John Capo <jc@irbs.com>
- o David Champion <dgc@uchicago.edu>
- o Brendan Cully <brendan@kublai.com>
- o Liviu Daia <daia@stoilow.imar.ro>
- o Thomas E. Dickey <dickey@herndon4.his.com>
- o David DeSimone <fox@convex.hp.com>
- o Nickolay N. Dudorov <nnd@wint.itfs.nsk.su>
- o Ruslan Ermilov <ru@freebsd.org>
- o Edmund Grimley Evans <edmundo@rano.org>
- o Michael Finken <finken@conware.de>
- o Sven Guckes <guckes@math.fu-berlin.de>
- o Lars Hecking <lhecking@nmrc.ie>
- o Mark Holloman <holloman@nando.net>
- o Andreas Holzmann <holzmann@fmi.uni-passau.de>
- o Marco d'Itri <md@linux.it>
- o Björn Jacke <bjacke@suse.com>
- o Byrial Jensen <byrial@image.dk>
- o David Jeske <jeske@igcom.net>
- o Christophe Kalt <kalt@hugo.int-evry.fr>
- o Tommi Komulainen <Tommi.Komulainen@iki.fi>
- o Felix von Leitner (a.k.a ``Fefe'') < leitner@math.fu-berlin.de >
- o Brandon Long <blong@fiction.net>
- o Jimmy Mäkeä <jmy@flashback.net>
- o Lars Marowsky-Bree <lmb@pointer.in-minden.de>
- o Thomas ``Mike'' Michlmayr <mike@cosy.sbg.ac.at>
- o Andrew W. Nosenko <awn@bcs.zp.ua>
- o David O'Brien <obrien@Nuxi.cs.ucdavis.edu>
- o Clint Olsen <olsenc@ichips.intel.com>
- o Park Myeong Seok <pms@romance.kaist.ac.kr>
- o Thomas Parmelan <tom@ankh.fr.eu.org>
- o Ollivier Robert <roberto@keltia.freenix.fr>
- o Thomas Roessler <roessler@does-not-exist.org>
- o Roland Rosenfeld <roland@spinnaker.de>
- o TAKIZAWA Takashi <taki@luna.email.ne.jp>
- o Allain Thivillon <Allain.Thivillon@alma.fr>
- o Gero Treuner <gero@70t.de>
- o Vsevolod Volkov <vvv@lucky.net>
- o Ken Weinert <kenw@ihs.com>
-
- Mutt-ng is developed by the following people:
-
- o Andreas Krennmair <ak@synflood.at>
- o Nico Golde <nico@ngolde.de>
- o Rocco Rutte <pdmef@cs.tu-berlin.de>
-
- The following people have been very helpful to the development of Mutt-ng
- (sorted by surnames):
-
- o Christian Gall <cg@cgall.de>
- o Iain Lea <iain@bricbrac.de>
- o Andreas Kneib <akneib@gmx.net>
- o Felix Meinhold <felix.meinhold@gmx.net>
- o Carsten Schoelzki <cjs@weisshuhn.de>
- o Elimar Riesebieter <riesebie@lxtec.de>
-
-Appendix B. Hacking Documentation
-
- This manual is written in XML and transformed via a XSLT stylesheet into
- valid DocBook/XML and/or LaTeX to be again transformed via a XSLT
- stylesheet into the final formats.
-
- This two pass processing is required to keep the file size low and to
- sanitize use, i.e. drastically lower the typing overhead.
-
- To achieve the latter, the sources come with a file called
- muttng-manual.xsl introducing the muttng-doc namespace which offers the
- following tags to be used (note: this is far from being complete, any help
- towards consistency is highly appreciated).
-
- <muttng-doc:man name="" [sect=""]/>
-
- References to manual pages. If the sect parameter is omitted,
- it'll be 1 for the commands section. There's no auto-indexing yet.
-
- <muttng-doc:envvar name=""/>
-
- References to environment variables. The name parameter must
- contain upper-case letters only without the dollar sign as it'll
- be added automatically. Auto-indexing is done.
-
- <muttng-doc:hook name=""/>
-
- References to hooks. The string -hook will be added automatically
- to the value given in the name parameter. All entries will be
- auto-indexed.
-
- <muttng-doc:pattern name="" [full="1"]/>
-
- References to patterns. The name parameter must only contain the
- letter/symbol for the pattern as the tilde symbol/equal sign will
- be added automatically. Auto-indexing is done. If the full
- parameter is given the equal sign as well as tilde will be printed
- for a fully complete reference.
-
- <muttng-doc:key [mod="C|E"]>key</muttng-doc:key>
-
- Referencing a key.. Because it's somewhat untrivial to always get
- the right escaping for LaTeX, there's a tag for it. The optional
- modifiers C or E stand for Control and Escape respectively. To
- still allow escaping, the actual key sequences must be given
- within the tag.
-
- <muttng-doc:funcdef name=""/>
-
- Defining a command.. It's used to define a command with the name
- given in the name parameter. The default key binding must be given
- via <muttng-doc:key/> (see above). The string will be
- automatically enclosed in <>. Auto-indexing is done. Also an
- anchor with id func-[name] will be added with [name] being the
- value of the name parameter.
-
- <muttng-doc:funcref name=""/>