-msgid "Warning: At least one certification key has expired\n"
-msgstr "伺服器的驗証已過期"
-
-#: crypt-gpgme.c:966
-msgid "Warning: The signature expired at: "
-msgstr ""
-
-#: crypt-gpgme.c:972
-msgid "Can't verify due to a missing key or certificate\n"
-msgstr ""
-
-#: crypt-gpgme.c:976
-#, fuzzy
-msgid "The CRL is not available\n"
-msgstr "沒有 SSL 功能"
-
-#: crypt-gpgme.c:981
-msgid "Available CRL is too old\n"
-msgstr ""
-
-#: crypt-gpgme.c:986
-msgid "A policy requirement was not met\n"
-msgstr ""
-
-#: crypt-gpgme.c:994
-msgid "A system error occurred"
-msgstr ""
-
-#: crypt-gpgme.c:1027 crypt-gpgme.c:2824
-#, fuzzy
-msgid "Fingerprint: "
-msgstr "指模:%s"
-
-#: crypt-gpgme.c:1082
-msgid ""
-"WARNING: We have NO indication whether the key belongs to the person named "
-"as shown above\n"
-msgstr ""
-
-#: crypt-gpgme.c:1088
-msgid "WARNING: The key does NOT BELONG to the person named as shown above\n"
-msgstr ""
-
-#: crypt-gpgme.c:1092
-msgid ""
-"WARNING: It is NOT certain that the key belongs to the person named as shown "
-"above\n"
-msgstr ""
-
-#: crypt-gpgme.c:1160
-msgid "Error getting key information: "
-msgstr ""
-
-#: crypt-gpgme.c:1166 crypt-gpgme.c:1196
-msgid "Good signature from: "
-msgstr ""
-
-#: crypt-gpgme.c:1175
-msgid " aka: "
-msgstr ""
-
-#: crypt-gpgme.c:1179 crypt-gpgme.c:1199
-msgid " created: "
-msgstr ""
-
-#: crypt-gpgme.c:1187
-msgid "*BAD* signature claimed to be from: "
-msgstr ""
-
-#: crypt-gpgme.c:1209
-#, fuzzy
-msgid "Error checking signature"
-msgstr "寄信途中發生錯誤。"
-
-#: crypt-gpgme.c:1252 crypt-gpgme.c:1436 crypt-gpgme.c:1900
-msgid "[-- Begin signature information --]\n"
-msgstr ""
-
-#: crypt-gpgme.c:1260
-#, fuzzy, c-format
-msgid "Error: verification failed: %s\n"
-msgstr "指令行有錯:%s\n"
-
-#: crypt-gpgme.c:1317 crypt-gpgme.c:1447 crypt-gpgme.c:1913
-#, fuzzy
-msgid ""
-"[-- End signature information --]\n"
-"\n"
-msgstr ""
-"\n"
-"[-- 簽署的資料結束 --]\n"
-
-#: crypt-gpgme.c:1406
-#, fuzzy, c-format
-msgid ""
-"[-- Error: decryption failed: %s --]\n"
-"\n"
-msgstr "[-- 錯誤:突發的檔尾! --]\n"
-
-#: crypt-gpgme.c:1877
-#, c-format
-msgid "Error: decryption/verification failed: %s\n"
-msgstr ""
-
-#: crypt-gpgme.c:1920
-msgid "Error: copy data failed\n"
-msgstr ""
-
-#: crypt-gpgme.c:1938 pgp.c:408
-msgid ""
-"[-- BEGIN PGP MESSAGE --]\n"
-"\n"
-msgstr ""
-"[-- PGP 信件開始 --]\n"
-"\n"
-
-#: crypt-gpgme.c:1940 pgp.c:410
-msgid "[-- BEGIN PGP PUBLIC KEY BLOCK --]\n"
-msgstr "[-- PGP 公共鑰匙區段開始 --]\n"
-
-#: crypt-gpgme.c:1942 pgp.c:412
-msgid ""
-"[-- BEGIN PGP SIGNED MESSAGE --]\n"
-"\n"
-msgstr ""
-"[-- PGP 簽名的信件開始 --]\n"
-"\n"
-
-#: crypt-gpgme.c:1965 pgp.c:435
-#, fuzzy
-msgid "[-- END PGP MESSAGE --]\n"
-msgstr ""
-"\n"
-"[-- PGP 信件結束 --]\n"
-
-#: crypt-gpgme.c:1967 pgp.c:442
-msgid "[-- END PGP PUBLIC KEY BLOCK --]\n"
-msgstr "[-- PGP 公共鑰匙區段結束 --]\n"
-
-#: crypt-gpgme.c:1969 pgp.c:444
-#, fuzzy
-msgid "[-- END PGP SIGNED MESSAGE --]\n"
-msgstr ""
-"\n"
-"[-- PGP 簽名的信件結束 --]\n"
-
-#: crypt-gpgme.c:1987 pgp.c:472
-msgid ""
-"[-- Error: could not find beginning of PGP message! --]\n"
-"\n"
-msgstr ""
-"[-- 錯誤:找不到 PGP 信件的開頭! --]\n"
-"\n"
-
-#: crypt-gpgme.c:2016 pgp.c:878
-msgid ""
-"[-- Error: malformed PGP/MIME message! --]\n"
-"\n"
-msgstr ""
-"[-- 錯誤:不正確的 PGP/MIME 信件! --]\n"
-"\n"
-
-#: crypt-gpgme.c:2027 crypt-gpgme.c:2090 pgp.c:892
-msgid "[-- Error: could not create temporary file! --]\n"
-msgstr "[-- 錯誤:無法建立暫存檔! --]\n"
-
-#: crypt-gpgme.c:2039
-#, fuzzy
-msgid ""
-"[-- The following data is PGP/MIME signed and encrypted --]\n"
-"\n"
-msgstr ""
-"[-- 下面是 PGP/MIME 加密資料 --]\n"
-"\n"
-
-#: crypt-gpgme.c:2040 pgp.c:903
-msgid ""
-"[-- The following data is PGP/MIME encrypted --]\n"
-"\n"
-msgstr ""
-"[-- 下面是 PGP/MIME 加密資料 --]\n"
-"\n"
-
-#: crypt-gpgme.c:2062
-#, fuzzy
-msgid "[-- End of PGP/MIME signed and encrypted data --]\n"
-msgstr ""
-"\n"
-"[-- PGP/MIME 加密資料結束 --]\n"
-
-#: crypt-gpgme.c:2063 pgp.c:923
-#, fuzzy
-msgid "[-- End of PGP/MIME encrypted data --]\n"
-msgstr ""
-"\n"
-"[-- PGP/MIME 加密資料結束 --]\n"
-
-#: crypt-gpgme.c:2101
-#, fuzzy
-msgid ""
-"[-- The following data is S/MIME signed --]\n"
-"\n"
-msgstr ""
-"[-- 以下的資料已被簽署 --]\n"
-"\n"
-
-#: crypt-gpgme.c:2102
-#, fuzzy
-msgid ""
-"[-- The following data is S/MIME encrypted --]\n"
-"\n"
-msgstr ""
-"[-- 下面是 PGP/MIME 加密資料 --]\n"
-"\n"
-
-#: crypt-gpgme.c:2129
-#, fuzzy
-msgid "[-- End of S/MIME signed data --]\n"
-msgstr ""
-"\n"
-"[-- 簽署的資料結束 --]\n"
-
-#: crypt-gpgme.c:2130
-#, fuzzy
-msgid "[-- End of S/MIME encrypted data --]\n"
-msgstr ""
-"\n"
-"[-- PGP/MIME 加密資料結束 --]\n"
-
-#: crypt-gpgme.c:2677
-msgid "[Can't display this user ID (unknown encoding)]"
-msgstr ""
-
-#: crypt-gpgme.c:2679
-msgid "[Can't display this user ID (invalid encoding)]"
-msgstr ""
-
-#: crypt-gpgme.c:2684
-msgid "[Can't display this user ID (invalid DN)]"
-msgstr ""
-
-#: crypt-gpgme.c:2756
-msgid " aka ......: "
-msgstr ""
-
-#: crypt-gpgme.c:2756
-msgid "Name ......: "
-msgstr ""
-
-#: crypt-gpgme.c:2759 crypt-gpgme.c:2880
-#, fuzzy
-msgid "[Invalid]"
-msgstr "無效的月份:%s"
-
-#: crypt-gpgme.c:2778 crypt-gpgme.c:2901
-#, fuzzy, c-format
-msgid "Valid From : %s\n"
-msgstr "無效的月份:%s"
-
-#: crypt-gpgme.c:2790 crypt-gpgme.c:2913
-#, fuzzy, c-format
-msgid "Valid To ..: %s\n"
-msgstr "無效的月份:%s"
-
-#: crypt-gpgme.c:2803 crypt-gpgme.c:2926
-#, c-format
-msgid "Key Type ..: %s, %lu bit %s\n"
-msgstr ""
-
-#: crypt-gpgme.c:2805 crypt-gpgme.c:2928
-#, c-format
-msgid "Key Usage .: "
-msgstr ""
-
-#: crypt-gpgme.c:2809 crypt-gpgme.c:2932
-#, fuzzy
-msgid "encryption"
-msgstr "加密"
-
-#: crypt-gpgme.c:2810 crypt-gpgme.c:2814 crypt-gpgme.c:2818 crypt-gpgme.c:2933
-#: crypt-gpgme.c:2937 crypt-gpgme.c:2941
-msgid ", "
-msgstr ""
-
-#: crypt-gpgme.c:2813 crypt-gpgme.c:2936
-msgid "signing"
-msgstr ""
-
-#: crypt-gpgme.c:2817 crypt-gpgme.c:2940
-msgid "certification"
-msgstr ""
-
-#: crypt-gpgme.c:2851
-#, c-format
-msgid "Serial-No .: 0x%s\n"
-msgstr ""
-
-#: crypt-gpgme.c:2857
-#, c-format
-msgid "Issued By .: "
-msgstr ""
-
-#: crypt-gpgme.c:2873
-#, fuzzy, c-format
-msgid "Subkey ....: 0x%s"
-msgstr "鑰匙 ID:0x%s"
-
-#: crypt-gpgme.c:2876
-msgid "[Revoked]"
-msgstr ""
-
-#: crypt-gpgme.c:2884
-#, fuzzy
-msgid "[Expired]"
-msgstr "離開 "
-
-#: crypt-gpgme.c:2888
-msgid "[Disabled]"
-msgstr ""
-
-#: crypt-gpgme.c:2965 pgpkey.c:532 pgpkey.c:711
-msgid "Can't create temporary file"
-msgstr "無法建立暫存檔"
-
-#: crypt-gpgme.c:2969
-#, fuzzy
-msgid "Collecting data..."
-msgstr "正連接到 %s…"
-
-#: crypt-gpgme.c:2992
-#, fuzzy, c-format
-msgid "Error finding issuer key: %s\n"
-msgstr "連線到 %s 時失敗"
-
-#: crypt-gpgme.c:3000
-msgid "Error: certification chain to long - stopping here\n"
-msgstr ""
-
-#: crypt-gpgme.c:3010 pgpkey.c:557
-#, c-format
-msgid "Key ID: 0x%s"
-msgstr "鑰匙 ID:0x%s"
-
-#: crypt-gpgme.c:3086
-#, fuzzy, c-format
-msgid "gpgme_new failed: %s"
-msgstr "登入失敗: %s"
-
-#: crypt-gpgme.c:3121 crypt-gpgme.c:3177
-#, c-format
-msgid "gpgme_op_keylist_start failed: %s"
-msgstr ""
-
-#: crypt-gpgme.c:3166 crypt-gpgme.c:3202
-#, c-format
-msgid "gpgme_op_keylist_next failed: %s"
-msgstr ""
-
-#: crypt-gpgme.c:3268
-#, fuzzy
-msgid "All matching keys are marked expired/revoked."
-msgstr "所有符合的鑰匙經已過期或取消。"
-
-#: crypt-gpgme.c:3297 mutt_ssl.c:638 mutt_ssl_gnutls.c:746 pgpkey.c:489
-#: smime.c:423
-msgid "Exit "
-msgstr "離開 "
-
-#: crypt-gpgme.c:3299 pgpkey.c:491 smime.c:425
-msgid "Select "
-msgstr "選擇 "
-
-#: crypt-gpgme.c:3302 pgpkey.c:494
-msgid "Check key "
-msgstr "檢查鑰匙 "
-
-#: crypt-gpgme.c:3319
-#, fuzzy
-msgid "PGP and S/MIME keys matching"
-msgstr "PGP 鑰匙符合 <%s>。"
-
-#: crypt-gpgme.c:3321
-#, fuzzy
-msgid "PGP keys matching"
-msgstr "PGP 鑰匙符合 <%s>。"
-
-#: crypt-gpgme.c:3323
-#, fuzzy
-msgid "S/MIME keys matching"
-msgstr "PGP 鑰匙符合 <%s>。"
-
-#: crypt-gpgme.c:3325
-#, fuzzy
-msgid "keys matching"
-msgstr "PGP 鑰匙符合 <%s>。"
-
-#: crypt-gpgme.c:3328
-#, fuzzy, c-format
-msgid "%s <%s>."
-msgstr "%s 【%s】\n"
-
-#: crypt-gpgme.c:3330
-#, fuzzy, c-format
-msgid "%s \"%s\"."
-msgstr "%s 【%s】\n"
-
-#: crypt-gpgme.c:3353 pgpkey.c:577
-msgid "This key can't be used: expired/disabled/revoked."
-msgstr "這個鑰匙不能使用:過期/停用/已取消。"
-
-#: crypt-gpgme.c:3366 pgpkey.c:589
-#, fuzzy
-msgid "ID is expired/disabled/revoked."
-msgstr "這個 ID 已過期/停用/取消。"
-
-#: crypt-gpgme.c:3383 pgpkey.c:593
-msgid "ID has undefined validity."
-msgstr ""
-
-#: crypt-gpgme.c:3386 pgpkey.c:596
-#, fuzzy
-msgid "ID is not valid."
-msgstr "這個 ID 不可接受。"
-
-#: crypt-gpgme.c:3389 pgpkey.c:599
-#, fuzzy
-msgid "ID is only marginally valid."
-msgstr "此 ID 只是勉強可接受。"
-
-#: crypt-gpgme.c:3397 pgpkey.c:604
-#, c-format
-msgid "%s Do you really want to use the key?"
-msgstr "%s 您真的要使用這個鑰匙?"
-
-#: crypt-gpgme.c:3452 crypt-gpgme.c:3554 pgpkey.c:811 pgpkey.c:916
-#, c-format
-msgid "Looking for keys matching \"%s\"..."
-msgstr "正找尋匹配 \"%s\" 的鑰匙…"
-
-#: crypt-gpgme.c:3710 pgp.c:1126
-#, c-format
-msgid "Use keyID = \"%s\" for %s?"
-msgstr "要為 %2$s 使用鑰匙 ID = \"%1$s\"?"
-
-#: crypt-gpgme.c:3741 pgp.c:1159 smime.c:645 smime.c:765
-#, c-format
-msgid "Enter keyID for %s: "
-msgstr "請輸入 %s 的鑰匙 ID:"
-
-#: crypt-gpgme.c:3831
-#, fuzzy
-msgid "S/MIME (e)ncrypt, (s)ign, sign (a)s, (b)oth, (p)gp or (c)lear?"
-msgstr "(1)加密, (2)簽名, (3)用別的身份簽, (4)兩者皆要, 或 (5)放棄?"
-
-#: crypt-gpgme.c:3832
-#, fuzzy
-msgid "esabpfc"
-msgstr "1234i5"
-
-#: crypt-gpgme.c:3836
-#, fuzzy
-msgid "PGP (e)ncrypt, (s)ign, sign (a)s, (b)oth, s/(m)ime or (c)lear?"
-msgstr "(1)加密, (2)簽名, (3)用別的身份簽, (4)兩者皆要, 或 (5)放棄?"
-
-#: crypt-gpgme.c:3837
-#, fuzzy
-msgid "esabmfc"
-msgstr "1234i5"
-
-#: crypt-gpgme.c:3852 pgp.c:1519 smime.c:1961
-msgid "Sign as: "
-msgstr "簽名的身份是:"
-
-# Don't translate this!!
-#: curs_lib.c:176
-msgid "yes"
-msgstr ""
-
-# Don't translate this!!
-#: curs_lib.c:177
-msgid "no"
-msgstr ""
-
-#: curs_lib.c:266
-#, fuzzy
-msgid "Exit Mutt-ng?"
-msgstr "離開 Mutt?"
-
-#: curs_lib.c:387 mutt_socket.c:491 mutt_ssl.c:314
-msgid "unknown error"
-msgstr "不明的錯誤"
-
-#: curs_lib.c:407
-msgid "Press any key to continue..."
-msgstr "按下任何鍵繼續…"
-
-#: curs_lib.c:449
-msgid " ('?' for list): "
-msgstr " (用 '?' 顯示列表):"
-
-#: curs_main.c:62 curs_main.c:626 curs_main.c:654 imap/command.c:178
-msgid "No mailbox is open."
-msgstr "沒有已開啟信箱。"
-
-#: curs_main.c:63 curs_main.c:2195
-msgid "There are no messages."
-msgstr "沒有信件。"
-
-#: curs_main.c:64 mx.c:1018 pager.c:66 recvattach.c:43
-msgid "Mailbox is read-only."
-msgstr "信箱是唯讀的。"
-
-#: curs_main.c:66 pager.c:68 recvattach.c:894
-msgid "Function not permitted in attach-message mode."
-msgstr "功能在 attach-message 模式下不被支援。"
-
-#: curs_main.c:67
-msgid "No visible messages."
-msgstr "沒有要被顯示的信件。"
-
-#: curs_main.c:248
-msgid "Cannot toggle write on a readonly mailbox!"
-msgstr "無法寫入到一個唯讀的信箱!"
-
-#: curs_main.c:255
-msgid "Changes to folder will be written on folder exit."
-msgstr "在離開之後將會把改變寫入資料夾。"
-
-#: curs_main.c:259
-msgid "Changes to folder will not be written."
-msgstr "將不會把改變寫入資料夾。"
-
-#: curs_main.c:380 curs_main.c:393
-msgid "Quit"
-msgstr "離開"
-
-#: curs_main.c:383 curs_main.c:396 recvattach.c:57
-msgid "Save"
-msgstr "儲存"
-
-#: curs_main.c:384 query.c:44
-msgid "Mail"
-msgstr "信件"
-
-#: curs_main.c:385 pager.c:1381
-msgid "Reply"
-msgstr "回覆"
-
-#: curs_main.c:386
-msgid "Group"
-msgstr "群組"
-
-#: curs_main.c:397 pager.c:1388
-msgid "Post"
-msgstr ""
-
-#: curs_main.c:398 pager.c:1389
-#, fuzzy
-msgid "Followup"
-msgstr "以後的回覆都寄至 %s%s?"
-
-#: curs_main.c:497
-msgid "Mailbox was externally modified. Flags may be wrong."
-msgstr "信箱已被其他途徑改變過。旗標可能有錯誤。"
-
-#: curs_main.c:501
-msgid "New mail in this mailbox."
-msgstr "這個信箱中有新信件。"
-
-#: curs_main.c:507
-msgid "Mailbox was externally modified."
-msgstr "信箱已被其他途徑更改過。"
-
-#: curs_main.c:632
-msgid "No tagged messages."
-msgstr "沒有標記了的信件。"
-
-#: curs_main.c:667 menu.c:858
-#, fuzzy
-msgid "Nothing to do."
-msgstr "正連接到 %s…"
-
-#: curs_main.c:758
-#, fuzzy
-msgid "Enter Message-ID: "
-msgstr "請輸入 %s 的鑰匙 ID:"
-
-#: curs_main.c:766
-msgid "Article has no parent reference!"
-msgstr ""
-
-#: curs_main.c:786
-#, fuzzy
-msgid "Message not visible in limited view."
-msgstr "在限制閱覽模式下無法顯示主信件。"
-
-#: curs_main.c:796
-#, c-format
-msgid "Article %s not found on server"
-msgstr ""
-
-#: curs_main.c:809
-msgid "No Message-ID. Unable to perform operation"
-msgstr ""
-
-#: curs_main.c:829
-#, fuzzy
-msgid "Check for children of message..."
-msgstr "看看有沒有新信件…"
-
-#: curs_main.c:860
-msgid "Jump to message: "
-msgstr "跳到信件:"
-
-#: curs_main.c:865
-msgid "Argument must be a message number."
-msgstr "需要一個信件編號的參數。"
-
-#: curs_main.c:893
-msgid "That message is not visible."
-msgstr "這封信件無法顯示。"
-
-#: curs_main.c:896
-msgid "Invalid message number."
-msgstr "無效的信件編號。"
-
-#: curs_main.c:910 curs_main.c:1918 curs_main.c:1958 pager.c:2137 pager.c:2156
-#, fuzzy
-msgid "Deletion"
-msgstr "刪除"
-
-#: curs_main.c:913
-msgid "Delete messages matching: "
-msgstr "刪除符合這樣式的信件:"
-
-#: curs_main.c:935
-msgid "No limit pattern is in effect."
-msgstr "沒有限制樣式是有效的。"
-
-#: curs_main.c:941
-#, c-format
-msgid "Limit: %s"
-msgstr "限制: %s"
-
-#: curs_main.c:972
-msgid "Limit to messages matching: "
-msgstr "限制只符合這樣式的信件:"
-
-#: curs_main.c:993
-msgid "To view all messages, limit to \"all\"."
-msgstr ""
-
-#: curs_main.c:1004
-#, fuzzy
-msgid "Quit Mutt-ng?"
-msgstr "離開 Mutt?"
-
-#: curs_main.c:1080
-msgid "Tag messages matching: "
-msgstr "標記信件的條件:"
-
-#: curs_main.c:1090 curs_main.c:2271 curs_main.c:2298 pager.c:2504
-#: pager.c:2520
-#, fuzzy
-msgid "Undeletion"
-msgstr "反刪除"
-
-#: curs_main.c:1092
-msgid "Undelete messages matching: "
-msgstr "反刪除信件的條件:"
-
-#: curs_main.c:1101
-msgid "Untag messages matching: "
-msgstr "反標記信件的條件:"
-
-#: curs_main.c:1184
-msgid "Open mailbox in read-only mode"
-msgstr "用唯讀模式開啟信箱"
-
-#: curs_main.c:1186
-msgid "Open mailbox"
-msgstr "開啟信箱"
-
-#: curs_main.c:1196
-#, fuzzy
-msgid "Open newsgroup in read-only mode"
-msgstr "用唯讀模式開啟信箱"
-
-#: curs_main.c:1198
-msgid "Open newsgroup"
-msgstr ""
-
-#: curs_main.c:1234 mx.c:415 mx.c:555
-#, c-format
-msgid "%s is not a mailbox."
-msgstr "%s 不是信箱。"
-
-#: curs_main.c:1338
-#, fuzzy
-msgid "Exit Mutt-ng without saving?"
-msgstr "不儲存便離開 Mutt 嗎?"
-
-#: curs_main.c:1370 curs_main.c:1400 curs_main.c:1808 curs_main.c:1838
-#: flags.c:294 thread.c:932 thread.c:979 thread.c:1034
-msgid "Threading is not enabled."
-msgstr "序列功能尚未啟動。"
-
-#: curs_main.c:1382
-msgid "Thread broken"
-msgstr ""
-
-#: curs_main.c:1403
-msgid "No Message-ID: header available to link thread"
-msgstr ""
-
-#: curs_main.c:1406
-#, fuzzy
-msgid "First, please tag a message to be linked here"
-msgstr "儲存信件以便稍後寄出"
-
-#: curs_main.c:1417
-msgid "Threads linked"
-msgstr ""
-
-#: curs_main.c:1420
-msgid "No thread linked"
-msgstr ""
-
-#: curs_main.c:1437 curs_main.c:1460
-msgid "You are on the last message."
-msgstr "您已經在最後一封信了。"
-
-#: curs_main.c:1444 curs_main.c:1485
-msgid "No undeleted messages."
-msgstr "沒有要反刪除的信件。"
-
-#: curs_main.c:1478 curs_main.c:1501
-msgid "You are on the first message."
-msgstr "您已經在第一封信了。"
-
-#: curs_main.c:1574 pattern.c:1369
-msgid "Search wrapped to top."
-msgstr "搜尋至開頭。"
-
-#: curs_main.c:1582 pattern.c:1380
-msgid "Search wrapped to bottom."
-msgstr "搜尋至結尾。"
-
-#: curs_main.c:1627
-msgid "No new messages"
-msgstr "沒有新信件"
-
-#: curs_main.c:1628
-msgid "No unread messages"
-msgstr "沒有尚未讀取的信件"
-
-#: curs_main.c:1629
-msgid " in this limited view"
-msgstr " 在這限定的瀏覽中"
-
-#: curs_main.c:1645 pager.c:2268
-msgid "Flagging"
-msgstr ""
-
-#: curs_main.c:1678 pager.c:2485
-msgid "Toggling"
-msgstr ""
-
-#: curs_main.c:1749
-msgid "No more threads."
-msgstr "沒有更多的序列"
-
-#: curs_main.c:1752
-msgid "You are on the first thread."
-msgstr "您已經在第一個序列上。"
-
-#: curs_main.c:1824
-msgid "Thread contains unread messages."
-msgstr "序列中有尚未讀取的信件。"
-
-#: curs_main.c:2009
-msgid "Editing"
-msgstr ""
-
-#: curs_main.c:2145
-msgid "Marking as read"
-msgstr ""
-
-#: curs_main.c:2201 pager.c:2347 recvattach.c:1205
-msgid "Reply by mail as poster prefers?"
-msgstr ""
-
-#: curs_main.c:2207 pager.c:2310 pager.c:2324 pager.c:2352
-msgid "Posting to this group not allowed, may be moderated. Continue?"
-msgstr ""
-
-#: edit.c:39
-msgid ""
-"~~\t\tinsert a line begining with a single ~\n"
-"~b users\tadd users to the Bcc: field\n"
-"~c users\tadd users to the Cc: field\n"
-"~f messages\tinclude messages\n"
-"~F messages\tsame as ~f, except also include headers\n"
-"~h\t\tedit the message header\n"
-"~m messages\tinclude and quote messages\n"
-"~M messages\tsame as ~m, except include headers\n"
-"~p\t\tprint the message\n"
-"~q\t\twrite file and quit editor\n"
-"~r file\t\tread a file into the editor\n"
-"~t users\tadd users to the To: field\n"
-"~u\t\trecall the previous line\n"
-"~v\t\tedit message with the $visual editor\n"
-"~w file\t\twrite message to file\n"
-"~x\t\tabort changes and quit editor\n"
-"~?\t\tthis message\n"
-".\t\ton a line by itself ends input\n"
-msgstr ""
-"~~\t\t插入以 ~ 符號開頭的一行\n"
-"~b 戶口\t新增戶口到 Bcc: 欄位\n"
-"~c 戶口\t新增戶口到 Cc: 欄位\n"
-"~f 信件\t包含信件\n"
-"~F 訊息\t類似 ~f, 不包括信件標頭\n"
-"~h\t\t編輯信件的標頭\n"
-"~m 訊息\t包括引言\n"
-"~M 訊息\t類似 ~m, 不包括信件標頭\n"
-"~p\t\t列印這封信件\n"
-"~q\t\t存檔並且離開編輯器\n"
-"~r 檔案\t\t將檔案讀入編輯器\n"
-"~t 戶口\t新增戶口到 To: 欄位\n"
-"~u\t\t喚回之前那一行\n"
-"~v\t\t使用 $visual 編輯器編輯訊息\n"
-"~w 檔案\t\t將訊息寫入檔案\n"
-"~x\t\t停止修改並離開編輯器\n"
-"~?\t\t這訊息\n"
-".\t\t如果是一行裏的唯一字符,則代表結束輸入\n"
-
-#: edit.c:178
-#, c-format
-msgid "%d: invalid message number.\n"
-msgstr "%d:無效的信件號碼。\n"
-
-#: edit.c:308
-msgid "(End message with a . on a line by itself)\n"
-msgstr "(在一行裏輸入一個 . 符號來結束信件)\n"
-
-#: edit.c:362
-msgid "No mailbox.\n"
-msgstr "沒有信箱。\n"
-
-#: edit.c:366
-msgid "Message contains:\n"
-msgstr "信件包含:\n"
-
-#: edit.c:370 edit.c:424
-msgid "(continue)\n"
-msgstr "(繼續)\n"
-
-#: edit.c:382
-msgid "missing filename.\n"
-msgstr "遺失了檔名。\n"
-
-#: edit.c:401
-msgid "No lines in message.\n"
-msgstr "文章中沒有文字。\n"
-
-#: edit.c:417
-#, c-format
-msgid "Bad IDN in %s: '%s'\n"
-msgstr ""
-
-#: edit.c:435
-#, c-format
-msgid "%s: unknown editor command (~? for help)\n"
-msgstr "%s:不明的編輯器指令(~? 求助)\n"
-
-#: editmsg.c:69
-#, c-format
-msgid "could not create temporary folder: %s"
-msgstr "無法建立暫存檔:%s"
-
-#: editmsg.c:81
-#, c-format
-msgid "could not write temporary mail folder: %s"
-msgstr "無法寫入暫存檔:%s"
-
-#: editmsg.c:100
-#, fuzzy, c-format
-msgid "could not truncate temporary mail folder: %s"
-msgstr "無法寫入暫存檔:%s"
-
-#: editmsg.c:113
-msgid "Message file is empty!"
-msgstr "信件檔案是空的!"
-
-#: editmsg.c:119
-msgid "Message not modified!"
-msgstr "沒有改動信件!"
-
-#: editmsg.c:126
-#, c-format
-msgid "Can't open message file: %s"
-msgstr "無法開啟信件檔案:%s"
-
-#: editmsg.c:132 editmsg.c:160
-#, c-format
-msgid "Can't append to folder: %s"
-msgstr "無法把資料加到檔案夾:%s"
-
-#: editmsg.c:192
-#, c-format
-msgid "Error. Preserving temporary file: %s"
-msgstr "發生錯誤,保留暫存檔:%s"
-
-#: flags.c:336
-msgid "Set flag"
-msgstr "設定旗標"
-
-#: flags.c:336
-msgid "Clear flag"
-msgstr "清除旗標"
-
-#: handler.c:925
-msgid "[-- Error: Could not display any parts of Multipart/Alternative! --]\n"
-msgstr "[-- 錯誤: 無法顯示 Multipart/Alternative! --]\n"
-
-#: handler.c:1039
-#, c-format
-msgid "[-- Attachment #%d"
-msgstr "[-- 附件 #%d"
-
-#: handler.c:1050
-#, c-format
-msgid "[-- Type: %s/%s, Encoding: %s, Size: %s --]\n"
-msgstr "[-- 種類:%s%s,編碼:%s,大小:%s --]\n"
-
-#: handler.c:1114
-#, c-format
-msgid "[-- Autoview using %s --]\n"
-msgstr "[-- 使用 %s 自動顯示 --]\n"
-
-#: handler.c:1115
-#, c-format
-msgid "Invoking autoview command: %s"
-msgstr "執行自動顯示指令:%s"
-
-#: handler.c:1143
-#, c-format
-msgid "[-- Can't run %s. --]\n"
-msgstr "[-- 不能執行 %s 。 --]\n"
-
-#: handler.c:1158 handler.c:1175
-#, c-format
-msgid "[-- Autoview stderr of %s --]\n"
-msgstr "[-- 自動顯示 %s 的 stderr 內容 --]\n"
-
-#: handler.c:1210
-msgid "[-- Error: message/external-body has no access-type parameter --]\n"
-msgstr ""
-"[-- 錯誤:message/external-body 沒有存取類型 (access-type) 的參數 --]\n"
-
-#: handler.c:1227
-#, c-format
-msgid "[-- This %s/%s attachment "
-msgstr "[-- 這個 %s/%s 附件 "
-
-#: handler.c:1233
-#, c-format
-msgid "(size %s bytes) "
-msgstr "(%s 個位元組) "
-
-#: handler.c:1235
-msgid "has been deleted --]\n"
-msgstr "已經被刪除了 --]\n"
-
-#: handler.c:1239
-#, c-format
-msgid "[-- on %s --]\n"
-msgstr "[-- 在 %s --]\n"
-
-#: handler.c:1243
-#, c-format
-msgid "[-- name: %s --]\n"
-msgstr "[-- 名稱:%s --]\n"
-
-#: handler.c:1254 handler.c:1268
-#, fuzzy, c-format
-msgid "[-- This %s/%s attachment is not included, --]\n"
-msgstr "[-- 這個 %s/%s 附件 "
-
-#: handler.c:1256
-#, fuzzy
-msgid ""
-"[-- and the indicated external source has --]\n"
-"[-- expired. --]\n"
-msgstr ""
-"[-- 這個 %s/%s 附件無法被附上, --]\n"
-"[-- 並且被指示的外部原始檔已 --]\n"
-"[-- 過期。 --]\n"
-
-#: handler.c:1273
-#, fuzzy, c-format
-msgid "[-- and the indicated access-type %s is unsupported --]\n"
-msgstr ""
-"[-- 這個 %s/%s 附件無法被附上, --]\n"
-"[-- 並且被指示的存取類型 (access-type) %s 不被支援 --]\n"
-
-#: handler.c:1395
-msgid "Error: multipart/signed has no protocol."
-msgstr "錯誤:multipart/signed 沒有通訊協定。"
-
-#: handler.c:1406
-msgid "Error: multipart/encrypted has no protocol parameter!"
-msgstr "錯誤:multipart/encrypted 沒有任何通訊協定參數!"
-
-#: handler.c:1440
-msgid "Unable to open temporary file!"
-msgstr "無法開啟暫存檔!"
-
-#: handler.c:1498
-#, c-format
-msgid "[-- %s/%s is unsupported "
-msgstr "[-- %s/%s 尚未支援 "
-
-#: handler.c:1503
-#, c-format
-msgid "(use '%s' to view this part)"
-msgstr "(按 '%s' 來顯示這部份)"
-
-#: handler.c:1505
-msgid "(need 'view-attachments' bound to key!)"
-msgstr "(需要定義一個鍵給 'view-attachments' 來瀏覽附件!)"
-
-#: headers.c:161
-#, c-format
-msgid "%s: unable to attach file"
-msgstr "%s:無法附帶檔案"
-
-#: help.c:254
-msgid "ERROR: please report this bug"
-msgstr "錯誤:請回報這個問題"
-
-#: help.c:294
-msgid "<UNKNOWN>"
-msgstr "<不明的>"
-
-#: help.c:304
-msgid ""
-"\n"
-"Generic bindings:\n"
-"\n"
-msgstr ""
-"\n"
-"標準功能定義:\n"
-"\n"
-
-#: help.c:308
-msgid ""
-"\n"
-"Unbound functions:\n"
-"\n"
-msgstr ""
-"\n"
-"未被定義的功能:\n"
-"\n"
-
-#: help.c:316
-#, c-format
-msgid "Help for %s"
-msgstr "%s 的求助"
-
-#: hook.c:100
-msgid "bad formatted command string"
-msgstr ""
-
-#: hook.c:250
-#, c-format
-msgid "unhook: Can't do unhook * from within a hook."
-msgstr "unhook: 在 hook 裡面不能做 unhook *"
-
-#: hook.c:260
-#, c-format
-msgid "unhook: unknown hook type: %s"
-msgstr "unhook:不明的 hook type %s"
-
-#: hook.c:265
-#, c-format
-msgid "unhook: Can't delete a %s from within a %s."
-msgstr "unhook:不能從 %2$s 刪除 %1$s。"
-
-#: imap/auth.c:99 pop/pop_auth.c:385
-msgid "No authenticators available"
-msgstr "沒有認證方式"
-
-#: imap/auth_anon.c:37
-msgid "Authenticating (anonymous)..."
-msgstr "驗證中 (匿名)…"
-
-#: imap/auth_anon.c:65
-msgid "Anonymous authentication failed."
-msgstr "匿名驗證失敗。"
-
-#: imap/auth_cram.c:42
-msgid "Authenticating (CRAM-MD5)..."
-msgstr "驗證中 (CRAM-MD5)…"
-
-#: imap/auth_cram.c:121
-msgid "CRAM-MD5 authentication failed."
-msgstr "CRAM-MD5 驗證失敗。"
-
-#: imap/auth_gss.c:98
-msgid "Authenticating (GSSAPI)..."
-msgstr "驗證中 (GSSAPI)…"
-
-#: imap/auth_gss.c:252
-msgid "GSSAPI authentication failed."
-msgstr "GSSAPI 驗證失敗。"
-
-#: imap/auth_login.c:31
-msgid "LOGIN disabled on this server."
-msgstr "伺服器禁止了登入。"
-
-#: imap/auth_login.c:41 nntp/nntp.c:100 pop/pop_auth.c:228
-msgid "Logging in..."
-msgstr "登入中…"
-
-#: imap/auth_login.c:52 nntp/nntp.c:123 nntp/nntp.c:195 pop/pop_auth.c:270
-msgid "Login failed."
-msgstr "登入失敗。"
-
-#: imap/auth_sasl.c:90
-#, fuzzy, c-format
-msgid "Authenticating (%s)..."
-msgstr "驗證中 (APOP)…"
-
-#: imap/auth_sasl.c:170 pop/pop_auth.c:152
-msgid "SASL authentication failed."
-msgstr "SASL 驗證失敗。"
-
-#: imap/browse.c:70 imap/imap.c:544
-#, c-format
-msgid "%s is an invalid IMAP path"
-msgstr ""
-
-#: imap/browse.c:87
-msgid "Getting namespaces..."
-msgstr "拿取 namespace 中…"
-
-#: imap/browse.c:97
-msgid "Getting folder list..."
-msgstr "拿取目錄表中…"
-
-#: imap/browse.c:213
-#, fuzzy
-msgid "No such folder"
-msgstr "%s:沒有這種顏色"
-
-#: imap/browse.c:272
-msgid "Create mailbox: "
-msgstr "製作信箱:"
-
-#: imap/browse.c:276 imap/browse.c:319
-msgid "Mailbox must have a name."
-msgstr "信箱一定要有名字。"
-
-#: imap/browse.c:284
-msgid "Mailbox created."
-msgstr "已完成製造郵箱。"
-
-#: imap/browse.c:313
-#, fuzzy, c-format
-msgid "Rename mailbox %s to: "
-msgstr "製作信箱:"
-
-#: imap/browse.c:325
-#, fuzzy, c-format
-msgid "Rename failed: %s"
-msgstr "登入失敗: %s"
-
-#: imap/browse.c:330
-#, fuzzy
-msgid "Mailbox renamed."
-msgstr "已完成製造郵箱。"
-
-#: imap/command.c:290
-msgid "Mailbox closed"
-msgstr "郵箱已經關掉"
-
-#: imap/command.c:331
-msgid "Fatal error. Message count is out of sync!"
-msgstr "嚴重錯誤。信件數量不協調!"
-
-#: imap/imap.c:172 nntp/nntp.c:1096
-#, c-format
-msgid "Closing connection to %s..."
-msgstr "正在關閉與 %s 的連線…"
-
-#: imap/imap.c:323
-msgid "This IMAP server is ancient. Mutt does not work with it."
-msgstr "這個 IMAP 伺服器已過時,Mutt 無法使用它。"
-
-#: imap/imap.c:396
-msgid "Checking mailbox subscriptions"
-msgstr ""
-
-#: imap/imap.c:432 pop/pop_lib.c:271
-msgid "Secure connection with TLS?"
-msgstr "利用 TSL 來進行安全連接?"
-
-#: imap/imap.c:442 pop/pop_lib.c:291
-msgid "Could not negotiate TLS connection"
-msgstr "未能"
-
-#: imap/imap.c:456 pop/pop_lib.c:309
-#, fuzzy
-msgid "Encrypted connection unavailable"
-msgstr "加密的鑰匙"
-
-#: imap/imap.c:575 nntp/nntp.c:877
-#, c-format
-msgid "Selecting %s..."
-msgstr "正在選擇 %s …"
-
-#: imap/imap.c:698
-msgid "Error opening mailbox"
-msgstr "開啟信箱時發生錯誤"
-
-#: imap/imap.c:747 imap/message.c:708 muttlib.c:1224
-#, c-format
-msgid "Create %s?"
-msgstr "建立 %s?"
-
-#: imap/imap.c:987 pop/pop.c:447
-#, c-format
-msgid "Marking %d messages deleted..."
-msgstr "標簽了的 %d 封信件刪去了…"
-
-#: imap/imap.c:995
-msgid "Expunge failed"
-msgstr "刪除 (expunge) 失敗"
-
-#: imap/imap.c:1007
-#, c-format
-msgid "Saving message status flags... [%d/%d]"
-msgstr "正在儲存信件狀態旗標… [%d/%d]"