Rocco Rutte:

[apps/madmutt.git] / doc / manual.sgml.head

diff --git a/doc/manual.sgml.head b/doc/manual.sgml.head
index e2bb882..f07f026 100644 (file)
--- a/doc/manual.sgml.head
+++ b/doc/manual.sgml.head
@@ -13,7 +13,7 @@
 
 <sect>Introduction
 <p>
 
 <sect>Introduction
 <p>

-<bf/Mutt/ is a small but very powerful text-based MIME mail client.  Mutt is
+<bf/Mutt-ng/ is a small but very powerful text-based MIME mail client.  Mutt-ng is

 highly configurable, and is well suited to the mail power user with advanced
 features like key bindings, keyboard macros, mail threading, regular
 expression searches and a powerful pattern matching language for selecting
 highly configurable, and is well suited to the mail power user with advanced
 features like key bindings, keyboard macros, mail threading, regular
 expression searches and a powerful pattern matching language for selecting


@@ -26,15 +26,11 @@ add other new features. Features specific to Mutt-ng will be discussed in
 an extra section. Don't be confused when most of the documentation talk about
 Mutt and not Mutt-ng, Mutt-ng contains all Mutt-ng features, plus many more.
 
 an extra section. Don't be confused when most of the documentation talk about
 Mutt and not Mutt-ng, Mutt-ng contains all Mutt-ng features, plus many more.
 

-<sect1>Mutt Home Page
-<p>
-<htmlurl url="http://www.mutt.org/"
-name="http://www.mutt.org/">

 
 <sect1>Mutt-ng Home Page
 <p>
 
 <sect1>Mutt-ng Home Page
 <p>

-<htmlurl url="http://mutt-ng.berlios.de/"
-name="http://mutt-ng.berlios.de/">
+<htmlurl url="http://www.muttng.org/"
+name="http://www.muttng.org">

 
 <sect1>Mailing Lists
 <p>
 
 <sect1>Mailing Lists
 <p>


@@ -1713,6 +1709,19 @@ If the filename ends with a vertical bar (|), then <em/filename/ is
 considered to be an executable program from which to read input (eg.
 <tt>source ~/bin/myscript|</tt>).
 
 considered to be an executable program from which to read input (eg.
 <tt>source ~/bin/myscript|</tt>).
 

+<sect1>Configuring features conditionnaly<label id="ifdef">
+<p>
+Usage: <tt/ifdef/ <em/item/ <em/command/
+
+This command allows to test if a feature has been compiled in, before
+actually executing the command. Item can be either the name of a
+function or a variable.
+
+Example:
+<tscreen><verb>
+ifdef imap_keepalive 'source ~/.mutt/imap_setup'
+</verb></tscreen>
+

 <sect1>Removing hooks<label id="unhook">
 <p>
 Usage: <tt/unhook/ &lsqb; * | <em/hook-type/ &rsqb;
 <sect1>Removing hooks<label id="unhook">
 <p>
 Usage: <tt/unhook/ &lsqb; * | <em/hook-type/ &rsqb;


@@ -2419,9 +2428,6 @@ either by misconfigured software or bad behaviour from some
 correspondents. This allows to clean your mailboxes formats) from these
 annoyances which make it hard to follow a discussion.
 
 correspondents. This allows to clean your mailboxes formats) from these
 annoyances which make it hard to follow a discussion.
 

-If you want to use these functions with IMAP, you need to compile Mutt
-with the <em/--enable-imap-edit-threads/ configure flag.
-

 <sect2>Linking threads
 <p>
 
 <sect2>Linking threads
 <p>
 


@@ -2544,15 +2550,10 @@ name="&dollar;imap&lowbar;list&lowbar;subscribed"> variable.
 
 Polling for new mail on an IMAP server can cause noticeable delays. So, you'll
 want to carefully tune the
 
 Polling for new mail on an IMAP server can cause noticeable delays. So, you'll
 want to carefully tune the

-<ref id="mail_check" name="&dollar;mail&lowbar;check">
+<ref id="imap_mail_check" name="&dollar;imap&lowbar;mail&lowbar;check">

 and
 <ref id="timeout" name="&dollar;timeout">
 and
 <ref id="timeout" name="&dollar;timeout">

-variables. Personally I use
-<tscreen><verb>
-set mail_check=90
-set timeout=15
-</verb></tscreen>
-with relatively good results over my slow modem line.
+variables.

 
 Note that if you are using mbox as the mail store on UW servers prior to
 v12.250, the server has been reported to disconnect a client if another client
 
 Note that if you are using mbox as the mail store on UW servers prior to
 v12.250, the server has been reported to disconnect a client if another client


@@ -2565,7 +2566,7 @@ As of version 1.2, mutt supports browsing mailboxes on an IMAP
 server. This is mostly the same as the local file browser, with the
 following differences:
 <itemize>
 server. This is mostly the same as the local file browser, with the
 following differences:
 <itemize>

-<item>In lieu of file permissions, mutt displays the string "IMAP",
+<item>Instead of file permissions, mutt displays the string "IMAP",

   possibly followed by the symbol "+", indicating
   that the entry contains both messages and subfolders. On
   Cyrus-like servers folders will often contain both messages and
   possibly followed by the symbol "+", indicating
   that the entry contains both messages and subfolders. On
   Cyrus-like servers folders will often contain both messages and