<Tab> complete complete filename or alias
^T complete-query complete address with query
^K kill-eol delete to the end of the line
- ESC d kill-eow delete to the end ot the word
+ ESC d kill-eow delete to the end of the word
^W kill-word kill the word in front of the cursor
^U kill-line delete entire line
^V quote-char quote the next typed key
_\b2_\b._\b3_\b._\b3 _\bT_\bh_\br_\be_\ba_\bd_\be_\bd _\bM_\bo_\bd_\be
- When the mailbox is _\bs_\bo_\br_\bt_\be_\bd (section 6.3.288 , page 133) by _\bt_\bh_\br_\be_\ba_\bd_\bs, there are
+ When the mailbox is _\bs_\bo_\br_\bt_\be_\bd (section 6.3.288 , page 134) by _\bt_\bh_\br_\be_\ba_\bd_\bs, there are
a few additional functions available in the _\bi_\bn_\bd_\be_\bx and _\bp_\ba_\bg_\be_\br modes.
^D delete-thread delete all messages in the current thread
match the regular expressions given by the _\bl_\bi_\bs_\bt_\bs _\bo_\br _\bs_\bu_\bb_\bs_\bc_\br_\bi_\bb_\be (section 3.10 ,
page 24) commands, but also honor any Mail-Followup-To header(s) if the
- _\b$_\bh_\bo_\bn_\bo_\br_\b__\bf_\bo_\bl_\bl_\bo_\bw_\bu_\bp_\b__\bt_\bo (section 6.3.87 , page 84) configuration variable is set.
+ _\b$_\bh_\bo_\bn_\bo_\br_\b__\bf_\bo_\bl_\bl_\bo_\bw_\bu_\bp_\b__\bt_\bo (section 6.3.87 , page 85) configuration variable is set.
Using this when replying to messages posted to mailing lists helps avoid dupli-
cate copies being sent to the author of the message you are replying to.
Asks for an external Unix command and pipes the current or tagged message(s) to
it. The variables _\b$_\bp_\bi_\bp_\be_\b__\bd_\be_\bc_\bo_\bd_\be (section 6.3.199 , page 113), _\b$_\bp_\bi_\bp_\be_\b__\bs_\bp_\bl_\bi_\bt
- (section 6.3.201 , page 114), _\b$_\bp_\bi_\bp_\be_\b__\bs_\be_\bp (section 6.3.200 , page 113) and
+ (section 6.3.201 , page 114), _\b$_\bp_\bi_\bp_\be_\b__\bs_\be_\bp (section 6.3.200 , page 114) and
_\b$_\bw_\ba_\bi_\bt_\b__\bk_\be_\by (section 6.3.329 , page 145) control the exact behavior of this
function.
Mutt-ng will then enter the _\bc_\bo_\bm_\bp_\bo_\bs_\be menu and prompt you for the recipients to
place on the ``To:'' header field. Next, it will ask you for the ``Subject:''
field for the message, providing a default if you are replying to or forwarding
- a message. See also _\b$_\ba_\bs_\bk_\bc_\bc (section 6.3.10 , page 66), _\b$_\ba_\bs_\bk_\bb_\bc_\bc (section
+ a message. See also _\b$_\ba_\bs_\bk_\bc_\bc (section 6.3.10 , page 67), _\b$_\ba_\bs_\bk_\bb_\bc_\bc (section
6.3.9 , page 66), _\b$_\ba_\bu_\bt_\bo_\be_\bd_\bi_\bt (section 6.3.17 , page 69), _\b$_\bb_\bo_\bu_\bn_\bc_\be (section
6.3.20 , page 69), and _\b$_\bf_\ba_\bs_\bt_\b__\br_\be_\bp_\bl_\by (section 6.3.59 , page 78) for changing
how Mutt-ng asks these questions.
is set, the headers will be at the top of the message in your editor. Any mes-
sages you are replying to will be added in sort order to the message, with
appropriate _\b$_\ba_\bt_\bt_\br_\bi_\bb_\bu_\bt_\bi_\bo_\bn (section 6.3.15 , page 68), _\b$_\bi_\bn_\bd_\be_\bn_\bt_\b__\bs_\bt_\br_\bi_\bn_\bg (section
- 6.3.108 , page 89) and _\b$_\bp_\bo_\bs_\bt_\b__\bi_\bn_\bd_\be_\bn_\bt_\b__\bs_\bt_\br_\bi_\bn_\bg (section 6.3.211 , page 116).
+ 6.3.108 , page 90) and _\b$_\bp_\bo_\bs_\bt_\b__\bi_\bn_\bd_\be_\bn_\bt_\b__\bs_\bt_\br_\bi_\bn_\bg (section 6.3.211 , page 116).
When forwarding a message, if the _\b$_\bm_\bi_\bm_\be_\b__\bf_\bo_\br_\bw_\ba_\br_\bd (section 6.3.135 , page 97)
variable is unset, a copy of the forwarded message will be included. If you
have specified a _\b$_\bs_\bi_\bg_\bn_\ba_\bt_\bu_\br_\be (section 6.3.258 , page 127), it will be appended
encrypted using the selected public keys, and sent out.
Most fields of the entries in the key selection menu (see also _\b$_\bp_\bg_\bp_\b__\be_\bn_\bt_\br_\by_\b__\bf_\bo_\br_\b-
- _\bm_\ba_\bt (section 6.3.178 , page 108)) have obvious meanings. But some explana-
+ _\bm_\ba_\bt (section 6.3.178 , page 109)) have obvious meanings. But some explana-
tions on the capabilities, flags, and validity fields are in order.
The flags sequence (%f) will expand to one of the following flags:
At times it is desirable to delay sending a message that you have already begun
to compose. When the _\bp_\bo_\bs_\bt_\bp_\bo_\bn_\be_\b-_\bm_\be_\bs_\bs_\ba_\bg_\be function is used in the _\bc_\bo_\bm_\bp_\bo_\bs_\be menu,
the body of your message and attachments are stored in the mailbox specified by
- the _\b$_\bp_\bo_\bs_\bt_\bp_\bo_\bn_\be_\bd (section 6.3.213 , page 116) variable. This means that you can
+ the _\b$_\bp_\bo_\bs_\bt_\bp_\bo_\bn_\be_\bd (section 6.3.213 , page 117) variable. This means that you can
recall the message even if you exit Mutt-ng and then restart it at a later
time.
newsserver via NNTP. You can open a newsgroup with function ``change-news-
group'' (default: i). Default newsserver can be obtained from _\bN_\bN_\bT_\bP_\bS_\bE_\bR_\bV_\bE_\bR envi-
ronment variable. Like other news readers, info about subscribed newsgroups is
- saved in file by _\b$_\bn_\be_\bw_\bs_\br_\bc (section , page ) variable. Article headers are
- cached and can be loaded from file when newsgroup entered instead loading from
- newsserver.
+ saved in file by _\b$_\bn_\bn_\bt_\bp_\b__\bn_\be_\bw_\bs_\br_\bc (section 6.3.155 , page 103) variable. Article
+ headers are cached and can be loaded from file when newsgroup entered instead
+ loading from newsserver.
_\b3_\b. _\bC_\bo_\bn_\bf_\bi_\bg_\bu_\br_\ba_\bt_\bi_\bo_\bn
folder-hook's, they are executed in the order given in the muttrc.
N\bNo\bot\bte\be:\b: if you use the ``!'' shortcut for _\b$_\bs_\bp_\bo_\bo_\bl_\bf_\bi_\bl_\be (section 6.3.294 , page
- 135) at the beginning of the pattern, you must place it inside of double or
+ 136) at the beginning of the pattern, you must place it inside of double or
single quotes in order to distinguish it from the logical _\bn_\bo_\bt operator for the
expression.
The Mutt-ng E-Mail Client 26
- 6.3.294 , page 135)) should be executed before the mailboxes command.
+ 6.3.294 , page 136)) should be executed before the mailboxes command.
_\b3_\b._\b1_\b3 _\bU_\bs_\be_\br _\bd_\be_\bf_\bi_\bn_\be_\bd _\bh_\be_\ba_\bd_\be_\br_\bs
Usage: reset _\bv_\ba_\br_\bi_\ba_\bb_\bl_\be [_\bv_\ba_\br_\bi_\ba_\bb_\bl_\be ... ]
This command is used to set (and unset) _\bc_\bo_\bn_\bf_\bi_\bg_\bu_\br_\ba_\bt_\bi_\bo_\bn _\bv_\ba_\br_\bi_\ba_\bb_\bl_\be_\bs (section 6.3 ,
- page 64). There are four basic types of variables: boolean, number, string and
+ page 65). There are four basic types of variables: boolean, number, string and
quadoption. _\bb_\bo_\bo_\bl_\be_\ba_\bn variables can be _\bs_\be_\bt (true) or _\bu_\bn_\bs_\be_\bt (false). _\bn_\bu_\bm_\bb_\be_\br
variables can be assigned a positive integer value.
_\b3_\b._\b2_\b7 _\bC_\bo_\bn_\bf_\bi_\bg_\bu_\br_\bi_\bn_\bg _\bf_\be_\ba_\bt_\bu_\br_\be_\bs _\bc_\bo_\bn_\bd_\bi_\bt_\bi_\bo_\bn_\ba_\bl_\bl_\by
- Usage: ifdef _\bi_\bt_\be_\bm _\bc_\bo_\bm_\bm_\ba_\bn_\bd Usage: ifndef _\bi_\bt_\be_\bm _\bc_\bo_\bm_\bm_\ba_\bn_\bd
+ Usage: ifdef _\bi_\bt_\be_\bm _\bc_\bo_\bm_\bm_\ba_\bn_\bd
- These command allows to test if a variable, function or certain feature is
- available or not respectively, before actually executing the command. ifdef
- (short for ``if defined) handles commands if upon availability while ifndef
+ Usage: ifndef _\bi_\bt_\be_\bm _\bc_\bo_\bm_\bm_\ba_\bn_\bd
+
+ These commands allow testing for a variable, function or certain feature being
The Mutt-ng E-Mail Client 33
- (short for ``if not defined'') does if not. The _\bc_\bo_\bm_\bm_\ba_\bn_\bd may be any valid frac-
- tion of a configuration file.
+ available or not respectively, before actually executing the command given.
+
+ ifdef (short for ``if defined'') only executes the command upon availability
+ while ifndef (short for ``if not defined'') does if not. The _\bc_\bo_\bm_\bm_\ba_\bn_\bd may be any
+ valid fraction of a configuration file.
- All names of variables and functions may be tested. Additionally, the following
- compile-features may be tested when prefixed with 'feature_': ncurses, slang,
- iconv, idn, dotlock, standalone, pop, nntp, imap, ssl, gnutls, sasl, sasl2,
- libesmtp, compressed, color, classic_pgp, classic_smime, gpgme, header_cache.
+ All names of variables, functions and menus may be tested. Additionally, the
+ following compile-features may be tested when prefixed with 'feature_':
+ ncurses, slang, iconv, idn, dotlock, standalone, pop, nntp, imap, ssl, gnutls,
+ sasl, sasl2, libesmtp, compressed, color, classic_pgp, classic_smime, gpgme,
+ header_cache, gdbm, qdbm and db4.
Examples follow.
- To only source a file with IMAP related settings only if IMAP support is com-
- piled in, use:
+ To only source a file with IMAP related settings if IMAP support is compiled
+ in, use:
ifdef feature_imap 'source ~/.mutt-ng/imap_setup'
# or
# or
# ...
- To only set the _\b<_\b$_\bi_\bm_\ba_\bp_\b__\bm_\ba_\bi_\bl_\b__\bc_\bh_\be_\bc_\bk (section 6.3.98 , page 87) when the system's
- SVN is recent enough to have it:
+ To only set the _\b$_\bi_\bm_\ba_\bp_\b__\bm_\ba_\bi_\bl_\b__\bc_\bh_\be_\bc_\bk (section 6.3.98 , page 87) variable if the
+ system's mutt-ng is aware of it, use:
- ifdef imap_mail_check 'set imap_mail_check=300'
+ ifdef imap_mail_check 'set imap_mail_check=500'
_\b3_\b._\b2_\b8 _\bR_\be_\bm_\bo_\bv_\bi_\bn_\bg _\bh_\bo_\bo_\bk_\bs
_\b4_\b._\b1 _\bR_\be_\bg_\bu_\bl_\ba_\br _\bE_\bx_\bp_\br_\be_\bs_\bs_\bi_\bo_\bn_\bs
- All string patterns in Mutt-ng including those in more complex _\bp_\ba_\bt_\bt_\be_\br_\bn_\bs (sec-
- tion 4.2 , page 36) must be specified using regular expressions (regexp) in
- the ``POSIX extended'' syntax (which is more or less the syntax used by egrep
- and GNU awk). For your convenience, we have included below a brief description
- of this syntax.
+ All string patterns in Mutt-ng including those in more complex _\bp_\ba_\bt_\bt_\be_\br_\bn_\bs
The Mutt-ng E-Mail Client 34
+ (section 4.2 , page 36) must be specified using regular expressions (regexp)
+ in the ``POSIX extended'' syntax (which is more or less the syntax used by
+ egrep and GNU awk). For your convenience, we have included below a brief
+ description of this syntax.
+
The search is case sensitive if the pattern contains at least one upper case
letter, and case insensitive otherwise. Note that ``\'' must be quoted if used
for a regular expression in an initialization command: ``\\''.
[:cntrl:]
Control characters.
+ The Mutt-ng E-Mail Client 35
+
[:digit:]
Numeric characters.
[:graph:]
- Characters that are both printable and visible. (A space is
-
- The Mutt-ng E-Mail Client 35
-
- printable, but not visible, while an ``a'' is both.)
+ Characters that are both printable and visible. (A space is print-
+ able, but not visible, while an ``a'' is both.)
[:lower:]
Lower-case alphabetic characters.
?
The preceding item is optional and matched at most once.
+ The Mutt-ng E-Mail Client 36
+
*
The preceding item will be matched zero or more times.
- The Mutt-ng E-Mail Client 36
-
+
The preceding item will be matched one or more times.
\\W
Matches any character that is not word-constituent.
+ The Mutt-ng E-Mail Client 37
+
\\`
Matches the empty string at the beginning of a buffer (string).
- The Mutt-ng E-Mail Client 37
-
\\'
Matches the empty string at the end of a buffer.
'~s "^Junk +From +Me$" ~f ("Jim +Somebody"|"Ed +SomeoneElse")'
- Note that if a regular expression contains parenthesis, or a veritical bar
+ Note that if a regular expression contains parenthesis, or a vertical bar
("|"), you m\bmu\bus\bst\bt enclose the expression in double or single quotes since those
characters are also used to separate different parts of Mutt-ng's pattern lan-
guage. For example,
These shortcuts can be used anywhere you are prompted for a file or mailbox
path.
- +\bo ! -- refers to your _\b$_\bs_\bp_\bo_\bo_\bl_\bf_\bi_\bl_\be (section 6.3.294 , page 135) (incoming)
+ +\bo ! -- refers to your _\b$_\bs_\bp_\bo_\bo_\bl_\bf_\bi_\bl_\be (section 6.3.294 , page 136) (incoming)
mailbox
+\bo > -- refers to your _\b$_\bm_\bb_\bo_\bx (section 6.3.123 , page 95) file
Conversely, when group-replying or list-replying to a message which has a Mail-
Followup-To header, mutt will respect this header if the _\b$_\bh_\bo_\bn_\bo_\br_\b__\bf_\bo_\bl_\bl_\bo_\bw_\bu_\bp_\b__\bt_\bo
- (section 6.3.87 , page 84) configuration variable is set. Using list-reply
+ (section 6.3.87 , page 85) configuration variable is set. Using list-reply
will in this case also make sure that the reply goes to the mailing list, even
if it's not specified in the list of recipients in the Mail-Followup-To.
The Mutt-ng E-Mail Client 47
- Lastly, Mutt-ng has the ability to _\bs_\bo_\br_\bt (section 6.3.288 , page 133) the mail-
+ Lastly, Mutt-ng has the ability to _\bs_\bo_\br_\bt (section 6.3.288 , page 134) the mail-
box into _\bt_\bh_\br_\be_\ba_\bd_\bs (section 2.3.3 , page 7). A thread is a group of messages
which all relate to the same subject. This is usually organized into a tree-
like structure where a message and all of its replies are represented graphi-
Polling for new mail is more expensive over POP3 than locally. For this reason
the frequency at which Mutt-ng will check for mail remotely can be controlled
- by the _\b$_\bp_\bo_\bp_\b__\bc_\bh_\be_\bc_\bk_\bi_\bn_\bt_\be_\br_\bv_\ba_\bl (section , page ) variable, which defaults to every
- 60 seconds.
+ by the _\b$_\bp_\bo_\bp_\b__\bm_\ba_\bi_\bl_\b__\bc_\bh_\be_\bc_\bk (section 6.3.207 , page 115) variable, which defaults
+ to every 60 seconds.
If Mutt-ng was compiled with SSL support (by running the _\bc_\bo_\bn_\bf_\bi_\bg_\bu_\br_\be script with
the _\b-_\b-_\bw_\bi_\bt_\bh_\b-_\bs_\bs_\bl flag), connections to POP3 servers can be encrypted. This natu-
Another way to access your POP3 mail is the _\bf_\be_\bt_\bc_\bh_\b-_\bm_\ba_\bi_\bl function (default: G).
It allows to connect to _\bp_\bo_\bp_\b__\bh_\bo_\bs_\bt (section 6.3.205 , page 115), fetch all your
- new mail and place it in the local _\bs_\bp_\bo_\bo_\bl_\bf_\bi_\bl_\be (section 6.3.294 , page 135).
+ new mail and place it in the local _\bs_\bp_\bo_\bo_\bl_\bf_\bi_\bl_\be (section 6.3.294 , page 136).
After this point, Mutt-ng runs exactly as if the mail had always been local.
N\bNo\bot\bte\be:\b: If you only need to fetch all messages to local mailbox you should con-
tors. This is overridden by an explicit username in the mailbox path (i.e.
by using a mailbox name of the form {user@host}).
- +\bo _\b$_\bi_\bm_\ba_\bp_\b__\bp_\ba_\bs_\bs (section 6.3.99 , page 87) - a password which you may preset,
+ +\bo _\b$_\bi_\bm_\ba_\bp_\b__\bp_\ba_\bs_\bs (section 6.3.99 , page 88) - a password which you may preset,
used by all authentication methods where a password is needed.
+\bo _\b$_\bi_\bm_\ba_\bp_\b__\ba_\bu_\bt_\bh_\be_\bn_\bt_\bi_\bc_\ba_\bt_\bo_\br_\bs (section 6.3.90 , page 85) - a colon-delimited list
compressed. This is important because it allows the use of programs that do not
have well defined extensions. Just use '.' as a regexp. But this may be sur-
prising if your compressing script produces empty files. In this situation,
- unset _\b$_\bs_\ba_\bv_\be_\b__\be_\bm_\bp_\bt_\by (section 6.3.239 , page 122), so that the compressed file
+ unset _\b$_\bs_\ba_\bv_\be_\b__\be_\bm_\bp_\bt_\by (section 6.3.239 , page 123), so that the compressed file
will be removed if you delete all of the messages.
_\b4_\b._\b1_\b6_\b._\b1 _\bO_\bp_\be_\bn _\ba _\bc_\bo_\bm_\bp_\br_\be_\bs_\bs_\be_\bd _\bm_\ba_\bi_\bl_\bb_\bo_\bx _\bf_\bo_\br _\br_\be_\ba_\bd_\bi_\bn_\bg
The interpretation of shell meta-characters embedded in MIME parameters can
lead to security problems in general. Mutt-ng tries to quote parameters in
expansion of %s syntaxes properly, and avoids risky characters by substituting
- them, see the _\bm_\ba_\bi_\bl_\bc_\ba_\bp_\b__\bs_\ba_\bn_\bi_\bt_\bi_\bz_\be (section 6.3.116 , page 93) variable.
+ them, see the _\bm_\ba_\bi_\bl_\bc_\ba_\bp_\b__\bs_\ba_\bn_\bi_\bt_\bi_\bz_\be (section 6.3.116 , page 94) variable.
Although mutt's procedures to invoke programs with mailcap seem to be safe,
there are other applications parsing mailcap, maybe taking less care of it.
-a attach a file to a message
-b specify a blind carbon-copy (BCC) address
-c specify a carbon-copy (Cc) address
+ -D print the value of all variables on stdout
-e specify a config command to be run after initialization files are read
-f specify a mailbox to load
-F specify an alternate file to read initialization commands
+\bo _\ba_\bc_\bc_\bo_\bu_\bn_\bt_\b-_\bh_\bo_\bo_\bk (section 4.14 , page 49) _\bp_\ba_\bt_\bt_\be_\br_\bn _\bc_\bo_\bm_\bm_\ba_\bn_\bd
- +\bo _\ba_\bl_\bi_\ba_\bs (section 3.2 , page 16) _\bk_\be_\by _\ba_\bd_\bd_\br_\be_\bs_\bs [ , _\ba_\bd_\bd_\br_\be_\bs_\bs, ... ]
-
The Mutt-ng E-Mail Client 64
+ +\bo _\ba_\bl_\bi_\ba_\bs (section 3.2 , page 16) _\bk_\be_\by _\ba_\bd_\bd_\br_\be_\bs_\bs [ , _\ba_\bd_\bd_\br_\be_\bs_\bs, ... ]
+
+\bo _\bu_\bn_\ba_\bl_\bi_\ba_\bs (section 3.2 , page 16) [ * | _\bk_\be_\by ... ]
+\bo _\ba_\bl_\bt_\be_\br_\bn_\ba_\bt_\be_\bs (section 3.9 , page 23) _\br_\be_\bg_\be_\bx_\bp [ _\br_\be_\bg_\be_\bx_\bp ... ]
+\bo _\bm_\ba_\bi_\bl_\bb_\bo_\bx_\be_\bs (section 3.12 , page 25) _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be [ _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be ... ]
- +\bo _\bm_\bb_\bo_\bx_\b-_\bh_\bo_\bo_\bk (section 3.11 , page 25) _\bp_\ba_\bt_\bt_\be_\br_\bn _\bm_\ba_\bi_\bl_\bb_\bo_\bx
-
The Mutt-ng E-Mail Client 65
+ +\bo _\bm_\bb_\bo_\bx_\b-_\bh_\bo_\bo_\bk (section 3.11 , page 25) _\bp_\ba_\bt_\bt_\be_\br_\bn _\bm_\ba_\bi_\bl_\bb_\bo_\bx
+
+\bo _\bm_\be_\bs_\bs_\ba_\bg_\be_\b-_\bh_\bo_\bo_\bk (section 3.19 , page 28) _\bp_\ba_\bt_\bt_\be_\br_\bn _\bc_\bo_\bm_\bm_\ba_\bn_\bd
+\bo _\bm_\bi_\bm_\be_\b__\bl_\bo_\bo_\bk_\bu_\bp (section 5.6 , page 61) _\bm_\bi_\bm_\be_\bt_\by_\bp_\be [ _\bm_\bi_\bm_\be_\bt_\by_\bp_\be ... ]
_\b6_\b._\b3 _\bC_\bo_\bn_\bf_\bi_\bg_\bu_\br_\ba_\bt_\bi_\bo_\bn _\bv_\ba_\br_\bi_\ba_\bb_\bl_\be_\bs
- _\b6_\b._\b3_\b._\b1 _\ba_\bb_\bo_\br_\bt_\b__\bn_\bo_\bs_\bu_\bb_\bj_\be_\bc_\bt
-
The Mutt-ng E-Mail Client 66
+ _\b6_\b._\b3_\b._\b1 _\ba_\bb_\bo_\br_\bt_\b__\bn_\bo_\bs_\bu_\bb_\bj_\be_\bc_\bt
+
Type: quadoption
Default: ask-yes
%r
address which alias expands to
+ The Mutt-ng E-Mail Client 67
+
%t
character which indicates if the alias is tagged for inclusion
- The Mutt-ng E-Mail Client 67
-
_\b6_\b._\b3_\b._\b5 _\ba_\bl_\bl_\bo_\bw_\b__\b8_\bb_\bi_\bt
Type: boolean
If _\bs_\be_\bt, Mutt-ng will prompt you for blind-carbon-copy (Bcc) recipients before
editing an outgoing message.
+ The Mutt-ng E-Mail Client 68
+
_\b6_\b._\b3_\b._\b1_\b0 _\ba_\bs_\bk_\bc_\bc
Type: boolean
- The Mutt-ng E-Mail Client 68
-
Default: no
If _\bs_\be_\bt, Mutt-ng will prompt you for carbon-copy (Cc) recipients before editing
%f
filename
+ The Mutt-ng E-Mail Client 69
+
%I
MIME Content-Disposition: header field (I=inline, A=attachment)
- The Mutt-ng E-Mail Client 69
-
%m
major MIME type
Type: string
- Default: 'On %d, %n wrote:'
-
The Mutt-ng E-Mail Client 70
+ Default: 'On %d, %n wrote:'
+
This is the string that will precede a message which has been included in a
reply. For a full listing of defined printf(3)-like sequences see the section
on ``_\b$_\bi_\bn_\bd_\be_\bx_\b__\bf_\bo_\br_\bm_\ba_\bt (section 6.3.109 , page 90)''.
Default: ask-yes
- Controls whether you will be asked to confirm bouncing messages. If set to _\by_\be_\bs
- you don't get asked if you want to bounce a message. Setting this variable to
-
The Mutt-ng E-Mail Client 71
+ Controls whether you will be asked to confirm bouncing messages. If set to _\by_\be_\bs
+ you don't get asked if you want to bounce a message. Setting this variable to
_\bn_\bo is not generally useful, and thus not recommended, because you are unable to
bounce messages.
Character set your terminal uses to display and enter textual data.
+ The Mutt-ng E-Mail Client 72
+
_\b6_\b._\b3_\b._\b2_\b5 _\bc_\bh_\be_\bc_\bk_\b__\bn_\be_\bw
Type: boolean
- The Mutt-ng E-Mail Client 72
-
Default: yes
N\bNo\bot\bte\be:\b: this option only affects _\bm_\ba_\bi_\bl_\bd_\bi_\br and _\bM_\bH style mailboxes.
Default: ''
- When defined, Mutt-ng will recode commands in rc files from this encoding.
-
The Mutt-ng E-Mail Client 73
+ When defined, Mutt-ng will recode commands in rc files from this encoding.
+
_\b6_\b._\b3_\b._\b2_\b9 _\bc_\bo_\bn_\bf_\bi_\br_\bm_\ba_\bp_\bp_\be_\bn_\bd
Type: boolean
Type: boolean
- Default: no
-
The Mutt-ng E-Mail Client 74
+ Default: no
+
Setting this variable will cause Mutt-ng to always attempt to PGP encrypt out-
going messages. This is probably only useful in connection to the _\bs_\be_\bn_\bd_\b-_\bh_\bo_\bo_\bk
command. It can be overridden by use of the _\bp_\bg_\bp_\b-_\bm_\be_\bn_\bu, when encryption is not
encryption/signing for messages. See also ``_\b$_\bc_\br_\by_\bp_\bt_\b__\ba_\bu_\bt_\bo_\be_\bn_\bc_\br_\by_\bp_\bt (section
6.3.34 , page 72)'', ``_\b$_\bc_\br_\by_\bp_\bt_\b__\br_\be_\bp_\bl_\by_\be_\bn_\bc_\br_\by_\bp_\bt (section 6.3.38 , page 73)'',
``_\b$_\bc_\br_\by_\bp_\bt_\b__\ba_\bu_\bt_\bo_\bs_\bi_\bg_\bn (section 6.3.36 , page 73)'', ``_\b$_\bc_\br_\by_\bp_\bt_\b__\br_\be_\bp_\bl_\by_\bs_\bi_\bg_\bn (section
- 6.3.39 , page 73)'' and ``_\b$_\bs_\bm_\bi_\bm_\be_\b__\bi_\bs_\b__\bd_\be_\bf_\ba_\bu_\bl_\bt (section 6.3.276 , page 131)''.
+ 6.3.39 , page 74)'' and ``_\b$_\bs_\bm_\bi_\bm_\be_\b__\bi_\bs_\b__\bd_\be_\bf_\ba_\bu_\bl_\bt (section 6.3.276 , page 131)''.
_\b6_\b._\b3_\b._\b3_\b6 _\bc_\br_\by_\bp_\bt_\b__\ba_\bu_\bt_\bo_\bs_\bi_\bg_\bn
encryption/signing for messages. See also ``_\b$_\bc_\br_\by_\bp_\bt_\b__\ba_\bu_\bt_\bo_\be_\bn_\bc_\br_\by_\bp_\bt (section
6.3.34 , page 72)'', ``_\b$_\bc_\br_\by_\bp_\bt_\b__\br_\be_\bp_\bl_\by_\be_\bn_\bc_\br_\by_\bp_\bt (section 6.3.38 , page 73)'',
``_\b$_\bc_\br_\by_\bp_\bt_\b__\ba_\bu_\bt_\bo_\bs_\bi_\bg_\bn (section 6.3.36 , page 73)'', ``_\b$_\bc_\br_\by_\bp_\bt_\b__\br_\be_\bp_\bl_\by_\bs_\bi_\bg_\bn (section
- 6.3.39 , page 73)'' and ``_\b$_\bs_\bm_\bi_\bm_\be_\b__\bi_\bs_\b__\bd_\be_\bf_\ba_\bu_\bl_\bt (section 6.3.276 , page 131)''.
+ 6.3.39 , page 74)'' and ``_\b$_\bs_\bm_\bi_\bm_\be_\b__\bi_\bs_\b__\bd_\be_\bf_\ba_\bu_\bl_\bt (section 6.3.276 , page 131)''.
_\b6_\b._\b3_\b._\b3_\b8 _\bc_\br_\by_\bp_\bt_\b__\br_\be_\bp_\bl_\by_\be_\bn_\bc_\br_\by_\bp_\bt
Default: yes
If _\bs_\be_\bt, automatically PGP or OpenSSL encrypt replies to messages which are
- encrypted. (Crypto only)
The Mutt-ng E-Mail Client 75
+ encrypted. (Crypto only)
+
_\b6_\b._\b3_\b._\b3_\b9 _\bc_\br_\by_\bp_\bt_\b__\br_\be_\bp_\bl_\by_\bs_\bi_\bg_\bn
Type: boolean
encrypted. This makes sense in combination with ``_\b$_\bc_\br_\by_\bp_\bt_\b__\br_\be_\bp_\bl_\by_\be_\bn_\bc_\br_\by_\bp_\bt (section
6.3.38 , page 73)'', because it allows you to sign all messages which are
automatically encrypted. This works around the problem noted in
- ``_\b$_\bc_\br_\by_\bp_\bt_\b__\br_\be_\bp_\bl_\by_\bs_\bi_\bg_\bn (section 6.3.39 , page 73)'', that Mutt-ng is not able to
+ ``_\b$_\bc_\br_\by_\bp_\bt_\b__\br_\be_\bp_\bl_\by_\bs_\bi_\bg_\bn (section 6.3.39 , page 74)'', that Mutt-ng is not able to
find out whether an encrypted message is also signed. (Crypto only)
_\b6_\b._\b3_\b._\b4_\b1 _\bc_\br_\by_\bp_\bt_\b__\bt_\bi_\bm_\be_\bs_\bt_\ba_\bm_\bp
Type: quadoption
- Default: yes
-
The Mutt-ng E-Mail Client 76
+ Default: yes
+
If ``_\by_\be_\bs'', always attempt to verify PGP or S/MIME signatures. If ``_\ba_\bs_\bk'', ask
whether or not to verify the signature. If ``_\bn_\bo'', never attempt to verify
cryptographic signatures. (Crypto only)
Default: yes
- If this option is _\bs_\be_\bt, Mutt-ng will untag messages when marking them for dele-
- tion. This applies when you either explicitly delete a message, or when you
-
The Mutt-ng E-Mail Client 77
+ If this option is _\bs_\be_\bt, Mutt-ng will untag messages when marking them for dele-
+ tion. This applies when you either explicitly delete a message, or when you
save it to another folder.
_\b6_\b._\b3_\b._\b4_\b8 _\bd_\bi_\bg_\be_\bs_\bt_\b__\bc_\bo_\bl_\bl_\ba_\bp_\bs_\be
Type: string
- Default: ''
-
The Mutt-ng E-Mail Client 78
+ Default: ''
+
N\bNo\bot\bte\be:\b: you should not enable this unless you are using Sendmail 8.8.x or
greater.
_\b6_\b._\b3_\b._\b5_\b7 _\be_\bn_\bv_\be_\bl_\bo_\bp_\be_\b__\bf_\br_\bo_\bm
- Type: boolean
-
The Mutt-ng E-Mail Client 79
+ Type: boolean
+
Default: no
When _\bs_\be_\bt, Mutt-ng will try to derive the message's _\be_\bn_\bv_\be_\bl_\bo_\bp_\be sender from the
Default: ''
- This variable is a colon-separated list of character encoding schemes for text
-
The Mutt-ng E-Mail Client 80
+ This variable is a colon-separated list of character encoding schemes for text
file attatchments. If _\bu_\bn_\bs_\be_\bt, _\b$_\bc_\bh_\ba_\br_\bs_\be_\bt (section 6.3.24 , page 70) value will
be used instead. For example, the following configuration would work for
Japanese text handling:
%N
N if folder has new mail, blank otherwise
+ The Mutt-ng E-Mail Client 81
+
%s
size in bytes
- The Mutt-ng E-Mail Client 81
-
%t
* if the file is tagged, blank otherwise
Default: no
- This variable is similar to ``_\b$_\bs_\ba_\bv_\be_\b__\bn_\ba_\bm_\be (section 6.3.240 , page 123)'',
- except that Mutt-ng will store a copy of your outgoing message by the username
-
The Mutt-ng E-Mail Client 82
+ This variable is similar to ``_\b$_\bs_\ba_\bv_\be_\b__\bn_\ba_\bm_\be (section 6.3.240 , page 123)'',
+ except that Mutt-ng will store a copy of your outgoing message by the username
of the address you are sending to even if that mailbox does not exist.
Also see the ``_\b$_\br_\be_\bc_\bo_\br_\bd (section 6.3.229 , page 120)'' variable.
Default: no
- When _\bs_\be_\bt forwarded messages included in the main body of the message (when
- ``_\b$_\bm_\bi_\bm_\be_\b__\bf_\bo_\br_\bw_\ba_\br_\bd (section 6.3.135 , page 97)'' is _\bu_\bn_\bs_\be_\bt) will be quoted using
-
The Mutt-ng E-Mail Client 83
- ``_\b$_\bi_\bn_\bd_\be_\bn_\bt_\b__\bs_\bt_\br_\bi_\bn_\bg (section 6.3.108 , page 89)''.
+ When _\bs_\be_\bt forwarded messages included in the main body of the message (when
+ ``_\b$_\bm_\bi_\bm_\be_\b__\bf_\bo_\br_\bw_\ba_\br_\bd (section 6.3.135 , page 97)'' is _\bu_\bn_\bs_\be_\bt) will be quoted using
+ ``_\b$_\bi_\bn_\bd_\be_\bn_\bt_\b__\bs_\bt_\br_\bi_\bn_\bg (section 6.3.108 , page 90)''.
_\b6_\b._\b3_\b._\b7_\b3 _\bf_\br_\bo_\bm
This variable contains a default from address. It can be overridden using
my_hdr (including from send-hooks) and ``_\b$_\br_\be_\bv_\be_\br_\bs_\be_\b__\bn_\ba_\bm_\be (section 6.3.235 , page
- 121)''. This variable is ignored if ``_\b$_\bu_\bs_\be_\b__\bf_\br_\bo_\bm (section 6.3.324 , page
+ 122)''. This variable is ignored if ``_\b$_\bu_\bs_\be_\b__\bf_\br_\bo_\bm (section 6.3.324 , page
144)'' is unset.
E.g. you can use send-hook Mutt-ng-devel@lists.berlios.de 'my_hdr From: Foo Bar
Type: boolean
- Default: no
-
The Mutt-ng E-Mail Client 84
+ Default: no
+
When _\bs_\be_\bt, this variable causes Mutt-ng to include the header of the message you
are replying to into the edit buffer. The ``_\b$_\bw_\be_\be_\bd (section 6.3.330 , page
145)'' setting applies.
Availability: Header Cache
- The _\b$_\bh_\be_\ba_\bd_\be_\br_\b__\bc_\ba_\bc_\bh_\be (section 6.3.77 , page 82) variable points to the header
+ The _\b$_\bh_\be_\ba_\bd_\be_\br_\b__\bc_\ba_\bc_\bh_\be (section 6.3.77 , page 83) variable points to the header
cache database.
- If _\b$_\bh_\be_\ba_\bd_\be_\br_\b__\bc_\ba_\bc_\bh_\be (section 6.3.77 , page 82) points to a directory it will con-
+ If _\b$_\bh_\be_\ba_\bd_\be_\br_\b__\bc_\ba_\bc_\bh_\be (section 6.3.77 , page 83) points to a directory it will con-
tain a header cache database per folder. If _\b$_\bh_\be_\ba_\bd_\be_\br_\b__\bc_\ba_\bc_\bh_\be (section 6.3.77 ,
- page 82) points to a file that file will be a single global header cache. By
+ page 83) points to a file that file will be a single global header cache. By
default it is _\bu_\bn_\bs_\be_\bt so no header caching will be used.
_\b6_\b._\b3_\b._\b7_\b8 _\bh_\be_\ba_\bd_\be_\br_\b__\bc_\ba_\bc_\bh_\be_\b__\bc_\bo_\bm_\bp_\br_\be_\bs_\bs
Default: no
When _\bs_\be_\bt, Mutt-ng will skip the host name part of ``_\b$_\bh_\bo_\bs_\bt_\bn_\ba_\bm_\be (section
- 6.3.88 , page 85)'' variable when adding the domain part to addresses. This
- variable does not affect the generation of Message-ID: header fields, and it
The Mutt-ng E-Mail Client 85
+ 6.3.88 , page 85)'' variable when adding the domain part to addresses. This
+ variable does not affect the generation of Message-ID: header fields, and it
will not lead to the cut-off of first-level domains.
_\b6_\b._\b3_\b._\b8_\b1 _\bh_\bi_\bd_\be_\b__\bl_\bi_\bm_\bi_\bt_\be_\bd
When _\bs_\be_\bt, Mutt-ng will not show the presence of missing messages at the top of
threads in the thread tree. Note that when _\b$_\bh_\bi_\bd_\be_\b__\bl_\bi_\bm_\bi_\bt_\be_\bd (section 6.3.81 ,
- page 83) is _\bs_\be_\bt, this option will have no effect.
+ page 84) is _\bs_\be_\bt, this option will have no effect.
_\b6_\b._\b3_\b._\b8_\b6 _\bh_\bi_\bs_\bt_\bo_\br_\by
Type: number
- Default: 10
-
The Mutt-ng E-Mail Client 86
+ Default: 10
+
This variable controls the size (in number of strings remembered) of the string
history buffer. The buffer is cleared each time the variable is changed.
capability string, e.g. ``digest-md5'', ``gssapi'' or ``cram-md5''. This param-
eter is case-insensitive.
+ The Mutt-ng E-Mail Client 87
+
If this parameter is _\bu_\bn_\bs_\be_\bt (the default) Mutt-ng will try all available meth-
ods, in order from most-secure to least-secure.
- The Mutt-ng E-Mail Client 87
-
Example: set imap_authenticators='gssapi:cram-md5:login'
N\bNo\bot\bte\be:\b: Mutt-ng will only fall back to other authentication methods if the previ-
Availability: IMAP
- You normally want to see your personal folders alongside your INBOX in the IMAP
- browser. If you see something else, you may set this variable to the IMAP path
-
The Mutt-ng E-Mail Client 88
+ You normally want to see your personal folders alongside your INBOX in the IMAP
+ browser. If you see something else, you may set this variable to the IMAP path
to your folders.
_\b6_\b._\b3_\b._\b9_\b5 _\bi_\bm_\ba_\bp_\b__\bk_\be_\be_\bp_\ba_\bl_\bi_\bv_\be
Default: 300
- This variable configures how often (in seconds) Mutt-ng should look for new
- mail in IMAP folders. This is split from the ``_\bm_\ba_\bi_\bl_\b__\bc_\bh_\be_\bc_\bk (section 6.3.114 ,
-
The Mutt-ng E-Mail Client 89
+ This variable configures how often (in seconds) Mutt-ng should look for new
+ mail in IMAP folders. This is split from the ``_\bm_\ba_\bi_\bl_\b__\bc_\bh_\be_\bc_\bk (section 6.3.114 ,
page 93)'' variable to generate less traffic and get more accurate information
for local folders.
Availability: IMAP
+ The Mutt-ng E-Mail Client 90
+
Controls whether or not Mutt-ng will try to reconnect to IMAP server when the
connection is lost.
- The Mutt-ng E-Mail Client 90
-
_\b6_\b._\b3_\b._\b1_\b0_\b3 _\bi_\bm_\ba_\bp_\b__\bs_\be_\br_\bv_\be_\br_\bn_\bo_\bi_\bs_\be
Type: boolean
Default: no
+ The Mutt-ng E-Mail Client 91
+
Controls whether or not Mutt-ng includes only the first attachment of the mes-
sage you are replying.
- The Mutt-ng E-Mail Client 91
-
_\b6_\b._\b3_\b._\b1_\b0_\b8 _\bi_\bn_\bd_\be_\bn_\bt_\b__\bs_\bt_\br_\bi_\bn_\bg
Type: string
date and time of the message in the format specified by ``date_for-
mat'' converted to the local time zone
+ The Mutt-ng E-Mail Client 92
+
%e
current message number in thread
- The Mutt-ng E-Mail Client 92
-
%E
number of messages in current thread
%t
`to:' field (recipients)
- %T
- the appropriate character from the _\b$_\bt_\bo_\b__\bc_\bh_\ba_\br_\bs (section 6.3.317 ,
-
The Mutt-ng E-Mail Client 93
+ %T
+ the appropriate character from the _\b$_\bt_\bo_\b__\bc_\bh_\ba_\br_\bs (section 6.3.317 ,
page 142) string
%u
_\b6_\b._\b3_\b._\b1_\b1_\b0 _\bi_\bs_\bp_\be_\bl_\bl
- Type: path
-
The Mutt-ng E-Mail Client 94
+ Type: path
+
Default: 'ispell'
How to invoke ispell (GNU's spell-checking software).
Default: ''
This variable specifies which files to consult when attempting to display MIME
- bodies not directly supported by Mutt-ng.
The Mutt-ng E-Mail Client 95
+ bodies not directly supported by Mutt-ng.
+
_\b6_\b._\b3_\b._\b1_\b1_\b6 _\bm_\ba_\bi_\bl_\bc_\ba_\bp_\b__\bs_\ba_\bn_\bi_\bt_\bi_\bz_\be
Type: boolean
up with an 'O' next to them in the ``index'' menu, indicating that they are
old.
+ The Mutt-ng E-Mail Client 96
+
_\b6_\b._\b3_\b._\b1_\b2_\b0 _\bm_\ba_\br_\bk_\be_\br_\bs
Type: boolean
- The Mutt-ng E-Mail Client 96
-
Default: yes
Controls the display of wrapped lines in the internal pager. If set, a ``+''
When _\bs_\be_\bt, the maximum line length for displaying ``format = flowed'' messages
is limited to this length. A value of 0 (which is also the default) means that
the maximum line length is determined by the terminal width and _\b$_\bw_\br_\ba_\bp_\bm_\ba_\br_\bg_\bi_\bn
- (section 6.3.332 , page 145).
+ (section 6.3.332 , page 146).
_\b6_\b._\b3_\b._\b1_\b2_\b3 _\bm_\bb_\bo_\bx
Default: '~/mbox'
This specifies the folder into which read mail in your ``_\b$_\bs_\bp_\bo_\bo_\bl_\bf_\bi_\bl_\be (section
- 6.3.294 , page 135)'' folder will be appended.
+ 6.3.294 , page 136)'' folder will be appended.
_\b6_\b._\b3_\b._\b1_\b2_\b4 _\bm_\bb_\bo_\bx_\b__\bt_\by_\bp_\be
Default: 0
+ The Mutt-ng E-Mail Client 97
+
This variable controls the number of lines of context that are given when
scrolling through menus. (Similar to ``_\b$_\bp_\ba_\bg_\be_\br_\b__\bc_\bo_\bn_\bt_\be_\bx_\bt (section 6.3.166 , page
106)''.)
- The Mutt-ng E-Mail Client 97
-
_\b6_\b._\b3_\b._\b1_\b2_\b6 _\bm_\be_\bn_\bu_\b__\bm_\bo_\bv_\be_\b__\bo_\bf_\bf
Type: boolean
Default: no
+ The Mutt-ng E-Mail Client 98
+
If _\bu_\bn_\bs_\be_\bt, Mutt-ng will remove your address (see the ``alternates'' command)
from the list of recipients when replying to a message.
- The Mutt-ng E-Mail Client 98
-
_\b6_\b._\b3_\b._\b1_\b3_\b1 _\bm_\bh_\b__\bp_\bu_\br_\bg_\be
Type: boolean
Also see ``_\b$_\bf_\bo_\br_\bw_\ba_\br_\bd_\b__\bd_\be_\bc_\bo_\bd_\be (section 6.3.68 , page 81)'' and ``_\b$_\bm_\bi_\bm_\be_\b__\bf_\bo_\br_\b-
_\bw_\ba_\br_\bd_\b__\bd_\be_\bc_\bo_\bd_\be (section 6.3.136 , page 97)''.
+ The Mutt-ng E-Mail Client 99
+
_\b6_\b._\b3_\b._\b1_\b3_\b6 _\bm_\bi_\bm_\be_\b__\bf_\bo_\br_\bw_\ba_\br_\bd_\b__\bd_\be_\bc_\bo_\bd_\be
Type: boolean
- The Mutt-ng E-Mail Client 99
-
Default: no
Controls the decoding of complex MIME messages into text/plain when forwarding
used with various sets of parameters to gather the list of known remailers, and
to finally send a message through the mixmaster chain.
+ The Mutt-ng E-Mail Client 100
+
_\b6_\b._\b3_\b._\b1_\b4_\b0 _\bm_\bo_\bv_\be
Type: quadoption
- The Mutt-ng E-Mail Client 100
-
Default: ask-no
Controls whether or not Mutt-ng will move read messages from your spool mailbox
%T
the current UNIX timestamp (decimal)
+ The Mutt-ng E-Mail Client 101
+
%X
the current UNIX timestamp (hexadecimal)
- The Mutt-ng E-Mail Client 101
-
%Y
the current year (Y2K compliant)
ers. If _\bu_\bn_\bs_\be_\bt, headers will not be saved at all and will be reloaded each time
when you enter a newsgroup.
+ The Mutt-ng E-Mail Client 102
+
As for the header caching in connection with IMAP and/or Maildir, this drasti-
cally increases speed and lowers traffic.
- The Mutt-ng E-Mail Client 102
-
_\b6_\b._\b3_\b._\b1_\b4_\b6 _\bn_\bn_\bt_\bp_\b__\bc_\ba_\bt_\bc_\bh_\bu_\bp
Type: quadoption
Availability: NNTP
This variable controls how many news articles to cache per newsgroup (if
- caching is enabled, see _\b$_\bn_\be_\bw_\bs_\b__\bc_\ba_\bc_\bh_\be_\b__\bd_\bi_\br (section , page )) and how many news
- articles to show in the ``index'' menu.
+ caching is enabled, see _\b$_\bn_\bn_\bt_\bp_\b__\bc_\ba_\bc_\bh_\be_\b__\bd_\bi_\br (section 6.3.145 , page 100)) and how
+ many news articles to show in the ``index'' menu.
If there're more articles than defined with _\b$_\bn_\bn_\bt_\bp_\b__\bc_\bo_\bn_\bt_\be_\bx_\bt (section 6.3.147 ,
page 101), all older ones will be removed/not shown in the index.
of tagged messages Mutt-ng will concatenate the messages and will pipe them as
a single folder. When _\bs_\be_\bt, Mutt-ng will pipe the messages one by one. In both
cases the messages are piped in the current sorted order, and the ``_\b$_\bp_\bi_\bp_\be_\b__\bs_\be_\bp
- (section 6.3.200 , page 113)'' separator is added after each message.
+ (section 6.3.200 , page 114)'' separator is added after each message.
_\b6_\b._\b3_\b._\b2_\b0_\b2 _\bp_\bo_\bp_\b__\ba_\bu_\bt_\bh_\b__\bt_\br_\by_\b__\ba_\bl_\bl
The Mutt-ng E-Mail Client 118
Controls whether or not messages are saved in the ``_\b$_\bp_\bo_\bs_\bt_\bp_\bo_\bn_\be_\bd (section
- 6.3.213 , page 116)'' mailbox when you elect not to send immediately.
+ 6.3.213 , page 117)'' mailbox when you elect not to send immediately.
_\b6_\b._\b3_\b._\b2_\b1_\b3 _\bp_\bo_\bs_\bt_\bp_\bo_\bn_\be_\bd
Default: yes
Controls whether or not empty lines will be quoted using ``_\bi_\bn_\bd_\be_\bn_\bt_\b__\bs_\bt_\br_\bi_\bn_\bg (sec-
- tion 6.3.108 , page 89)''.
+ tion 6.3.108 , page 90)''.
_\b6_\b._\b3_\b._\b2_\b2_\b3 _\bq_\bu_\bo_\bt_\be_\b__\bq_\bu_\bo_\bt_\be_\bd
Controls how quoted lines will be quoted. If _\bs_\be_\bt, one quote character will be
added to the end of existing prefix. Otherwise, quoted lines will be prepended
- by ``_\bi_\bn_\bd_\be_\bn_\bt_\b__\bs_\bt_\br_\bi_\bn_\bg (section 6.3.108 , page 89)''.
+ by ``_\bi_\bn_\bd_\be_\bn_\bt_\b__\bs_\bt_\br_\bi_\bn_\bg (section 6.3.108 , page 90)''.
_\b6_\b._\b3_\b._\b2_\b2_\b4 _\bq_\bu_\bo_\bt_\be_\b__\br_\be_\bg_\be_\bx_\bp
By default, this is the GECOS field from /etc/passwd.
_\bN_\bo_\bt_\be_\b: This variable will _\bn_\bo_\bt be used when the user has set a real name in the
- _\b$_\bf_\br_\bo_\bm (section 6.3.73 , page 81) variable.
+ _\b$_\bf_\br_\bo_\bm (section 6.3.73 , page 82) variable.
_\b6_\b._\b3_\b._\b2_\b2_\b8 _\br_\be_\bc_\ba_\bl_\bl
Default: ask-yes
Controls whether or not Mutt-ng recalls postponed messages when composing a new
- message. Also see ``_\b$_\bp_\bo_\bs_\bt_\bp_\bo_\bn_\be_\bd (section 6.3.213 , page 116)''.
+ message. Also see ``_\b$_\bp_\bo_\bs_\bt_\bp_\bo_\bn_\be_\bd (section 6.3.213 , page 117)''.
Setting this variable to _\by_\be_\bs is not generally useful, and thus not recommended.
Default: yes
This variable fine-tunes the behaviour of the _\br_\be_\bv_\be_\br_\bs_\be_\b__\bn_\ba_\bm_\be (section 6.3.235 ,
- page 121) feature. When it is _\bs_\be_\bt, Mutt-ng will use the address from incoming
+ page 122) feature. When it is _\bs_\be_\bt, Mutt-ng will use the address from incoming
messages as-is, possibly including eventual real names. When it is _\bu_\bn_\bs_\be_\bt,
Mutt-ng will override any such real names with the setting of the _\br_\be_\ba_\bl_\bn_\ba_\bm_\be
- (section 6.3.227 , page 119) variable.
+ (section 6.3.227 , page 120) variable.
_\b6_\b._\b3_\b._\b2_\b3_\b7 _\br_\bf_\bc_\b2_\b0_\b4_\b7_\b__\bp_\ba_\br_\ba_\bm_\be_\bt_\be_\br_\bs
Default: yes
When _\bu_\bn_\bs_\be_\bt, mailboxes which contain no saved messages will be removed when
- closed (the exception is ``_\b$_\bs_\bp_\bo_\bo_\bl_\bf_\bi_\bl_\be (section 6.3.294 , page 135)'' which is
+ closed (the exception is ``_\b$_\bs_\bp_\bo_\bo_\bl_\bf_\bi_\bl_\be (section 6.3.294 , page 136)'' which is
never removed). If _\bs_\be_\bt, mailboxes are never removed.
N\bNo\bot\bte\be:\b: This only applies to mbox and MMDF folders, Mutt-ng does not delete MH
%C
CA location: Depending on whether _\b$_\bs_\bm_\bi_\bm_\be_\b__\bc_\ba_\b__\bl_\bo_\bc_\ba_\bt_\bi_\bo_\bn (section
- 6.3.265 , page 128) points to a directory or file, this expands to
- '-CApath _\b$_\bs_\bm_\bi_\bm_\be_\b__\bc_\ba_\b__\bl_\bo_\bc_\ba_\bt_\bi_\bo_\bn (section 6.3.265 , page 128)' or
- '-CAfile _\b$_\bs_\bm_\bi_\bm_\be_\b__\bc_\ba_\b__\bl_\bo_\bc_\ba_\bt_\bi_\bo_\bn (section 6.3.265 , page 128)'.
+ 6.3.265 , page 129) points to a directory or file, this expands to
+ '-CApath _\b$_\bs_\bm_\bi_\bm_\be_\b__\bc_\ba_\b__\bl_\bo_\bc_\ba_\bt_\bi_\bo_\bn (section 6.3.265 , page 129)' or
+ '-CAfile _\b$_\bs_\bm_\bi_\bm_\be_\b__\bc_\ba_\b__\bl_\bo_\bc_\ba_\bt_\bi_\bo_\bn (section 6.3.265 , page 129)'.
The Mutt-ng E-Mail Client 131
When sorting by threads, this variable controls how threads are sorted in rela-
tion to other threads, and how the branches of the thread trees are sorted.
- This can be set to any value that ``_\b$_\bs_\bo_\br_\bt (section 6.3.288 , page 133)'' can,
+ This can be set to any value that ``_\b$_\bs_\bo_\br_\bt (section 6.3.288 , page 134)'' can,
except threads (in that case, Mutt-ng will just use date-sent). You can also
specify the ``last-'' prefix in addition to ``reverse-'' prefix, but last- must
come after reverse-. The last- prefix causes messages to be sorted against its
first, if you have set sort=reverse-threads.)
- N\bNo\bot\bte\be:\b: For reversed ``_\b$_\bs_\bo_\br_\bt (section 6.3.288 , page 133)'' order _\b$_\bs_\bo_\br_\bt_\b__\ba_\bu_\bx
+ N\bNo\bot\bte\be:\b: For reversed ``_\b$_\bs_\bo_\br_\bt (section 6.3.288 , page 134)'' order _\b$_\bs_\bo_\br_\bt_\b__\ba_\bu_\bx
(section 6.3.290 , page 134) is reversed again (which is not the right thing
to do, but kept to not break any existing configuration setting).
to _\b$_\bs_\bt_\ba_\bt_\bu_\bs_\b__\bc_\bh_\ba_\br_\bs (section 6.3.301 , page 137)
%s
- current sorting mode (_\b$_\bs_\bo_\br_\bt (section 6.3.288 , page 133))
+ current sorting mode (_\b$_\bs_\bo_\br_\bt (section 6.3.288 , page 134))
%S
current aux sorting method (_\b$_\bs_\bo_\br_\bt_\b__\ba_\bu_\bx (section 6.3.290 , page
Default: no
If _\bs_\be_\bt, threading will only make use of the ``In-Reply-To:'' and ``Refer-
- ences:'' header fields when you ``_\b$_\bs_\bo_\br_\bt (section 6.3.288 , page 133)'' by mes-
+ ences:'' header fields when you ``_\b$_\bs_\bo_\br_\bt (section 6.3.288 , page 134)'' by mes-
sage threads. By default, messages with the same subject are grouped together
in ``pseudo threads.'' This may not always be desirable, such as in a personal
mailbox where you might have several unrelated messages with the subject ``hi''
Default: '\([Ww][Aa][RrSs]: .*\)[ ]*$'
- When non-empty and _\b$_\bs_\bt_\br_\bi_\bp_\b__\bw_\ba_\bs (section 6.3.307 , page 140) is _\bs_\be_\bt, mutt-ng
+ When non-empty and _\b$_\bs_\bt_\br_\bi_\bp_\b__\bw_\ba_\bs (section 6.3.307 , page 141) is _\bs_\be_\bt, mutt-ng
will remove this trailing part of the ``Subject'' line when replying if it
won't be empty afterwards.
like ordinary text. To actually make use of this format's features, you'll
need support in your editor.
- Note that _\b$_\bi_\bn_\bd_\be_\bn_\bt_\b__\bs_\bt_\br_\bi_\bn_\bg (section 6.3.108 , page 89) is ignored when this
+ Note that _\b$_\bi_\bn_\bd_\be_\bn_\bt_\b__\bs_\bt_\br_\bi_\bn_\bg (section 6.3.108 , page 90) is ignored when this
option is set.
_\b6_\b._\b3_\b._\b3_\b1_\b2 _\bt_\bh_\bo_\br_\bo_\bu_\bg_\bh_\b__\bs_\be_\ba_\br_\bc_\bh
Default: 'M%?n?AIL&ail?'
Controls the format of the X11 icon title, as long as _\b$_\bx_\bt_\be_\br_\bm_\b__\bs_\be_\bt_\b__\bt_\bi_\bt_\bl_\be_\bs (sec-
- tion 6.3.337 , page 146) is _\bs_\be_\bt. This string is identical in formatting to the
+ tion 6.3.337 , page 147) is _\bs_\be_\bt. This string is identical in formatting to the
one used by ``_\b$_\bs_\bt_\ba_\bt_\bu_\bs_\b__\bf_\bo_\br_\bm_\ba_\bt (section 6.3.302 , page 137)''.
_\b6_\b._\b3_\b._\b3_\b3_\b6 _\bx_\bt_\be_\br_\bm_\b__\bl_\be_\ba_\bv_\be
Default: ''
- If _\b$_\bx_\bt_\be_\br_\bm_\b__\bs_\be_\bt_\b__\bt_\bi_\bt_\bl_\be_\bs (section 6.3.337 , page 146) is _\bs_\be_\bt, this string will be
+ If _\b$_\bx_\bt_\be_\br_\bm_\b__\bs_\be_\bt_\b__\bt_\bi_\bt_\bl_\be_\bs (section 6.3.337 , page 147) is _\bs_\be_\bt, this string will be
used to set the title when leaving mutt-ng. For terminal-based programs,
there's no easy and portable way to read the current title so mutt-ng cannot
read it upon startup and restore it when exiting.
- Based on the xterm FAQ, the following might work: set xterm_leave = '`test
+ Based on the xterm FAQ, the following might work:
The Mutt-ng E-Mail Client 148
- x_\bD_\bI_\bS_\bP_\bL_\bA_\bY (section , page ) != x && xprop -id _\bW_\bI_\bN_\bD_\bO_\bW_\bI_\bD (section , page ) | grep
- WM_NAME | cut -d ''' -f 2`'
+ set xterm_leave = '`test x$DISPLAY != x && xprop -id $WINDOWID | grep WM_NAME |
+ cut -d ''' -f 2`'
_\b6_\b._\b3_\b._\b3_\b3_\b7 _\bx_\bt_\be_\br_\bm_\b__\bs_\be_\bt_\b__\bt_\bi_\bt_\bl_\be_\bs
Default: 'Mutt-ng with %?m?%m messages&no messages?%?n? [%n New]?'
Controls the format of the title bar of the xterm provided that
- _\b$_\bx_\bt_\be_\br_\bm_\b__\bs_\be_\bt_\b__\bt_\bi_\bt_\bl_\be_\bs (section 6.3.337 , page 146) has been _\bs_\be_\bt. This string is
+ _\b$_\bx_\bt_\be_\br_\bm_\b__\bs_\be_\bt_\b__\bt_\bi_\bt_\bl_\be_\bs (section 6.3.337 , page 147) has been _\bs_\be_\bt. This string is
identical in formatting to the one used by ``_\b$_\bs_\bt_\ba_\bt_\bu_\bs_\b__\bf_\bo_\br_\bm_\ba_\bt (section 6.3.302 ,
page 137)''.
Kari Hurtta <kari.hurtta@fmi.fi> co-developed the original MIME parsing code
back in the ELM-ME days.
- The following people have been very helpful to the development of Mutt-ng:
+ The following people have been very helpful to the development of Mutt:
Vikas Agnihotri <vikasa@writeme.com>,
Vsevolod Volkov <vvv@lucky.net>,
- Ken Weinert <kenw@ihs.com> Andreas Krennmair <ak@synflood.at> Nico Golde
- <nico@ngolde.de> Rocco Rutte <pdmef@cs.tu-berlin.de>
+ Ken Weinert <kenw@ihs.com>
+
+ Mutt-ng is developed by the following people:
+
+ Andreas Krennmair <ak@synflood.at>
+
+ Nico Golde <nico@ngolde.de>
+
+ Rocco Rutte <pdmef@cs.tu-berlin.de>
+
+ The following people have been very helpful to the development of Mutt-ng:
+
+ Iain Lea <iain@bricbrac.de>
+
+ Andreas Kneib <akneib@gmx.net>
+
+ Carsten Schoelzki <cjs@weisshuhn.de>
+
+ Elimar Riesebieter <riesebie@lxtec.de>
_\b7_\b._\b2 _\bA_\bb_\bo_\bu_\bt _\bt_\bh_\bi_\bs _\bd_\bo_\bc_\bu_\bm_\be_\bn_\bt
+ The Mutt-ng E-Mail Client 159
+
This document was written in SGML, and then rendered using the sgml-tools pack-
age.
- The Mutt-ng E-Mail Client 159
+ The Mutt-ng E-Mail Client 160
CONTENTS
projects / apps / madmutt.git / blobdiff